Shall I use NRSE or RSE mode for reading the output voltage of my sensor?
Hello,
I am using a gaz sensor that needs a power supply of 24 V and has an output voltage : 0 -> 10 V. I want to read this voltage with labview( and then convert it to PPMs ).
My problem : I don't know what kind of analog input connection I must use : RSE ou NRSE ? ( I suppose the DIFF mode isn't appriopriate here ) .
I think I should use the NRSE mode ( meaning connecting the V+ of the 0-10V signal to one of the ACH and the V- to AISENSE ) ???
Any help would be really great,
Regards,
David
PS : using Labview 7.1
Hi David,
It basically all boils down to if the signal source is grounded or floating? If grounded use DIFF for low voltages (0-2V) and NRSE for high (above 2V). If the signal is floating use RSE.
For more documentation see:
http://digital.ni.com/public.nsf/websearch/D509679FFAE2764386256297005D0C9D
http://zone.ni.com/devzone/conceptd.nsf/webmain/177A8B29FEDC0F5886256FA90083C0F8
Regards
Meister, NIDK
Similar Messages
-
How to use TDSCRNPOS in ITCPO structure for positioning the output screen?
Hi Guys,
I am having a requirement to display the form as pop up window.
I think for that I have to use TDSCRNPOS from ITCPO structure.
But I don't know how to use this option.
<b>I need to display the print preview as pop up window</b>Hi,
Please check out the below link.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60b33a28-dca2-2d10-f3b2-d2096b460b1e&overridelayout=true
Hope it suffice your requirement.
Regards,
AL -
HT5878 how to check the detail of font being used for reading the file received by an email
I received word file as an attachment with email on my iphone. I want to check the detail on font being used for reading the word file received as attachment in an email.
ThanksYou don't need to copy the cert out of your configuration. OpenSSL has an "s_client" subcommand which can open an SSL connection and verify the cert for you. It even knows how to do STARTTLS. Something like this ought to do it:
openssl s_client -starttls smtp -CAfile /path/to/ca/file -connect your.ironport:25
The /path/to/ca/file is necessary to provide openssl with a cache of root CA certs. You could use -CApath instead of -CAfile if you have a hashed directory of root CA certs instead of a single file containing them all.
You can also point this at your partner's SMTP server as well. -
We collected data using NI in the Labview environment and created tdms document. Is there a reader for reading the data in Matlab environment?
A search will often turn up results.
Reading TDM/TDMS Files with The MathWorks, Inc. MATLAB® Software -
I know nothing about how to use my new ipod and when reading the little information that came with it, all I can do is turn it on. Then in a few seconds it goes black, never having brought up a screen to do anything! Help! What do I do to get this thing going?
You might consider connecting it to the charger and charging up the battery overnight.
Please Get the iPod Touch User Manual for iOS 5 -
Print program for the smartform for selecting the output type (email/fax)
Hi All,
Requirement :I have to create a print program for the smartform where the output type may be print out,email or fax ,so i need to put the condition for selecting the output type (like printout,email,fax).
can any body please let me know how to put the condition for selecting the desired output type ?
Thanks in advance
RahulHi
It is not the output type that has to be changed
it is the MEDIUM which you have to change and configure
for printout medium is 1
for FAX medium is 2
for MAIL it is 7.
so instead of printout change the medium to 2 or 7 for the same output type and attach to the same driver program and smartform/form.
Reward points for useful Answers
Regards
Anji -
EXIT/BADI for enhancing the output of the transaction S_ALR_87013532
Hi,
greetings to all!! I have a problem here guys-I need to find any exit or badi for enhancing the output of the tcode S_ALR_87013532.This tcode is used for seeing the planned/actual/variance of project cost.
In the output we have got 3 columns-total of years, previous years and 2009. Under each column we have Plan, Actual, Variance and VAR %. Our requirement is to show Functional Location(PRPS-TPLNR), Budget Number(TCN01-SWRT0), SBU (TCN01-SWRT1) and Region (TCN01-SWRT2) in each of the clolumns-you can also get the last 3 fields in PRPS table as USR00, USR01 and USR02.
Can anyone help please?could not find anything worthwhile on SDN. Thnx a lot !Hi,
Check these User-Exits..
Exit name Short text
KAHFEX01 Selection data for commercial reporting in PS
KAP10001 PS: Hierarchy Reports for Projects
KAP60001 PS: Export Project Key Figures into R/3 EIS
Also check the BADI
WBS_USER_FIELDS_F4
Regards
Raghu
Edited by: Raghavendra Rao G on Sep 2, 2009 12:26 PM -
RSE, NRSE, or DIFF mode for my application?
Hello,
I am using a pressure sensor that needs 5V supply and generates a 0->2.5V output. I would like to read this voltage using Labview. However I am not sure which mode( diff, RSE, or NRSE) I should use here. I have attached a very simple photo of the way to connecte the sensor ( delivered with the sensor). There is : 1 supply connexion
1 Ground connexion
1 AGround connexion
1 Vout connexion
I have already tried :
RSE mode : connecting to ACH and AIGND. I see a 1 to 2mV offset ( compared to a LEM). But I thought this wasn't appropriate in my situation?
NRSE mode : connecting ACH and AISense. Offset <1.5mV
( I haven't tried with any resistance )
Since the way of connecting this sensor is very common ( I will probably use this way of connecting again), could anybody tell me what the correct mode is? I have already read answers on the forum and the NI application note about how to use those different modes, but I haven't been able to conclude....
Any kind of help would be great!
Thanks,
Toto
Attachments:
Connecting the sensor.doc 68 KBBonjour,
Le problème d'offset peut-être lié à plusieurs paramètres qu'il faut chercher à isoler.
Quelle est la différence entre le GND et le AGND sur votre capteur? Comment alimentez-vous ce capteur, via le +5V de la carte d'acquisition? Comment calculez-vous cet offset? Avez-vous essayé de connecter des résistances de biais sur les entrées de la carte?
La note d'application suivante récapitule bier les différents modes de connectique.
Cordialement,
DD
http://zone.ni.com/devzone/conceptd.nsf/webmain/177A8B29FEDC0F5886256FA90083C0F8 -
Using Firefox 3.6.13 for Mac (OS X 10.4.11)
Did you place the new bookmarks in the Bookmarks Toolbar folder?
* https://support.mozilla.com/kb/how-do-i-use-bookmarks
If new bookmarks do not show then a possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
Anyone using M-Audio FireWire Solo for iChat audio output?
Audio output for iChat works perfectly through my G5 internal speaker but does not work through my FireWire Solo. It yields 100% digital distortion everytime the person on the other end speaks. Everything else in my setup works beautifully with my M-Audio device (Logic, Pro Tools, Reason, iTunes and all other applications).
You have landed in iSight Discussions. You may find better help in the Expanding your Power Mac G5 Discussions or iChat AV 3 Discussions area.
I do not use M-Audio or any of the other things you post about except iChat AV, and iChat AV does NOT work through my DP G5's internal speaker.
I offer the following possibilities for your consideration if you cannot find better help:
(0) When using iSight or iChat AV, you may be experiencing Possible hardware or software conflicts. This link gives tips for investigating that possibility.
(1) You may be trying to use M-Audio FireWire Solo for other than its intended purpose. The web site states, in part: The FireWire Solo is designed from the ground up as an easy-to-use, high-quality interface for songwriters to record guitars, vocals and more on the computer.Perhaps your M-Audio's documentation or the "Support" information linked on the web site can help you determine whether your device is compatible with iChat AV and your other AV equipment. -
How Can I configure the 6024E board for reading the voltage from a source?
Hi, I have a little problem, I want to use the 6024E board for reading voltage from a source and then display this on the monitor, and also I want to change the voltage from the output using the computer. I read the manual but I don't understand how to connect and configure the board. It is to proof that the board receive and send information.
Thanks, sorry for my english, I'm from Mexico, if you don't understand something about my explanation tell me.Thank you, now I'm trying to do my project and I have another question, there are differents ways to connect the source and I choose the NRSE configuration because I'm going to use a grounded signal source... well in the manual says "The signal is then connected to the positive input of the PGIA, and the signal local ground reference is conenected to the negative input ot the PGIA. The ground point of the signal should, therefore, be connected to the AISENSE pin." I don't understand this because I only have two wires and here is talking about three connections, please help me, how do I connect the source to the board? I have the positive wire and the negative wire.... maybe is because I don't have a perfect english and I don't understand the sentence...
-
Using IE3.5, users can't read the user account/password page
We are currently using IE3 to access Netscape mail. Before the upgrade
from 2.0 to 3.5, users on IE3 could go access their user account page and change
password information. After the upgrade to version 3.5, all clients using
IE3 are unable to read the information now.
<P>
Is there a workaround solution?
<P>
Use IE4.xx or Netscape Communicator 4.xx. Make sure Javascript is enabled in
the Advanced Preferences section.check these will be helpful BI Dashboard - access denied for user to path /users/administrator/_portal/
http://obiee-blog.info/administration-tool/error-access-denied-for-user-to-path/
Cheers,
KK -
i am using a photodetector (TSL-250) to detect the different intensity of the laser beam, since the laser beam is passing throught a different depthness of liquid dye. I am measuring the output in voltage form. is there any measurement studio - Visual basic example illustrate this kind of measurement? thanks
Sounds like this is a simple continuous analog input application. Here are some starting points for example code based on which environment you have. Note: the PCI-6014 is supported by both NI-DAQmx (7.1 only) and Traditional NI-DAQ (7.1 and earlier).
Programming DAQ in Visual Basic 6.0
http://digital.ni.com/public.nsf/websearch/341C14328D91EDF186256D9800456FC0?OpenDocument
Programming DAQ in Visual Basic .NET
http://digital.ni.com/public.nsf/websearch/AFFC0BE95DE6B38186256D9B0051342B?OpenDocument
Have a great day! -
I judge my judgments, was written on Word office 2007 on the system used to windos7 and Apple cant Read my judgments on the 2012 Wordoffice of Apple
Try these 3 possible solutions:
1. Restart iPad
Hold down the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, hold down the Sleep/Wake until the Apple logo appears.
2. Close inactive Apps
Double-click the Home button; hold Apps down (in the Task Bar) for a second or two until you see the minus sign. Tap and close all inactive Apps.
3. Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Ignore the red slider. -
User exist for controlling the OutPut type in sales order
Hi
Is their any exist which controls the output type based on header data of the order? VA01/02.
Best regards
Satish Kumar KHi,
IN the VOFM routine you can use the structure KOMKBV1 which will be populated with the sales org (VKORG), division (SPART) and order type (AUART).
Example
SY-SUBRC = 4.
IF KOMKBV1-VKORG = '0001' AND
KOMKBV1-SPART = '12' AND
KOMKBV1-AUART = 'ZXXX'.
SET THE return code to 0 to propose the output type.
SY-SUBRC = 0.
ENDIF.
Hope this helps..
Thanks,
Naren
Maybe you are looking for
-
Conversion of hexadecimal file to decimal file in labview
hi all, I took a measurement from an anemometer by its original program. I attached the file below. I want to convert this file to the decimal file. I all know is the data in file are in hexadecimal and 16-byte. How can I convert this file to decimal
-
How can I get my computer to recognize the canon eos digital rebel
I have not used this camera for more than 2 years. I now have a laptop with windows 7. This computer will not recognize this camera when I plug it in to usb to download pictures. I have tried everything except what is going to work.
-
What do I do to stop the ASL.dll wasn't found to able to start ITunes?
I get this message: Unable to locate component. Application has failed to start because ASL.dll wasn't found. How do I correct this?
-
Hello, I have a question related to clearing the cache in a two level tab application structure. If you look at the examples application of Denes Kubicek, you see that he uses a two level tab structure. The horizontal bar below the header is level 1
-
Apply OR clause in dynamic filter on an interactive report
Apex ver - 4.2 I have a requirement wherein I have to apply filter on interactive report. I have to apply filter which will change depending upon different conditions. So I created a PLSQL process on "On Load Before Region" For e.g if condition is --