SOA Design issues and other politics

Hi all,
I have a requirement for live data feed from external system. I am using SOA11g and JDeveloper 11g. There are two designs, one proposed and other I have in mind to achieve this.
1) The external system sends XML data in a push model to the exposed SOA Web Service (uses one-way messaging mode) at my end. I then store the message in the database
a) In this design how do we keep track of all messages that are sent are received. Is there a better solution.
2) The third party is proposing a Web Service at their end. The application being real-time (i.e any changes at their DB end i.e some DB tables, should be propogated across to our web services using XML messages). I will have to keep sending XML requests on a regular basis (say every 5 seconds). Can I achieve such type of Web Service client using SOA 11g?
a) Here I have a design issue, that the data feed is live, why do the WS client have to keep sending requests at regular intervals. Why can't the third party send data whenever there is an update/insert at their database end. Third party is coming up with advantages like loose coupling and making the Web Service more generic. I doubt all the claims give that the applications are B2B and we are the other ones who will be using their web services for the time being. Their may be other two organizations later on.
b) If the first request is not yet returned, will the second request after 5 seconds be blocked.
This designs and solutions are becoming quite political across organizations, and got to do with who will take the blame for data issues. I just want a proper SOA design for live data feed. Please suggest the advantages and disadvantages of both if anybody has been through this path.
Thanks
Edited by: user5108636 on 1/09/2010 18:19

See if wireless isolation is enabled.
When logged into your WRT1900AC using local access replace the end of the browser URL with:
/dynamic/advanced-wireless.html
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

40RV525U HDMI issues, and other problems

I'm using the 40RV525U model, and none of the HDMI ports work consistently, if at all. It's been like this since I bought the TV, but I (unfortunately) didn't take it back because I could use component cables with the PS3...it's primary purpose. I recently bought a PS4, and there are no component cables available, and converters don't work. Surpringly, I was able to get the HDMI 1 port to work after changing the PS4's output to 720p, but it wasn't consistent. It worked great for about 3 days, no problems at all. And then last night, it started losing the handshake every 30 seconds or so. I would get the dreaded snow screen (snow looks great in HD, btw) and black screen, and then it would re-connect and I'd have picture for a minute.
The fact that I was able to get it to work for 3 days without the slightest problem leads me to believe that it's a firmware issue. I'm on 1.05, the latest firmware version that I can find. Are there any further updates? The problems with this TV are numerous, but I like the picture, and I can't really afford to buy a new TV.
Thanks

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

Latency setting issues, and other problems.

Hello, this is my first time posting on a forum, and I wouldn't be here if I didn't think this was an interesting problem.
My computer (Hardware listings below) has a microphone lag issue. I tested it by plugging in my microphone and recording the recording through speakers, and it is very clearly lag. I am in need of a solution to that, but that is just where my problem starts. Whenever I try and load in an MPEG4 audio file, it seems to play and then all of my sound goes out on my system. Sometimes the sound goes out immediately after opening the program. The way I treat it is by putting my computer to sleep and waking it up, and the sound then returns until the program decides to randomly shut it down again. The mixing tables are reacting on screen, but there are no system sounds coming out at all. On top of that, when trying to fix my latency issues, it didn't help enough moving it down to 30 on the hardware options for the MME settings. It could be my computer is too slow or something, but I also tried switching it to asio. I have ASIO4all and I don't know if I should be running it, as I don't know too much about how my system would interact with all of these programs. I run Audition 5.5 fully legally, and I can update with whatever. I just want to be able to overdub without any lag, and everything I do to try and fix it makes a new problem happen. I am using a microphone plugged into the 3.5mm microphone slot on the motherboard. It's a Sure mic plugged in through an SLR to Quarter Inch male cable
SYSTEM:
Built
OS: Windows 7
Motherboard: EVGA P55 FTW 200 SLI
Processor: Intel I-5 760 quad core
RAM: 16 gigs Corsair XMS3
Video card: EVGA GTX 460 SE
Hard drive: W.D. Caviar Black 7200 RPM 1TB
Coolermaster storm scout case
Disc drive and Corsair power supply
If anybody knows any part in fixing or at least telling me why I have issues with all of the information I provided, I would love to hear it. I just want to record so badly after spending all of this money on the software and hardware and cables and etc...
Thank You

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

WRT1900ac: Defects, Issues and Other

This is follow up on the issues, I had with WRT1900ac, in case others stumble over them as well.
Setup:
+-----+----(R) Internet - via Cable-modem 30Mb/5Mb
|Fire |----(O) Internet Spur – to switch (here for completeness)
| wall|----(G) Protected wired network – to switch
|-----+----(B) Protected wireless network
+-----+----(I) Internet Port – connected to FW(G) via switch
|WRT |----(S) Switch 10/100/1000 ports – connected to FW(B)
| 1900|----(2) 2.4GHz wireless
+-----+----(5) 5.0Ghz wireless
+-----+
| RPi |----(R) Internet – '11n via WRT(2)
| FW |----(G) Protected wired network (Private) – to switch
+-----+
+-----+----(2) '11n – connected WRT(2) – Also default router
|Desk | \- Vnet0 for vmware Vms
| Top |----(E) Ethernet – connected to RPi(G) via switch
+-----+ \- Vnet2 for vmware VMs
Other wireless devices set to use WRT(2)
4 phones
3 tablets
3 media players
4 desktops/laptop/netbooks
DHCP Servers and the subnets they control:
FW(G) x.x.13.0/24
FW(B) x.x.23.0/24
RPi(G) x.x.0.0/24
Tests:
1) Disconnecting FW(B) from WRT(S) and WRT1900ac is DHCP server. All traffic is then passed through WRT(I) to FW(G) and finally to Internet. Gateway via DHCP is point to WRT(S,2,5)
2) FW(B) us connected to WRT(S) and WRT1900ac DHCP server is turned off. All traffic is then passed thought FW(B) and finally to Internet. Gateway via DHCP is pointing to FW(B)
Defects:
1) Cannot connect between wireless channels even though they are on the same subnet. A device connected to WRT(5) cannot ping nor connect to service on WRT(2). This prevents a device on WRT(5) form using a printer on WRT(2). Similarity, a media device on WRT(5) cannot access a media server on WRT(2).
WRT (S) (2) (5)
(S) OK OK OK
(2) OK OK __
(5) OK __ OK
Workaround is using two wireless routers. One handling 2.4 traffic and the other 5.0 traffic, internet connect routers together via a switch port.
2) Connectivity → Local network → Router Details is not editing IP address telling you are duplicating another address on the subnet. Instead it acts like it made the change you asked, then changes it to a random IP address in 10.0.0.0/24 network. If WRT1900ac is the DHCP server, then this change is not too bad, since it changes the DHCP Ips also to this new subnet and DNS server in the WRT1900ac hands out the correct new information. You are left thinking all is OK, but it is not what you set out to do.
If you are changing this IP and Turning off DHCP server same time (they are on the same panel), then the action will basically leave you with an unreachable WRT1900ac. It will forward traffic between wired and wireless, but you are unable to connect to it to make any changes. From a user veiw, the WRT1900ac “console” is gone. You have to do a hard factory reset to gain access again.
Work around be very careful.
Suggested solution would be for the WRT1900ac to valid the address the user has requested to change to. Like DHCP server validates the address there is with-in the subnet of WRT1900ac own IP.
Further since this function of checking and change IP is part of base system, if the IP is changed, then the DHCP server should be corrected and re-enabled as well. This would allow the user regain access to the WRT1900ac and correct the error with a full factory reset.
Lastly an error panel should display once the user signs into the WRT1900ac, telling what the router did to make it work again. Further assisting the user is making correct entries.
3) WRT1900ac (via looking at Network Map) incorrectly identifies if a device is connected via wired or wireless, leading to bad return routes.
In Test1, when WRT1900ac was controlling the DHCP. When a vm was started on the Desktop use Vnet0 that bridged network via WRT(2), the VM would get an IP and would show up on the Network Map. But the connection Icon shows up as wired and not via 2.4 wireless. After a few moments (less than min) all tested (one at time, Linux, BSD, and WindowsXP) lost the connection though Network Map showed them as if the MAC manufacturer ID (the first three hex pairs) were used to determine the route in WRT1900ac. When I switched the from Vnet0 to Vnet2 (private network with Rpi acting as the DHCP server and wireless bridge) all got connections and were able to work correctly (as expected).
In Test2, did not have an issue with this vm bridge function. Though Network Map does not display hosts. Yes, I turned on all View Device and Connection Types.
There was one strange thing did happen though, when WindowsXP was connecting, Network Map changed the Linux Desktop Host Name to WindowsXP name as all capitals. The WindowsXP host did still appear all lowercase with an icon wired. WindowsXP worked longer than the others, as if this “cross wiring” help WRT1900ac understand the route better.
4) When force to do factory reset, WRT1900ac does reset the hardware password to that on the router, instead assigns a random password. It does for default correctly for wireless WPA2. By not defaulting back to to the known hardware password, the user is forced to go through the simplified configuration including connecting WRT(I) to an Internet connection.
Issues:
1) Connectivity → Local Network once you click on this tab, you cannot click on any of the other tabs without getting “Save changes” panel. The choice there are Cancel, Yes and No. Only Cancel works. Then you have to Cancel from prior to page to actually get out.
2) Network Map failing to correctly identify devices. Showing devices with incorrect hostnames or descriptions. Examples:
a) Win8.1pro on wireless has an icon of printer.
b) Linux box with vm of WindowsXP and Plex Web Server loaded, is showing with the XP machine host name and Manufacturer of Plex
c) iPad showing up a general network device, where an iPhone shows up as phone. The both have the same release of iOS.
d) Windows phones and display as network with a host name of “Network Device”.
e) Epson wireless printers, only 1 out of 3 display with host name.
f) “Roku Streaming Player” is the same name of each Roku on the network, not the one that displays on iPhone or wireless or on the player itself.
Suggested solutions include:
a) Try using SMTP to get device information.
b) Looking up the device name via DNS then DHCP to show what other equipment calls it.
c) Showing the IP address for a host name instead of a nondescript “Network Device”
Other:
1) Only a single MAC address. WRT1900ac uses a single MAC address. This address is used for both internal [WRT(S,2,5)] and external [WRT(I)]. This maybe OK under connecting the WRT1900ac directly to Internet, but causes routing issues when both are connected to same internal hardware, since the ARP will have to routes to same “equipment”. This found when determining why WRT190ac was changing its IP address from assigned.
Workaround is to go to Connectivity → Internet Settings → MAC Address Clone and enable it and makeup a MAC address for WRT1900ac. I used added 1 to my WRT1900ac MAC.
2) Simplified setup does not allow setting 5.0GHz CCSID. It will copy 2.4GHz ot add _5GHz on to it, but not to name it, this thrid option would be a great help.
3) Connectivity → Local Network → DHCP Server setup allows for 3 DNS, bBut this list is not sent to cleints. Instead DHCP server sends the IP of WRT1900ac. This is by design, since Linksys wants the “linksyssmartwifi.com” to resolve to 192.168.1.1, or what you set as WRT1900ac to under Router Details on the same page.
It would be better if those fields where moved from DHCP Setup, to at less the otherside of the panel so the user does not assume that these DNS will be informed to clients.
4) External Storage not only allows access to mounted usb drive, but access to /sda including subdirectories of .tmp and cache, which in turn gives access to client.data, db.info, tsbyebye, twonky.log, twonymedia-config.html and twonkymeida-locations-6.db.
5) There is no effective method to block or tuen off the WRT1900ac from talking to Linksys Command and Control (for my router it was 50.18.198.232 port 5222), on the Internet except disconnecting WRT(I) wire. Even if blocked in the firewall, the WRT1900ac keeps pounding the firewall, to get access to the Internet, at rate up to 1Mbps.
Yes, this means I have disabled the ability of WRT1900ac from auto-updating, but I also blocked the risk of someone gaining access to my router via Linksys Command and Control. If you log-in via your email address and password, even if you “connected” directly in to the router (say 192.168.1.1), this traffic sent/validated though Linksys Command and Control (ie: a request leaves your router and sent over the Internet to Linksys CnC, then sent back). The iPhone app again, goes through Linksys CnC, and with it ALL setting on the router, including passwords, SSID, open ports and device list with IP. In the end, the router is not under your direct control or ownership, but that of Linksys and their ability to protect your information on their Amazon cloud server.
Miscellaneous:
1) The download EULA for the software update for this device is 117 pages long, with a two step acceptance. The warranty is 135 pages long.
2) Calling Linksys Support Line custom for WRT1900ac, and after working with the person of almost 1.5hrs, found out the person had no clue what an IP was or how to configure normal static IP. When requesting the next level for support, “They will call you back in 24 to 72 hours.” After hanging up and starting again, found the next person equally unable to answer simple direct questions, asked for a manager. She suggested that this call was really about Quality, then said “they will call you back in 2 to 5 days, after receiving the a support ticket.”
In closing:
Support for WRT1900ac is either massively back-logged with problems or so understaffed that there is no hope to get anything really fixed. OpenWRT, at my last view, is still in testing phase and Linksys will not warrant any damage or problems that arise out it use. So my only real option is return this equipment, since there is no likely fix any of the issues above. Long term Linksys needs to work on its quality controls, and stop burning up goodwill that brand name had carried.

See if wireless isolation is enabled.
When logged into your WRT1900AC using local access replace the end of the browser URL with:
/dynamic/advanced-wireless.html
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Win 7 Pro x64 - MS Office 2010 - .exe and .dll issues (And other)

Hi all,
Issue:
Cannot launch MS Office in anyway - Comes up with "c:\program files\commonfiles\microsoft shared\office14\MSO.DLL is either not configured or designed to run on windows ......" then the same box again immediately after "c:\progra~1\common~1\micros~1\office14\mso.dll"
is either not designed to run on windows or contains and error....."
Cannot run Google, cannot run IE, cannot start Help and Support cannot run the install disk as it comes up with "ieframe.dll" issues.
error box has been coming up "The operating system is not presently configured to run this application"
Am searching for answers here have tried EVERYTHING!
Earlier restore points, scannow, registering the .dll
I dont have the MS Office disk as I bought the laptop with both WIn 7 Pro and Office 2010 installed. ALthough I have now borrowed a friends Operating System disk.
Im after a way to restore the files without a full install shagg around to find the drivers etc ...
any ideas appreciated?

Hello Nzrogue，
About repairing Office, please take a look at the following article.
https://support.office.com/en-us/article/Repair-an-Office-application-7821d4b6-7c1d-4205-aa0e-a6b40c5bb88b
As this issue is related Office, to receive better support, it is recommended to post in the TechNet Office Forum.
The professionals there will be glad to help you.
https://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro
Thanks for your understanding.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 8 Laptop Boot Issue (and other related problems)

My Toshiba Satellite S855D-S5148 laptop was bought about a month ago, but it's been giving me issues for the last week.
The most significant one was a boot issue, where out of nowhere, the PC would not start, and after a hard restart, I received an error message saying Windows was not able to start. So I called tech support and they guided me through a PC refresh. That seemed to have solved the issue until twenty minutes later, when my system froze and I could not move the cursor let alone use any applications. So I did a hard restart again, and tried to do another PC refresh until the laptop 'clicked' and shut off. I restarted again, and my system seemed to be working normally until two days later (I did not shut it off or restarted it during this period, only kept it in hibernate when not in use).
Upon trying to use my laptop, it said Windows was reconfiguring. Afterwards, I received an error message saying that Windows had to restart due to 'this problem,' though the problem was not specified. The error message included a list of file addresses that presumably contained a description of the problem, but I can't access the files because they don't show up when I search their addresses. They are .dmp and .xml files, respectively.
Is anyone familiar with this problem? I wish I could return the laptop but it's a couple of weeks shy of the return period (Staples has a measely 14-day return period, but I didn't think I'd have to use it). I don't want to go through the hassle of shipping it off to Toshiba for repairs. Would reformatting the laptop solve the problem? I wish I could attach the .dmp and .xml files to this post but I can't locate them. I'd try using the recovery disks, but they were recently destroyed in a flood.
Any comments, advice, and/or suggestions are very much welcome!

Happy to learn the hardware is fixed.
I was told they could not do so without the product key. ... Any ideas as to how I can get my product key?
Everybody should know by now that there is no product key for preinstalled Windows. The OEM has it locked into the motherboard.
As I've said over and over, recovery media will restore the hard disk to its original out-of-the-box contents. Windows will be activated.
Windows is not installed during this process. Everything on the hard drive is restored. It's an important distinction.
-Jerry

X-Fi XtremeMusic MIDI recording issues and other SoundFont issues

I am attempting to record output from the MIDI synthesis through "What U Hear", but seem to be getting periodic pops. This is while recording at 24/48 - the problem is much worse at 24/96; I get a constant scratchy noise or silence until I stop recording. Note that I am in "Audio creation mode" at this stage.
Additionally, I have found that while having 3rd party SoundFonts loaded and playing a MIDI file, I experience the following issues - missing notes and percussion and notes playing with with the wrong pitch.
Is anybody else experiencing these issues? I am using the latest 1187 drivers.
Cheers

DSM wrote:
I am having issues with the balance of the input signal from my turntable to my Elite Pro. The turntable in connected to Aux 2 with the switch on the console in the phono position. The signal from my turntable (B&O RX2) is slightly off balance with the left channel signal slightly higher than the right channel. I have attempted to use the Master Auxiliary Balance control in audio creation mode to balance the signal during recording. Unfortunatly I have not been able to make it work as adjusting the balance control has no impact on the recorded signal. I have worked with Creative and to date they have not provided a working solution. I have moved my card from one slot to another, uninstalled and reinstalled the software on numerous occasions and taken every step suggested by Creative. I have an ASUS A8N SLI Premium motherborad. Creative thinks the board may be the issue. Does anyone have any suggestions?
- old cardridge/stylus being worned out,
- weak connectors/connections,
- too light stylus pressure (try 2-3 grams),
- dirty/dusty stylus,
- mispositioned stylus (not straight, wrong 'arm'length (if adjustable),
- wrong connection imbedance,
You can also try if connecting turntable through amplifier (w/ RIAA) to X-Fi Line-In makes any difference --> shows out, if the RIAA pre in X-Fi is not working properly.
jutapaMessage Edited by jutapa on 09-05-2006 0:30 AM

Email issues (and other annoyances)

I recently "upgraded" from my reliable Bold to the Q10. I must admit I did not do sufficient research first for if I had I would still be using my Bold.
I know the "delete only on hand held" issue has been raised numerous times so all I will say here is add me to the list of really annoyed people.
I completed my first road trip last weekend with the Q1o and it was not a pleasant experience. Let me first give you the setup details:
Mobile Service Provider = Virgin Mobile
Email:
I have three Rogers accts that go to the Q10
I have one BellAliant account (nb.aibn.com) that goes to my Q10
! Have one government account that is forwarded to my Q10
I have on from my own server that goes to the Q10.
Other complication is that when I am at home there is next to no 3G coverage. This is not provider dependent - no one has coverage as I live in major dip about 5 km line of sight from both Rogers & Bell / Telus / Virgin towers.
Now when I am home on my Rogers wireless router, I can't send from my BellAliant account.
When I travelled to Toronto I was hit with the following:
Arrived at Pearson Airport, switched phone back to normal use. Received several incoming emails. When I went to answer the BellAliant ones, it would not send. It took the better part of a day to find an SMTP server that the system would work with.
My Rogers ones and my own server were fine.
Fast forward to the next day, when after having to reboot the Q10 (yet again) it decided that all my email accounts were invalid. So I proceed to authenticate them once again.
Since I had the Bell Aliant SMTP nonsense sorted out, that work fine. For my own server it was just a matter of inputting my password and hit save and it worked fine. Now comes the three Rogers accounts. When I re-input my password and it save, I received "Authentication Failed" and was advised to go to the web login and then try again. So I went to the web logon on both my laptop and the Q10 and no luck. I kept getting the same the same issue. It was not resolved until I was back at my home in New Brunswick and on my Rogers supplied home wifi that the accounts would authenticate properly.
I never had any of these issues when I travelled with my Bold, or the Curve before it. I could leave NB, travel to Quebec, Ontario, Nova Scotia, PEI travel down through the US eastern seaboard and never an issue sending or receiving emails.
So I guess the question is how the heck do I work around all this? BellAliant acknowledge that when you travel outside of NB you might (read will) have to use an alternate SMTP server. Bell, Rogers and Virgin say their systems are OK, it is a BlackBerry issue. (The loss of BIS with OS 10 and my corresponding vmobile.blackberry.com acct) Again these were never issues until the "upgrade" to the Q10
My big concern is that when I leave in a few weeks for an out of province work term of a couple of months what do i do if suddenly I lose authentication again and I am no where near which ever provider decides I am not authenticated?
Please do not suggest Gmail / Hotmail accounts they are useful, but not the solution to my problem(s). I have a business to run and customers to respond to in a timely fashion.
Any constructive comments are more than welcome.
Thanks for at least letting me rant.

My settings for my nb.aibn.com accts are:
Username is my full email address: [email protected]
server address:
pop.nb.aibn.com
port 110
SMTP username is blank
SMTP server is:
[email protected]
SMTP port 25
I know I had to be one my aibn wireless in order for to set up the first time. It doesn't like my Rogers wireless at my house. And of course Rogers doesn't like me using port 25 for the SMTP server.
When I was in Toronto I had to change to mail.1xbell.ca for my smtp server and of course when I got back to NB back to the nb.aibn.com server. You would think a national carrier would have one address that would work coast to coast.

IPad Mini Charge issue and Other

Alright so here is the deal, A couple of months ago, my apple lightning charge cord was ruined. I have had my iPad Mini for over a year now, so its not like I got it yesterday. I had not had a problem with it with the exception that sometimes videos play the audio normally but the display is like one frame per five seconds. That's besides the point, this morning when I woke up, the battery was at 9% and of course I plugged it in to charge. When I plugged it in, no ding noise to inform me its charging, no little lightning bold near the battery, nothing. nada. zip. I was just about to flip my lid, (Because this is a new charger and no where near as used as the previous) I decided to proceed to my moms room and grab her iPad mini and connect it to my charger. Low and behold, it began to charge. So, I decided, "Ok well maybe there is a connection issue." I took My iPad into her room and connected my iPad to her charger. IT began to charge.
This is extremely annoying, and I decided to connect my iPad to my computer with her cord, to grab my photos. Thinking ahead of time, to say worst case scenario that I would have to restore it or something. Alright, so I was hesitant to connect my iPad mini to my computer since last time, it put a ungodly amount of apps I had not used since three years ago and since then deleted (From my iPod Touch) along with several photos. After this had happened I had deleted the apps, but when I went to delete the photos it would not allow it. I would select and it would not give me the option to delete. Since, I did connect it to the itunes in my computer it did some funky stuff and then when it asked to back up i said "sure back it up from cloud." Cause why not right. It got about halfway through before it said "Oh there is a problem with your crap." To which I reply "Dude come onnn of all days! I just want to relax and listen to music cause I just upchucked twice and dont feel good." The iPad mini didn't care.
All joking aside, I've come to the conclusion that there is something a little more wrong with my device other than it wont charge with the charger I had just bought it, even though it had been charging with it for the last couple of months.

my laptop and my mobile is working,why not ipad mini .......sometimes the name of wifi appers and when i try to enter password of the wifi ,it says sorry unable to join the network ......what is the simple and best solution for this

Poorly Designed Lightroom and other Adobe Forums

When is Adobe going to overhaul their forums? All Adobe forums including Lightroom are painful to navigate and read. With so many great formats out there on the net not to mention Adobe's deep history of quality design software, why can't they come up with a better format? I almost never use these forums for this reason. It's very sad. Come on Adobe get us something that wasn't designed in the mid 1990's.

Not a suitable place to be commenting on the forums. You'll want to be making posts at
Comments and Announcements about the Forums.
Posting such comments here will lower the usefulness of this feature request forum...

DVD drive issues and other problems

Nothing but problems with my mac since day one. This is the reason why I went from PC to Mac to avoid all these problems.
Started with DVD drive problems. Took my computer in as they said wound need to replace the drive -and it would take a week.... sorry I can't be down for a week. Many of my businesses rely heavily on me have access to my computer.
There have been many small glitches since then also. Some times the display wont come back on after I have closed the lid and re-opened. Only way to get it working again is to do a manual restart.... and sometimes that doesn't even work.
<Title Edited by Host>

I forgot to mention that I have also cleared my PRAM (a few times) -- so that's probably not the culprit.

CC Interface - CSS Designer Panel and Other Panels - do not close

I do not know what I did, but if I am in Code, Split, Design, or Live view the CSS Panel I have docked on the right does not minimize. It used to but no longer. I did not explicitly change any preferences. I just know it is something simple but I am stumped for now.
Anyone have any suggestions?
Thanks!
Jerry

Hi Jerry,
Did you try resetting the workspace in the application toolbar?
Please read more about customizing the Dreamweaver workspace
http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7f82a.h tml
Else you can try resetting preferences for Dreamweaver as well.
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
Thanks
Bhawna Gupta

Ios issues and other questions

Hello!
First of all i would like to thank resdesign, zaxist and all of the dev team for helping here.
Second, i'm not good at coding and most likely i have used all of the bad practices possible here so continue at your own risk
Anyway, here is the page i've made in edge:
http://www.nocomprendo.ru
this will change soon, so if you want to see the version at the time of this post - please go here:
original (unstable on ios6/ios7): http://nocomprendo.ru/test1/america_test.html
no maps (unstable on ios6): http://nocomprendo.ru/test2/america_test.html
no maps and svg-s (stable): http://nocomprendo.ru/test3/america_test.html
you can download source file here: http://nocomprendo.ru/test1.zip
Most of the code is in stage's "composition ready".
It uses a instafeedjs to embed instagram (which is working stable and is easy to implement) http://instafeedjs.com/
It uses fbwall to embed facebook (which is laggy, outdated and i would not recommend it) http://www.neosmart.de/social-media/facebook-wall/
It uses external fonts which can be generated here http://www.font2web.com/
and the loaded to adobe edge. tutorial here: http://www.youtube.com/watch?v=a76Exc8NcqM \
(be sure to remove an .svg file!!!)
Not always legal, though if you need cyrillics (which is a pain as adobe webfonts have only three or four cyrillic fonts) it is a solution.
I would most likely embed wordpress to load some more external content anytime soon as i did it on another project, though i dont know how to do it from inside of edge and i would have to edit the files manually. (i would appreciate any links to tutorials)
Concerning the stability of the edge websites:
embedding of google maps (both old and new API) causes ios iphone/ipad safari and chrome to crash (ios6, ios7).
perhaps the nature of it is in huge iframes i am using. any ideas?
use of any svg files also causes ios iphone/ipad safari and chrome to crash (more likely in ios6 less likely in ios7).
this was mentioned several times on the board and seems like it is not solved yet.
I have questions on making advanced preloaders with percentage bar. (i have seen zaxist's thread) but is there any walkthrough on embedding any javascript preloader like these:
http://codecanyon.net/item/percentage-preloader/5523389?WT.ac=solid_search_item&WT.seg_1=s olid_search_item&WT.z_author=CodingJack
Also, current preloader option available in edge replaces the white screen before loading composition, but everything that happens in composition ready is seen by website visitor and looks odd. Shall i use creationcomplete or anything else instead?
p.s. yeah, its me going down the south america on a motorcycle, so if youre interested you may follow me in facebook or instagram

still relevant..

Audio (and other) problems noted with Keynote version 4.0.1

Since installing Keynote 4 and the 4.0.1 update, I have noted the following situations and/or problems:
1) When doing a "save-as" the filename is appended with the suffix ".key" but when I subsequently "save" this file, the suffix disappears. The file seems to open and operate OK nonetheless, but this puzzles and somewhat concerns me that someday Keynote may not recognize the file. This happens whenever I "save" a slideshow after I have made any changes to it.
2) When playing back a "soundtrack," the audio "glitches" frequently at slide transitions: this occurs repeatedly on my G5 desktop system but not on my MacBook Pro-17. The "glitches" always seem to occur at the same places in the track - which, of course, is also at the same slide transitions. (This problem has spawned several similar questions and threads in this forum.)
3) Related to #2 above, the "glitches" also interrupt or corrupt the "recording" of that soundtrack, so that the synchronization is off when the slideshow is played back.
4) If I want to have an audio track play under a series of slides, the only way I have found to accomplish this is to create a separate slideshow with the audio track running as a "soundtrack" and "record" the Builds and Transitions in sync with the audio. If I want to incorporate several of these shows together, I can create a "master" slideshow and Hyperlink each segment to the next. HOWEVER...
5) When I "record" a "soundtrack" and "synchronize" the Builds and Transitions within the slideshow, everything plays back properly in sync ONLY when the slideshow is played as a stand-alone presentation (i.e. a cold start from the desktop). If I initiate playback of the slideshow via a Hyperlink from another presentation, the soundtrack plays but NONE of the synchronization works at all.
6) The only way I have found to have an audio track "fade-in" or "fade-out" is to use off-line editing software to record these fades prior to importing the tracks into Keynote. The "Start Audio" Build function is simply a hard "cut" in, and the end of the track is a hard "cut" out.
These problems are consistent and repeatable facts. Whether they are "bugs" in the software or "design shortcomings" is uncertain. Nonethtless ...
At the risk of offending the moderators of this forum, I feel compelled to comment that these problems render the audio operations of Keynote less than satisfactory and should be addressed as soon as possible with another update to this visually stunning but audio-challenged application.

Well Ron S, I re-confirmed why I prefer not to look to tech support for support.
It seems to me that support's main function is to deflect any critical comments and push the blame back to the user.
Frankly, I have better things to do with my time and money than try to help a multi-billion dollar enterprise learn about itself.
So, for the benefit of you and the nearly 400 who have followed this thread, I offer you my latest and probably last attempt to have Apple acknowledge in some small way that "Houston, we have a problem".
I expect this reply will result in this thread being yanked as well, since I'm expressing negative thoughts about Apple's product and wishing they would do better, which is a non-technical gasp of utter frustration and disappointment. Note that "product" is singular, defining Keynote. My other Apple products serve me loyally and superbly, which is why my huge disappointment with Keynote.
So here is my correspondence with Tech Support. I've removed names except mine.
I think it speaks for itself. They have notes from my conversations with them that I have current Apple computers, including a MacBookPro, not an old PowerBook, nevertheless, they have told me that the problem is mine because the fabulous hyper-performing Keynote software is choking my poor old machine (paraphrased muchly).:
Hi (support),
That's disappointing news, especially since this test was done on 3 machines: an old G4 400, a 2.0G Dual G5 and an Intel core duo MacBookPro which yielded identical results.
It is not a hardware issue.
I do not accept a brush-off that it is my hardware that is causing Keynote to be problematic.
I will assume that Apple is not interested in addressing these issues in public and that Keynote is substandard software that is in need of re-authoring.
Sorry to be so blunt, but Apple has set this tone with Keynote, and used its considerable reputation as a leading a/v technology innovator to imply that Keynote will deliver the excellence we Mac users have come to expect.
I have been a loyal mac user since the SE series and have enjoyed success with the machines and software offered by Apple, and depend on them for my livelihood. I'm currently using FC Studio6 and know that Apple is capable of maintaining its high standards.
However, Keynote fails to do that, instead behaving like a product that was invented in a teenager's basement and is in beta. I realize that it's not designed as a FCP level product, but it fails at the basic tasks that you advertise it will complete.
A version 4 product should work as advertised. Keynote certainly does not.
I'm deeply saddened that Apple seems to have become an iPod entertainment company, interested mainly in profits from entertainment rather than serious useful technology.
On 2007-Oct-19, at 10:14 AM, (tech support) wrote:
Hello Sir,
Unfortunately, this does look like it's mostly a case of some of the new Keynote features slowing down the performance on the PowerBook.
At this point, there isn't much else we can do in the way of troubleshooting.
If you are not satisfied with the performance on the PowerBook, using the previous version of Keynote is probably his best option at this point.
We will continue to research this issue, but at this point it's unlikely I'll be able to find additional suggestions for improving performance, as it looks like it is is reproducible and limited to older models.
On Oct 16, 2007, at 11:27 PM, Ron Tucker wrote:
Hi (support),
Thanks for your recent followup calls. I'm directing a video shoot so am a bit preoccupied.
Here are the tests I mentioned.
These are as simple as it gets, and I think highlights the synchronization problem with Keynote.
Test 1 is straightforward, and demonstrates that a single unedited recorded audio track will maintain mouse click synchronization.
Test 2 is the same file, but with audio modifications applied to each slide in succession.
This demonstrates a dramatic synchronization slippage.
The visuals occur before the click (and audio) markers. Keynote seems to be create delay in audio at each "record and replace" point. This accumulates as the audio is revised in successive slides.
These tests demonstrate that there is a fundamental flaw in how Keynote handles audio in its most basic application.
This does not address the slim toolset available, such as lack of insert capability and other basic audio tools, which is a separate design issue, and I suppose subject to "request for enhancement" feedback.
I've reluctantly abandoned Keynote for my project work at present until these basic issues are addressed and it can be demonstrated that Keynote can successfully execute its feature set.
<TuckerKeynoteTest.zip>
Message was edited by: Ron Tucker1

Cannot map roles other than Project Administrator and SOA Designer

I've installed PS4 HC FP Stage 3 on Windows, and I have seeded the demo community users. When I use Business Process Workspace to map roles to these users, the only roles available to me in the Select Role list are Project Administrator and SOA Designer. I was expecting to be able to map far more roles, thus:
* mtwain needs the Project Creator, Designer, Deployer, Project Documentor, and SOA Designer roles.
* jcooper needs the Designer role.
Any idea what's wrong?

I would like to know also. I have made many DVDs, but the number order does seem to be random. For presentation purposes I want to play a specific clip by hitting it's corresponding number on the DVD player remote when the DVD is at a complete stop (so if I put the movie clip in the 2 spot and hit the number 2 on the remote, then the 2 movie clip will play). I can get this to work from the menu by dropping them in iDVD in the order I want and waiting for each to encode before dropping the next, but at a complete stop I cannot ensure number 2 on the remote will play number 2 on the DVD. To me it looks like iDVD gives those numbers in the order in which the audio is encoded when burning, with the shorter clips first and longer ones last.
Can anyone help me?

SOA Design issues and other politics

Similar Messages

Maybe you are looking for