Setting in Query not reflected on Crystal
cyrstal Report created on top of BEx query, have following integration issue:
1) 0Vendor is Free Characteristic in Query. I have assigned the default value 03178 to the 0Vendor. When query is run, it is restricted to vendor 03178 by default, and user still can change it.
However, in Crystal Report, the filter disappear. There is no restriction of vendor 03178. Why?
2) I have a structure in Query. One of the Formula field is set to "Hidden". So this field (Formula) is not display when query is run.
In crystal report, I have place the Structure in the Detail section. When I run the report, I still can see this field (Formula) on the result. Why?
on item #1 simply because Crystal REports doesn't support the default configured in the BEx query. You shouldn't compare BEx Analyzer with Crystal Reports in terms of functionality. Crystal Reports is a tool for layout driven reports and not a tool for interactive analysis.
This seem to me is a bug. It has been recommended to build the Crystal Report on top of Query because we have more flexibility such like filter/default etc on the query. And then we can do the formating on the Crystal Report. But now Crystal Report did not produce the correct result, what's the point to have nice formatting?
on item #2 - Hidden keyfigures are shown in the Field Explorer in Crystal Reports and you can decide in Crystal Reports to include them into the report or not.
This field is part of my Structure defined in Query Designer ->Row section.
There are 3 formula in the Structure. Two of them is set to display (in the Properties), one is Hidden.
In Crystal Report, I drag-and-drop this "Structure" into the Detail section. I have no control or see the detail (the 3 formula) in the Structure as I can see only "Structure" element in the Field Explorer.
Is this bug?
Edited by: mypmmh on May 12, 2011 5:38 AM
Similar Messages
-
Changes to Query not reflected in views
We want to use various views off of a 'master' query to publish in our portal. I was working on the assumption that an advantage of the views was that if a change needed to be made it could be made in the query and then all the views off of that query would reflect the change. However I have discovered that some changes made in the query do not get reflected in the views. For example if I change the scaling on a key figure, this change does not get reflected in the views. In one case, as a test, I modified a formula in the query and also changed the scaling. The view reflected the modified calculation but did not reflect the new scale.
Does anyone know how to force these type of changes or is there documentation that at least list those changes made to the query that will not get reflected in the views?
Any help would be appreciated.
Stan PickfordHi Stan,
in general: Everything which belongs to the query view object won't be overwritten by query changes.
What belongs to the query view object? Basically everything you can change during execution of a query (Dynamic filters, Drill-Down-State, Properties of characteristics, structure elements (keyfigures) and Query-View).
What does not belong the query-view object: Definition of structure elements, Navigation space (characteristics available during runtime), Static filters.
Heike -
Query Not reflected with Updated Data
Dear Experts,
I am facing a Problem in query data updation. Data has been daily updating in infoprovider successfully ,But when user run query through Bex he is always shown old data. Then I go to RSRT and generate the query and data got updated.
Every Time for new data updation I need to Generate the query.
What could be reason for this. Is this related to cache data ?
Any Advise .
Thanks in Advance.Dear Michael,
This problem is coming only for one Multiprovider. Running this program would affect all other queries also . This will Delay the reporting.
Any other reason why query is reflected with old data Though infoprovide is loaded with new data. -
Query in MSS does not reflect selection on period
Hi group,
I have made a query in global area. In MSS I am calling the generated program from the query. This works fine. However, the selection on period in MSS does not reflect on the report. No matter what I choose, the report gives me the date period that I have set up in my variant in the background.
The selection screen for the report is the standard delivered with LDB PNPCE.
I have tried different date setup in my variant, but no matter what I do, I am not able to choose dynamically period from MSS.
Any help is appreciated
KirstenSolved this by saving the variant without passing values.
-
LOV in Picklist is not reflected with Value Set maintained.
Value set A is contained the latest/updated list of Responsibility Center. Wheres one of the Picklist in Employee Self Service(OTL) which showing the lists of Responsiblity Center which query/calling the values maintained in Value Set A. However, the list of values does not contain the latest information which being maintained in Value Set A. On the other hand, when query from backend table for the Picklist function, the updated value in Value Set A is there.
Additional Infomation: Apache and application was bounced but the result still the same.
Please advice. Thanks.Hi Hussien,
For your information, it is Release 12.1.1, db version is 10.2.0.4 and platform version is Oracle Solaris on SPARC (32-bit).
The article that you have provided does not applicable. This is only happen to the Cost Center LOV in the picklist which does not reflected even there is no end date in Value Set maintained.
Please advice. Thanks.
Regards,
CF -
Bex Query not passing all rows to Crystal reports
hello experts,
i have created a bex query that shows all employees from the master data table and links to the cats table to show absence hours...
in bex, all employees are showing and some of the employees have hours showing for sick time. this is known as a left outer join.
i have created a report in crystal with this bex query and it does not show rows from the master data that do not have a link to the cats table. only the rows that have a link to the cats table are showing up. (this is compared to a inner join)
the reason i need the master data from the employee table is that the users want to divide the total hours off(sick time) per department by the total employees in that department.
here is the sql query from crystal that was created automatically when i used the bex query to created the crystal report.
SELECT {Measures.4J8L2TQJ3P517ISQ1R4Y8UZ36, Measures.4J9PY3UANRIW2HW15YSOED92A, Measures.4J9TLIO0NDQROSA2YONCW6HB6}
ON COLUMNS,
NON EMPTY
CROSSJOIN(0EMPLOYEE.LEVEL01.MEMBERS, 0EMPLOYEE__0COMP_CODE.LEVEL01.MEMBERS)
DIMENSION PROPERTIES 0EMPLOYEE.50COMP_CODE, 0EMPLOYEE.50MAST_CCTR ON ROWS
FROM ZCATS_MC1/ZZCATS_MC1_Q001C
SAP VARIABLES 0I_DAYS INCLUDING 0CALDAY.20100502 : 0CALDAY.20100903
i am using the mdx driver, and the integration kit is 2.8.
any thoughts?
thanks,
erikThanks Ingo for the quick response.
this sounds like a limitation in the integration between bex and crystal because the query shows the correct data and the crystal reports does not. i have tried to add a calculated key figure to all the rows and put a number in it but it still does not show the rows in crystal.
my issue is that they(the business users) want to know all the employees in the employee master data along with all the sick / illness data.
do you have a suggestion for this issue?
do you think that the mdx driver should be updated to allow master data to flow to crystal?
thx,
Erik -
Date Customer Exit in the query is not reflecting in the workbook
Hello.
We have a BI 7.0 Query where we have a restriction for req del date and billing date to show the month of current date - 2.
We have written 2 customer exit variables and we have restricted the same. The query is working well.
For Broadcasting, we have created a workbook for this query and saved it under a role.
The workbook is fine running for the current month., But if the month changes to the next, the workbook is not reflecting the same.
Still only Old dates are available in the workbook.
Please let me know if i am doing any mistakeHi Karthik,
If the customer exit variable is of type i_step = 1, ie if it is a manual entry variable as well, then this will not get updated based on teh month of execution.
Kindly check the article below for info.
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/enterprise-data-warehousing/how%20to%20update%20variable%20values%20in%20broadcast%20settings%20dynamically.pdf
Regards.
Shafi. -
Changes in Crystal reports are not reflecting after publishing
Dear SDN Mates,
We are facing problem with Crystal reports. After making the changes in the crystal reports, it is not reflecting in the portal after publishing. Still it is showing the older version of the report.
Can anyone please help me on this.
Thanks and Regards
Arun SHello Prathamesh,
After publishing the report, we require some changes in the report and doing some modifications in crystal report and again we are publishing this report. After publishing the report for second time, those changes are not reflecting in the BOE portal.
This is happening for all reports. Can you please suggest me on this.
Thanks and regards
Arun S -
Query changes are not reflecting
Hi All,
Scenario: We have changed in Query from Query Designer in BED system and moved to Quality system but the changes are not reflecting. After checking tables RSRREPDIR and RSZCOMPDIR, we found out the information as below:
Note: Production System - BEP
Quality - BEQ
Development - BED
We have 2 issues with Queries in different systems as below:
Issue 1: Query name: T01
Issue 2: Query name: T02
Issue1:
Table - RSRREPDIR
BEP -
COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M (also present in table - RSZCOMPDIR)
GENUNID : 4U2QC61SREY9HKJFVEHM894CU
BEQ -
COMPUID : 4T6BTKW1X3RYN7H2UO4WMLWLQ (also present in table - RSZCOMPDIR)
GENUNID : 4T6BUM0LKCPAO5H71ZG983P72
COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M (also present in table - RSZCOMPDIR)
GENUNID : 4U2QC61SREY9HKJFVEHM894CU
BED -
COMPUID : 4T6BTKW1X3RYN7H2UO4WMLWLQ (also present in table - RSZCOMPDIR)
GENUNID : 4T6BUM0LKCPAO5H71ZG983P72
COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M (not present in table - RSZCOMPDIR)
GENUNID : 4U2QC61SREY9HKJFVEHM894CU
Issue2:
Table - RSRREPDIR
BEP -
COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6 (also present in table - RSZCOMPDIR)
GENUNID : 4U188U6N2623QPCTMC43MFOZY
BEQ -
COMPUID : 4T6MDKABLUBC46HOKZMC0K6KU (also present in table - RSZCOMPDIR)
GENUNID : 4T6MEWPZ6178KB4LDKDREY34E
COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6 (also present in table - RSZCOMPDIR)
GENUNID : 4U188U6N2623QPCTMC43MFOZY
BED -
COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6 (not present in table - RSZCOMPDIR)
GENUNID : 4U188U6N2623QPCTMC43MFOZY
but in Table - RSZCOMPDIR
BED -
COMPUID : 4T6MDKABLUBC46HOKZMC0K6KU
GENUNID : 4T6MEWPZ6178KB4LDKDREY34E.
Please suggest which query element and from which table we should remove to have a sync with all systems.
Thanks in advance!!
Regards,
Niranjan ChechaniIf possible can u Compare Bex queries in All 3 systems Using RSRTQ tcode, Either they are matching or not?
How to compare using RSRTQ u can Refer Below :
Compare Bex Queries in Different Client /System.
Regards,
Seshu.P -
Changes to the infoobject are not reflecting in the query Desinger level.
Hi All,
We removed some Attributes to one characteristic and transported into QA.
The removed attributes are not getting in BEx query designer in Dev, But we are getting those removed attributes in the context menu of that particular Char in BEx Designer in QA.
We checked in the Characteristic level, those removed Attributes are not there in Info object level but still those Attributes are displaying in BEx designer level in QA.
And info object showing as gray color even though we activated the info object, We think this may be the cause to not reflect the changes to BEx Designer level.
Can any one suggest us to resolve the issue.
Thanks & Regards,
Raju. EHi Raju
Go to transation RSRT enter one of the reports and click to Generate Report. If this solves your problem then you can go to Environment\generate queries directly to regenerate the impacted queries.
Cheers
Tansu -
Query changes are not reflecting in the Workbook.
Hi All,
I have modified the query by adding attributes. But the changes are not reflecting in the workbook.
Do i need to insert the query again in the workbook or is there any option that will reflect the changes in the workbook
Thanks in Advance,
Suneel.Hello Suneel,
if you insert the query again, it will work, but it is not the best way to delegate the query changes to the workbook.
Just open your query from within your workbook (BEx menu 'change global definition') and use the green button at the top left in order to transfer the new query structure to the workbook. The query will be executed and you should see the changes.
Don't forget to save the workbook afterwards.
Regards,
Kirill -
Query condition not reflected in VC model
Hello,
I have a query that has a condition that allows the user to view the Top N of a key figure by entering the desired "N" amount. When I run the query on its own, it works as expected. If I enter 5, I see the top 5 results.
I have put this query into VC with an input form that allows the user to designated the desired number of results, but now the results do not reflect the condition and just show all the results for that key figure. Any suggestions?Hi Ravi,
Can you please share how did you resolve this as we are facing same problem.
Really appriciate your help.
Regards,
Dipesh. -
Regarding Conditions not reflecting in Herarchy query
Hi Gurus,
I have a scenario where i have created query on a multiprovider. In the query designer i have selected infoobjects like <b>region code, Director</b> ... and in columns i have selected <b>mileage,</b> .....i have also selected in the Rows as <b>Expand as Hierarchy</b>.
The query is working fine. But the Conditions i have specified for mileage < 0 or anyother condition reflects only for region level. But it is not reflecting for Director level and subsequent lower level like manager..... In the condition i have selected for all characteristics.
Kindly guide me to reslove the issues.
Regards,
ManoMano,
Depending on the characteristics you have in your report you will need to change the Conditions to look at the mixture of individual characteristics rather than All characteristics in the drill down independently.
Open up the conditions dialogue box and make the relevant section in the "Evaluate the conditions displayed below for:"
Regards
Gill -
BW Query does not load to Crystal Report
Hi,
I'm trying to create a Crystal Report based on existing SAP BW queries. I followed the steps provided after installing the SAP Integration Kit. Checked 'Use MDX driver with support for multiple structures'.
On SAP menu > Create New Report from a Query.
Managed to login to the SAP server using my Logon credentials. Select the BW query and click OK.
The problem I have here is that the query never loads into Crystal Report with the Field Explorer. The cursor shows that the query is loading. I've tried on two different queries and it never loads unfortunately.
Please let me know if I missed out any steps or there are some issues with the connectivity. Any suggestions or ideas are appreciated. Thank you.Also you can view
Re: Function module "/CRYSTAL/MDX_GET_STREAM_INFO" not found.
Preview error function module "CRYSTAL/MDX_GET_STREAM_INFO" not found
Hope it helps.
Regards
Lalit k Tyagi -
Query Customization Not Reflecting in POWL WD ABAP
Hello All,
We are customizing Powl in MSS for CATS and Leave Management. Changes done in POWL_QUERY are not reflecting in POWL Application.
In MSS we have done following customization in POWL:
We are using query MSS_POWL_CATS_APPROVAL_1 for CATS approval and we are enabling search criteria through query parameters by
ticking search checkbox. We have also cleared powl cache by running POWL_D01.
2. Changes done in Powl_Query transaction are not getting reflected in Powl Application.
We have changed the Admin layout in leave approval query MSS_POWL_LEA_APPROVAL using configuration mode ( sap-config-mode
= config ) in layout variant and assigned a new layout to leave approval and cleared cache (POWL_D01 report) but still changes are not reflected in POWL.
Looking forward for your support. Any help will be highly appreciated
Regards,
Nishant GaurHi.
Please try.
SQ01
Input query ID.
menu-Query-More functions-Generate program
Maybe you are looking for
-
Error 1638 - iPhone software update server can not be contacted.
Hi, I can't update my iPhone iOS to 4.3.3 with iTunes since a few months i still have the 4.3 version. I am using iTunes with an iMac with all software updated. I am getting the error "iPhone software update server can not be contacted..." I made a f
-
How do I upgrade my hard drive for my iMac
My 3TB fusion HD died yesterday. This is my very first MAC computer. it failed exactly 2 years and 4 months of use. Glad I got the 3 year Apple care. Now I am sour on fusion drive. Can I upgrade my iMac to a SSD? I will pay the up charge to get one
-
This has been the worst cloud app experience I've ever seen. First of all the CC app overwrites the Adobe Download Manager to the point where you'll never be able to go back to it again. I would normally be OK with this, but the CC app doesn't work a
-
Hi, I did some changes to some column and set as system wide default for that column in dev. 1. for example there are 20 existing reports using this column. does this format applicable to existing reports? 2. How can I migrate this system wide defaul
-
Extended program check - The program ZZZ does not exist as a main program
Program ZZZ is the Include program of program AAA. I dont understand this error on Extended program check."The program ZZZ does not exist as a main program"