Shipment problem

We're about to begin loadplanning deliveries from SRLL in TMS. When I send a shipment from TMS into SAP, it fails - Departure point: the location indicates non-existing address LOC$000001
I'm able to send shipments’ from WWTD to SAP without issue.
These two (WWTD,SRLL) are using the same function module.
please suggest the where the error will generated.
and one more thing the successfull idoc shipment no is equal the document flow shipment id .so those are successfull
the failed idocs(SRLL) are having idoc shipment id and doc flow shipment id are differ .
i don't know where the error is generated.
please suggest.

hi, which transaction are u using vt01n or vt01 ..
regards,

Similar Messages

  • Pre-Ordere​d, employee failed to place my order, didn't get phone.

    On the 14th, I gave BB Mobile $50 and got the gift card, but the employee who set me up failed to actually PLACE the order for my phone.  She admitted this when I showed up on the 21st, and her manager explained that everyone who had pre-ordered showed up to pick up their phone on the 21st except for three people.
    They placed my order (as they were supposed to on the 14th) and said I might get a phone IF the three remaining people who hadn't yet picked up their phones failed to do so by COB on Sunday the 23rd (today).
    I'm tired of taking "There's nothing we can do about it, sorry," as an answer when I did what I was supposed to do a week before release.  I even asked them if that was all there was to it.  It seemed pretty simply and easy to me and I was sure there was something missing in the process.
    Now it looks like I'm part of the group of people who, according to most recent news, will have to wait until October 21st or later to receive phones.
    It's not a bait and switch.  They're not 'calling it a preorder when it's something else' like I see other people on the forums claiming.  The receipt I got even says "prerorder, physical reservation," and specifies 32G Black as I requested.
    The store is in Melbourne, Florida, on New Haven.  Anyone else had this happen to them?

    It appears, at least for the Melboune store I frequent (or used to frequent), that the "not even getting the shipments" problem has not happened to them for all AT&T phones.  Word I'm getting is that Sprint and Verizon have failed to meet their agreement with Best Buy to have their phones to them by release.  This is admittedly between Best Buy and Sprint/Verizon as to how they'll deal with each other in the future.  Understandibly, as far as any Sprint or Verizon customer's concerned, this is Best Buy's screwup.  From a busines standpoint, it kind of IS.  Best Buy trusted Sprint and Verizon, and they got screwed, and now they have to eat crow and anger customers who happen to go with Sprint and Verizon.
    I seem to be the SOLE AT&T customer at the Melbourne store that is angry, and it's only because this new minimum-wage chick at the store messed up (even though she had a non-new person behind her telling her what to do the whole time), so the most I can hope for is that they'll get a shipment in on Monday that has my phone in it.
    I keep telling myself, it's a want, not a need, it's just a phone, but darn it...  I was really looking forward to having the 5.  I have a 4 (never got the 4S) that I've had since the day it came out, and though it's served me often and faithfully, I was really looking forward to that 5!   
    It's just stuff.  It's just stuff...

  • I want to buy iPhones (4S and 5) and want to buy them in US $. But want Apple to ship them to Pakistan. I will pay the charges of shipment once told. I want to buy the iPhones in Contracts. I'll unlock them myself no problem. Is that possible? Apple ans?

    I want to buy iPhones (4S and 5) and want to buy them in US $. But want Apple to ship them to Pakistan. I will pay the charges of shipment once told. I want to buy the iPhones in Contracts. I'll unlock them myself no problem. Is that possible? Apple ans?

    No, you can't do what you want. Apple will only ship a US iPhone to a verified billing/shipping address in the US.

  • Problem during creation of shipment document and shipment cost document

    Hi
    My client  facing problem during creation of shipment document and shipment cost document at the time of Batch Job
    Delivery no 897654: goods issue on 30.11 at 13:22. Shipment on 30.11 (VT01N).
    Shipment costs on 1.12 (VI01).
    the problem is the shipment document get created on 30.11.2010 but the shipment cost document get created on 1.12.2010
    pleas advice.

    Hi,
    Please check the batch job processing log.
    As per my understanding, business requires to generate the Shipment & Shipment cost documents immediatley.
    However there is some time between the documents creation time. I dont see any issue in the data or problem in the delivery docs Because system will not generate the shipment docs after 1 or 2 days if there is an issue with the data . There must be problem in the Batch Job.
    Analyse the batch jobs and timing of the job process.
    Let us know your feedback...
    Best Regards,
    MKumar

  • Problem in clearing the shipment costs to transporter

    Hellow,
    Scenario:
    Step1:
    1. I created on PO and I did one inbound delivery with reference to PO.
    2. Then i did inbound shipment, and shipment cost document.
    3. Shipment costs calculated based on weight of the delivery material, Here Weight is 3 To with 300/- per TO.
    Total amount is 900.
    3. Then i did MIGO with reference to inbound delivery.
    4. Now system copied shipment costs to material costs.
    5. Then i did MIRO for planned delivery costs(900/-) with reference to PO.
    Step2:
    1. same way i did one more inbound delivery for open items
    2. Shipment document with reference to Inbound delivery.
    3. Shipment cost document created, Here also only 3 To weight, but the freight rate is 200/- per TO, total cost is 600 only.
    4. I did MIGO with reference to Inbound delivery
    5. When i do the MIRO with reference to same PO for remaining 600/- planned delivery costs, system is not copying the 600/- from PO. It is copying the average on 900+600 for remaining delivery costs.
    If we go with same freight rates this kind of problem is not happening. In different rate situation only this problem is occuring.
    Can i have any solutions please?
    With regards
    Lakki

    Hi Lakki,
    May I know what's the condition type for the freight charges involved so that we could proceed to help you further.
    Thank you.
    Best regards,
    HC.

  • Problem in Shipment purchase order number

    Hello Experts,
    At time of shipment count number(VI02), purchase order and service entry is created automatically. But whenever created new shipment count same purchase order number is updated ie sequentially not taking, but service entry has not problem.
    Pls tell why this problem is occured.

    Hi,
    It depends on customizing settings for the PO for shipment costing. You can set a period for validity of the PO. In standard it is set to a month (I believe). It will split up per forwarding agent.
    Quote of help.sap:
    The purchase order can be valid for the following periods:
    Day
    Week
    Month
    In Customizing the purchasing organization, the purchasing group and the plant must be assigned to the corresponding transportation planning point and the shipment cost type. You make these settings in the IMG. Choose Logistics Execution ® Transportation ® Shipment costs ® Settlement ® Assign purchasing data.
    End quote.
    MdZ

  • Problem with Shipment

    Hello All,
    The problem is related to shipment where  I want the system to allow processing shipment after Stock Transfer Invoice is done.As we don't get all the on-paper documents before despatch or even after 10 days of despatch we want the system to process in this way where even after the invoice is completed we will be able to book the shipment cost through T-Code VI01.But whenever  I am trying to process shipment through T Code VT01N by giving transportation planing point & shipment type,while including the delivery it is showing the message " No deliveries found".
    Though the standard rule is PGI  will automatically happen with the completion of shipment process still please suggest if any further configuration can be done in the standard SAP to process shipment after the stock transfer Invoice is done.
    Please help at the earliest.
    Thanks & Regards
    Priyanka Mitra

    Hello All,
    Now my problem is solved as in VT01N screen while including the outbound delivery we have to keep the "Total Goods Movement Status" & " Transportation Planning Status" fields as blank instead of A & A to B.If these fields are kept blank then we will be able to make shipment after the Stock Transfer Invoice.
    The other queries related to shipment are as follows -
    1) Is there any configuration possible to keep the "Total Goods Movement Status" & " Transportation Planning Status" fields as blank by default.
    2) Secondly the shipment cost calculation procedure is getting reflected in the header though it is not assigned with the header but it is automatically getting reflected in the Leg. How is this possible?
    Please suggest.
    Thanks & Regards
    Priyanka Mitra

  • Problem in Transportation - create shipment

    Hi Gurus,
    I am implementing Transportation Module , I created one shipping point for each Plant and ,one transportation planning point for each plant .
        In node " Transportation Planning Point Determination" i assigned Shipping point -Shipment type -to- Transportation planning point.
    On the basis of that , i think my transportation planning point will be determine.
    But it is not happening .
    Please guide me , whether there is any other way to determine Transporatation planning point or there is any USER EXIT for this .
    Please suggest ASAP.
    Thanks & Regards
    Devdatta Joshi

    Dear Joshi,
       --> The transportation planning point determination will not happen with the combination of shipping point and shipment type.
    --> I think No need to create transportation plannig point for each shipping point ,
    -->It will be depend upon the no.of company
    codes we can create transportation planning point for each company code and same we can assign.
    You try as bellow
    ->The Transportation planning point need to be maintain in this path IMG>Enterprise structure -->Definition > Logistic execution>Maintain Transportation planning point , here you need to assign company code to your Transportation planning point.
    Now you try to create shipment in VT01N
    I hope your problem willget solved
    Regards,
    Murali.
    Edited by: Murali Mohan.T on Feb 16, 2008 11:33 AM

  • Shipment cost problem

    Hi sap Gurus,
    i defined scales for shipment costs (VS01) :
    1) scale basis L4 (transportation zone of departure point)
    2) scale basis L5 (transportation zone of destination point)
    3) scale basis D (gross weight)
    Then i defined a condition TYPE "ZB02" that has tridimensional scales (1-2-3) and i insert it in pricing procedure SDFC00 after FB00.
    I defined a condition record, but when i do shipment cost the condition record is found by the system (in pricing procedure i see it) but it's red.
    ---> the system calculates only condition TYPE ZB01 that has bidimensional scales (gross weight & distances).
    I think that the problem is that the system don't found the right value of transportation zone of departure & destination.
    But i checked that transportation zone was defined for customer (ship to party) & for shipping point..
    any solution?
    thanks a lot
    Alba

    Dear Alba,
    This is due to not maintaining the condition record for that "ZB02" shipment cost condition type in TK11 transaction.
    After assigning the scales to ZB02 you maintain the condition record for that condition type in TK11 transaction.
    Before going to maintain the conditionrecord you make sure that you maintained access sequence to that condition type.
    As per my advaice you no need to maintain scale basis for transaportation zones.
    You can consider these scale basis
    Gross weight
    Net weight
    Volume
    Distance
    Number of different means of transportation
    Time (travel time or wait time)
    Tariff zone (destination)
    Destination region
    If you want to maintain cost Transportation zone wise you can keep these fields in the condition table based on that you can create condition record.
    For more clearence please go through this SAP help link it will help you about Shipment cost scales and condition record maintenance.
    http://help.sap.com/saphelp_47x200/helpdata/en/28/53584348be11d385ed0000e81ddea0/frameset.htm
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Oct 24, 2008 11:34 AM

  • Shipment cost calculation  - configuration problem

    hello all
    we are implementing the shipment cost calculation system and so far configured only 1 service agent  .
    the problem regarding scenarios that the shipment executed by service agents that is not configured in
    the system but the invoicing party is the one ( SA) that we configured .
    ( the SA that is configured in the system is charging us for the shipments of the
       SA that is not configured. )
    how can i get the shipment cost document to open for the invoicing party ( the one that we configured )
    but still leave the shipment under the origin service agent ( the one that isn't configured )  ?
    Regards ,
    ASA .

    Hi ,
    sorry,  i wasn't precise :
    i need to open a service entry whose based on po in order to forward to financial accounting .
    ( its a separate po that isn't part of the inbound or outbound process and i open it for  SA x  )
    Y and X are differnt transportation companys but i have some cases that SA x is charging me
    for the shipment of SA y.
    the transportaion agent in VT01N is SA y and there for the shipment cost document opens for SA y and
    looks for po for SA y .
    i have to direct the system (  by some user exit / badi  ) to seek for the po of SA x ( the one whose
    charging me for the shipment ) .
    hope this help explain my problem ,
    Regards ,
    ASA
    Edited by: ASA MOKED on Apr 12, 2009 5:47 AM

  • Hi----------shipment creation problem...........

    hi,
    i have a issue in transportation which deals with transferring of amount to the respective G/L account.
    actually three C's has to come then only billing can be done for that particular shipment.
    those three C's are
    1. calculated C fully calculated
    2.assigned   C fully assigned
    3.transferred C cully transferred
    this is the actual picture of shipments.
    but for me 1.C; 2.C; and 3.A not transferred is coming.
    actually it asked for the business area, cost centre, G/L account.
    i have satisfied  all but its showing the posting problem so its not transferring
    if sir plz how ever knows the answer can send their details to my mail id and also can post the answer in the thread so that i can award maximum marks for the contributor.
    this is my email id [email protected];
    regards,
    balaji.t

    HI Balaji
    Mail send to ur id
    Reward if useful to u

  • Shipment cost doc calulation problem

    Dear All,
    I am facing problem while creating shipment cost document, its not calculating at all. what I observed is the subitem is not getting created and its is throughing V0104 error message: Requested function B_P is not available here.
    can you please guide where is the problem, I have created shipment cost type and assigned item categories for header costs and leg costs.
    Thanks & Regards
    Suresh

    Hi,
    R u carry out configuration for shipment pricing
    IMG >>> Logistic execution >>> Transportation >>> Shipment cost >>> Pricing >>> Price controll
    Kapil

  • Problem to create shipment using idoc

    Hi,
    I am having a problem on EDI-IDOCS to create inbound shipment.
    I am using the message type SHIPPL.
    IDOC - TPSSHT01
    Process code-SHIP.
    And I am using the function module IDOC_INPUT_SHIPPL to process the idoc.
    After processing the idoc i am getting the error message - shipment has not saved( 51).
    Also i am getting the error message - Transportation planning point has no partner for transportatn. plan.
    I couldnt figure out what the error would be.
    If possible can you please help me regarding this problem.
    Thanks in advance.

    Hi Goutham,
    This is an error due to either the data or missing config. This error message is issued when the system cannot find an entry in table TTDS. Check your data and the config and make correction accordingly.
    In config it is under
    Logistics Execution> Transportation> Interfaces> External Trabnsportation Planning Systems> Maintain Transportation Planning Point for External Systems
    or if you don't have external planning system, you will find the corresponding config under
    Enterprise Structure> Logistics Execution> Maintain Transportation Planning Point.
    Your message is more related to external transportation planning point which is in the first config option above.
    If you don't have external transportatio planning, then your choice of the EDI components is wrong. Look in the code of this function module where this message is generated, you will understand.
    Srinivas

  • Shipment Delivery problem(Business critical problem)Please suggest........

    Hi Friends,
    I have one problem.Two where houses shipment documents  are transfer to customer through ALE.
    two where houses are using the same partner , same message type and function module.
    but one where house shipments documents are posted correctly.and another where house Shipment documents all are error out.
    i think this error is not related to Technical problem .
    So please mention any configuration checking for this issue.
    Please give the solution asap.it very big business critical case.
    sai.

    Dear Sai,
              Please put the details about the error what type of error you are getting? and what place(For which activity) you are getting error?
    What is the error message then only we can able to help you!!
    Regards,
    Murali.

  • PGI Problem in Shipment

    Hello Gurus,
    I am facing a problem of PGI in shipment document.
    When i click on Shipment completion tab in Shipment document, System throws the error '' Delivery in shipement could not be posted for GI''.
    Can some one throw light on this.
    thanks in advance.
    regards
    Prashant

    Hello MT,
    Many thanks for the information. Can you let me know in which transaction i can check whether the posting periods are closed.
    I know that MMPV is for closing the  posting periods. Just want to know in which transaction i can just check whether the posting periods are closed or not.
    Many thanks
    Prashant

Maybe you are looking for