Short Text in PO change History

Hi Experts,
I am developing a report for changes in PO History.
I have fetched each and every field except the  the field for short text
The way to see the PO history change is
Tcode: ME23n
Select any item from item details, and follow the path in menu bar Environment-->Item Changes.
A new window will get open.
There the third field is of short text description. I want this field. 
Plz tell me the table nameu2026
hav a gr8 day ahead..
Regards,
Apoorv sharma

Hi Apoorva,
To get short text, you have to get the fieldname and tablename and that you can get from CDPOS. After getting that :
1.Pass Table name and fieldname to DD03L table and get field value of fieldname 'ROLLNAME'.
2.Pass this value to table DD04T and get field DDTEXT.
For example, you want to get the short text and Table name has EKPO and fieldname has MENGE. Then once you pass field name MENGE and table name EKPO to table DD03L, then you will get field DD03L-ROLLNAME as BSTMG.With DD03L-ROLLNAME as BSTMG pass to table DD04T and get field DDTEXT, you will get Purchase Order Quantity.
Thanks & Regards,
Faheem.

Similar Messages

  • PR TO PO "SHORT TEXT" CHANGED IN PO ERROR MSG

    Sir,
    while making po with pr for short text if user changes the PR short text description in PO
    error message should be issued
    ply help
    regards
    amey

    In standard SAP you can set the configuration to issue a message if the PR is different than the PO.
    Examples
    055   Purchase requisition &, item &, not released for ordering
    056   Purchase requisition &, item &, has a different material number
    057   Purchase requisition &, item &, has a different plant
    058   Purchase requisition &, item &, has a different supplying plant
    059   Purchase requisition &, item &, has different account assignment category
    068   Requisition & item & has different purchasing group
    076   Materials of requisition & item & alr. ordered in full
    However, if there is no material master involved and the text is altered from PR to PO during PO creation, there is very little that can be done.  You may be able to check this with some customer exit, but I do not normally use them.  Hopefully someone with customer exit knowledge can advise you in that area.
    Regards

  • Work Order Header Short Text & Operation Short Text Issue

    Hi All,
    There is one issue while creating the work Order through IW31. When I put the Header Short Text same short text is transpose in to the First Operation short text as per STD SAP behaviour but if I change First Operation short text in creation(IW31) and save and come back in IW32 or IW33 it is showing the same Header Short Text  but not changed one.
    Why it is so???
    I  Want to Edit the First Operation short text in IW31 only not in IW32.
    If anybody have explaination on this please let me know.Its SAP BUG????
    I am Using ECC6.0
    BR
    Rakesh

    Hello Pete,
    No i don't want same short text at Operation short text. Actually when i am in TC IW31 creating Order By default Header Short text is transfer to Operation Short text as per SAP STD functionality when at the same time i change the Operation short text and save and come back and see the Order in IW33 & IW32 i am not able see the changed Operation short text which i changed at  IW31 while creation of order.It showing the same short text of order Header .Why so.......????
    BR
    Rakesh

  • Purchase order history short text

    hi,
    may i know where i can get the short text at first column in purchase order history tab in me23n.
    for example DCGR, GR, DCIn, etc...
    thanks

    Hi
    Check in IMG - MM - purchasing - Statistics - purchase order history categories. Here you can find PO history details.
    Thanks

  • How to change the  short text in  a model service specification??

    Hi,
                I've tried changing a model service specification using the transaction code ML11 but couldnt change the  short text language from German to English.

    Hi
    One possibility is to Maintain the  languages in the Additional data tab  under description in the material master record for your Services . Please check wether both the languages are maintained or not . Please correct me if i am wrong .
    regards
    kp

  • How to change the Short text of a GUI Status .

    Hi Guys ,
       Can any one guide me on how to change the short text of an already existing GUI Status .
    I have already tried doing these :Opened the GUI Status in change mode and changed the short texts of the Application tool bar ,
                               Menu Bar ,
                               Function Keys ,
    thinking that this will update in the Short text .. but that didnt happen ...
    Below is what I need ...
    Requirement :
    GUI Status : Status_001 .
    Short Text :  New GUI Status .
    Change the Short Text to " Changed GUI Status ' . 
    Regards,
    Ranjita

    Hi Ranjita,
    Do this...
    go to SE80
    Open the program.. open node GUI Status
    Double click on the status you want to change
    go to menu GOTO>ATTRIBUTES>STATUS
    click on continue or simply enter
    Here change the short text and continue or enter
    activate it
    Hope this helps..
    Regards,
    Kinshuk

  • Hierarchy in selection screen shows Short Text, I want to change it to Med

    Hi
    It seems that the selection popup of Hier is using the Short Text of the Charc.
    Can I change it to use Med Text?
    I tried in the Query, it only changes the way the Hier is presented in the reort
    and not in the selection screen.
    Thanks
    Edan

    Hi Edan,
    You could select the type of text you want to display on selection screen by choosing the same under the Business Explorer tab of your Hierarchy infoObject.
    Go to RSA1 -> infoObject -> find your hierarchy infoObject -> Display -> Business Explorer tab ->
    Text type -> Medium-length text.
    Hope this helps!
    Regards,
    Saurabh

  • Impact of changing positions and Org Unit short text

    Hi All..
    This is regarding the impact  of changing positions and Org Unit short text(SAP name - Object Abbreviation, technical field u2013 hrp1000-short).The new approach we are ging to have is to keep short text same across the business unit.
    Example:
    All position in US will have short text u2013 USS
    Similarly All US Org Unit short text will be COMUS
    I was wondering, from SAP best practices point of view, do you see any downside in this approach?
    Example: Any problem in searching position or org using search term.
    Please pin your thoughts...
    Thanks,
    Kumar

    Hi,
    Normally such change will not have any impact in PA module.
    Only in exceptional cases it will have an impact in following cases:
    1. First and mandatory condition that you use abbreviation as position name in IT 0001. If this is the case parameter PLOGI TEXTC (in table T77S0) should be equal X.
    2. Second condition is that parameter PLOGI SPLIT is equal to X. That means that change of object name will lead to record split in IT 0001 in PA.
    So if in table T77S0 you don't have setting PLOGI TEXTC = X and PLOGI SPLIT = X you can go ahead with change of positions abbreviations. It will have no impact on other modules.
    Cheers!

  • Avoid users can change Short Text of Material Id in Purchase Requisitions

    Hi
    We have a problem with purchase requisitions.
    Users create a purchase requisition. In the field material,   type the ID of the Material but then, change the description in Short Text, for example Material 1000 is a Bearing, and the user can change this description for  Nut for example, causing problems and confusion in the following steps.
    We want that if the user use Material ID can´t change the Short Text
    Thank You  very much
    Sergio

    Hi,
    You can control this via tcode OLME. go to Purchase Requisitions and then 'Define Screen Layout at Document Level'.  Select appropriate field selection key (NBB if using standard one), go to basic data, item and maintain required settings.

  • IT1000 Short text change in Specific language

    Hello Folks,
    When i change the short text in one language and delimit for IT1000.Its delimiting in other langague also.
    Could please let me know how to avoid this problem of delimiting in other language also.
    Thanks,
    Nishanth

    Hello Sikindar  ,
    Record Before Delimition and change of IT1000 short text in "German Language"
    O         10002643   1          01.10.2004  31.12.9999 D
    O         10002643   1          01.10.2004  31.12.9999 E
    Record after Delimition and change of IT1000 short text in "German Language"
    O         10002643   1          01.10.2004  31.10.2004 D
    O         10002643   1          01.10.2004  31.10.2004 E
    O         10002643   1          01.11.2004  31.12.9999 D
    Above the problem is Record in EN also getting delimited.

  • Risks/Consequences Associated with changing short text in BS22

    Hi,
    I need to change the short text of some status of the TJ02T table  (i.e. I need to change the short description of status I0098 from CRT to CREA).
    Someone can tell me if there are risks or contraindications associated with this change in BS22?
    Thanks
    Elisa

    Elisa
    In my ECC6 system I0098 is already CRTE...
    My personal opinion is that this is a user-training issue and BS22 should stay standard..
    There is a user-exit which manipulates the text on the status in an object (order, notif, etc) without changing BS22.
    PeteA

  • Change PR item short text when created from Work Order

    Hello,
    Is there a way to edit the PR item short text when the PR is generated from a Work Order. When we open the PR, the item short text is grayed out.
    We have created Material Master Number for Contract/ BPA items. When we input that particular material number under the components tab on the WO then release it ,it creates a PR. The Material Master description gets transfered to the PR.
    Our issue is that the Material Master is to generic and we would like to change the description on the PR level.
    Is this possible?
    Thanks,

    Hi
    I think neither there is any way to change the Material Description in PR nor its a good SAP Practise as it is having lot of implecations of stocking , physical inventory , reconciliation etc .
    If Item codes are generic suggest if u can use the PR or PO long text to enable the buyer for the procurement & supplier for supply the material as per long text specifications .
    Regards
    Sameer

  • Posiiton short text change does not flow to IT0001

    Hi HCM gurus,
    We have a scenario where the position short text and long text can change pretty frequently. In this scenario, the new descriotion is not flowing to PA20/30 screens
    The position description that flows to PA20/30 screens seems to consider the 0001 begda as the date te be yused for reading hrp1000 infotype for this position.
    Am sure we cannot over ride this, but what is the Best practise in this case so that the HR admins see the most current Position description in PA 30/20
    regards
    Raj

    this is because of integration of PA - OM. activate the PM-OM switch from t77s0
    Plogi orga
    and also run the rhinte20/30 reports.
    Regards,
    Divya

  • Changes in short text in Purchase Requisition and Purchase Order

    Dear experts,
    Can you help me with the following issue:
    During creation of Purchase Requisition and Purchase Order with Account assignment category K-Cost center the field Short text to allow input of data in it.
    In all other cases During creation of Purchase Requisition and Purchase Order without Account assignment category K-Cost center the field Short text to be forbidden for input of data
    Is it possible?
    Thank you
    Regards

    Dear Vasil Pavlov ,
    This cannot be realize in sap standard system. You may want to write your own coding using
    ME_PROCESS_REQ and ME_PROCESS_PO for  purchase requisition and purchase order respectively.
    Best Regards,
    Loke Foong

  • Restriction of Change in Short Text in PR

    Dear Expert,
    We are using single PR type for generation purchase requisition for material as well service.
    In this, while making PR for material user has to select material code; while for making service PR user has to write short text and they are assigning Service code in service tab.
    Now problem is, in material PR user is selecting material code and write material description (manually).
    We want to restrict manual description in short text for material PR.
    Thanks in Advance..
    With Warm Regards,
    Dipen Shroff

    Hi,
    With same Doc type, you can't achieve your purpose, better to create 2 separate doc type for this purpose though you use same number range for your purpose, Also I think there should be no limitation for this, As a consultant you have to convince your client as per the requirement, also it is standard practice to have different doc. types for material & service.
    Do the configuration in SPRO -> Material Management -> Purchasing - > Purchase requisition -> Define Screen layout for documents, Select the field section groups which are relevant to your document types.
    Select the relevant field selection group, go to the detailed button. double click on basic data, item. In the screen which pops out, you can make Material description as a display field
    You can find the PR Document types from the below path,
    SPRO->Material Management -> Purchasing - > Purchase requisition -> Define document types.

Maybe you are looking for

  • DB polling : query with subquery

    Hi, We are upgrading the 10g code to 11g, where one process has the DB polling with custom SQQL. This SQL has a subquery like, Select Name, ID, CID from tabl1 where lastdate + (select num_value from table2 where column2 = "xxx") <= sysdate We want th

  • Why Does My MacBook Eject CD's When I Put It In Without Me Telling It To?

    I've had my MacBook for 3 years and lately it has been acting funny. Every time I try to put a CD in, it automatically ejects it. I have tried putting in different types of CD's (movies and software), so I know nothing is wrong with the CD. I really

  • GeneratedReceiverChannel_HTTP

    Hi people In file2file scenario i am activated IR object that's ok,  i will able to activate in ID part, in that part what ever i created that object's(CC & ID IR SA RA that activating) and also coming GeneratedReceiverChannel_HTTP this will not acti

  • Black Box Picture Quality

    Hi, Might be one of those strange moments but I am convinced my picture isnt as good on the new box. I remember watching reruns off Lost and was amazed at the quality,and no they werent HD. Iplayer as well seems strange. Anyone else notice a differen

  • Internet Data Connection Screwy on 701

    My Mobile Data connection only works IF i'm using an app that prompts me asking which connection I want to use. The default web browser, Opera Mini and Opera Mobile all give you that option so those appear to work ok.  But, Nokia Maps, Public Transpo