SNMP traps not capture in SCOM

we required to capture traps sent from the proofpoint(linux base) device - snmp v2 and display on SCOM but it does not work. we can saw the traps reach SCOM by using network trace. 

Hi
Check this
http://stefanroth.net/2014/04/07/scom-2012-snmp-traps-how-the-heck-do-i-get-it-working/ and thishttp://blogs.technet.com/b/kevinholman/archive/2015/02/03/snmp-trap-monitoring-with-scom-2012-r2.aspx
and this
http://blogs.msdn.com/b/wei_out_there_with_system_center/archive/2014/02/15/opsmgr-customizing-the-snmp-trap-collection-rule-for-all-snmp-version-traps.aspx .
I think this should solve your Problems.
Cheers,
Stefan
Blog: http://stefanroth.net If my post helped you, please take a moment to vote as helpful and\or mark as an answer

Similar Messages

  • SNMP traps from HP NNMi - SCOM

    Hi,
    We wan't to forward snmp traps from hp nnmi to scom.
    I have found a description of a solution for this here: http://social.technet.microsoft.com/Forums/systemcenter/en-US/19c29988-dfe8-4918-b0d5-f3124bcfea95/operations-manager-and-hewlett-packard-nnmi?forum=operationsmanagergeneral
    I have added a server as snmp device. By using snmptrapgen I have also confirmed that the traps are received from scom.
    In NNM I have specified that all traps are to be forwarded to the server which is discovered as a network device. I have also activated the snmp services and set the correct settings. These traps have not been received in scom.
    Have I understood this correctly? If NNMi just forwards the traps, will not the traps have source IPs which is not registered as network devices in SCOM, and therefor be discarded? 
    I would very much like to hear from people how have done a simular type of integration :)
    Thanks in advance, Best Regards

    Yes, I think the Network Devices need to be discovered first in order to receive traps and generate alerts.
    Juke Chou
    TechNet Community Support

  • HP Systems Insight Manager SNMP Traps not being received

    I found the following on HP help....is it any use?Why am I not receiving notification when there is a SNMP Authentication trap received? Solution: The default setting for Enabling Trap Handling in SNMP Extensions is Disabled (Not Processed). The reason for this is because typically, a system can be set up with an incorrect community string or an incorrect community string is set in HP Systems Insight Manager, which results in an Authentication Failure trap to be sent to the management server each time a request is made to the system. This results in many traps being logged. To change this setting to Processed (Enabled), complete the following steps:Open HP Systems Insight Manager (http://machinename:280).Log in as a user with full configuration rights.Select OptionsEventsSNMP Trap Settings. In the Mib Name field, select rfc1215.mib.In...

    Hello,
    New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
    System Insight Manager (SIM Server)  receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts. 
    When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
    I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted. 
    As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
    Any ideas anyone as I am stumped?
    This topic first appeared in the Spiceworks Community

  • SCOM receiving SNMP traps from HP IMC

    Hi all,
    I've been tasked with creating SCOM alerts from SNMP traps which are forwarded from HP IMC. Each SNMP trap will arrive at SCOM from a single source (IMC server) but each will contain different information. Can someone suggest the best way for me to generate
    individual alerts from this? I'd also appreciate any comments on alternative ways to do this (apart from simply using both systems separately!).
    The environment is SCOM 2007 R2 on a 2003 R2 server.
    Thanks in advance for any suggestions.

    Hi
    This comes up on the forums quite often so here are a summary of some of the best articles I’ve found on the net:
    Configuring using the GUI:
    The System Center Central team have a great series –
    Part I,
    Part II,
    Part III, and
    Part IV
    David Allen has a good walkthrough here about creating
    SNMP Probe based monitors.
    Issues with using the GUI to create monitors with numeric expressions – see Raphael Burri’s
    blog
    SNMPVarBinds and the Alert Description Field –
    http://blogs.msdn.com/b/rslaten/archive/2007/10/31/snmpvarbinds-and-the-alert-description-field-in-opsmgr-2007.aspx
    oring Console:
    Kris Bash at Operating Quadrant has some great articles on SNMP monitoring.
    The only thing to be careful of before investing too much time in customisation for network devices on SCOM 2007 R2 is that when you move to SCOM 2012, you might well need to redo them as network monitoring has changed.
    http://blogs.technet.com/b/momteam/archive/2011/10/24/migrating-operations-manager-2007-network-monitoring.aspx
    Cheers
    Graham
    Regards Graham New System Center 2012 Blog! -
    http://www.systemcentersolutions.co.uk
    View OpsMgr tips and tricks at
    http://systemcentersolutions.wordpress.com/

  • SCOM 2012 SP1 - Show on event view all snmp trap (SNMP monitoring work)

    Hello everybody, 
    Sorry for my english, I write normaly in french, but we have more result in english. 
    I have a problem with SCOM 2012. I try to catch all snmp traps sended by a 2960 CISCO switch on a EventView with a specific rule (Authoring->Rule->Collection Rules -> Event Based -> SNMP Trap (Event) based on the object target "Node")
    I creat a specific management pack juste for the rule and the views. 
    SNMP Monitoring - CISOC 2960 => It's OK, I can have the processor state, utilization, etc ...
    SNMP Monitoring Ubuntu computer => It's OK, I can have all the state I want.
    SNMP Traps => The switch or the computer send traps over the network, and I can see in wireshark, the server receive the traps
    SNMP Service (Windows service) => Disabled
    SNMP trap (Windows service) => Disabled
    Health Service (Windows service) => Enabled
    Port 162 UDP => Open and listenning by the MonitoringHost.exe
    Firewall rules => Everythinks is OK
    SNMP Trap send version is => 2c
    SNMP Monitoring device version is => 2c
    I try too many of solution on different web site like :
    http://scom-2012.blogspot.ch/2012/07/setting-up-snmp-monitoring-in-scom-2012.html
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/731661b9-10a1-4d3f-ba83-8e84d25ab760/event-collection-for-network-devices-scom-2012
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/a15bce49-fb62-4fd4-93cf-f87c3b734d58/snmp-trap-based-monitoring?forum=operationsmanagergeneral
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/4051fbd1-06f1-49e0-9ad4-4cbe4d2d7d4d/discover-windows-computer-as-network-device-w-snmp?forum=operationsmanagerauthoring
    http://technet.microsoft.com/en-us/library/hh563870.aspx
    http://social.technet.microsoft.com/Forums/en-US/cad1d3f9-594f-4f06-a5aa-660ccc2e9192/snmp-trap-based-monitoring-in-scom-2012-sp1?forum=operationsmanagerauthoring
    http://social.technet.microsoft.com/Forums/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/e05a1c8f-7280-4f80-86cf-aabb4269bb87/scom-2012-customizing-snmp-trap-event-data?forum=operationsmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/6826f6a6-bbc3-444b-9b18-288d7fedac3e/scom-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/7cd1571a-d292-4efc-9921-5a068f6f1691/scom-2012-sp1-ur2-snmp-monitoring?forum=operationsmanagermgmtpacks
    Do you know a workaround? Or a different way to catch all the traps from a network device and show them (traps) on a event views.
    Thank you in advance. 
    KimBaxZ
    Computer expert system technology

    Hello Yan Li,
    I read your link, and I found this : 
    The network devices must be discovered and registered as ICMPSNMP devices.
    And when I make the dicovery the first time, ICMP doesn't work, so I put only SNMP. This morning I tried with ICMP and SNMP, but the same problem come to me. And I found the rootcause of the problem with this post : http://www.code4ward.net/main/Blog/tabid/70/EntryId/105/Troubleshooting-Network-Discovery-in-SCOM-2012.aspx
    I allowed the SNMP service, ping, and Health Service, just after I try a second time to dicover my device and it's work (ICMP and SNMP).
    I recreat all my management pack and the rule. And now it's work! Thank you very much for your help!!
    Have a nice day
    Best regards
    KimBAxZ
    Computer expert system technology

  • SCOM 2012 SNMP Trap - Does anyone have it working?

    I am wondering if anyone out there has had any luck with getting SNMP Traps to be captured by SCOM 2012?  Probes work fine.
    We have been unable to get SCOM 2012 to receive a SNMP Trap from network devices.  We currently have a case open with Microsoft, but they dont have any answers as of yet.
    Here are the cliff notes version of what we have done so far.
    Discovery - OK
    The nodes discover without issue.  I made sure they were set to SNMP only.  I did this to verify we were talking SNMP and not just ICMP.
    Open Ports/Firewall Issues
    No firewalls are in place on the SCOM server and none exist between devices we are trying to get traps from.  Using a port tool, I can see that UDP 162 is listening as expected and its the System Center Management Host Process that is running the
    process.  We have tried having SNMP installed, but disabled, installed and running, and uninstalled.  Currently we have the SNMP service installed and running.  The SNMP Trap Service is NOT installed.
    Data Validation
    Using Wireshark running on the SCOM box I have been able to validate the OIDs we are searching for are hitting the SCOM server.  I installed an SNMP Trap generator and Receiver on my local machine as well as Jalasoft SNMP Simulator.  I was able
    to discover my local machine as a network device and if I send a TRAP from the TRAP generator on my local machine to the receiver on my local machine I can validate the data is coming through ok.
    What has been done on SCOM side
    The simplest place to look for data is with an Event Collection Rule and then an Event View Monitor.  We have set up an Event Based Monitor to search for an OID that I know to be accurate and then I set up an Event monitor to look for
    anything hitting that Collection Rule.  The Event monitor showed nothing so we changed the EVent Monitor to look for anything that hit Node which should show any SNMP traps that have hit from network devices.  No results.
    We tried to run WFAnalyzer from the 2007R2 Authoring Console, but it wont run against 2012 and from what I have found the 2012 edition doesnt exist anywhere yet.
    So has anyone succesfully received a SNMP TRAP into SCOM 2012?

    Hi,
    As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
    In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
    Thanks,
    Yog Li
    TechNet Community Support
    How could you possibly mark this as answered? No answer was given, it was quiet for a couple of days including one of which was a holiday in the US. The previous steps are NOT helpful.  The question remains, Does anyone have it working?
    People have given troubleshooting advice, but nobody has actually answered the simple question.  Do they have it actually WORKING?

  • SNMP traps from EMC SRM to SCOM 2012 R2

    Hi,
    I'm trying to configure SCOM 2012 R2 as an SNMP trap listner.  I've seen many articles on setting this up but all are based around SNMP traps from network devices which must first be discovered and identified in the network device list.
    However in my scenario I am trying to monitor/listen for traps send by a Linux box hosting EMC SRM - this management software can be configured to send SNMP traps out so it is these that I need to try and listen for/capture.
    So can anyone explain how I can configure SCOM 2012 R2 to do this.  I have tried to just used the IP of the Linux box and discover it as a network device but it fails - in Network Devices Pending Mgmt it says No response Ping, even though I can
    ping the box from the Server OK - so I am guessing you cant cheat scom in discovering the Linux box as a network device in ths way?
    Can anyone offer any advice for setting this up.  Just to add I've ensured the RunAs Community String (public) and SNMP version is correct on both side...
    Cheers...

    Once the Network Device (Linux server in this case) is discovered you will still need a rule that targets that class and accepts incoming SNMP Traps for that OID, or All OIDs if you prefer.  I found 2 links that may be of help, the first is just a basic
    overview of the SNMP listener in SCOM 2012 as it has changed from the OS Listener in 2007 to a dedicated one.
    http://systemcentertech.com/2012/05/17/scom-2012-built-in-snmp-trap-listener/
    The second link covers SNMP setup, but starting at Step 7 there is a great how-to on creating your own SNMP rule which will be needed to collect your traps.
    http://scom-2012.blogspot.com/2012/07/setting-up-snmp-monitoring-in-scom-2012.html
    www.Practice2Perfect.com

  • CiscoWorks LMS: not receveing certain SNMP traps

    CiscoWorks LMS 4.0.1 (I know it's old and unsupported).
    Problem: not receiving certain SNMP traps.
    For example: I receive trap like "STP new root" but not like "port put to err-disabled" or my custom traps (produced by EEM scripts).
    I've investigated my situation and found out that switch sends traps and they reach* LMS but somehow LMS ignores them (there's no trace of them in GUI). I've read that some traps just pass through LMS but my traps are very important and I need to know about them.
    * I did Wireshark capture on LMS machine.
    I'd like to know how to debug receiving of SNMP traps in LMS:
    which specific debugs need to be enabled,
    which specific log files need to be examined.

    LMS uses DFM to process certain traps.
    All traps it deems unimportant are dropped.
    If you want to use the LMS GUI you can have you device send a SYSLOG message rather than a trap.
    use logging source command to make the management interface send the message.
    Then there is a GUI that allows you to launch an action on a message
    Cheers,
    Michel

  • SCOM 2012 unable to monitor SNMP traps

    After installing SCOM 2012 I did not
    get the SNMP Trap. I tried the solution
    of the topics http://social.technet.microsoft.com/Forums/en-US/operationsmanagergeneral/thread/6826f6a6-bbc3-444b-9b18-288d7fedac3e Nothing
    has helped.
    Help please, why SCOM can
    not take Traps?

    We had the an issue where device was sending SNMP v1 traps as per Wireshark but the device was discovered as a SNMP v2 device. We forced the device to be discovered as a SNMP v1 device and that worked.
    To do so, after you add the device that needs to be discovered within the discovery rule, export the MP called Network Discovery Internal. Open this in notepad and browse to the IP address of your device that needs to be discovered. Change the value for
    "AutoDetect" to v1 in case you want to discover his as a V1 DEVICE. Then you will be able to receive traps from the said device that got discovered.
    <SeedSystem>
                      <SeedIPorName>10.100.x.x</SeedIPorName>
                      <Version>AUTODETECT</Version>
                      <SNMPPort>161</SNMPPort>
                    </SeedSystem>
    Hope this helps.
    Kapil Dham

  • Cisco Prime Infrastructure 1.4 SNMP Traps are not converted into Alarms

    Hi everybody,
    I just configured SNMP Traps on a Cisco Catalyst 3750-x to send to our Cisco Prime Infrastructure 1.4 Appliance.
    Now I forced the Switch to send some traps (Power off a Power Supply, Interface errdisable). The only events I see in Alarms & Events on PI is the same information message everytime:
    Configuration management event has been recorded in ccmHistoryEventTable.
    I think the forced traps should be converted into alarms? Why can't I see them?
    Thanks,
    Marc

    Ok, I started debugging as you said. I get the following output:
    Mar 13 09:28:13.711: SNMP: V2 Trap, reqid 11689, errstat 0, erridx 0
     sysUpTime.0 = 198609846
     snmpTrapOID.0 = ciscoSyslogMIB.2.0.1
     clogHistoryEntry.2.1688 = PM
     clogHistoryEntry.3.1688 = 5
     clogHistoryEntry.4.1688 = ERR_RECOVER
     clogHistoryEntry.5.1688 = Attempting to recover from bpduguard err-disable state on Gi1/0/13
     clogHistoryEntry.6.1688 = 198609844
    Mar 13 09:28:13.737: SNMP: Queuing packet to xx.xx.xx.xx
    Looks like the Switch is sending SNMP Traps from the ciscoSyslogMIB. Is this why PI can't show the Traps and convert it into a alarm?
    After this test I configured logging (syslog) to the PI. Now the errors are showed but still not converted into alarms. I just want to be notified by email when such errors occurs.
    Thanks,
    Marc

  • Cisco WLC 5508 not sending SNMP Traps

    Hello Everyone.
    I'm having a weird error on our WLC environment. We have an HA with two cisco WLC 5508 and i cannot get SNMP Traps working on a Windows PC running Kiwi Syslog server (free ed.).
    I can receive correctly Syslog messages, but not traps.
    I Tried also to send SNMP Traps from WLC to a different PC using Linux with snmptrapd and it works fine.
    I tried then to send from my Linux box a snmp trap to my Windows PC, and it works fine, but i still cannot receive anything from WLC.
    Using Wireshark to detect traffic, i cannot see any packet on udp port 162.
    I cannot figure out any problem with my scenario, but i can see the following errors on syslog:
    *rmgrTrasport: Mar 30 16:08:22.602: #RMGR-3-INVALID_PING_RESPONSE: rmgr_utils.c:270 Ping response from <my_windows_PC> is invalid. Ip address do not match.
    My WLC Version is 7.6.130.0
    Thank you for your support.

    I have gone through your query and found the following fruitful links ,please let me know if it helps and mark it correct answer if it is.
    https://www.manageengine.com/network-monitoring/help/userguide/processing_traps.html
    https://rscciew.wordpress.com/2014/10/12/snmp-configuration-on-wlc/
    Thanks :)

  • LMS 3.2 not forwarding SNMP Traps

    I am using LMS 3.2 and under DFM... Notification Services... SNMP Trap Notification, I have a Subscription set up to forward Traps to Unicenter 11.1.  I have tried a combination of sending Alerts and Events, Critical and Informational, Active and Cleared messages.
    At this time I have it set to send:
    Alerts Informational and Cleared
    Events Critical and Informational, Active and Cleared.
    Every Trap that is forwarded from LMS I get in the Unicenter console Twice.   Also, I occasionally get a clear in Unicenter, but normally clears are not being forwaded.
    Any ideas on this issue?
    Thanks
    -Scott

    You should first install the consolidated DFM 3.2 patch from http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=3.2.0&mdfid=282640771&sftType=CiscoWorks+Device+Fault+Manager+Patches&optPlat=Windows&nodecount=2&edesignator=null&modelName=CiscoWorks+Device+Fault+Manager+3.2&treeMdfId=268439477&treeName=Network+Management&modifmdfid=&imname=&hybrid=Y&imst=N&lr=Y (patch for CSCta56151).  If the problem persists after that, post the NMSROOT/log/dfmLogs/NOS/nos.log after reproducing the problem with a new event/alert.

  • I can not make IP SLA to signal SNMP traps upon timeout

    Hello team.
    I want SNMP traps to be sent every time an IP SLA (ICMP) object times out. For that purpose, I carried out the following
    ip sla monitor logging traps
    ip sla monitor 1
    type echo protocol ipIcmpEcho 10.1.1.254
    timeout 1000
    frequency 15
    ip sla monitor schedule 1 life forever start-time now
    snmp-server enable traps rtr
    snmp-server host 10.1.1.10 mycommunity
    But no SNMP trap is sent when the IP SLA object times out. ¿ Am I missing something?
    Any help will be greatly appreciated.
    Rogelio Alvez
    Argentina

    SNMP traps for IP SLAs are handled through the system logging (syslog) process. This means that system logging messages for IP SLAs violations are generated when the specified conditions are met, then sent as SNMP traps using the CISCO-SYSLOG-MIB. The ip sla monitor logging traps command is used to enable the generation of these IP SLAs specific traps. The generation of IP SLAs specific logging messages is dependant on the configuration of the standard set of logging commands (for example, logging on). IP SLAs logging messages are generated at the "informational" system logging severity level.
    The command ip sla monitor logging traps is sometime hidden and may not show with ?, so just copy and paste in global config mode and have logging on and check if any traps are generated.
    -Thanks
    Vinod
    **Encourage Contributors. RATE them**

  • NAC SNMP MAC notification traps not being sent

    I have the switch set up for mac notification, and the switch has the below config. But no mac notification traps get sent to the CAM.
    interface GigabitEthernet1/0/24 switchport access vlan 800 switchport mode access snmp trap mac-notification added spanning-tree portfast!snmp-server community **** ROsnmp-server community **** RWsnmp-server enable traps snmp linkdown linkupsnmp-server enable traps MAC-Notificationsnmp-server enable traps stpx root-inconsistency loop-inconsistencysnmp-server host 10.101.90.20 version 2c **** snmp-server host 10.101.90.20 **** MAC-Notification snmp
    Below is a debug of snmp packets when a host it connected to the switch on port 1/0/24
    1y29w: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/24, changed state to up1y29w: SNMP: Queuing packet to 10.101.90.201y29w: SNMP: V2 Trap, reqid 62, errstat 0, erridx 0            sysUpTime.0 = 648642685            snmpTrapOID.0 = snmpTraps.4            ifIndex.10124 = 10124            ifDescr.10124 = GigabitEthernet1/0/24            ifType.10124 = 6            lifEntry.20.10124 = up1y29w: SNMP: Queuing packet to 10.101.90.201y29w: SNMP: V1 Trap, ent products.516, addr 10.202.1.2, gentrap 3, spectrap 0            ifIndex.10124 = 10124            ifDescr.10124 = GigabitEthernet1/0/24            ifType.10124 = 6            lifEntry.20.10124 = up1y29w: SNMP: Packet sent via UDP to 10.101.90.201y29w: SNMP: Packet sent via UDP to 10.101.90.201y29w: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/24, changed state to up
    Am I missing something in the config or something?

    Hello,
    Please post your SNMP receiver config on the CAM. Also, can you do a capture on the CAM to see if you're seeing the packets getting there?
    To do the capture, in a SSH session, use this command: tcpdump -ieth0 'host ' -s0 -wcapture.pcap
    Once you've captured the success/failure, hit Ctrl-C to kill the capture. You can then use WINSCP or any other SCP program to get that file off of the CAM for further analysis.
    HTH,
    Faisal

  • CAM Event Log: SNMP trap is received from switch [ ip address ] which is NOT in our database.

    We keep getting thousands of entries in the CAM event log like this:
    SNMP trap is received from switch [<ip address>] which is NOT in our database.
    apparently, these aren't NAC'd switches. Why does the CAM see these and how can they be eliminated from the Event Log?
    Thanks,

    Matt,
    Do you switches have the CAM as a host where they are sending traps? Check the running-config of the servers and see if you spot the CAM IP address as one of the snmp-servers.
    HTH,
    Faisal

Maybe you are looking for