Show off

hi all
As the requirements starts coming like floods i have managed to to all
but i thinking to make some different look
As of now we have 7 tabs in our dashboard with different reports
and i have created 8th tab with some new reports but i want to show the user it as new
like it should blink or star shape in red color or like word (new) in red color
its like show off .. but would like to do
is that possible to do ...........help please

Hi no need to h1 - header tag, just do below
Goto Page Option -> Edit Dashboard -> in Dashboard Editor - Goto Dashboard Properties ->
then Click on Rename Optioin for your Tab, for Ex Home Page
In Name Section wirte the below HTML Code
[blink][font color=blue size=2]Home Page[font][blink]
Note: here change the open bracket [ to Lesthan symbol< and close bracket to ] to Greater than symbol>
Regards,
Balaa...

Similar Messages

WiSM Status LED 1 & Status LED 2 showing off. Is it normal?

Hi,
WiSM WLAN Service Module WS-SVC-WISM-1-K9 in 6509e running VSS IOs s72033-ipservicesk9_wan-mz.122-33.SXI2a.bin having trouble to get the IP from service-vlan DHCP also status LED 1 & Status LED 2 showing off.
The pertinent config is as follows.
vlan 300
name WiSM_Service_Vlan
interface Vlan300
description *** WiSM Service-Vlan
ip address 192.168.200.1 255.255.255.0
ip dhcp excluded-address 192.168.200.1
ip dhcp pool WiSM_Service-Vlan_300
   network 192.168.200.0 255.255.255.0
   default-router 192.168.200.1
wism service-vlan 300
vlan 183
name WiSM_Management
interface Vlan183
description *** WiSM Management Vlan ***
ip address 10.39.139.254 255.255.255.0
wism switch 1 module 4 controller 1 allowed-vlan 125,126,183,300
wism switch 1 module 4 controller 2 allowed-vlan 125,126,183,300
wism switch 2 module 4 controller 1 allowed-vlan 125,126,183,300
wism switch 2 module 4 controller 2 allowed-vlan 125,126,183,300
wism switch 1 module 4 controller 1 native-vlan 183
wism switch 1 module 4 controller 2 native-vlan 183
wism switch 2 module 4 controller 1 native-vlan 183
wism switch 2 module 4 controller 2 native-vlan 183
HO2NET0001#sh wism status
Service Vlan : 300, Service IP Subnet : 192.168.200.1/255.255.255.0
      WLAN
Slot Controller Service IP       Management IP    SW Version Status
----+-----------+----------------+----------------+-----------+---------------
20    1           0.0.0.0          0.0.0.0                      Service Port Up
20    2           0.0.0.0          0.0.0.0                      Service Port Up
HO2NET0001#sh module
Mod Ports Card Type                              Model              Serial No.
1    8 CEF720 8 port 10GE with DFC            WS-X6708-10GE      SAL13442Q5N
2    8 CEF720 8 port 10GE with DFC            WS-X6708-10GE      SAL13442GAL
3   48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX     SAL13410N8P
4   10 WiSM WLAN Service Module               WS-SVC-WISM-1-K9   SAD133101UY
5    5 Supervisor Engine 720 10GE (Active)    VS-S720-10G        SAL13442JE4
Mod MAC addresses                       Hw    Fw           Sw           Status
1 0025.84f1.55b8 to 0025.84f1.55bf   2.1   12.2(18r)S1 12.2(33)SXI2 Ok
2 0025.84f1.4e58 to 0025.84f1.4e5f   2.1   12.2(18r)S1 12.2(33)SXI2 Ok
3 0027.0da7.c240 to 0027.0da7.c26f   3.2   12.2(18r)S1 12.2(33)SXI2 Ok
4 0023.5e25.7168 to 0023.5e25.7177   2.3   12.2(14r)S5 12.2(33)SXI2 Ok
5 001f.9e2a.2608 to 001f.9e2a.260f   3.1   8.5(3)       12.2(33)SXI2 Ok
Mod Sub-Module                  Model              Serial       Hw     Status
1 Distributed Forwarding Card WS-F6700-DFC3C     SAL13442EG9 1.4    Ok
2 Distributed Forwarding Card WS-F6700-DFC3C     SAL13442H9T 1.4    Ok
3 Centralized Forwarding Card WS-F6700-CFC       SAL13442HU9 4.1    Ok
4 Centralized Forwarding Card WS-SVC-WISM-1-K9-D SAD133200D6 2.1    Ok
5 Policy Feature Card 3       VS-F6K-PFC3C       SAL13442E5S 1.1    Ok
5 MSFC3 Daughterboard         VS-F6K-MSFC3       SAL13421AJZ 2.0    Ok
Mod Online Diag Status
1 Pass
2 Pass
3 Pass
4 Pass
5 Pass
HO2NET0001#sh vlan
300 WiSM_Service_Vlan                active    Gi1/4/9, Gi1/4/10
The service IP is supposed to have been populated with an address from the dhcp pool. I am also unable to connect to access it by console as well as doing a session switch 1 slot 4 processor 1. I get the following upon attempting to do so:
Through Console.
It is giving following & then got stuck.
Bootloader 3.2.202.0 (Nov 13 2007 - 19:35:12)
Motorola PowerPC ProcessorID=00000000 Rev. PVR=80200020
        CPU: 999 MHz
        CCB: 333 MHz
        DDR: 166 MHz
        LBC: 41 MHz
L1 D-cache 32KB, L1 I-cache 32KB enabled.
I2C:   ready
DTT:   1 is 33 C
DRAM: DDR module detected, total size:512MB.
512 MB
8540 in PCI Host Mode.
8540 not PCI Arbiter.
Memory Test PASS
FLASH:
Flash Bank 0: portsize = 2, size = 8 MB in 142 Sectors
8 MB
L2 cache enabled: 256KB
Card Id: 1537
Card Revision Id: 1
Card CPU Id: 1287
Number of MAC Addresses: 32
Number of Slots Supported: 4
Serial Number: FAM133200D6
Manufacturers ID: 30464
Board Maintenance Level: 00
In:    serial
Out:   serial
Err:   serial
                      .o88b. d888888b .d8888. .o88b. .d88b.
                     d8P Y8   `88'   88' YP d8P Y8 .8P Y8.
                     8P         88    `8bo.   8P      88    88
                     8b         88      `Y8b. 8b      88    88
                     Y8b d8   .88.   db   8D Y8b d8 `8b d8'
                      `Y88P' Y888888P `8888Y' `Y88P' `Y88P'
                    Model SVC-WiSM   S/N: FAM133200D6
Net:   TSEC ETHERNET
IDE:   Bus 0: OK
Device 0: Model: STI Flash 8.0.0 Firm: 01/17/07 Ser#: STI1MMJ109198093647
            Type: Removable Hard Disk
            Capacity: 488.7 MB = 0.4 GB (1000944 x 512)
Device 1: not available
Booting Primary Image...
Press <ESC> now for additional boot options...
Detecting Hardware . . .
Cryptographic library self-test....passed!
XML config selected
Validating XML configuration
Cisco is a trademark of Cisco Systems, Inc.
Software Copyright Cisco Systems, Inc. All rights reserved.
Cisco AireOS Version 5.2.178.0
Initializing OS Services: ok
Initializing Serial Services: ok
Initializing Internal Interfaces: ok
Initializing Network Services: ok
Initializing Licensing Services: ok
Starting ARP Services: ok
Starting Trap Manager: ok
Starting Network Interface Management Services: ok
Starting System Services: ok
Starting FIPS Features: ok : Not enabled
Starting Fast Path Hardware Acceleration: ok
Starting Switching Services: ok
Starting QoS Services: ok
Starting Policy Manager: ok
Starting Data Transport Link Layer: ok
Starting Access Control List Services: ok
Starting System Interfaces: ok
Starting Client Troubleshooting Service: ok
Starting Management Frame Protection: ok
Starting LWAPP: ok
Starting CAPWAP: ok
Starting Certificate Database: ok
Starting VPN Services: ok
Starting Security Services: ok
Starting Policy Manager: ok
Starting Authentication Engine: ok
Starting Mobility Management: ok
Starting LOCP: ok
Starting Virtual AP Services: ok
Starting AireWave Director: ok
Starting Network Time Services: ok
Starting Cisco Discovery Protocol: ok
Starting Broadcast Services: ok
Starting Logging Services: ok
Starting DHCP Server: ok
Starting IDS Signature Manager: ok
Starting RFID Tag Tracking: ok
Starting WLAN Control Protocol (WCP): ok
Starting Mesh Services: ok
Starting TSM: ok
Starting CIDS Services: ok
Starting Ethernet-over-IP: ok
Starting DTLS server: enabled in CAPWAP
Starting FMC HS: ok
Starting WIPS: ok
Starting SSHPM LSC PROV LIST: ok
Starting Management Services:
   Web Server: ok
   CLI: ok
   Secure Web: Web Authentication Certificate not found (error). If you cannot access management interface via HTTPS please reconfigure Virtual Interface.
(Cisco Controller)
Welcome to the Cisco Wizard Configuration Tool
Use the '-' character to backup
Would you like to terminate autoinstall? [yes]:
AUTO-INSTALL: starting now...
Through Session
HO2NET0001##session switch 1 slot 4 proc 1
The default escape character is Ctrl-^, then x. You can also type 'exit' at the remote prompt to end the session Trying 0.0.0.0 ...
Any assistance or ideas offered will be greatly appreciated.
Thanks,

Hi Tabish,
How many times do you have to open this same topic?
In my opinion, this is your THIRD thread for the same topic.

Sony Bravia showing off Front Row is it real or rigged?

That's a Sony Bravia kdlv40a12u showing off Front Row on the new Mini's marketing pages (see link below). I know because I've got that model (there's a possibility it's the TV's smaller 32-inch sibling).
http://www.apple.com/macmini/frontrow.html
After my new Mini (duo) is done with its world courier tour I am hoping I'll just be able to plug it in (DVI to HDMI since there's no VGA socket on the TV anyway) and it'll work just as well the one on the Mini's marketing pages APPEARS to be working. BUT having read all of traffic about the difficulties people are having getting their HDTVs to plug and play nice out of the box, I am beginning to wonder. I read some of the press reports of the Intel Mini's launch and it was reported that Stevie's boys and girls were using the Bravia to show off the Mini in one or the "rooms". If anybody has successfully plugged and played with this combination, please post reassuance. If you've had to tweak with Displayconfigx or SwitchRes, please can you post your timings. If non of the above, I'll let you know how I get on. I have to admit to a sinking feeling since I did try with a PPC Mini and gave up after hours and hours of borrowing and guessing Displayconfigx settings.
Thanks
G5 and Power Book G4 Mac OS X (10.4.5) Lots of other bits

Why couldn't it be the 26" model?
You should be fine - DVI to HDMI is simply a pin
format change - the signals are preserved so nothing
more expensive than some copper is needed for that
cable to work (That being said, some of the list
prices are staggering for DVI-HDMI cables)
Could be the 26". I was going by the size of the Mini next to it. Apparently SJ thinks they look "nice".
I've tested the 26" XBR model with a new intel mini -
works out of the box. (Other than turning off the
overscan which was enabled by default - I prefer to
see my dock and menu bar rather than have video fill
every pixel...)
Thanks for input (no pun intended given we are talking about DVI to HDMI!). The Mini is now in the Netherlands, so it's getting closer all the time. When it arrives I'll plug it in and let readers of this thread how it goes, looks etc. I too am not fanatical about filling every last pixel as long as those that are used are giving their all in terms of clarity.
Cheers

How do I record tv shows off my HDTV to my macbook?

Is there a particular app that I can use to record tv shows off my HDTV? I don't think I can use iMovie because the highest OS X my macbook supports is lion (7, not mountain lion 8). My Macbook is from early 2008 and the model number is a1181.

Unless you have a very unusual TV it is not sending out anything that your MacBook can take in. What you want is to get the TV signal at its source, such as your cable TV box and send that to your MacBook. You would need something like ElGato's EyeTV HD for this.
Best of luck.

Simultaneous call seems to be on even though it shows off

Hi,
I have a client where the simultaneous call is in effect. But when I check the user's call forwarding setting it shows off. Does anyone know of a way to fix it or if you are more technical can you perhaps point me to the database table where these entries
are kept.
Thanks,

Hi,
Would you please elaborate your environment (have HLB or not)?
please try to enable simultaneous and enter other number. Then turn off it to check if this this it works.
Please try to disable the user and then enable it again.
If you deploy HLB for FE Pool, please try to create a new cookie persistence profile based on the default cookie persistence profile, and then test the issue again.
Here is a similar case may help you:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/c454357c-9804-4965-bef4-504677de265e/simultaneous-ring-lync-mobility-double-sip-invite?forum=ocsmobility
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

TS3276 all accounts show off line how to get them online

all e-mail accounts show off line how to get them online to send e-emai

Troubleshooting Apple Mail
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages

Why is my iPhone camera not as good as the one showed off by Steve Jobs?

In the WWDC 2010, Apple's CEO Steve Jobs showed off the iPhone 4's 5MP camera. But mine is not that great, I get a lot of camera noise and the digital zoom *****, the video capture has a lot of noise too. What's up? Is my iPhone messed up Or are all iPhone 4 cameras like this?

neeraj_96 wrote:
In the WWDC 2010, Apple's CEO Steve Jobs showed off the iPhone 4's 5MP camera. But mine is not that great, I get a lot of camera noise and the digital zoom *****, the video capture has a lot of noise too. What's up? Is my iPhone messed up Or are all iPhone 4 cameras like this?
You are probably trying to take pictures outside of the lighting conditions that are optimal for the phone. Camera noise is almost always a sign of insufficient light.
And digital zoom is a hoax on the inexperienced photographer. All it does is use less of the sensor, so it is the same effect as cropping the photo on your computer after taking it. This is true of any digital camera, not just the iPhone's.

I tried to download a tv show off iTunes on my iPad and it keeps saying I can't download it at this time. But I've paid for it already, how can I fix it?

I tried to download a tv show off iTunes on my iPad and it keeps saying I can't download it at this time. But I've paid for it already, how can I fix it?

Try to sign out of iTunes and sign back in, that usually fixes authentication problems.

I downloaded some tv shows off of itunes but im having a hard time backing them up to my icloud. what am i doing wrong

i downloaded some tv shows off of itunes but im having a hard time backing them up to my icloud. what am i doing wrong

If you purchased them from the iTuens store, they are already in iCloud. All you would need to do is delete them from your device and you can redownload them again from iCloud in the future.

Can i purchase a tv show off another itunes store

can i purchase a tv show off another itunes store

You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country...

Anime Search and Show Off

Hey guys
Ok basically. ive been searching for so long for awsome anime desktop themes. not just wallpapers, wallpapers are easy enough, ok for example, windows 7 has and XP had a tone of catered anime theme's by users and enthusiasts
But i cant find one Desktop Environement with specifically Anime Built entire themes, that cover the windows, bars, X and - buttons, etc
only one i ever found was a login splash for gnome
So im very curious if anyone in the arch community has put together any custom anime theme's preferably for openbox or XFCE. so if you have one show it off!, id love to see some anime based Desktops boys and girls!
also if you post an anime desktop screenshot, please menchone what the DE/WM/panels are.
<3
let the anime show off begin!

http://gnome-look.org/content/show.php/ … ent=114280
Just for the record.

Bitmap show off in 100% scaled flash

Hello.
My problem is that i have a swf scaled 100% from the html
code but when that swf loads into a targeted movie clip a swf with
a bitmap image (in this case a png high quality smooth
breaked ) the image shows off rather messy.
I know the about the resolution dependency of bitmaps in
flash but still is there any other solution not to show images so
messy in 100% scaled stage?
Thanks Chryssa

Hey jabberwock...
Keep up the good work with your tutorials. You've always loved the Flash stuff, I know. I find Flash stuff pretty snazzy, too! I mostly like the photo album stuff rather than straight animations, though I'd like to start getting more into flash audio. I want to do away with as many QuickTime dependencies as possible, since it seems that most of my PC friends can't seem to bring themselves to install QuickTime for some reason. I imagine this represents a fair cross-section of PC users, too.
Anyways, I put up a slideshow for you...
http://www.dirtdoog.com
http://web.mac.com/jwtseng
Check out the "Goofy Slideshow"

I would just like to ask apple if they can make ios 7 for ipod 4th gen because my friends are showing off the new ios 7 with there ipod 5 or iphone

i would just like to ask apple if they can make ios 7 for ipod 4th gen because my friends are showing off the new ios 7 with there ipod 5 or iphone

No. The hardware in the fourth-gen iPod touch won't handle iOS 7 or Apple would have released it for your model of iPod. If you want to run iOS 7, you'll need a new iPod.
Regards.

HP Officejet Pro 850 showing off line when it is turned on and plugged in.

Ungh, it has been weeks now and this printer has just stopped working and is showing OFFLINE. It was plugged into the back of the computer all year and worked fine and it just stopped printing so we plugged it into the USB port at the front of the computer and it worked for a while and now no matter where we plug it in, we can see it there in the devices and printers but it is greyed out. You can make it default no problem but it just will not print. We have downloaded the driver off the site over and over, uinstalled it over and over, when you select a document to print you can send the print to the printer, you can see it listed there but it just does not print. I just went to the HP site and downloaded some kind of printing wizard assisstant or something and it sent a test page to the printer and it worked but this computer for whatever reason it gives me the message every time we try and print "Printer off line" Anyone have any suggestions? Very frustrating. Thanks! Mike

Hi Mike-lake,You may find this document helpful. It covers a number of situations with the printer showing "offline" and walks through fixing this. http://support.hp.com/us-en/product/HP-Officejet-2620-All-in-One-Printer-series/5357283/model/5385219/document/c04249080Please let me know if this corrects the issue for you!Jean

My HP Officejet 6500 E710 is on, but my PC shows off. How do I solve this issue?

My computer shows my printer is off, I am using wireless. However, my printer is on, and I did not find my device in th printer. When I want to print or scan, sometimes it works but somtimes it doesn't. How do I sovle this problem?

Hello @Kelly45!
Thank you for posting on the HP Forums!
I can see your printer is showing offline when it is in fact online. The first thing I suggest is to remove the power from the printer and the router and restart the computer. After 20 seconds plug the router and printer back in and see if you still experience the issue. I also suggest moving the router or printer so they are 5-10 feet apart. Too close and too far away may cause odd connection issues. You will also want to ensure the router is not next to speakers or a TV. Other electronics can effect Wi-Fi signal as well.
If you are still experiencing the issue then it may be software related. I recommend uninstalling the HP software. After the uninstall is complete it would be a good idea to perform a disk cleanup in the computer. A disk cleanup will improve computer performance and clear temporary files that may cause issues during the install of software. Once the disk cleanup is complete you should restart the computer and re-install the HP software.
To uninstall HP software click here: Uninstalling HP Software
To perform a disk cleanup click here: Performing a Disk Cleanup
To download the HP software click here: HP Software and Driver (Click "Download" next to HP Officejet Full Feature Software and Driver)
Please post back and let me know how it goes!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Show off

Similar Messages

Maybe you are looking for