Setup cartridge error

I bought a new officejet pro 8600 plus and it was damaged when i mopened the box and started setting it up.
I promptly took the printer back to place of purchase but forgot to give them the setup cartridges for theat printer so they removed the cartridges from the 2nd printer.
I came back home and started again the setup process and used the cartridges from the damaged printer and now the printer will not setup, it has the 'use original setup cartridges' error
The place of purchase is now closed and i need my printer onl;ine ASAP
How do i override this error
Thanks
This question was solved.
View Solution.

This is UNACCEPTABLE!  I support a user base with over 100 HP Officejet 4620 printers.  I sent one user a ink cartridge pack from a dmaged printer and the printer REFUSES to use the valid cartridges?!?!  This is CRIMINAL.  It's a simple tank of ink and locks to a SPECIFIC printer's hardware?!?!?  This is going to the BBB tonight.
And this thread as absolutely NOT solved.  The orignal question from the OP has not been addressed.

Similar Messages

  • Deskjet 3070a use setup cartridges error

    Hi I am having th same error message asking me to use the setup cartridges, i have no idea why I have changed the cartridges several times and to my knowlidge the power has not been removed from the printer, I have managed to find three of the original setup cartridges but not he black as no doubt that has been changed most often and was disposed of.
    this seems to be a very poor system, it looks as if I shall have to buy another printer which is a shame as this one has worked faultlessly for some time now, it is well out of warenty. Please help sombody,
    regards Mike

    Hi @Mikepaget, 
    I understand that you are getting the message to "use the setup cartridges". You have already had several cartridges installed, so the setup cartridges wouldn't be required. I can help you.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    I have provided a document with some steps to try.
    'Incompatible Ink Cartridge' or 'Indicated Ink Cartridge Must Be Replaced' Message Displays on the C...
    Please call our technical support if the issue persists for other available option. Call 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    Contact HP.
    Have a nice weekend!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Deskjet 3520 e-All-in-O​ne - SETUP Cartridges cannot be used

    I purchased a refurbished Deskjet 3520 today from a local electronics store that came with SETUP Cartridges in the box.  I turned on the printer, installed the cartridges, and received the following error message:
    ! Do not use SETUP
    SETUP cartridges cannot be used after the device has been initialized.  Remove and install non-SETUP cartridges.
    Is there a way for me to do a factory restore / reset so that I can get these cartridges to work?  The cartridges themselves have not been used before.  Just trying to save money and use the cartridges that came with the device.  Any help would be appreciated.

    Hello busackzl,
    Welcome to the HP Forums! I understand your concerns with your Deskjet 3520. Please try these steps:
    1) Make sure this printer is plugged into a direct wall, not a surge protector
    2) Take out the ink cartridges, close the cartridge door
    3) Unplug the power cord from the back of the printer (Do not press the power button)
    4) Wait 60 seconds or more
    5) Plug the power cord back into the printer, wait for the printer to turn on completely
    6) Now, install the ink cartridges
    If you are still receiving the same message, then please contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
    Good Luck.
    I worked on behalf of HP.

  • "Do Not use setup Cartridges" message when setting up Officejet Pro 8600

    Just trying to set up a new Officejet Pro 8600 and installed the catridges that were in the box but I just get a message on th ediplay that says  "Do not use setup cartridges - Y" and I can't get any further. I've taken them all out and put them back in to no avail.
    Can't find any referenct to this error message on HP or google...HELP!!!
    This question was solved.
    View Solution.

    Hi GraGra,
    Thank you for the update. Glad to hear the issue has been resolved. Have a wonderful day.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Officejet Pro 8600 print cartridge error

    one or more cartridges appear to be damaged K.  Message appeared after replacing the exhausted original black setup cartridge.  I replaced the replacement cartridge with a new cartridge to no avail.  I cleaned the contacts and even replaced all the original setup cartridges, again to no avail.  This is a wireless network printer and the PC uses a windows  7 home premium OS.  This appears to a printer problem not connected to the PC or OS.  This is the 2nd HP printer i have that has the same problem.  Any suggestions except replacing the printer?
    This question was solved.
    View Solution.

    @ REBjr.  - I understand that you are getting error message on the printer that is related to the print cartridges.  Are you using genuine HP non refilled ink in the printer? I would  start by doing a  hard reset to the product in an attempt to restore the printer to a known working condition and try to clear the error message prior to replacing any parts.  Here is a document that will provide the steps to the hard reset.  Also, is there residue on the black cartridge?  If so, I would look at this link here. It addresses getting an ink cartridge error message on the printer when trying to install a new black cartridge in the machine. I hope that this helps.
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • No setup cartridge

    I was given an Officejet 6600 without the setup catridges, now I'm stuck on the install with an error msg that says to use Setup cartridges.  Is there anyway around this step?  Thanks.

    Hello Franka25,  You may have to call HP Technical Support to obtain the SETUP cartridges as they are not available outside HP. Please call HP Tech Support for further assistance.
    If you are in US , the toll free # is 1-800-474-6836 .
    If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.   

  • No setup cartridges for HP 5514

    Can the error message Use Setup Cartridges be bypassed if I don't have them? I got this printer from my mom but don't have the setup cartridges and spent money on new cartridges. I can't even get through installation because its stuck on the error screen!

    Hi, you'll need to contact HP Phone Support about this - let them know you no longer have the SETUPs.
    Phone no.s
    http://welcome.hp.com/country/us/en/wwcontact_us.html
    Can you let us know how you get on?
    Thanks, Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • HP Deskjet 1510 Tri-color Ink Cartridge Error

    I just bought a HP Deskjet 1510 back in August and I loaded the HP original ink cartridges that come with the purchase. For the first 5 print jobs it was working well, but somehow after a while my laptop and the printer itself just kept warning that there's low ink level in the cartridges (especially the tri-color one). I haven't even got to use the tri-color cartridge much as I've been printing in grayscale ever since I've used this printer. 
    I've tried taking the cartridge out and putting it back in again; sometimes it works, sometimes it doesn't. I thought it might be a contact issue so I cleaned those parts too but it didn't change anything.
    It's getting extremely frustrating as I'll have to do this for god knows how many times for every single page I print or copy. This happens to the black cartridge too but 90% of the time it's the tri-color cartridge.
    Please help.
    Thanks.

    Hello @ut32w , and welcome to the HP Forums, I hope you enjoy your experience!
    I hope you had a great holiday!
    I understand from reading your post that you are running into cartridge errors.  I'd like to help!
    I would first suggest removing the ink cartridges, and performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend running through the steps listed in the document below:
    An 'Incompatible Ink Cartridge or 'Ink Cartridges Missing' Error Message Displays for HP Deskjet 151...
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

    Error:
    Configure Portal Setup
    An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
    Errors in the Log:
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
    Any ideas?
    David Baur

    I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
    David Baur

  • HP Officejet Pro 8600 Premium e-All-in-One - N911n cartridge errors

    Please help! I have an Officejet Pro 8600 all in one that is just over a year old, just out of warrenty... We don't use it much and so just had to change the ink cartridges for the first time. Once they were changed out, the printer gave me the warning that there is a cartridge error and that the Cyan failed. Even though it was a brand new cartridge, I bought another one and changed it again. I still get the same error message with the 2nd new one. I have been through everything on the HP website for troubleshooting this problem and nothing works! Please, does anyone have anything else I can do????

    Sorry to hear you are still having this problem. So the yellow was out and you replaced the yellow and then the cyan failed?
    Printers when left not used for some time, may have printhead issue, but if it's not even recognizing the cartridge, then more likely a hardware or board issue that may need professional service.
    One thing you can try is to update the firmweare (if not already), http://ftp.hp.com/pub/softlib/software12/COL41945/bi-101905-5/OJP8600_N911a_R1322C.exe
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • HP 7520 Printer - Need to bypass requiremen​t for SETUP cartridges

    I purchased a new HP 7520 and also a package of new ink cartridges for it.  The printer was a store demo that was on sale.  I got home with it and tried to set it up using my new cartridges and it continues to refuse to accept them stating that I need to use the SETUP cartridges which came with it.  It did not come with SETUP as it was an out of box printer purchased in the store sale.
    Have I just been screwed?  Why the hades does it "require" setup cartridges?  What does this cartridge do that new ones don't do?  And how can I bypass this for setup?  I'm not junking a $140 printer over lack of setup cartridges.  I have been an HP customer for over 20 years...can't even tell you how many HP printers and PC's I've had over the years and this is the first time I've ever run into this ludicrous issue.
    I'm not buying special SETUP cartridges.  I want a bypass for this problem.  I know there has to be one.  The printer is brand new and had not apparently ever even been setup inside the store...it was a non-operational demo.  The cartridge head is shiney and clean.  C'mon HP...get real here!  Why do you NEED setup cartridges?  I'm an old customer.  Work with me here!
    J.Gibson
    GIBSON MEDIA SERVICES

    The setup cartrdiges are required for the initial setup.  You will need to contact HP.  If you are in the US or Canada call HP at 1-800-HPINVENt, elsewhere see the document here for contact information.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How do I fix Cartridge Error and flashing light message on my 4215xi all-in-one? I use windows 8.1

    This equipment was working just fine after I installed a re-filled black ink cartridge.   A few days later I began to get a flashing light with the message: Cartridge Error. See Product Documentation for details.   Sometimes my computer said the printer was offline when it wasn't.   I have also had occasional cartridge door open messages when the door was closed.    I have removed the two cartrdges, cleaned them with water by using a coffee filter as  a swab.  I have also uninstalled and, I think, reinstalled the software printer driver, but I am not entirely certain as to that.

    Hi there @donpablitosan!
    Thank you for posting on the HP Forums!
    I would be happy to help in regards to the flashing lights and cartridge error on the printer.  You had also mentioned that the computer sometimes shows the printer offline or door open errors.  I should be able to help with that as well!
    The first thing I suggest is to plug the printer into the wall outlet directly if it is currently in a power surge protector or extension cord.  This may sound silly but this will ensure the printer is getting full power and may eliminate any unnecessary troubleshooting.  If the printer is no longer getting full power from the power surge or extension cord it may give false errors or have poor connection and paper feed issues.
    From what I can find it looks like you have done all the troubleshooting regarding the cartridge itself.  If you have tried the above suggestion and are still getting the same issue then you may need to try another cartridge to see if the issue is coming from the printers hardware or the cartridge.  
    Thanks again for posting on the HP Forums! 
    Please post back and let me know how it goes and enjoy your day!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • Setup Initialization Error

    Mar 14, 2010 Setup Initialization Error My computer recently crashed. I got it repaired but in the process, most of my programs were lost including Adobe PhotoShop 7.0. I tried re-installing from the CD but got an error message which read: Setup Initialization Error. Setup is unable to find a hard disk location to store temporary files. Make at least 3089KB free space available and then running setup again. Error 101. Then I received another message: "Could not complete your request because of missing or invalid personalization information." Can anyone help fix this situation? Thank you. Kind personal regards,

    And? What operating system? What language? What computer? User account? Sorry, such vague statemts will never get you the help you may need. This is mostly a system problem...
    Mylenium

  • How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?

    Dear all
    How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
    Thanks
    Regards
    karan

    Hello
    These are the following errors
    1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
    2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
    3.
    <Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>  
    <Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>  
    <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />  
    <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
    Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
    tThere are repeating errors also.
    TThanks
    Regards
    kkaran

  • HP 5510 all in one reads "print cartridge error"

    Printer will not reset after I installed  new HP black cartridge.  I cleaned cartidges and printer heads as per HP instructions, 
    but same error message remains.  Is there a way to reset the printer?

    Hello @mainelym , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are running into cartridge errors.  I would like to help.
    I would recommend removing the ink cartridges, and performing a power reset on the printer.Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then suggest this document on A 'Used or Counterfeit Cartridge Detected' or 'Counterfeit Cartridge Advisory' Message Displays on t...
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

Maybe you are looking for