Slideshow not visible in preview or when published

Hello, I am trying to add a slideshow to my page and it is visible in design mode but not in preview or when I publish. Page URL is http://thepeculiarpalette.businesscatalyst.com/artplates.html
Here is a screenshot of where it is supposed to be located. The header text isn't visible either. Can you please tell me what I am doing wrong?

Hi
I checked the site , header text shows up on page and the slideshow thumbnails also shows up, but the image on page does not shows up.
Tried to check and can see that image frame which is inserted in head section stretches down the page and thus overlaps with the image on page , try to lower down the size of image frame that is used in header section so that it does no overlaps with the hero image on page.
Thanks,
Sanjit

Similar Messages

  • Why my child or subpages not showing in preview or when published?

    Why are my child or subpages not showing in preview or when published?

    Hi,
    Are you unable to see the child pages in the Menu? If yes, please make sure you select "All pages" in the Menu type dropdown. By default, "Top level pages" is selected.
    Cheers!
    Aish

  • Key focus is not visible for all objects when tabbing

    I'm using LabView 5.1.
    The key focus is not visible for all objects when tabbing through a "disabled and grayed-out" object.
    For example, let's say I create a panel with 3 buttons. If I create a "disabled" attribute for button 2 and assign the value "2" (disabled and grayed-out) to it. When I will run this VI, the key navigation will go through button 1 and button 3 (skipping button 2 as expected) but the key focus on button 3 will not be visible.
    Is this a bug with LabView or am I doing something wrong ?

    Hi Ben,
    Don't worry, time is not an issue... I'm posting an example of a VI with the problem I described. I noticed that the problem occurs only with "dialog buttons".
    When you have time, let me know if you see the same behavior. If you do, I will report the problem to National Instrument.
    Thanks for your time !
    BigBen
    Attachments:
    3buttons.vi ‏22 KB

  • Audio not working on one slide when publishing to HTML5

    I'm in Captivate 8. In one slide in my project no slide audio will play when published to html5. I've tested in Chrome and IE 11. In Chrome, I see the 'speaker' icon that appears when audio or video is running but no sound comes up. (The speaker appears for the length of the audio file ~5 sec) All other slides are fine, and the slide audio plays correctly if I use F3 or F10 to preview the slide inside Captivate.
    The slide in question is a 'menu' only reached via an advanced action. I know the advanced action is not the culprit - if I change it to jump to a different slide, the audio on that slide plays without problem.
    Similarly, I've verified that if I place this audio file on a different slide, it plays fine, but if I add a different audio file to this slide the problem remains. If I create a button on the problem slide to trigger the audio it plays, (but is unhelpful since I want the audio to play automatically when the user enters the slide).
    I've tried removing/re-adding the audio, recreating the slide from a copy, setting the audio to play via an "on enter" advanced action, and adding a play trigger to the advanced action that jumps to this slide. Nothing I've tried gets the audio to play.
    I'd welcome any suggestions of what might be happening or how to fix this.
    Thank you,
    Jenny Nilsson

    Hi Lieve,
    Thank you, yes, if I view using f12 the audio works correctly.
    The "exitBranch" action is associated with a continue button at the end of each branch. If all branches have been visited, it jumps to a new slide, if there are unvisited branches, it jumps back to the menu slide where the audio is not working. (If I edit the action to jump somewhere else the audio will work for the different slide.)
    The action was created from a shared action and my colleague and I have used it in multiple other modules without this error.
    Thanks,
    Jenny N

  • Website doesnt not display as it should when published to business catalyst

    I have just uploaded my website created through muse via Business Catalyst, I have also made the website live. However when I go to via via thdawkinsphotography.businesscatalyst.com  the site doesnt appear the same with what I uploaded.  The title is smaller that it supposed to be.
    Here is how it should look.
    This is how it looks when published through Business Catalyst when made live.
    The top picture is how it also looks when previewed in Muse CC (2014)
    I am not sure why my site is displayed differently through Business Catalyst but I had moved from my original hosted site to business catalyst due to not being able to upload my site to the server via ftp as well as the site kept timing out, so I decided to use my Creative Cloud included webhosting through business catalyst.
    Can anyone help with this please. Is it a bug with Muse CC (2014) or Business Catalyst webhosting.

    After carefull investigations my original webhosting server is obviously having some major problems at present.  However I cannot see why hosting my site with Business Catalyst has reduced my Main Master page title size.   The width of the title should be longer than the length of the menu bar.  But it not and it obvious adobe have no idea on why its happen, and thats maybe why I havent heard from them.  As a result of this I will have to go and fork out more money to get webhosting  elsewhere which will allow me to upload my website through MUSE CC (2014). 
    I ask that if an adobe staff members reads this, please address this issue, as I need a webhosting service that will display my website correctly and business catalyst just doesnt cut to the chase.  Everything that was working fine for me in Muse CC is no longer working for me in Muse CC (2014). 
    Is there a way to revert my website back to Muse CC after opening it and editing it in Muse CC (2014).

  • First tab of Lable Based Menu is not visible in Preview Mode

    HI Genious,
    I have added one Lable Based Menu in my application. If i apply the dynamic visibility to it, in preview mode 1st tab is not visible all other tabs are visible.
    Ex. In Lable Based Menu, I have three label :- Distribution  Center, Zoo, Bird Park. I have applied dynamic visibility to this component. In preview mode, I am not able to visible the first label (i.e. Distribution Center) while all other labes are working properly.
    While i remove the dynamic visibility, All the labes are visible. But my application is not like that so i could not adapt that solution.
    Regards,
    Rishit

    Hi Rishit,
    Please let me know if you have applied Fix pacK3 for Xcelsius.
    I have seen this issue in FP2, which got fixed in FP3. The workaround you can try is including a blank cell.
    Thanks,
    Amit.

  • Placeholder content not visible in Preview

    I am a RoboHelp10 newbie with two projects on the go, one inherited and one new.  Placeholder content (breadcrumbs and Topic TOCs) is visible in Preview mode (Ctrl+W) in the inherited project, but not in the new project.  They don't show in Firefox/IE Preview either.  All other content/formatting seems to preview just fine.  MS_HTML_Help is the designated primary layout for both projects.  Based on a post in this forum, I tried updating DHTML effects, but it didn't help.  Any suggestions?
    I am assuming if they don't appear in Preview, they won't appear in the generated CHM.  Correct?
    RESOLUTION:  I finally fixed the problem with brut force by starting a new project and importing the HTML pages, etc.  Even then, it took a few tries before it worked.  Still don't know the underlying cause. 
    Message was edited by: Steve@SSA on 16Nov2013

    Vamsi mailed me offline and I have suggested looking at Using RH7 on my site where this problem is covered.
    See www.grainge.org for RoboHelp and Authoring tips
    Follow me @petergrainge

  • Master slide images not loading properly when previewing or when published

    I have created a master slide (including image) to be the background for my piece.  The image looks fine when I am in Captivate but when I preview the project the image does not display fully and only shows up bright bright white.  I tried publishing to see if this would make a difference but nothing.  I am using  a jpg image.
    Has anyone encountered this problem or does anyone have any ideas how I can make the image display?
    Thanks
    Jodie

    What is the slide quality? Default setting is Low (8-bit), depending on your JPEG-image quality this may be too low. Try to change to High or Optimized and see if this is better.
    Lilybiri

  • I am having trouble selecting (by mouse) a longer form when either previewing or when published

    Dear Adobe Community,
    In Adobe Muse, a longer form (modified via the widget) is giving me trouble after I created it since it isn't selecting the fields correctly (by mouse). You can tab through the fields fine. I have tried isolating the form on a clean page and it does the same thing as when surrounded by other elements.
    I have looked at it by previewing as well as published it on Business Catalyst with the same results. see http://formproblem.businesscatalyst.com/index.html
    How do I fix this?
    Sincerely,
    William

    Hello,
    I just checked, it seems to be Title field at the top which is creating issues with this form. The "required" (text) for the error state of title field is extending the title field area and causing part of the fields below it not accessible.
    Please try to delete and reinsert the title field to check if it works fine or not. And please make sure you delete the *required field (or disable it) before moving the title field and then you can enable the required text message back.
    Hope this helps.
    Regards,
    Sachin

  • Web site has A with symbol over it, but this is not shown in iWeb only when published

    iting the website of Robert T Mallory, DMD, a family dental practice in Helena, Alabama. 
    It is our mission to provide our patients with the most personal care at the
    highest quality possible.  We will strive to educate, motivate, and treat
    our patients in a manner that leads to excellent dental health.
    Our Office Hours are Monday-Thursday from 8:00-5:00
                                                                  
    Â
    The A in this website does not show up in iweb only after publishing, how do I take it out?

    Roger Wilmut1 wrote:
    If the server was sending UTF-8 what would this character appear as?
    You can see this for yourself by going to View > Text Encoding in your browser and setting it to UTF-8.  The characters will disappear.  They normally represent non-break spaces.   When the page is sent (or read) in Latin-1 encoding instead of UTF-8, they appear as Latin characters instead of empty space.
    The different results of PageSpinner are probably because it is using some other encoding like MacRoman.
    If you plug the url into this site it shows the encoding being sent by the server.
    http://web-sniffer.net

  • Value not visible in preview mode

    Hello there,
    On my dashboard, between other things, I have a simple grid component which should just show some resulted values.
    The problem I have is that when I connect the grid with the range of cells, everything looks fine but in preview mode, one line in the midle of the grid is showing "0.0" on all cells of the line and I do not understand why.
    The version I have is 5.3.4.0 with build no: 12.3.4.1038
    Any idea what to do?
    Thank you,

    Hi,
    When you are connecting your grid component it only taking static data, but while preview it is taking data from your data source. So I guess there is a possibility that your resulting data set contains a blank row (check your data from data source).
    try to create one more data grid with the same data set, but fetch populate the data into different location. See if it is still giving you the same problem.
    let us know if you already tried this before.
    Good Luck.

  • Placeholder not visible in custom page layout - publishing site

    Hi,
    I have a custom page layout in publishing site.
    I had added a new textbox to the existing page layout as below:
    <tr id="trCustomContent2">
    <td id="tdCustomContent" style="padding-top:5px;">
    <div id="divCustomContent" style="padding-left:6px !important;vertical-align:top; width:450px;" >
    <h3>
    <PageFieldTextField:TextField ID="TextField1" FieldName="fec9f0d3-77a3-4afc-99d3-99d2cb745d2c" runat="server" >
    </PageFieldTextField:TextField></h3>
    </div>
    </td>
    </tr>
    I deployed the changes, but in the edit mode of the page, i am not able to see the page layout.
    This issue is happening when a subsite is created. For the existing sites, the textbox is getting shown.
    How to fix this?
    Thanks

    Hi Venkatzeus,
    For each page layout, it has associated with a content type.
    You can click into the content type in site content types under Web Designer Galleries in root site settings.
    And then click Add from new site column to create and add the new site column to this content type.
    After that you can add this column to the page layout(.aspx page for the page layout) with the code below(you need to change the fieldname value to the corresponding GUID of the column):
    <div>
    <Publishing:EditModePanel runat="server" CssClass="edit-mode-panel">
    <PageFieldTextField:TextField ID="TextField1" FieldName="6bf50814-27d1-4b36-9980-c702c25080d7" runat="server">
    </PageFieldTextField:TextField>
    </Publishing:EditModePanel>
    </div>
    Best regards.
    Victoria
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • RX100 ARW files not visible in preview in Bridge CS6

    When looking at Canon RAW files (.CR2) I can see the previews fine in Preview. Not the same for RX100 arw files.  I can see the thumbnails ,  However preview window shows an icon with "exec" in it. Also, adjustments made in Camera Raw do not show in the thumbnails as with other my Canon 5D II raw files.  Help???
    Message was edited by: Sparros

    Thanks for the response.
    I updated to the latest version and was able to view the thumbnails in Bridge - someting I was not able to do until the update - the preview window still shows the green and grey "exec" icon or a white icon with arw under it.  I was hoping there is a simple fix in preferences or something like that.....I am stuck!
    Does anyone else have the same issue?

  • IWeb header does not retain its altered width when publishing to a folder

    I already had assistance to widen the web page header, and thought the problem was solved as below:
    I want to use Watercolor template in iWeb 3.0.4 but when I widen the page the full image does not follow.  Is there anything that can be done?
    iMac 7,1 Intel Core 2 Duo, Mac OS X (10.6.8), 2.4Ghz
    This solved my question by Roddy  on Apr 6, 2012 1:04 PM 
    If, for example, you mean the header background image you would need to go into the iWeb package contents and replace the image with a wider one.
    Here's an example of a page that's the "standard" 980 px wide instead of the iWeb default of 700px.
    Control click the iWeb application and select "Show Package Contents"
    Drill down through Contents/Resources/Themes
    Control click  "Watercolor.webtheme" and "Show Package Contents"
    Open the "Shared" folder to get the image
    I used EasyCrop to crop and resize the image to 980px X 90px and replaced the original with this wider one.
    However, when I publish the site to a folder, the old size is retained.  I have created new pages using the new enlarged header, but alas it is not retained when I publish.
    I have noticed the privileges of the altered file have changed. Originally it was assigned to be read by Wheel. But as soon as the file is altered, Wheel no longer exists.  Could this be the problem?  Is there a work around?
    Thanks

    Is there a work around?
    you can change it with javascript:
    http://temp.cyclosaurus.com/revolving/1px_line_border2.html
    copy the code in my page.
    add an html snippet to your page, paste in the code, click apply button.

  • Nav bar sub menu and Slideshow not displaying in preview?

    Hi,
    My website, markmillerdesign.com hosted by godaddy is not displaying the sub menu or the images to the slide show.
    I had to relink all of my assets because my computer was restored, but they all work until i preview in a browser or upload site.
    My Nav menu is set to show all pages but the sub menu is still not working or coming up?
    I have even made new slideshows and reinstalled images but they still do not come up in preview mode or on the web.
    Is there a way I can diag this? Any ideas?
    Please help!
    Thanks.

    I am now getting this same error on all of my websites. some of them I havent uploaded to or even updated for quite a while, is this a muse issue since the last update?
    Please help !

Maybe you are looking for