Setting up remotely

I have a few basic pages that on my local machine are
working.
index.cfm which has a register link and login form
register.cfm, linked from the index.cfm that inserts into
medrec.users
addbiographical.cfm that updates medrec.users table
these are set up in dreamweaver 8 with coldfusion developer.
My datasource is medrec and datasource variable name is
Request.DSN. Here is some of the code from index.cfm.
The folks at register.com have setup a datasource and the
info they provided is as follows:
DSN: medrec_preventmd_net
Database Type: Access
Database Name: medrec.mdb
Language: ColdFusionMX
I need some direction on how to make changes to the code to
connect and query the datasource on the remote server. And is there
a way to set up future pages locally and test and put them remotely
with minimal coding changes. Thanks in advance for your help, I
apologize for my newbieness. As a side note I have watched the
video tutorials from lynda.com "Learning Coldfusion" and
"Dreamweaver 8 Dynamic Development" and find them to be quite
informative but of course they can't address every question/problem
and that is why I look to you.

See the tech note at
Dreamweaver writes full
path to Access database table in data source code when using
ColdFusion MX 7.0.1
Also, there will be issues with user account permissions on
your remote server by the admin account on your web server under
which you installed ColdFusion. You will probably have to install
CF under an account that has the appropriate access permissions on
your remote server in order to access the Access database file on
that server.
Phil

Similar Messages

  • Setting up Remote Desktop Apps for access from a Mac with 2FA

    Hi
    Setting up Remote Desktop Apps for access from a Mac with 2FA.
    I have a server 2012 remote access gateway, with remote apps published(which uses single signon), behind a 2FA connection (web based) and want to know if its possible to allow macs to connect to the remote Apps behind it. i cannot permanently remove any
    of the above setup as it is a requirement.
    When i connect from a mac i can login to both the 2FA and remote access web pages and see all the apps but when i click on any app it downloads it to the mac and when i try to run it using Remote Desktop App for MAC i get an error :
    "httpendpointexception: 4, The non-proxy http connection failed to connect with the message: 500 internal Server Error."
    I have tried with 2fa turned off for testing and get the same result.Does it support 2012 TSGW server? does it support Remote desktop apps? as i cant find a definitive answer on either.
    Thanks in advance for any advice.

    Hi,
    Thank you for posting in Windows Server Forum.
    From Error description it seems to be a communication issue between your Mac and your RD gateway server. If you connect from extranet, you may need Remote Desktop Gateway or a VPN/Direct Access connection to your intranet, or forward port 3389 on your router.
    500 Internal Server Error seems to be a HTTP related error. 
    The HTTP status code in IIS 7.0, IIS 7.5, and IIS 8.0
    Also, please double check the settings if you have a RD gateway implemented in you intranet.
    http://redmondmag.com/articles/2013/12/24/rd-gateway-in-windows-server.aspx
    In Windows Server 2012 R2 RD Gateway pluggable authentication is also introduced. This allows custom authentication routines to be used with RD Gateway. For example building a two-factor solution on top of RD Gateway is now possible which allows doing token-authentication
    to the RD Gateway which works seamlessly with RD Web Access or RDP file launching.
    Please check below article for more information.
    Windows Server 2012 R2 is coming what does this add to RDS – VDI
    In addition, please provide the log file from the client for further research.
    Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Set up Remote Access for Mac Mini

    I recently bought a Mac Mini and set it up at home. It is running on Mac OS X 10.8.3, and runs on Server 2.2.1 and Airport Utilities 6.2. I would like to be able to access the Mac Mini server from outside my home. Does anyone know the procedure of setting up remote access (through SSH or VPN) without creating an internet domain name? Thanks!
    I'm quite new to many of the Apple products, so it would be good if the answers are clearer and more detailed. Thanks!

    As Barney-15E says, Back-to-My-Mac is the best option.
    After that, try TeamViewer.com
    ssh can be done, but there are setup details with respect to your home router to allow port 22 from the Internet side to your Mac mini <http://portforward.com>.  And then you will need a dynamic DNS name from someone like No-IP.com or DynDNS.org so you can find your home router.  Once you have that setup, you should make sure you use a good strong password, as you have now exposed a known port to the internet <http://xkcd.com/936/> and <https://www.grc.com/haystack.htm>.  Don't forget to enable System Preferences -> Sharing -> Remote Login.  So now you can ssh, but what do you want to do with that?  You can create ssh tunnels for VNC screen sharing and AFP file sharing.
    ssh -L 22590:localhost:5900 -L 22548:localhost:548 [email protected]
    Now you have logged in and you have 2 tunnels.  How to use them.
    Finder -> Go -> Connect to server -> vnc://localhost:22590
    Finder -> Go -> Connect to server -> afp://localhost:22548
    Back-to-My-Mac and/or TeamViewer.com are easier

  • How does one set up remote access via the internet to access files stored on the Time Capsule using airport utility 6.1

    I was just wondering if anyone can provide me with instructions please on how to set up remote access via the internet to the time capsule when away from home?
    I am running OS X Mountain Lion operating system and have Airport Utility 6.1.
    Many thanks to you all for your help.

    I think the instructions should be all in BTMM with iCloud.
    Instructions are all there.
    http://support.apple.com/kb/ht3486

  • Help need setting up remote desktop (on a router)

    hey networking pros,
    I have major trouble setting up remote login (remote desktop).
    Specification : OSX tiger, LINKSYS
    now i have managed to use tightVNC and manage remote desktop BUT that was when i was on the same network. Now my laptop lies at home and at school (work) i have windows running and want to access my mac at home. I cant manage to do that. Since i am on a different network and that i have router at home and also i do not use air port express (i use a linksys)
    I need a static ip which in need to know the DNS servers (adelphia dosent give that to me since i am not a business customer). I have enabled port forwarding (5900) i have even set up an an account with dysDNS.org (i dunno how that helped).
    can some one please give me with step by step instruction.
    thanks

    You already have most of what you need, but you do need a little more understanding of what you're doing.
    Keep in mind that the Microsoft Remote Desktop Connection client is one-way only. You can connect from a Mac to a Window XP Professional computer, but not from Windows XP Pro to Mac OS X. What I describe below is how to connect from a Mac on the Internet to a Windows XP Pro computer at home.
    First, Remote Desktop may look like VNC, but it's not the same thing. Therefore, port 5900, which works with VNC, won't work for Remote Desktop. You'll want to port forward 3389 to make this work. When you go to your router and make this port forward entry, you'll enter the IP address of the machine you want to direct all RDC traffic to. This gets the RDC traffic from your router to your computer.
    You went to DynDNS.org to help you find your router on the Internet. The IP address, as you've researched, can change. But if you set up your router to report its IP address to DynDNS then you can always connect to your router by name. You don't have to keep track of your IP address changing. DynDNS will do this for you. This gets the RDC traffic from you to your router.
    So, the steps are:
    1. Set up a DynDNS.org account and you'll give yourself a name such as "myrouter" so that you can use a name like "myrouter.homeip.net" to connect to your home network.
    2. On your router, port forward all incoming Internet 3389 traffic to the IP address and port 3389 of your computer.
    3. On your Windows XP Pro computer (you can't do this with Windows XP Home) enable the Remote Desktop Connection software (right-click My Computer --> Properties --> Remote tab --> select the second checkbox).
    4. From a Mac somewhere on the Internet, open the RDC client and enter the DynDNS name you gave yourself and click the Connect button.
    5. Your Mac will contact DynDNS and get your current IP address.
    6. Your Mac will then connect to your home router, which will forward all RDC traffic (coming in on port 3389) to your Windows computer in your home.
    Hope this helps! bill
    1 GHz Powerbook G4   Mac OS X (10.4.4)  

  • WVC80N software "unable to set up remote viewing" with TZO

    I've researched this all night and I'm now begging for help.
    I've got the camera all set up and I can view it while on the local network.  The problem comes in when I try to sign up for the 90-day free TZO trial that comes with the camera to try to get remote viewing on my iPhone.  I progress through the Linksys setup software (as is detailed here: http://www.tzo.com/MainPageSupport/HowToPage/LinksysHomeMonitoringNCameraTutorial.html) and between steps 7 and 8, I get a screen that says "Unable to set up remote viewing" with my network, click this link to learn how to remotely view your camera.  The link takes me to a page on the TZO site that says "Oops, there was an unknown error with setting up you camern for remote access" and nothing else.  It seems to die on the "Configuring Internet Server" step.
    Within the camera's setup page, there's a link to the TZO website that tells me that because I have a WVC80N, I have to use the setup CD to set up the 90-day free trial, which fails as described above.
    I've set the camera to have a fixed IP of 192.168.1.200
    I've set the Alternative Web Access Port to 1024
    In Port Range Forwarding in the router, I've set 1024 to 1024 to forward to 192.168.1.200 (not sure exactly what this does)
    The router is a WRT160N
    Any ideas?

    Have you tried getting in touch with TZO and set the DDNS up the old fashioned way?  I also know that TZO has a beta going on of a new IP camera application for remote viewing and this may also help.  Not sure why the setup is failing though, but oook is probably right, something wacky with the router, IP or ISP that the setup software just doesn't like.
    http://www.MyHomeServer.com
    Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming

  • Can i set up remote desktop with my Mac Air and Windows 7 HP desktop?

    I am wanting to set up remote desktop with my Mac Air and HP windows 7 home edition desktop.  Is this possible and how do I begin setting this up?
    Thanks for the help!

    There is an app in the Mac App Store to use Microsoft Remote Desktop with a Mac: https://itunes.apple.com/us/app/microsoft-remote-desktop/id715768417?mt=12
    But according to their support site it requires Pro, Enterprise, or Ultimate in the Windows 7 side. http://technet.microsoft.com/en-us/library/dn473006.aspx
    If it was me, I would first look into Teamviewer to see if it will do what you need. It does work between Mac and Windows and it is free for non-commercial use. http://www.teamviewer.com/en/index.aspx

  • I accidentally set a remote mac to "remote management" while screen sharing. Can I remotely reset it to screen sharing?

    I accidentally set a remote mac to "remote management" while screen sharing. I did not realize that this set it to require the commercial Apple Remote Desktop application to get to it. Can I remotely reset it to screen sharing? It has disconnected me from accessing it using iCloud.

    Good question, and I am not sure. I believe the remote login WAS checked, so if that is needed, I think that is a available, unless checking Remote Management unchecked Login.
    I am not computer illiterate, but I am not a professional IT guy. I read about more subjects than I know. Back to My Mac should still be set up in iCloud and I have seen some discussion of using ssh with that, and I am gathering that you are talking about ssh when you talk of remote shell access?
    Thanks.

  • How to set xr2 remote to "volume lock to TV input"?

    Prior to having X1 system, the old "silver with red ok button" remote could be programmed with : VOLUME LOCK
    Once you program your remote control       
    for your TV, the volume buttons will control
    the volume on your TV, regardless of which
    mode the remote is in (AUX, TV, or Cable).  
    To set your remote to control the volume      
    of another device, follow the steps below. The above is straight from the "silver with red ok button" remote manual pdf.This was useful because many HT receivers and HDTV pairings over HDMI have ARC (audio return channel).  When that is enabled, as you change TV volume your tv volume indicator will show up on the tv screen so you know what it's doing -- but the TV is actually sending the commands the HT receiver that's sitting in a cabinet where you can't see it (nor can you see the readout on the HT receiver display from 30ft away).  Now that I have the X1 system and XR2 remote, I can't find an option to lock the volume to the TV when I've paired it with an audio system.  Is there a hidden way to lock the volume buttons to the TV?  This isn't a deal breaker - but is very, very nice to have.

    The X1 remotes will "pair" the volume control to either the TV or AVR both not both at the same time. It is one or the the other.
    Be careful with X1 boxes and ARC. X1 boxes have very questionable HDMI support and ARC has been questionable. I would avoid using ARC with X1 boxes.
    Why don't you stop at a Comcast store and pick up an XR5 or XR11 remote? They are much better than the ZR2 and Comcast locations give them away for free.
    nalawod wrote:
    Prior to having X1 system, the old "silver with red ok button" remote could be programmed with : VOLUME LOCK
    Once you program your remote control       
    for your TV, the volume buttons will control
    the volume on your TV, regardless of which
    mode the remote is in (AUX, TV, or Cable).  
    To set your remote to control the volume      
    of another device, follow the steps below. The above is straight from the "silver with red ok button" remote manual pdf.This was useful because many HT receivers and HDTV pairings over HDMI have ARC (audio return channel).  When that is enabled, as you change TV volume your tv volume indicator will show up on the tv screen so you know what it's doing -- but the TV is actually sending the commands the HT receiver that's sitting in a cabinet where you can't see it (nor can you see the readout on the HT receiver display from 30ft away).  Now that I have the X1 system and XR2 remote, I can't find an option to lock the volume to the TV when I've paired it with an audio system.  Is there a hidden way to lock the volume buttons to the TV?  This isn't a deal breaker - but is very, very nice to have.
     

  • Set a remote css not included it in head

    Set a remote css not included it in <head>
    Hi everyone
    Can I set up a css for all page of the website, without include it in <head> ?
    I have this pages structure
    <html>
    <head>
    <?php include $_SERVER['DOCUMENT_ROOT'] . '/head.php' ?>
    </head>
    <body></body></html>
    So, the css link:
    (<link type="text/css" href="style.css" rel="stylesheet" />)
    is included into the script /head.php.
    I don't need php interpretation live, the only thing that I need is to set a css for all pages without include it in <head>. In fact, I work to single pages like an editor (paste and copy from word document, insert image, set title and meta description ecc.) and for that I need that the styles are applied to pages.
    Thanks to all and thanks to google translate!

    Put your link to site wide external CSS file inside the  head.php include file.
    Nancy O.

  • I need step by step instructions to set up Remote Desktop between 2 computers on 2 different networks. Please dumb it down for me.

    I need step by step instructions to set up Remote Desktop between 2 computers on 2 different networks. Please dumb it down for me.

    I need to do the same, but with more than one computer behind a dynamic-IP NAT:
    OS X Server A -|
                   |
    OS X Client 1  |- NAT Router Fixed IP ---|
                   |                         |
    OS X Client 2 -|                         |
                                             |
    OS X Client 3 -|                         |
                   |- NAT Router Dynamic IP -| Internet
    OS X Client 4 -|                         |
                                             |
    OS X Client 5 -|                         |
                   |- NAT Router Dynamic IP -|
    OS X Client 6 -|
    I have ARD installed on Client 1 and Client 3 (different locations where I'm at) and I need to manage Client 5 and 6 (and the others, but that amounts to the same problem). Since there are multiple computers behind the NAT, I cannot just patch a port through. I want a secure solution as the traffic goes via the internet.
    I have been thinking about letting the users of Client 5 and 6 set up a VPN link to the NAT Router of Client 1 when they need assistance, but when I want to manage this from Client 3, all traffic goes over two VPNs, let alone if the router at Client 1 can manage this in a stable way.
    Probably, two assignments in the router of client 5 & 6 would be nice, but can I tell ARD to use different ports for certain machines?

  • Setting up remote network connection with wrt1900ac nubby question

    Hi everyone, I am looking to set up remote network connection = been able to be on my network from public place. I have never done it before and i just purchased wrt1900ac and i was wondering if someone can point me to a step by step guidance how to do so. I also obtain static IP address from my internet provider. thank you in advance. I will be connecting with notebook with windows 7 on it

    Typically to access LAN devices directly on a remote network you would VPN into the remote network. Either using Port Forwarding and a VPN Server or using a VPN feature built into the router.
    This is assuming you don't plan to use something like Logmein or Gotomypc.
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • Setting up remote access for support

    Need to set up remote support for my Dad's iMac. He has an airport express connected to an optonline cable modem. I have an airport connected to a charter cable modem.
    Both systems are running Mavericks. I have the latest remote access app.
    I tried this a year ago and could connect to him when I was on his local network but not when I was at home. Since then everything has been updated. I will be visiting him in a few week and could do any set up on his system.
    I read the admin guide but it's still to confusing to me. I am able to set up and connect to computers on my local network ok.
    Will ARA be able to do this? Do I need any further software? logmeon, etc?
    Any tips on creating a client installer to use when I am there? I will be using his user account.
    Do any changes need to be made to the routers to get through them?
    Could use some help here. Thanks

    https://discussions.apple.com/thread/5294202?tstart=0
    Something you should be aware of is the frequency of IP address change at your father's location. Providers of residential broadband services lease an IP address for a certain duration which you have no control over and is purely arbitrary. You may be familiar with these changes?
    The point is sometimes these addresses change regularly (4 hours to every few days) and sometimes they stay the same for a longer period of time such as a year or more.
    Because of the nature of this change you may find you can remote assist your father one day but not the next. The situation is easily rectified with a simple phonecall to your father. He can tell you what IP address he's using by launching his browser and clicking this link:
    http://myipaddress.com
    He gives you his new IP address and you should be able to make a successful connection again.
    Be aware IP addresses handed out by ISPs are known as routable. IP addresses handed out by Firewalls/Routers/Gateway devices such as Apple's Airport Express Base Station etc are not routable. Assuming you've not changed anything in the devices they will always be one of these three ranges: 192.168.1.x; 10.x.x.x and 172.16.16.x. You don't use any of these last three group of addresses to make the connection over the public external (internet) network but you do use them when on the same private internal network.

  • Setting up remote printing Epson 1400

    Hi, I've just bought an Epson 1400 printer and I'm having trouble setting up remote printing using my AirPort Extreme.
    I've opened AirPort Utility but it's saying it's unable to find any AirPort base stations and can't select any other options but rescan. My internet is still working and I can communicate with my laptop okay. Not sure what else to do... can anyone help?
    Thanks
    Nikki

    I've reset the AEBS and it's working fine. It was seeing my printer until I disconnected the USB cable from the AEBS to the printer. The printer is know showing up as off-line.
    Any suggestions on what to do next?

  • Creative Zen Vision 30GB - How to set IR Remote ON with Navigation keys not working in the play

    I have Creative Zen Vision 30GB player. Within a month of buying, its navigation keys stopped working. I took it to the customer service of store where I bought it and they fixed it (their solution was to make firmware update, even though I do not understand how come that can fix this issue). Anyways after another 5 months of not so often use, the same problem returned (key pad stopped working and without it this player is useless). I sent it to Creative and they returned it saying that as it has few scratches on the edges, they believe it has been hit. I never dropped the player and these are normal scratches at the end if you do not use any skin (which I could never find for this player). Btw from my other friend's experiences, Creative always does like this, never considered warranty (so beware!). Anyways now the problem is that I have IR remote for Zen vision but it can not work till IR Remote setting in System->Player Settings is switched ON. And this can not be done as the navigation keys are not working. So please please suggest me some other way if anybody of you know to enable this setting through software. Otherwise this costly player is just a 30GB harddisk for me

    Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

  • Set up remote users in Win 2012 R2 remote server so employees can access their desktop remotely

    Hi  we want to get rid of  PC/desktops in house. We are a 10 employee firm.  We want all of them access the server remotely from their own laptop etc.,   They mostly use MS Office and adobe reader etc., very light work.  How can
    we set up a virtual desktop for each of the users in the Server. I heard about Remote Desktop Services but not sure how this would work. 
    we are planning to get a one managed dedicated server from some hosting provider with decent config (say Xeon Server with 8 GB or more RAM with SATA or SAS drives.  If you have any suggestions please feel free to comment on whom to buy. Azure wouldn't
    work as we cannot install MS Office App on the remote desktop services VM!). 
    Do I need a separate server for AD? 
    Does Win SRV 2012 have option to create remote desktop for users that can log in remotely?. I understand we need RDS CAL no problem, 
    How can we allow users to store data - what's a best option.. We can attach a SAS/SATA drive that users can map to is one idea.  
    We plan on getting Office 365 E3 plan that comes with Office Pro Plus. We understand that we need volume license for office to be installed on remote server.   We will be migrating email and sharepoint to O365. 
    Appreciate if some one could advise how this would work.  Also from backup point of view, what options that we need to consider. 
    thank you

    Hi,
    If all the users only need to use same applications, you can make the server as the Remote Desktop Session host server (RDSH), install the RD licensing role and install proper
    RDS CALs.
    If it is a Windows Server 2012, you can refer to
    Deploying the RDS Quick Start deployment type in Windows Server 2012 (for Session Virtualization)
    http://social.technet.microsoft.com/wiki/contents/articles/10421.deploying-the-rds-quick-start-deployment-type-in-windows-server-2012-for-session-virtualization.aspx
    AD is not the requirement for you.
    In addition, if you also would like to access the server from Internet, you may need to do one of the following:
    1. Purchase a static public IP address and connect the server to the Internet directly.
    2. Purchase a domain name and bind the IP address of the server to it.
    3. If the server do not connect to Internet directly, you need to configure port forwarding on your router to forward TCP/DUP 3389.
    4. Setup the VPN or RD gateway server.
    Allow Remote Desktop connections from outside your home network
    http://windows.microsoft.com/en-us/windows7/allow-remote-desktop-connections-from-outside-your-home-network
    More information:
    Remote Desktop Services Overview
    http://technet.microsoft.com/en-us/library/hh831447.aspx
    Installing Remote Desktop Session Host Step-by-Step Guide
    http://technet.microsoft.com/en-us/library/dd883275(v=ws.10).aspx
    Remote Desktop Services: Getting Started
    http://technet.microsoft.com/en-us/library/dd736539(v=ws.10).aspx
    Deploying Remote Desktop Licensing Step-by-Step Guide
    http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

Maybe you are looking for