SLD - Register TREX

Hello,
I want to register our TREX-System in SLD of Solution Manager.
I've read, that it is not necessary to do it manually, as there should be a kind of data supplier for this.
But can I find this?
We are using TREX on Windows.
Thank you

Sorry, the guide is for linux, but shoul be the same on Windows ( of course, you should change the PATH ).
Anyway,
On solution manager:
sldreg -configure slddest.cfg –usekeyfile
Copy the file on TREX, change permission and execute like daaadm user
On TREX
/usr/sap/hostctrl/exe/saposcol -b | sldreg -connectfile slddest.cfg -stdin –oldtransferdtd
After some minute you can check in
http://FQNDnameofsolution:8000/sld
Administrator >> Content Maintenance
daaadm user is created during installation.
My only doubt is where is in windows the file saposcol
regards
Antonietta

Similar Messages

SLD registration for TREX not working...

SDN Members,
I am unable to register TREX in SLD. I have put in an OSS message; however, I have yet to receive a response back from SAP... So any help would be much appreciated.
Thanks,
-Patrick
Steps for the Reconstruction
1. Generate SLD Configuration file:
sldreg -configure /usr/sap/TXD/TRX85/slddest.cfg
2. Copy the SLD Config. File to the Global SLD Directory and run
command (to transfer data to SLD):
saposcol -b | sldreg -connectfile slddest.cfg -stdin -oldtransferdtd
Receive the following:
(hostnames, ip's, and ports altered to protect the innocent)
prtdiag can only be run in the global zone
Thu Dec 27 10:33:04 2007 SLD Registration Program [2.0] (May 8 2006) [None Unicode]
Thu Dec 27 10:33:04 2007 No XML data input file set. Will read input data from standard input.
Thu Dec 27 10:33:04 2007 Supplier Name: ComputerSystem / Supplier Version: 1.0 / Supplier Vendor: / CIM Model Version: 1.3.21
Thu Dec 27 10:33:04 2007 Group:
Thu Dec 27 10:33:04 2007 Group name system1
Thu Dec 27 10:33:04 2007 validateAttributes OK
Thu Dec 27 10:33:04 2007 Property Status
Thu Dec 27 10:33:04 2007 Value OK
Thu Dec 27 10:33:04 2007 Property NameFormat
Thu Dec 27 10:33:04 2007 Value IP
Thu Dec 27 10:33:04 2007 Property Caption
Thu Dec 27 10:33:04 2007 Value hostname01
Thu Dec 27 10:33:04 2007 Property Name
Thu Dec 27 10:33:04 2007 Value usahstxutxd01
Thu Dec 27 10:33:04 2007 Property IPAddress
Thu Dec 27 10:33:04 2007 Value X.X.X.X
Thu Dec 27 10:33:04 2007 Property OpSysReleaseName
Thu Dec 27 10:33:04 2007 Value SunOS
Thu Dec 27 10:33:04 2007 Property OpSysCategory
Thu Dec 27 10:33:04 2007 Value Solaris
Thu Dec 27 10:33:04 2007 Property VendorRelease
Thu Dec 27 10:33:04 2007 Value SunOS 5.10
Thu Dec 27 10:33:04 2007 Property CPUType
Thu Dec 27 10:33:04 2007 Value sun4v
Thu Dec 27 10:33:04 2007 Property MachineCategory
Thu Dec 27 10:33:04 2007 Value SPARC
Thu Dec 27 10:33:04 2007 Property OpSysBits
Thu Dec 27 10:33:04 2007 Value 64
Thu Dec 27 10:33:04 2007 Property NumberOfCPUs
Thu Dec 27 10:33:04 2007 Value 32
Thu Dec 27 10:33:04 2007 Property CPURate
Thu Dec 27 10:33:04 2007 Value 1200
Thu Dec 27 10:33:04 2007 Property PhysicalRAMInMB
Thu Dec 27 10:33:04 2007 Value 65528
Thu Dec 27 10:33:04 2007 Property VirtualRAMInMB
Thu Dec 27 10:33:04 2007 Value 87224
Thu Dec 27 10:33:04 2007 Using connect file 'slddest.cfg'.
Thu Dec 27 10:33:04 2007 No key file 'slddest.cfg.key' used.
Thu Dec 27 10:33:04 2007 HTTP trace: false
Thu Dec 27 10:33:04 2007 Data trace: false
Thu Dec 27 10:33:04 2007 Using connect file 'slddest.cfg'.
Thu Dec 27 10:33:04 2007 No key file 'slddest.cfg.key' used.
Thu Dec 27 10:33:04 2007 *** Start SLD Registration ***
Thu Dec 27 10:33:04 2007 Used URL: http://hostname01:50000/sld/ds
Thu Dec 27 10:33:04 2007 HTTP open status: true - NI RC=1
Thu Dec 27 10:33:04 2007 HTTP send successful.
Thu Dec 27 10:33:04 2007 Return code: 401 --- Return message: (Unauthorized)
Thu Dec 27 10:33:04 2007 HTTP response: Failure. HTTP status code: 401
Thu Dec 27 10:33:04 2007 *** End SLD Registration ***
Thu Dec 27 10:33:04 2007 Data send status: false
Consequently SLD is not updated with TREX information. Using IE I can go to
the url http://hostname01:50000/sld/ds , get popup asking for
credentials (we log in using SLDDSUSER account - w/ Basis Admin level
auth.), and we receive: Page Cannot be displayed (HTTP 400 - Bad Request
Internet Explorer ).
If we go to http://hostname01:50000/sld and login with the same
account (SLDDSUSER) we see the full SLD Toolset.
Edited by: Patrick Riggins on Dec 27, 2007 6:06 PM

UPDATE:
We were able to work through and
resolve the error we initially posted in this Thread. Now we run sldreg
and all looks good; however, we are seeing nothing in SLD (on our XI
System) even after stop/restart of SLD Server:
Steps for the Reconstruction
1. Generate SLD Configuration Files:
sldreg -usekeyfile -configure /usr/sap/TXD/TRX00/slddest.cfg
2. Copied files to Global SLD
/sapmnt/TXD/global
3. Run command to transfer data to SLD:
saposcol -b | sldreg -user <user acct> -pass <password> -host
<hostname> -port <port #> -datatrace -httptrace -
logfile /usr/sap/TXD/TRX00/sld_reg.log -stdin
Looks successful:
Thu Dec 27 20:31:06 2007 HTTP body length: 0 --- HTTP body: empty
Thu Dec 27 20:31:06 2007 Return code: 200 --- Return message: (OK)
Thu Dec 27 20:31:06 2007 HTTP response: Success. HTTP status code: 200
Thu Dec 27 20:31:06 2007 *** End SLD Registration ***
Thu Dec 27 20:31:06 2007 Data send status: true
However in SLD , under content maintenance selecting "All With
Instances" in the dropdown list and "Class" , no TREX Services showing.
And no technical system showing for TXD (TREX System)

Registration of TREX in the sld not working

HI all,
I need configuration the TREX for complete instalation of xPD, but the registration on sld of trex no working, However However, I follow in the footsteps of the note 998708 and not working
Any suggestions to solve the problem?
Thank you

It's the multicolored arrow in the bottom right. It has worked before today with no problems. I don't know why it just suddenly stopped working.

RCA Setup for TREX System

Hello All,
Can you guide how to do the RCA Setup for TREX System?
Thanks in advance.

Hi Rahul,
I would suggest to go through http://service.sap.com/diagnostics -> SolMan in Detail -> E2E Root Cause Analysis + Media Library
All the required documentation is available. A brief overview of steps would be:
- Registering TREX/BWA onto the SLD
- Model the TREX/BWA in the SMSY
- Diagnsotics agent setup on the TREX host
- Proceed with RCA activities.
Regards,
Srikishan

Configure SLD during the Installtion

I am installing the XI and EP system with NetWeaver 04s. At the moment, I am at step "Cental SLD", pretty much the beginning of the installtion. It says that I have to enter my SLD configuration.
I have the option between:
- Configure local SLD
- Register in existing central SLD.
I am assuming that I have to have installed an SLD upfront. Is that true??? If yes, how can I install the SLD before the installtion routine?
Which option should I choose??
Thanks.
Regards
Go:khan

Enc
Go through the Urls and configure your SLD. If you do face problem post it back here.
Re: Central SLD Configuration.
Re: SLD configuration/move
---Mohan

Installing ECC 6.0, XI not full in place Option for SLD

We r Installing ECC 6.0, and we dont have XI fully installed in place and also another ECC 6.0 in place.
While installing ECC 6.0, it gives 3 options reg the SLD configuration as :
> No SLD destination
> Configure a local SLD
> Register in the Central SLD
Which one should I select.
If i select the first option (No SLD destination), in the future can I change it to the last one.
-Naveen.

Hello Naveen,
The first one is telling that u r not using the SLD in u r landscape
The second one is telling that U r about to configure the Local SLD on u r current installation only...
The third thing tell us that if there is already configured SLD in u r previous system and u want to use that SLD for u r current installation then u have to redirect the configuration parameter to the existing SLD only...
AS for example...
In my system previuosly i have one DEV system installed with SLD configuration...after ward i had installed the PRD system and at the time of installation by mistakenly i had installed a new SLD over there in PRD also.....
but after some time as of requriement i have to make only one SLD between DEV & PRD system so later on i will redirect the PRD SLD to DEV SLD...
so after installation u can change/reconfigure u r SLD also...
if you want the steps for the same then let me know..
if this information is usefull to u then please give points..
thanks

TREX 7.0 Problem

Hi friends,
i m working in portal7.0 and i want to configure TREX 7 in my portal,
i have a document,how to install it,but u want to know that TREX host name must be same as Portal host name???? or it should be different????
few days ago i installed TREX with same name as Portal host name,and i configure all the things,like
1.i configured visual administrator TREX service.
2.i created index
3.TREX monitor shows all the green status.
but when i search any document,search result is Null,it could not find any document,even though there are many document in it.
and index which i created it show RED status before search,
it show GREEN status.
then i find few forums and i check 1 link like
http://XXX:30205/TREXHttpServer/TREXISAPIExt.dll
it gives me some <error code:XXXX > </error> then
i find one forum that show that u should bypass ur proxy..and i done that.but when i restart my portal,my portal does not start
even it show all the services green.when i open my portal link PAGE CAN NOT B AVAILABLE occur.i restore my backup,now i do not want to take any risk,please any1 help me..

Hi Vipul
Trex is a search engine that you need to install and also need to register trex with portal to search KM documents from portal.
To register TREX hosts with the Portal, you have to first locate the name server and port of the TREX Installation. This is located in sapmsg.ini. You have to then set up the TREX name server in the J2EE Engine with the Visual Administrator.
To locate the name server and port
.Log on to the server as an Administrator .
.Navigate to the installation folder of TREX (that is C:\usr\sap\trex_00).
.Double-click sapprofile.ini to open the file in Notepad.
.Make a note of the port number. The default is 30001.
.You will need to enter this port number to the J2EE Visual Administrator in a later step.
Trex/Nameserver/Port=30001
To set up the TREX name server in the J2EE Engine
.Open Windows Explorer in the server.
.Navigate to J2EE Admin installation directory (that is C:\usr\sapSID\JC##\j2ee\admin).
.Double-click go.bat to start the J2EE Visual Administrator.
.Log on to Visual Administrator.
.Choose Global Configuration u00E0 Services u00E0 TREX Service.
.Select the nameserver.address properties field.
.Enter the server name of the TREX instance and the port number.
Choose Update.
Choose Save
.Select yes to restart the TREX Service.
To exit the J2EE Visual Administrator, choose Close u00E0 Exit.
Check the connection to the Enterprise Portal
Log on to the Enterprise Portal with super-administrator permissions.
Choose System Administration u00E0 Monitoring u00E0 Knowledge Management u00E0 TREX Monitor u00E0 Server Status.
You should see the status of the HTTP Server, Name Server, Queue Server, and Index Server is Available.
For Connecting TREX to Remote System
u00B7 The TREX admin tool and the remote system have the same TREX release.
u00B7 The TREX admin tool can reach the remote system via the network.
u00B7 You know the user name and password for the remote system.
Refer for complete detail;;
[http://help.sap.com/saphelp_nw70/helpdata/EN/40/83505303bd5616e10000000a114cbd/content.htm]
Thanks...

Trex developer work after the completion of basis work

Hi,
   After trex installation, i mean completion of basis person work.
what r the responsibilites of trex developer.
how to to that work
regards,
kakshayini

After Trex Installation u need to Register Trex with portal
Registering TREX Hosts with the Portal:
To register TREX hosts with the Portal, you have to first locate the name server and port of the TREX Installation. This is located in sapmsg.ini. You have to then set up the TREX name server in the J2EE Engine with the Visual Administrator.
Procedure
To locate the name server and port
Log on to the server with Administrator privileges.
Navigate to the installation folder of TREX (that is C:\usr\sap\trex_00).
Double-click sapprofile.ini to open the file in Notepad.
Make a note of the port number. The default is 30001. You will need to enter this port number to the J2EE Visual Administrator in a later step.
Trex/Nameserver/Port=30001
To set up the TREX name server in the J2EE Engine
Open Windows Explorer in the server.
Navigate to J2EE Admin installation directory (that is C:\usr\sap[SID]\JC##\j2ee\admin).
Double-click go.bat to start the J2EE Visual Administrator.
Log on to the Visual Administrator.
Choose Global Configuration u00E0 Services u00E0 TREX Service.
Select the nameserver.address properties field.
Enter the server name of the TREX instance and the port number.
Choose Update.
Choose Save
Select yes to restart the TREX Service.
To exit the J2EE Visual Administrator, choose Close u00E0 Exit.
Check the connection to the Enterprise Portal
Log on to the Enterprise Portal with super-administrator permissions.
     Choose System Administration u00E0 Monitoring u00E0 Knowledge Management u00E0 TREX Monitor u00E0 Server Status.
     You should see the status of the HTTP Server, Name Server, Queue Server, and Index Server is Available.

The comunication between SLD and SAP systems.

Hi!
Here is a statement from SAP official document:
By copying the files slddest.cfg and slddest.cfg.key, you have configured TREX for integration in the System Landscape Directory (SLD).
TREX checks every five minutes whether anything has changed in the TREX system landscape and reports any changes automatically to the SLD server. If nothing has changed, TREX reports every twelve hours to the SLD server. This allows you to see that this landscape is still active.
I wonder whether all other SAP systems communicate with SLD in the same fashion as above? If NOT , what is different?
Thanks for clarification.

Hi,
This is how it exchanges data with ABAP and JAVA based systems -
"JCo RFC Provider for accessing SLD data from ABAP-based systems. SLD has a built-in API for Java-based systems that requires no manual configuration for JAVA based systems"
Reg, DIbya

Entry using connection AFW failed

Hi,
I am trying to read an external file and push it in to R/3 by calling RFC using XI.
I configured everything.
File and RFC adapters are working fine.
After processing as per settings it is deleting the file but it is not pushing in to R/3.
In the Audit log i am getting the following messsages:
1.Success>Send binary file "tom.xml" from FTP server "entegdt27:XIshared", size 140 bytes with QoS EO
2.Success>Application attempting to send an XI message asynchronously using connection AFW.
3.Success>Trying to put the message into the send queue.
4.Success>Message successfully put into the queue.
5.Success>The application sent the message asynchronously using connection AFW. Returning to application.
6.Success>The message was successfully retrieved from the send queue.
7.Success>File "tom.xml" deleted after processing
8.Success>The message status set to DLNG.
9.Error>Transmitting the message to endpoint http://entegdt27:8000/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500..
10.Success>The asynchronous message was successfully scheduled to be delivered at Tue Dec 06 09:39:01 IST 2005.
During retry the same error(9) is repeating.
Can Anyone Help.
Thanks in Advance

Hi Chemmam,
       The file adapter is picking up the file and deleting the same.The problem should be in mapping or the receiver adapter configuration.
Check the following things.
        1.In design time(repository) check whether the mapping between the two data types are perfect.Check the same by using test tab and execute option.
        2.Then go to the reciver SAP r/3 business system and go to transaction SM59.Check whether the a connection is established between the receiver system and the Intergration server.
          Create connections by giving the log on parameters of the XI server and the program ID and test the connection.
        3.If the test connection is perfect , then go to receiver R3 system and try executing the RFC as stand alone by giving appropriate inputs.
        4.If that is working fine.Then check for your configuration settings.The Comunication channel between XI and Receiver SAP R/3 should be under the SLD registered business system while the sender communication channel(File adapter) should be under a service.
         5.In receiver communication channel check for the log on parameters of the receiver SAP system.
      Hop this helps you in locating the root cause.
regards,
aravindh.

Enabling of collaboration launch pad

Hi All,
I have recently installed portal and knowledge management
I need to enable the collaboration launch pad and also the search box in the Tools Area of the portal inorder to search data repositories
Can anyone tell me the procedure how to enable these two things in the portal
Thanks in advance

Hi rev,
To enable Collaboration Launch Pad you have to
1Select the Tool Area iView checkbox.
2.Choose Open. The Property Editor page displays.
3.Choose Show All in the Property Category drop list menu.
4.Choose Enable Collaboration Lauch Pad properties.
5.Select Yes radio button.
6.Choose Save
7.Choose Close.
8.Choose F5 to refresh your portal screen.
To activate the RTC Session Manager, perform the following steps:
1Go to the default framework page.
Enterprise Portal     Portal Content u00AE Portal Users u00AE Standard Portal Users u00AE Default Framework Page.
2Double-click Default Framework Page.
3Select the Tool Area iView checkbox and choose Open.
4Choose Show All in the Property Editor drop list menu.
5Expand the Enable Real-Time Collaboration properties.
6Select Yes radio button.
7Choose Save.
8Choose Close.
9Choose F5 to refresh your portal screen.
To Enable searching you have to install Trex. Below are the steps to register Trex with portal.
To register TREX hosts with the Portal, you have to first locate the name server and port of the TREX Installation. This is located in sapmsg.ini. You have to then set up the TREX name server in the J2EE Engine with the Visual Administrator.
Procedure
To locate the name server and port
1.     Log on to the server with Administrator privileges.
2.     Navigate to the installation folder of TREX (that is C:\usr\sap\trex_00\).
3.     Double-click sapprofile.ini to open the file in Notepad.
4.     Make a note of the port number. The default is 30001. You will need to enter this port number to the J2EE Visual Administrator in a later step.
To set up the TREX name server in the J2EE Engine
1.     Open Windows Explorer in the server.
2.     Navigate to J2EE Admin installation directory (that is C:\usr\sap\[SID]\JC##\j2ee\admin).
3.     Double-click go.bat to start the J2EE Visual Administrator.
4.     Log on to the Visual Administrator.
5.     Choose Global Configuration  Services  TREX Service.
6.     Select the nameserver.address properties field.
7.     Enter the server name of the TREX instance and the port number.
8.     Choose Update.
9.     Choose the Save button.
10.     Select Yes to restart the TREX Service.
11.     To exit the J2EE Visual Administrator, choose Close  Exit.
Check the connection to the Enterprise Portal
1.     Log on to the Enterprise Portal with super-administrator permissions.
2.     Choose System Administration  Monitoring  Knowledge Management  TREX Monitor  Server Status.
You should see the status of the HTTP Server, Name Server, Queue Server, and Index Server is Available.
Regards
Parth
**Points will be welcomed**

Domain Integration

Hi,
We have three tier architecture (ECC 5.0) with Oracle database. As the merger of the group of companies we are doing a Domain Integration and which helps all the group of companies will come under one domain.
On this regards will have to move all our SAP systems to new domain.
We require information as
What are the adverse effects?
What are the key things needs to consider?
How smoothly we can incorporate the domain integration?
In case if you have any information or any SAP notes then please reply us.
Regards,
JP.

Hello Thava
The XI components have not successfully registered in the SLD. Apply note #764176 Error in XI due to inconsistent SLD contents. If you stil have issues, search the forum for similar cases of "XI sld register" e.g. Adapter Engine no register in SLD..
Regards
Mark

Domain, Integration Server and Intergration Directory is missing

Hi experts,
After system copy, I cant find the Domain, Integration Server and Intergration Directory for the new system in the Exchange Infrastructure. The source system and target system is using the same SLD.
Thanks.
Regards,
Thava

Hello Thava
The XI components have not successfully registered in the SLD. Apply note #764176 Error in XI due to inconsistent SLD contents. If you stil have issues, search the forum for similar cases of "XI sld register" e.g. Adapter Engine no register in SLD..
Regards
Mark

Configuring TREX for sld

hello to all.
Why do i need to do the post installtion of the trex ""Configuring TREX" for sld"?
I have to do it?
Thanks
Menashe

If you are installing any component of 'NetWeaver', you should register it with Central SLD server of your landscape.
Same case with Trex too, that's why you have that post installation step there. However, it is not a 'Mandatory' step which needs to be done immediately after installation. But in future, you might require this. So you may proceed to do it after proper understanding of what is an 'SLD' even !
This step itself tells it's purpose as seen from below help page
http://help.sap.com/saphelp_nwpi711/helpdata/en/42/e33ae230ba3ee2e10000000a1553f6/content.htm
Following link will help you in understanding the SLD
https://www.sdn.sap.com/irj/sdn/nw-sld

Issue in registering ABAP stack into SLD

Hi all
The issue is as shown below. I appreciate your help.
Environment: SLD host-Windows Server 2003, Oracle 10g, WAS JAVA 640 SP19
CRM ABAP+JAVA 640 host - unix, Oracle
I was able to register CRM JAVA stack in SLD from Visual Administrator>SLD Data Supplier. The CIM Client Test was successfull.
When i try to register the CRM ABAP stack from tcode RZ70, i get an error as below:
SLD DS start program
    0: sapsrm_CRM_05                             : Execute program: SLDAPPL_SERV
    0: sapsrm_CRM_05                             : Execute program: SLDBCSYS
    0: sapsrm_CRM_05                             : Execute program: SLDCLIENT
    0: sapsrm_CRM_05                             : Execute program: SLDCOMPSYS
    0: sapsrm_CRM_05                             : Execute program: SLDDBSYS
    0: sapsrm_CRM_05                             : Execute program: SLDGWSRV
    0: sapsrm_CRM_05                             : Execute program: SLDINSTSC
    0: sapsrm_CRM_05                             : Execute program: SLDINSTSP
    0: sapsrm_CRM_05                             : Execute program: SLDIPSERV
    0: sapsrm_CRM_05                             : Execute program: SLDMSGSRV
    0: sapsrm_CRM_05                             : Execute program: SLDASSOC
    0: sapsrm_CRM_05                             : Collection of SLD data finished
    0: sapsrm_CRM_05                             : Data collected successfully
    0: sapsrm_CRM_05                             : RFC data prepared
    0: sapsrm_CRM_05                             : Used RFC destination: SLD_UC
    0: sapsrm_CRM_05                             : RFC call failed: / CPIC-CALL: 'ThSAPECMINIT' : cmRc=17 thRc=236#SAP gateway connection failed. Is SAP gateway started?
    0: sapsrm_CRM_05                             : Existing periodic jobs removed. Number: 1
    0: sapsrm_CRM_05                             : Program scheduled: 20080506 222324
    1: sapsrm_CRM_05                             : Event-controlled job already exists; scheduling not necessary
I came to know from other forums in sdn that we need to install/configure separate gateway if the SLD is on a standalone JAVA engine.
Also, in SM59 SLD_UC, SLD_NUC, SAPSLDAPI are failing with the same error of "RFC call failed: / CPIC-CALL: 'ThSAPECMINIT' : cmRc=17 thRc=236#SAP gateway connection failed. Is SAP gateway started?"
Please suggest how to resolve this. Please let me know if you need more details.
Thanks already
Edited by: Rahul Paul Patchigondla on May 6, 2008 9:57 AM

Rahul,
as RK already stated: the SLD has to connect to an SAP gateway, such is running on an ABAP system.
You may initially try to use the SAP gateway from the CRM ABAP stack. Therefore you will have to adjust the SLD to use that SAP gateway. On 6.40 SLD: Administration / Data supplier bridge / RFC gateway: Server (host name) and Service (combination of sapgw and instance number of CRM ABAP system).
After that, in CRM SM59 SLD_UC, SLD_NUC, SAPSLDAPI will have to be adjusted accordingly.
Regards, Boris

SLD - Register TREX

Similar Messages

Maybe you are looking for