Short dump when displaying purchase order

Runtime Errors         SYNTAX_ERROR
Date and Time          07.02.2007 17:02:29
Short text
     Syntax error in program "SAPLSWOR ".
What happened?
     The following syntax error occurred in the program SAPLSWOR :
     "The data object "L_ASYNC_DATA" does not have a component called "ID"."
What can you do?
     Please eliminate the error by performing a syntax check
     (or an extended program check) on the program "SAPLSWOR ".
     You can also perform the syntax check from the ABAP/4 Editor.
     If the problem persists, proceed as follows:
Error analysis
     The following syntax error was found in the program SAPLSWOR :
     "The data object "L_ASYNC_DATA" does not have a component called "ID"."
please guide me how to correct this error.

Hello Waseem,
Take help from technical guy. He can guide you what exectly you need to do after debug the program.
Regards
Arif Mansuri
Reward if answer is helpful.

Similar Messages

Make short text field in Purchase order creation only display..

Sir,
Yeah my requirement is quite unusual, but such is the situation.
I want to make the short text field in purchase order creation "only disply". what is happening is that user while creating PO is able to change the text of material in short text column. I want to make it only for display.
Can it done on document type level, since for service type, and Text type of account assignment cat, only text field is filled up. so how to do it.
Please assist...
Rahul

Dear Rahul,
If you want to have the short text display only for standard item but not service item, you may check below customizing.
Transaction SPRO:
MM-PUR-PO
-> Define screen layout at document level
Field Selection group: Basic Data, Item
Field Selection Key: PT0F Standard item purchase order
Field: Short text -> set as display
Hope this help.
Ian Wong Loke Foong

Displaying Purchase order in report

Hi Expert
I am modifing a report for Mangement , They want to display purchase order in the report .....So I did the following modification but when I run the report all the fields are displaying and purchase order is showing empty, though I have added the po in the table and if you see my coding for adding po
data: vbkd-bstkd.
clear po_number.
select single bstkd into po_number
    from vbkd
    where vbeln = s903-vgbel.
      call function 'RSAQRT_TEXTFIELD_CONTEXT'
           exporting name = 'S903'
                     struc = S903.
      call function 'RSAQRT_TEXTFIELD_CALL'
           exporting struc = S903
                     name = 'S903'
                     fname = 'MATNR'
           importing text = TEXT_S903_MATNR.
Can anyone help me please ....................it is very urgent
   include /1BCDWB/IQ000000000226DAT
*{   INSERT                                                           2
constants:
begin of %iqid,"type aqliqid
    workspace type aql_wsid   value ' ',
    usergroup type aql_ugroup value 'SALES',
    query     type aql_query value 'BILL_DEL',
    lid       type aql_lid    value 'G00',
    struct    type aql_tname value '/1BCDWB/IQ000000000226',
    infoset   type aql_iset   value 'S903',
end of %iqid.
data %runmode type aqlimode.
data %seloptions type table of rsparams with header line.
field-symbols <%selopt> type rsparams_tt.
data TEXT_S903_FKART like TVFKT-VTEXT.
data TEXT_S903_FKSTO like DD07D-DDTEXT.
data TEXT_S903_GEWEI like T006A-MSEHL.
data TEXT_S903_KDKG1 like TVKGGT-VTEXT.
data TEXT_S903_KDKG2 like TVKGGT-VTEXT.
data TEXT_S903_KDKG3 like TVKGGT-VTEXT.
data TEXT_S903_MATNR like MAKT-MAKTX.
data TEXT_S903_MATNR_01 like MAKT-MAKTX.
data TEXT_S903_PERIV like T009T-LTEXT.
data TEXT_S903_PKUNAG like KNA1-NAME1.
data TEXT_S903_PKUNAG_07 like KNA1-NAME1.
data TEXT_S903_PKUNWE_01 like KNA1-NAME1.
data TEXT_S903_PMATN like MAKT-MAKTX.
data TEXT_S903_SPART like TSPAT-VTEXT.
data TEXT_S903_VKBUR like TVKBT-BEZEI.
data TEXT_S903_VKBUR_05 like TVKBT-BEZEI.
data TEXT_S903_VKORG like TVKOT-VTEXT.
data TEXT_S903_VKORG_03 like TVKOT-VTEXT.
data TEXT_S903_VOLEH like T006A-MSEHL.
data TEXT_S903_VRKME like T006A-MSEHL.
data TEXT_S903_VSTEL like TVSTT-VTEXT.
data TEXT_S903_VTWEG like TVTWT-VTEXT.
data TEXT_S903_VTWEG_04 like TVTWT-VTEXT.
data TEXT_S903_WAERK like TCURT-LTEXT.
data TEXT_S903_WERKS like T001W-NAME1.
data TEXT_S903_WERKS_01 like T001W-NAME1.
data TEXT_S903_ZZ_MGN like DD07D-DDTEXT.
data SP_ADD like VBPA-ADRNR.
data CUST_NAME like KNA1-NAME1.
data SHADD like VBPA-ADRNR.
data SHNAME like KNA1-NAME1.
data ADDRS like ADRC-STREET.
data MANDCK like LIKP-BOLNR.
data CMDDOC like LIKP-XABLN.
data EXT_DEL like LIKP-LIFEX.
*****ADD BY PIROZ
data PO_NUMBER like VBKD-BSTKD.
*data TEXT_S903_MATNR like MAKT-MAKTX.
TOTAL
data %Z_0001 like S903-NETWR.
CON_MARG
data %Z_0004 like %Z_0001.
CON_MRG_PC
data %Z_0005 like %Z_0001.
tables S903.
Function----
FUNCTION /1BCDWB/IQ000000000226EXTR.
""Local interface:
*"       TABLES
*"              %SELOPT STRUCTURE RSPARAMS
*"              %DTAB STRUCTURE /1BCDWB/IQ000000000226
*"       CHANGING
*"             VALUE(%RTMODE) TYPE AQLIMODE
*"       EXCEPTIONS
*"              NO_DATA
*"              NO_AUTHORIZATION
*"              ILLEGAL_PACKAGE
*"              CURSOR_NOT_OPEN
call function 'RSAQRT_SET_IDENTIFICATION'
       exporting iqid        = %iqid
                 sscr_report = sy-repid
       changing rtmode      = %rtmode.
if %rtmode-pack_on = space or %rtmode-first_call = 'X'.
    call function 'RSAQRT_FILL_SELECTIONS'
         tables   selopt = %selopt
         changing rtmode = %rtmode.
endif.
call function 'RSAQRT_INIT_TEXTHANDLING'
       exporting class   = 'CL_TEXT_IDENTIFIER'
                 wsid    = ' '
                 infoset = 'S903'.
if %rtmode-no_authchk = space
     and ( %rtmode-pack_on = space or %rtmode-first_call = 'X' ).
    refresh %auth_tabs.
    append 'S903' to %auth_tabs.
    call function 'RSAQRT_AUTHORITY_CHECK'
         exporting
            auth_tabs         = %auth_tabs
         changing
            rtmode            = %rtmode
         exceptions
            NO_AUTHORIZATION = 1.
    if sy-subrc = 1.
      raise no_authorization.
    endif.
endif.
data: %l_no_further_fetch type flag, " stop fetching
        %l_hits_cnt         type i.    " cnt for %dbtab entries
if %rtmode-pack_abort = 'X'.
    if not %dbcursor is initial.
      close cursor %dbcursor.
    endif.
    exit.
endif.
if %rtmode-pack_on = space or %rtmode-first_call = 'X'.
    if not %dbcursor is initial.
      close cursor %dbcursor.
    endif.
    open cursor with hold %dbcursor for
    select FKDAT VBELN FKART VKORG PKUNAG PKUNWE_01 MATNR VKBUR FKIMG VRKME FKSTO WERKS NETWR WAERK MWSBP VGBEL VGPOS ERNAM POSNR
           VSTEL AUBEL KZWI1 KZWI2 ZZ_CART ZZ_MINCAR ZZ_WKND ZZ_FUEL UMSMNG KZWI4 KZWI3 ZZ_MGN WAVWR SPTAG
           from S903
           where SPTAG in SP$00001
             and ERNAM in SP$00012
             and WERKS in SP$00008
             and MATNR in SP$00006
             and PKUNAG in SP$00004
             and VKORG in SP$00005
             and FKART in SP$00007
             and VBELN in SP$00002
             and FKDAT in SP$00003.
endif.
if %dbcursor is initial.
    raise cursor_not_open.
endif.
while %l_no_further_fetch = space.
    fetch next cursor %dbcursor
          into corresponding fields of S903.
    if ( ( %rtmode-acc_check = 'X' and
           sy-dbcnt > %rtmode-acc_number )
        or sy-subrc <> 0 ).
      %l_no_further_fetch = 'X'.
    else.
      call function 'RSAQRT_TEXTFIELD_REFRESH'.
additional coding:
data: vbpa-kunnr,
         vbpa-parvw,
         vbpa-adrnr.
clear sP_add.
select single adrnr into SP_ADD
     from vbpa
     where vbeln = s903-vbeln and
           kunnr = s903-pkunag and
           parvw = 'AG'.
additional coding:
select single name1 into cust_name
     from adrc
     where addrnumber = sp_add.
additional coding:
data: adrc-name1,
         adrc-addrnumber.
clear shadd.
select single adrnr into SHADD
     from vbpa
     where vbeln = s903-vbeln and
           kunnr = s903-pkunwe_01 and
           parvw = 'WE'.
additional coding:
clear shname.
select single name1 into shname
     from adrc
     where addrnumber = shadd.
additional coding:
*{   REPLACE                                                          1
\ data: adrc-street.
\ select single street into addrs
\   from adrc
\    where addrnumber = shadd.
data: adrc-street.
select single street into addrs
   from adrc
    where addrnumber = shadd.
*}   REPLACE
additional coding:
data: likp-bolnr.
clear mandck.
if s903-vgbel ne space.
    select single bolnr into mandck
      from likp
      where vbeln = s903-vgbel.
endif.
      check SP$00009.
additional coding:
data: likp-xabln.
clear cmddoc.
select single xabln into cmddoc
    from likp
    where vbeln = s903-vgbel.
      check SP$00010.
additional coding:
data: likp-lifex.
clear ext_del.
select single lifex into ext_del
    from likp
    where vbeln = s903-vgbel.
      check SP$00011.
additional coding:
data: vbkd-bstkd.
clear po_number.
select single bstkd into po_number
    from vbkd
    where vbeln = s903-vgbel.
      call function 'RSAQRT_TEXTFIELD_CONTEXT'
           exporting name = 'S903'
                     struc = S903.
      call function 'RSAQRT_TEXTFIELD_CALL'
           exporting struc = S903
                     name = 'S903'
                     fname = 'MATNR'
           importing text = TEXT_S903_MATNR.
additional coding:
   %Z_0001 = S903-NETWR + S903-MWSBP .
      %dtab-FKDAT = S903-FKDAT .
      %dtab-VBELN = S903-VBELN .
      %dtab-FKART = S903-FKART .
      %dtab-VKORG = S903-VKORG .
      %dtab-PKUNAG = S903-PKUNAG .
      %dtab-CUST_NAME = CUST_NAME .
      %dtab-PKUNWE_01 = S903-PKUNWE_01 .
      %dtab-SHNAME = SHNAME .
      %dtab-ADDRS = ADDRS .
      %dtab-MATNR = S903-MATNR .
      %dtab-TEXT_S903_MATNR = TEXT_S903_MATNR .
      %dtab-VKBUR = S903-VKBUR .
      %dtab-FKIMG = S903-FKIMG .
      %dtab-VRKME = S903-VRKME .
      %dtab-FKSTO = S903-FKSTO .
      %dtab-WERKS = S903-WERKS .
      %dtab-NETWR = S903-NETWR .
      %dtab-WAERK = S903-WAERK .
      %dtab-MWSBP = S903-MWSBP .
      %dtab-WAERK001 = S903-WAERK .
      %dtab-VGBEL = S903-VGBEL .
      %dtab-VGPOS = S903-VGPOS .
      %dtab-MANDCK = MANDCK .
      %dtab-CMDDOC = CMDDOC .
      %dtab-EXT_DEL = EXT_DEL .
      %dtab-ERNAM = S903-ERNAM .
      %dtab-%Z_0001 = %Z_0001 .
      %dtab-WAERK002 = S903-WAERK .
      %dtab-POSNR = S903-POSNR .
      %dtab-VSTEL = S903-VSTEL .
      %dtab-AUBEL = S903-AUBEL .
      %dtab-KZWI1 = S903-KZWI1 .
      %dtab-WAERK003 = S903-WAERK .
      %dtab-KZWI2 = S903-KZWI2 .
      %dtab-WAERK004 = S903-WAERK .
      %dtab-ZZ_CART = S903-ZZ_CART .
      %dtab-WAERK005 = S903-WAERK .
      %dtab-ZZ_MINCAR = S903-ZZ_MINCAR .
      %dtab-WAERK006 = S903-WAERK .
      %dtab-ZZ_WKND = S903-ZZ_WKND .
      %dtab-WAERK007 = S903-WAERK .
      %dtab-ZZ_FUEL = S903-ZZ_FUEL .
      %dtab-WAERK008 = S903-WAERK .
      %dtab-UMSMNG = S903-UMSMNG .
      %dtab-VRKME001 = S903-VRKME .
      %dtab-KZWI4 = S903-KZWI4 .
      %dtab-WAERK009 = S903-WAERK .
      %dtab-KZWI3 = S903-KZWI3 .
      %dtab-WAERK010 = S903-WAERK .
      %dtab-ZZ_MGN = S903-ZZ_MGN .
      %dtab-WAVWR = S903-WAVWR .
      %dtab-WAERK011 = S903-WAERK .
      %dtab-PO_NUMBER = PO_NUMBER .
      append %dtab.
      %l_hits_cnt = %l_hits_cnt + 1.
      if %rtmode-pack_on = 'X'
         and %l_hits_cnt >= %rtmode-pack_size.
        %l_no_further_fetch = 'X'.
      endif.
    endif.
endwhile.
if %l_hits_cnt = 0.
    if not %dbcursor is initial.
      close cursor %dbcursor.
    endif.
    raise no_data.
endif.
if %rtmode-pack_on <> 'X'.
    close cursor %dbcursor.
endif.
read table %dtab index 1 transporting no fields.
if sy-subrc ne 0.
    raise no_data.
endif.
endfunction.

I had Done Like this All comments are as they are i.e. this code gives error (for endselect there is no select) so i commented the endselect statement.
read below code and plz do some improvement in it.
SELECT ekkoebeln ekkobedat ekpo~werks into CORRESPONDING FIELDS OF TABLE it_so    FROM EKKO
                  INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
                  WHERE ekko~EBELN IN S_EBELN
                  AND   BEDAT IN S_BEDAT
                  AND   WERKS IN S_WERKS.
"SELECT hEBELN hMATNR hWERKS e FROM EKPO INTO CORRESPONDING FIELDS OF TABLE it_so
      "                 WHERE EBELN IN S_EBELN
      "                 AND WERKS IN S_WERKS.
MOVE EKKO-EBELN TO TNAME.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'F02'
LANGUAGE = 'E'
NAME = TNAME
OBJECT = 'EKKO'
ARCHIVE_HANDLE = 0
"IMPORTING
" HEADER = HTEXT
TABLES
LINES = LTEXT
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8.
LOOP AT LTEXT.
IF LTEXT-TDLINE NE ''.
MOVE LTEXT-TDLINE TO IT_SO-TDLINE. " Header Note Selected.
MOVE EKKO-EBELN TO IT_SO-EBELN.
APPEND IT_SO.
endif.
ENDLOOP.
clear it_so.
"ENDSELECT.

Display Purchase order, PO Item , Order Number ,entry sheet quantity ,entry sheet price ,invoice quantity, invoice price against each line number

hello all,
i have an ALV report requirement like this,
on the initial screen i have displayed(for a given agreement number like in ME33K )
in the selection screen i have taken agreement number as EKPO-EBELN.
purchase document number        item number        short text        target quantity      net price
5400000019                                  1                      xxx                  1.000                  304300.00
                                                    2                     xxxx                 1.000                  500000.00
the above fields i have taken from EKPO table.....
and on double clicking the item number i have displayed
line number          service number       short text           quantity    units    gross price   quantity released
1                           swr10                   xxxx                 2.00          kg          500             2
2                           swr11                    xxxx                5.00          EA         500             2
the above fields i have taken from ESLL (esll-extrow, esll-srvpos, esll-ktext1 , esll-menge etc......)
this i have done by passing EBELN to ESLH and getting PACKNO and passed this PACKNO to ESLL.
now my question is i need to display Purchase order, PO Item , Order Number ,entry sheet quantity ,entry sheet price ,invoice quantity, invoice price
against each line number above.....
from which table do i need to take these fields.....
please guide me....
thankq....

Thanks Andra,
The problem is the multiple invoices is for non goods receipt item so there will be no delivery.At the time of creating a PO the GR is not checked so there will be no delivery .
Also this setting is for invoices which are comming from Vendors.But if we are genrating the invoices manually it is not blocking those invoices.Also i there is nowhere mentioned in Incomming invoice to set tolerence for incomming invoice.Are you talking about Vendor tolerences?
Thanks in advance
Edited by: Metroid01 on May 14, 2009 6:52 PM

Display Purchase Order Approval after Goods Receipt

Hi,
I would like to know if there is a way to view/display purchase order even though it was already received (Goods Receipt)? I would like to know who are the approvals of that particular purchase order, the units/quantities and the amount.
Thank you.

Hi Reno,
But if the PO was already received in full it will not be anymore available in the Approval Status Report.
Is the Approval Decision report available to Logistic personnel?
Regards,
Hi Demarillas,
If the document is approved and u want to check the details of who approved the PO and when, you can make use of the Approval Decision Report, located in Administration --> Approval Procedure --> Approval Decision Report . Also there is another report to check with the status of the documents sent for approval which is Approval Status Report .
Hope this helps.
Regards
Reno

Workflow issue when create Purchase Order automaticlly based on Sales Order

dear experts,
I got a problem when create purchase order automatically once the Sales Order created, the field ERNAE of the Purchase Order creatd is WF-BATCH, but we want this field to be the user log in the system, like John. Smith
it seems this is a configuration issue, but i am not familar with workflow, do you experts have any solutions?
thank you in advance.
Hongtao

thank you for you reply my friend.
yes, i mean the PO creator.
I just create a SO in VA01, then change the Schedule line category from CN to CP, then SAVE, then Confirm the Delivery Proposal. after all this, the PO will be created automatically by Workflow. Because when I display the PO via ME23N, it displays [Standard PO XXXXX created by Workflow-System] on the top of the screen.
But i do not know which workflow is trigered to create the PO. and i tried SWEL like you said, there is no record listed.
do you have any other suggestions? thank you so much, friend.

Show OrderType along with name in Display purchase order

Hi All,
When we display purchase order via transaction ME23N, first field on the top left hand corner shows description "Purchase order", "Production order" etc..... Here I would like to see order type (ZB,ZR,ZV etc) along with description.
There is some way to do that settings. Could someone please let me know step by step process how to set that??
Thanks.............

Hi
In me21n screen in the tool bar the icon called customised local layout.
In this select options
In this select Expert
In this control tab
Check the check box for show keys in all drop down lists and press ok...
It will come
Regards,
Raman

Short Dump When Installing Key Figure Catalog from BI Content

Hi Friends,
I get a Short dump when trying to Install a Key Figure Catalog (in Purchasing) from the BI content. This is what the Error Says ,
" You Attempted to Use a "NULL" object reference (Points to nothing) access a component (variable : " "). An Object reference must point to an object (an instance of class ) before it can be used to access components.
Any input will be greatly appreciated,

Hi Michal,
this bug hits only patch level 201 of the DBSL. Please update the DBSl.
Regarding the ABAP code I do not believe that the hint helps in this case but it should not cause any problems either. If this hint is applied more PREPARE calls are neccessary since before every execution a new statement text is assembled.
The advantage of SUBSTITUTE_VALUES hints is that the database optimizer get more information through the statement text. The downside is that a new statement is generated every time. E.g. you won't find the statement as a top scorer in a SQL cache analysis if the access plan is still bad.
Regards
Frank

Short dump when assigning revision to notification (iw22)

Hello!
We have a short dump when we try to assign a revision to a notification in iw22.
The dump occurs when we save after assigning a revision. We have the lollowing message:
Message CO888 : Error when reading order header with index
Include LCOBHIC2, line 39
The OSS note 1101437 doesn't solve our problem.
Can you help me?
Thanks by advance,
Laurent.

I tried your tests.
I haven't a dump neither for the first test nor for the second one.
The dump occurs only when:
- I create a notification
- i create an order and assign it to this notification.
- i save the notification and the order
- i assign a revision to the notifiaction and save
There isn't dump if i assign revision number before the order creation. In fact, the dump only occurs if a assign a revision number after the assignment of the order to the notifiation.
I'm checking user exit.
Thanks,
Laurent.

Short Dump when the Bex-Report scheduled for Broadcast

Hi Guru's
I am getting the short dump when I am scheduling the Bex-Report for Broadcasting. Need your help to reslove this issue.
Thanks
Navin
Note
The following error text was processed in the system BDV : The current application triggered a termination with a short dump.
The error occurred on the application server spdbwd01_BDV_05 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: INTERNAL_ERROR of program SAPLSDCL
Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SDOK_PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SKWF_PHIO_CONTENT_ACCESS_GET of program SAPLSKWF_CONTENT
Method: COPY_MIME_TO_FOLDER of program CL_RSRA_KWF_UTILITIES=========CP
Method: GET_STYLESHEET of program CL_RSRA_KWF_TMPL==============CP
Method: CONSTRUCTOR of program CL_RSRA_KWF_TMPL==============CP
Method: SET_TEMPLATE_FOLDER of program CL_RSRA_ENGINE_BC=============CP
Method: CONSTRUCTOR of program CL_RSRA_ENGINE_BC=============CP
Method: EXECUTE_SINGLE of program CL_RSRA_JOB===================CP

HI Navin,
Check the short dump analysis in T-code ST22.
and also check the Information Broadcast Settings / Configuration
Check the error for Emails in t-code SCOT. BASIS Consultants will help you on this issue.
Regards
Daya Sagar

Short dump while displaying cube data in production

Hi Folks,
I'm getting a short dump while displaying cube data in production, please suggest
Thanks and Regards
Santhosh

Hi Santosh,
I'd suggest to follow as per SAP Note: 568768 - Analysis of SQL Errors causing Shortdumps or Error messages. The Note contains precise steps to analyze such an ABAP dump.
cheers
m./

Display Purchase Order in SRM 7.0 -workflow error

Hi SRM Gurus,
Hi Masa ,
Please check this thread,
I am having the same error
We are upgrading from SRM 3.0 to SRM 7.0.
while displaying purchase order
Cannot get process info; function BBP_PDH_WFL_APPROVAL_SIMULATE throws exception Workflow Not Found
PDO Layer error
PDO Layer error
No approval Workflow Found. Inform System Administrator.
I have configured the Workflow as Application controlled workflow only.(client wants to use the same workflow used in SRM 3.0). I got message Business object BUS 2203 modified
How to resolve this
Please give your inputs
Regards
G.Ganesh Kumar

Hi Ganesh,
I also encounter this error for purchase orders. How did you check the errors you encounter in business object BUS2201?
Please refer to below thread.
[SRM 7.0 Error in Display of Approval in Purchase Orders|SRM 7.0 Error in Display of Approval in Purchase Orders]
Would really appreciate your help.
Thank you.

Facing short dumps when trying to open session in CSA

Hi
All am facing Short dump when i am trying to open session in CSA
Error detials:
go to System Administration workcenter task management up CSA. Choose the Solution
got short dump:
Short text
    Length error occurred in IMPORT statement.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
     not caught in
    procedure "LOAD" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    During import the system discovered that the target object has
    a different length than the object to be imported.
Missing RAISING Clause in Interface
    Program                                 SAPLDSVAS_PROC
    Include                                 LDSVAS_PROCTAI
    Row                                     1.431
    Module type                             (METHOD)
    Module Name                             LOAD
Trigger Location of Exception
    Program                                 SAPLDSVAS_PROC
    Include                                 LDSVAS_PROCTAI
    Row                                     1.514
    Module type                             (METHOD)
    Module Name                             LOAD
Please help me to solve this problem
Regards,
Neni

Hello Neni
According to the information I saw in that post it could be caused by a sort of inconsistency of the program code vs a structure.
Wether that is a bug that is in your SAP Solution Manager release or something that is caused by administrative actions (perhaps solving SPAU entries after SP stack update or upgrade) I cannot tell.
I would recommend you either try and find a relative SAP note (narrowing down result to only your SAP Solution Manager system) and searching using the dump keywords. If you cannot find anything I would recommend you to open a customer message so SAP can take a look at the specific error.
If you give more information, perhaps someone on the forum can help you out abit better, which SAP Solution Manager version and so on.
You also didn't answer my question, any recent changes you are aware of ?
Kind regards
Tom

How to Display 'purchase order text' in MM03 using report program

Hi Friends,
Can anybody suggest me how to display 'purchase order text' in MM03 using report program.
'Purchase order text' tab displays purchase long text of particular material .
I coded as:
      SET PARAMETER ID 'MXX' FIELD 'E'.
      SET PARAMETER ID 'MAT' FIELD k_final-matnr.
      SET PARAMETER ID 'WRK' FIELD k_final-werks.
      CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
It displays Purchasing tab other than Purchase Order Text tab of MM03.
Please suggest me how can i solve this.
Is there any parameter id to set values for Purchase Order text tab

>
Madhu Mano Chitra wrote:
> I want how to navigate to MM03 'Purchase Order text' tab/ view using ABAP code.
> could any suggest me
You can call a transaction and pass it a BDC table that tells it where you want it to go. You have to work out for yourself what to put into the BDC table. The code below works for tcode CATSSHOW.
DATA: bdcdata_wa TYPE bdcdata,
      bdcdata_tab TYPE TABLE OF bdcdata.
DATA opt TYPE ctu_params.
   CLEAR bdcdata_wa.
    bdcdata_wa-program = 'CATSSHOW'.
    bdcdata_wa-dynpro   = '1000'.
    bdcdata_wa-dynbegin = 'X'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'SO_STATU-LOW'.
    bdcdata_wa-fval = '20'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'ANDZEIT'.
    bdcdata_wa-fval = SPACE.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'PAST'.
    bdcdata_wa-fval = 'X'.
    APPEND bdcdata_wa TO bdcdata_tab.
    IF p_selscr = SPACE.
       CLEAR bdcdata_wa.
       bdcdata_wa-fnam = 'BDC_OKCODE'.
       bdcdata_wa-fval = '=ONLI'.
       APPEND bdcdata_wa TO bdcdata_tab.
    ENDIF.
    opt-dismode = 'E'.
    opt-defsize = 'X'.
CALL TRANSACTION 'CAPP' USING bdcdata_tab OPTIONS FROM opt.

Short Dump when trying to open C-project due to status

Hi,
We have a daily batch job in CRM that reports all the project ID's and
sends e-mails out to recipients.
As part of this report it retrieves the statuses for the project ID's,
however the report short dumps when retrieving the status for one of
the projects because it is not finding an active status.
When we try and open the project in C-projects we get the same short
dump error: CX_DPR_FATAL_ERROR so we cannot view or update the status.
When we investigate this issue we find that in table CRM_JCDS there are
3 entries for this project ID. One of the statuses is inactive (I1703)
but there is another status that is active (I1701). The two status
entries were created at exactly the same date and time and by the same
user.
In table CRM_JEST there is only one entry shown which shows an inactive
status and we believe this to be the wrong status. Please can you
advise if this status conflict is causing the problem and also how to
resolve this issue?

Hi Paul,
generally, the project and its elements must have an active status in table CRM_JEST, however, at this point it is not clear how this inconsistency arised. There is no SAP standard report or a 'generally valid' solution that could solve this issue, however, I found a customer message that you have opened in September with exactly the same problem. A colleague from the development team already provided you with a correction report, but there was no feedback from your side if it helped or not.
It is very difficult to provide help as inconsistencies can have several different causes, so the best would be to have this checked in a customer message with an example.
Regards,
Silvia

Short dump when displaying purchase order

Similar Messages

Maybe you are looking for