Ship to party not assigned to sold to party

Hi friends,
can u expain me ---
In the partner function screen of a sold-to party
master record for
the current sales area, enter the ship-to party under
the function
'ship-to party' ein.
means what extactly to do?
regards,
mahesh amale

Hi,
Let's take a simple example and try to understand.
Say Company "A" is purchasing goods from you. In that case For you, Sold to Party is company "A".
Let's say company "A" is asking you to ship goods to its branch in USA (Called company "B"). In that case company "B" becomes a Ship to Party of company "A"
Same manner company "A" can ask you to ship goods to it's different places/ branches. (Say company "C" and "D") Those also become different Ship to Parties of company "A"
Now in the customer master data (In transaction XD01) you have a option of specifying all ship to parties relevant to a Sold to Party.
So what you can do is, go to XD02, select your sold to party, (Which is company "A) and go to its partner functions tab.
Maintain "B", "C", "D" as different ship to parties for "A" under partner functions "SH"
same manner you can do it for bill to party and payer as well.
Now if you go to sales order creation (VA01) and put company "A" as sold to party and press Enter key, you'll get a pop up asking you to select relevant ship to party for this sales order out of (B, C, D). That will be for the sales order header level.
Same manner you can select your ship to party as sales order line item as well. (Can keep different ship to parties for each line item)
Since delivery is for a sales order line item, relevant ship to party will get copied from the line item.
Hope this is clear to you now!
Best regards,
Anupa

Similar Messages

  • Find Ship-to's not assigned to Sold-to's

    I need to figure out all ship-to that have not been assigned to any sold-to, is there an easy way to do this? Also, is there any configuration or enhancement that would make it mandatory to assign ship-to to a sold-to at a sales order level.
    Thanks in advance for your help.

    Hi,
    Using KNVP table we can get the list of partners based on the parner function(SH) with respect to sales organization.
    use the following menupath
    SE11 --> give the table as KNVP, press F7 then ShiftCtrlF10 it takes you to the screen where you can give inputs, like sales org and partner function which you require.
    Before executing ensure that maximum no.hits field is blank.
    Now you can get the list of Ship-to-party's existing.
    if you select the mandatory option of the SP and SH functions as mandatory for customer master, it takes sold to number as even ship to, if you want to give some other number as ship to , you can give that manually in the customer master(Unlimited).
    Then you can select any Ship to  existing in CMR in the sales order.
    Hope this information clarifies all.
    Let me know if you need any thing more on this.
    Regards,
    Ravi Duggirala

  • Error Message while ship to party is not assigned to sold to party in VA01

    Hi All,
    In VA01, i need to throw an error message while giving a ship to party, which is not assigned to sold to party.
    I tried in  EXIT_SAPLV09A_001
                  EXIT_SAPLV09A_002
                  EXIT_SAPLV09A_003
                  EXIT_SAPLV09A_004
    above user exits, but i couldnt find the solution.
    if possible provide with the code.
    i appericiate the early response.
    Regards,
    Kumar.

    User exit MV45AFZB, form-routine USEREXIT_CHECK_VBAK.

  • Ship to party not assigned to sold to party still can i create a sale order

    Hi ,
    For example i have a ship to Party B who is not assigned to Sold to Party A . System is allowing me to create a sale order for the above mentioned "Sold to" and "ship to"  combination. What is the logic behind this ? is it a provided functionality or a bug?

    hi,
    for example if you are using account group 0001, when you create a customer it has the ability of picking up a SH, BP and PY along with SP. this is the underlying config at account group. Now for SP 100 the ship party can 100 or 200 ... or you can modify at the order level. Its not necessary that 200 has been identified at the customer master creation level itself. But partner function SH shoudl be availble in the account group with which the customer is created.
    regards
    sadhu kishore

  • Sales Order creation with Ship to not assigned to Sold to

    Hi There,
    I have an issue that I am able to create an order with a Ship to which is not assigned to Sold to. i.e, The sold to accepts any ship to and not giving any error. I am giving both Sold to and Ship to together while order creation. Is it because of this? Should I enter sold to and then press enter for the list of Ship to's assigned to that? I dont find any issues in the Partner determination.
    Can you help?
    Thanks in advance,
    Renjith

    Hi Renjith,
    I agree with you that SAP allows you to enter any ship to(belonging to sales org of sold-to party) for a given sold to party.
    To meet your requirement, You may like to use the Userexit MV45AFZZ (Form USEREXIT_SAVE_DOCUMENT_PREPARE) to check the Ship-to while saving. Thus a comparison could be made with assigned Ship-Tos for the  given Sold-to party. In case there is a mismatch throw a error message before allowing committing of save.
    Your developer would be able to help you to achieve this
    Please let me know if this helps
    Warm regards
    Harpreet

  • Ship-To not assigned to Sold-To, even though able to create an order

    Hi,
    We have a peculiar scenario.
    We have a Sold-To Ex: 1100, ship to 1200 and 1300 for a sales area, ex 1000-10-10. Here only 1200 Ship-to is assigned to Sold to 1100. ( SH 1300 is not assigned to SP 1100).
    I am able to create an order for 1100 and 1200 for the above sales area, it is fine with the system.
    But system is allowing me to create and order for 1100 and 1300 toooo. As per my knowledge system should not accept this order and system should give us a message like this "ship to is not maintained for this sold to" or some thing like that.
    This is happening in ECC6.0. As i already checked with the system there is no enhancement or user exits used. Is it standard behavior of ECC6.0 or is there any solution for this problem.
    Any help help form any one so much help full.
    Thanks
    Venkat Cheedalla.

    Hi Venkatesh,
    You can do this in Customer Master of Sold-to party: 1100. In master, go to Sales Area Data Tab --> Partners Tabstrip. There you will find a Ship-to-Party Customer Code. Here change the 1100 code to 1200. Then Save.
    Now while creation of Sale Order, system will automatically give you the Ship-to party as 1200. And if you want to change that Ship-to Party, then system will give you an Information message that Ship-to needs to be redetermined.
    If you want that this Information Message should come as Error Message, then I think some customizations needs to be done in SPRO.
    Regards,
    Vishal

  • Multiple ship to party issue.

    Hi Experts,
    I have multiple ship-to, bill-to, payer for one sold to party. I maintain the same in customer master for sold to party. I create a contract for sold to party with default ship to party.
    In creating sales order with reference to contract, the system is letting me assign any ship-to party and other partner functions to the document even though they are not assigned to sold to party in customer master.
    If there any option by which I can restrict the partner functions option only to the partners assigned in customer master of sold to party.
    If some one has the solution please provide me it ASAP.
    Thanks
    Chakrapani

    Hi Chakrapani
    Please check your Partner determination procedure configuration.Also check how the ship to party partner function is assigned
    to the account groups.
    Regards
    Srinath

  • Ship-to party is not assigned to a sold-to party

    Dear Experts
    I am creating Sales ORder VA01
    my customer is 42
    so i have enterd 42 in Ship to party and Sold to party
    but getting error is
    Ship-to party 42 is not assigned to a sold-to party
    could u please guide me
    Regards
    Amol

    Hi,
    Goto the T.Code "XD03".
    Enter the customer number as "42".
    Maintain the company code and sales area.Enter.
    Goto the sales area tab.Click on "Partner functions" tab.
    Check whether the ship-to-party is 42 or not.I think it is not 42,so that only,you are getting this error message.
    In sales order,enter the sold-to-party as "42".The ship-to-party will be auto determined from the customer master.After this you can change it to 42 if the following setting is maintained for your partner determination procedure.
    Goto the path:
    SPRO>Sales and Distribution>Basic Functions>Partner Determination>Set Up Partner Determination-->Set Up Partner Determination for Sales Document Header.
    Click on "Partner Determination Procedure Assignment".Identify the procedure assigned to your document type.
    Click on "Partner Determination Procedures".Select that procedure.
    Double click on "Partner Functions in Procedure".
    Ensure that for "SH" partner function,the field "Not modifiable" is not ticked.
    Save.
    Regards,
    Krishna.

  • Ship to party,Bill to party, payer, sold to party not shown in partners Tab

    Hi,
    Kindly note that Ship to party,Bill to party, payer, sold to party not shown in partners Tab.
    Eventhough SP,SH,BP,PY are assigned to customer KU only.
    And we have assigned Partner Functions ot account Group.
    Still Ship to party,Bill to party, payer, sold to party not shown in partners Tab
    Please help.
    Regards,
    Rajkumar.C

    Hi
    Please check the following setting once again in spro > sales and distribution > baisc function > partner determination > For customer master
    1. check for partner determination procedure AG , if you have created a new one then please check whether it is there in the list.
    2.Select the AG and then check for whether the partner function has been made mandatory in the procedure or not.
    tick mark  SP, BP,SH,PY , since Sold to party should not be allowed to change so mark it as Not Modifable
    3. partner determination procedure assingment for the account group. AG should be assinged to your account group
    4. Account Group Function assingment - Make sure your all the partner function SP,BP.PY.SH has been assinged to the Account group here.
    Thanks
    RB

  • Contract: Sold/Ship-to-Party fields not available

    Hi Experts,
    I created a new Contract Type in one client A, copying the contract type settings from another client B.  The config in client B is working.  However, when I try testing my new Contract Type in client A, the Sold/Ship-to-Party fields not available (greyed out).
    What config did I miss?
    Thanks!

    Dear January,
    This may due to partner determination settings for that sales document type.So please go through this IMG path do the proper settings then try.
    IMG>Sales and Distribution>Basic functions>Partner determination>setup partner determination-->
    Set Up Partner Determination for Sales Document Header
    Set Up Partner Determination for Sales Document Item
    Check these settings
    Partner Functions in Procedure
    Partner Determination Procedure Assignment
    Partner Functions
    Account Groups - Function Assignment
    I hope this will help you,
    Regards,
    Murali.

  • Ship To assignment to Sold To not needed in Order

    Hi experts,
    Can I book an order with a ship to who is not assigned to the sold to ?
    Ex: Sold to 1000 has 2 ship tos --> 1001 & 1002
    Sold to 2000 has 1 ship to --> 2001
    Can I book an order with Sold to 1000 and ship to 2001 ?
    I am surprised to see this happen. My system (4.7) lets me do this. Looks like I need a patch update but thought I would confirm.
    Thanks !
    VA01, Partner functions, XD01, Ship to part, Sold to party.

    Can I book an order with a ship to who is not assigned to the sold to ?
    Yes, you can do it in versions 4.7EE and above, provided the customer master exists for the ship to in this sales area.
    I remember, it is not possible in 4.6C (and other older versions).
    Thanks,
    Ravi

  • Proper value of ship to party not geting picked up for a given sold toparty

    Hello,
    We have a   bdc program which passes data to the VA01 transaction. We are passing partner values like sold to party and ship to party using this program. However when we open our order, the value of ship to party is getting replaced by the value of sold to party. We debugged the program but could not find out the reason. This problem is there only for one sold to party value. It is working fine with other values of sold to party. We feel it is some master data setting for this particular sold to party that is responsible for this behaviour.
    Please let us know incase you have any possible suggestion.
    Thanks in advance.

    Harsh is right, need to check your partner functions tab in the sales area view of the customer master. There should at a bare minimum be one reference to function SH and a number. If there is more than one ship-to then your program must have logic to derive what is right ship-to to be used. I am wondering if this is the case and your program is defaulting to first SH available, that being the sold-to number. Please review and advise.
    Thanks,
    Jay

  • Ship to party not assigned to sales area

    Hi everybody
    When I am creating sales order for a customer in the sales area into which it's CMR is maintained  eg. 1000, 10 , 00. I get an error message ' ship to party...is not assigned to sales area 1000, 10, 01.'' Here SP is also SH.
    I checked the common Distribution Channel & common Division Master Data & the ref dc & ref dv are properly maintained. I don't know from where system is taking division 01.

    Hi,
    Please check VOV8(Sales documet type control).Here in the document type which you are using,check if Item condition field is marked.If it is marked then system is checking the division of the material you are using.
    Extend the customer to 1000/10/01 and then try creating the order.
    Reward points if useful
    Regards,
    Amrish Purohit

  • Block sold-to-party not ship-to-party

    Hi experts,
    Let us assume that i have a create a sales order which has sold to partt customer A and ship to party customer B.
    Now, in our SAP system, if customer A is not block during credit limit check and customer A is block at credit limit we cannot delivery the goods.
    Is there any possibility to , in this case, the goods to be delivered even ship-to-party is blocked at credit limit?

    I was wrong with credit block.
    In my situation we're talking about XD05 blocking.
    So the problem is we use transaction XD05 where we can block customer at order, delivery and billing.
    For example, if customer A has order block in XD05 than if we create a order and ship-to-party is customer A that we cannot create order.
    We have a similar situation in our company and i'm wondering if is possible to create a order even the ship-to-party is block to order in XD05.
    is this possible?

  • BDOC Error: A number range is not assigned to account group Sold-to party

    Hi Experts,
    We have a stuck BDOC for a BP with "ZEmployee" (custom) role in CRM with error as "Fill in Required fields". We knew this is b'cos one of the mandatory field in not maintained in CRM. After maintaining the mandatory field in CRM; we are re-processing the stuck BDOC and again it is getting into the error message with error "A number range is not assigned to account group Sold-to party".
    We have checked the number range and grouping configuration both in ECC and CRM. But still not able to identify the gaps. Is there a detailed step-by-step approach which can be taken up to resolve the issue.
    Request you quick response.
    Thanks,
    Chaudh.

    Hi Chaudh,
    Please find the exact solution here.
    http://wiki.sdn.sap.com/wiki/display/CRM/IssuesduringBusinessPartnerreplicationbetweenCRMandERP
    Cheers,
    Josh

Maybe you are looking for