Sold machine serial number showing in Stock

Dear Experts,
At the time of outbound delivery serial no is not assigned to material so it is not get consumed for that particular customer.
In IQ03 serial no is assigned to plant & storage location & the status is ESTO.
So after doing PGI, stock of material get reduced by 1 qty but serial no is still open. Now I want to consume this serial number. How to do the same?.
Thanks in advance.
Trupti

Hi Sudhir,
In VL02N go to <b>Menu path Extras > Serial number</b>. This will cause the Maintain Serial Numbers pop-up box to appear. Enter the serial number in the Serial number field. Click Enter
http://www.eitoolkit.com/tools/change_management/et_tools/16_end_user_training_task_guide.doc
In the above link refer page numb 7.
Hope this helps.
Regards,
Mani .

Similar Messages

Model 3000 N100 - Machine Serial Number is Unknown in Lenovo Care

Hi,
My mainboard was warranty replaced earlier this week. Since then, Lenovo Care shows an unknown Machine Serial Number in Lenovo Quick Links (System Information) and the Advanced tab. The correct serial number and machine type is displayed in the BIOS.
Thank you in advance.

Nilesh
I bought a used N100 and did a total upgrade.
CPU, memory, HD, new screen, new battery.
I regret it! I should have bought new, as it cost
me the same or more as new. I just got carried away.
I did the upgrades myself, so no cost for "service".
All parts were bought on ebay or newegg.
Cost from Lenovo would be MUCH more.
I do not know how much new laptops cost in your area,
but I recommend you buy new, or limit your upgrade
to only what you need most.
Duck3

Table to find serial number for the stock of a material

Dear All,
I have a requirement in which i want to find the serial number for the stock of a material.
in Equi i have serial number with material.
But i want it with plant also.
pl. suggest me in which table u have serial number,material , plant and storage location.
Regards & thanks,
Vidhya

Thanks kesav.
I checked EQSE table in that no entries are found.
In EQBS table for that equnr u have plant and storage location.
but the performace while selecting EQUI on the whole will be very slow.
so i want a table with material,serial number,plant and storage location.
kindly suggest.

Matching Machine Serial Number to a Asset Tag

Is there a way to take the machine Serial Number (From System Profiler possiblely) and match it to a file that has Serial Numbers and Asset Tags from a inventory database?
1. Define Serial Number through System Profiler
2. Scan File with Serial Numbers and Asset Tags which are tied together.
3. Once match is made the Asset Tag is known
3. Make the Asset Tag a environment variable.
G4 1.42 Mac OS X (10.3.5)

You don't define the format of the file that contains asset numbers and serial numbers (and I think the 'tie together' is making it sound harder than it is.
In any case:
1. Define Serial Number through System Profiler
system_profiler will tell you this. You can ask for the specific hardware information, then parse out the serial number, like:
/usr/sbin/system_profiler SPHardwareDataType | awk '/Serial/ { print $3}'
2. Scan File with Serial Numbers and Asset Tags which are tied together.
Without knowing this file format it's impossible to tell how to do this for sure, but if the file was a simple tab-delimited file of asset number<tab>serial number, then:
awk '/<serial_number>/ {print $1}' /path/to/asset_file
You can now string the two together, like:
#! /bin/sh
SERIAL=`/usr/sbin/system_profiler SPHardwareDataType | awk '/Serial/ { print $3 }'`
echo "Found serial number ${SERIAL}"
ASSETNO=`/usr/bin/awk "/${SERIAL}/ { print \\$1 }" /var/tmp/assets`
echo "Found asset number $ASSETNO"
export ASSETNO
Note the user of double-backslashes in the second awk to overcome shell expansion issues.

Good receipt with serial number already on stock W

dear all,
I have this issue:
Company "A" sent a material (with serial number) to another company "B" in SAP (Intercompany flow) with customer consignment stock (W).
Company B has to post the good receipt for that material but the system shows the error message that the serial number can't be used.
My question is:
is it possible to post the good receipt for a serial number already used in another plant, special stock W?
Thank you
Enrico

Sorry jurgen:
Serial number 1000152198 cannot be used here
System status ESTO is active (EQU 1000152198)
Thank you
Regards
Enrico

HT201413 guys, my iphone 4s is not working. i already updated the software, tried to restore but appears an error (1) over and over again. anda also, my serial number shows as n/a. please help.

Guys,
my iphone 4s is not working. I tried to restore it but an error (1) message appears over and over again and No serial number is display, shows as n/a in itunes.
my serial number is C38HGK63DTD2
please help
Regards
Manuela Costa

Error 1 indicates a serious hardware failure. Take the device to Apple for evaluation.

Mismatch between serial number masters & its stock

Hi,
For a plant A000 and storage location 0001, when i execute MMBE i am finding stock as 1 in un-restricted stock.
But when is check iq02 and check number of serials exist for the Material Master, i find 3.
Could some one tell me why there is a mismatch
Regards

Hi,
This difference will come when the user creates new serial numbers during the goods movement, for example lets say if the current stock is '3' and user issued some '2 quanities for consumption. While issuing the materials if he used the option 'create automatic serail numbers' function instead of taking the serial numbers from the existing stock, then the system creates new serial numbers and issued with the stock quantity. Because of this, you will see the current stock as '1' with three serial numbers.
Actually the system should not accpet the newly created serial numbers for issues when your settings are correct.
Please check the serial number usage for the serial profile used in the material master in the below SPRO settings
Serial number usage is defined at two places in SAP-PM under IMG activity as shown below
First stage: IMG-> Plant Maintenance & Customer Service - Master Data in PM & CS - Tech Objects – Serial number Management- Define Serial number profiles
Then go to the serializing procedure and see the serial number usage for 'MMSL'. It should be '03'.
Second stage: IMG-> Plant Maintenance & Customer Service - Master Data in PM & CS - Tech Objects – Serial number Management-> Define Serialization Attributes for Movement Types
Select the “define flow type groups”
Here also, the serial number usage should be '03'.
Let me know if you need any more help.
Regards
Vijay

Serial number for non stock material

Hello,
I would like to create a serial number for a non stock material (material type NLAG) (PO with account assignment catergory K) and I receive the following error message during the goods receipt (transaction MIGO) :
*Movement type 101 does not currently support serial number management*
*Message no. IO306*
*Diagnosis*
**With the help of * under the business operation, the entry in table T156S used here under movement type 101 defines that no serial numbers are supported here.**
*System Response*
*Termination of the transaction called up.*
Is there somebody who can help me with this problem please ?
Thanks a lot in advance for your help.
Kind regards,

Hi,
I'm not familiar with Serial Number Management but I guess you can apply it only to materials with stock.
http://help.sap.com/saphelp_47x200/helpdata/en/dd/f8c814b3f911d1896e0000e8284931/frameset.htm
(no non-stock materials are mentioned...)
BR
Csaba

G5 System Wont display the machine serial number.

i just bought a referbished G5 dual 2.0 ghz. and the "about this mac" window wont display serial number. i even downloaded tools like "OnyX" to display system info. the srial number stays blank. it also does this in the system profiler. what do i do? and how do i get serial number in the software?

Hi ijny9956,
If the machine is refurbished, it may have had its logic board replaced post-manufacture. When logic boards are replaced, they usually do not have the serial number re-programmed into them. Apple have a utility to do so, but it seems they do not distribute it. (Except they leave it in repaired systems sometimes - http://lists.apple.com/archives/Darwin-userlevel/2005/Mar/msg00005.html )
You can find out the serial number of your system by opening the case side and looking at the bottom of the case.

**Batch managed and serial number managed partial stock bin 2 bin transfer

Hi Experts,
I have my stock which is batch managed and also serial number managed. Now if i want to perform partial stock transfer from one bin to another i use LT01 with movement type 999 i am able to see the batch (suppose i just want to transfer material 1 of batch # 100). This batch # 100 has 10 materials with different serial numbers. But when i use LT01 i can see the batch of the material but not the specific serial number of the material that i am transferring.
My question----- Is there any specific transaction where i can also see the serial number of that material that i am transfering to another bin or is it some thing that needs to be customized?
Regards
Albert

Hi ,
Just check with Tr.Code : 'IQ09'
There are many options available.
Regards
R

Machine Serial Number

Hi,
I would like to programmatically find the Serial Number of a Sun Solaris box. I know it was not possible earlier but am curious if Sun has added any new command/tool to find out the serial number of a machine.
Is there any roundabout way of finding it?
Any help would be appreciated.
Thanks in advance,
Nimish

Some of the new Sun hardware has machine-readable serial numbers, but they generally are not (yet) easy to access. Most of them are available on the System Controller or from the ALOM (Advanced Lights-Out Management). Some have it in the FRUID data from prtfru.
There is a new tool from Sun called "SNEEP" (Serial Number in EEPROM) which, once you have the serial number, will make it easy to get to when you need it, and will keep serial (and other) data safe .
It's very easy to use and very flexible for storing and retrieving serial and other data that you want to associate closely and permanently with the hardware. [ asset information, location, contract, serials for attached storage, whatever you want ]
You can download sneep from the Sun Download Center at http://www.sun.com/download/products.xml?id=4304155a
Documentation is also available for download there.
Sneep provides a simple interface, preserves the data even if the eeprom is erased, and even updates the serial number for you in the explorer configuration.
If you've already made the effort of putting the serial into the explorer (or CST) configuration, sneep will pick it up from there automatically.
Right now, sneep doesn't have access to the serial data in the ALOM or SC, but sneep will be updated to pick up this information whenever possible, so that you can use the same mechanism to handle serial and other information on all your Sun systems.
It runs on SPARC and x86, and although the x86 doesn't have a true EEPROM, it still has a lot of value. Solaris x86 is getting support for reading the serial from BIOS, but not all manufacturers provide the data to the BIOS.
At worst case, you enter it manually once, and sneep will protect it and keep it handy.

Just purchased Photoshop Elements and the serial number shows as invalid

Whenever I enter my serial number a message appears : "This serial number is not valid for Adobe Photoshop Elements 12"
How do I solve this? The live chat has not been working as well so I don't know who to contact about this issue.
Thank you!

Hi,
The original poster or yourself gave no indication of which operating system you are running on.
Around the time of the original post there was a problem with the Adobe server and a note was put out which may have answered the original posters problem.
You don't tell us anything about your problem - any error message?
By the way, this is a user to user forum where other users try to help - Adobe staff only occasionally look in.
Brian

Upgrading to PSE12, serial number showing as invalid - still an issue?

Have purchased upgrade to PSE12 and entered my PSE6 serial number but Install indicates that this is invalid. MAC user. No response on the one-to-one Adobe Chat, which is disappointing.

You may have to check the online reseller directly and ask about this matter.
And note they have a different policy of returns and exchanges than Apple
itself. A retail Apple Store or the Apple online (company) store is different
than an authorized independent retailer who resells product. So you should
check with them about a return or replacement. They may also be able to
figure out why they sent you a product that cannot be officially verified.
Good luck in this matter...!

Why is my macbook pro serial number showing as invalid

I have just bought a new 13" retina display Macbook Pro from an online seller. Trying to check it out, apple's website says the serial number is invalid. What the **** have I bought?!

You may have to check the online reseller directly and ask about this matter.
And note they have a different policy of returns and exchanges than Apple
itself. A retail Apple Store or the Apple online (company) store is different
than an authorized independent retailer who resells product. So you should
check with them about a return or replacement. They may also be able to
figure out why they sent you a product that cannot be officially verified.
Good luck in this matter...!

Recently bought new iPhone, but serial number shows it is 6 months old?

I can't figure this out.
On April 2nd 2008, I bought a new iPhone, in the shrinkwrapped black box, from an Apple store. But I have just realized that that serial number on it, starting with 7W743, means it was manufactured in October of 2007. It also had the latest 1.1.4 firmware.
I can't believe this phone was somehow sitting around unsold for 6 months (and if so how did it get the latest firmware)? And I don't think it's a refurb since it wasn't in the white box and they didn't say anything about it being a refurb. Does anyone have any idea how this might happen?
Thanks for any ideas.

What difference does it make when it was manufactured? It was brand new in a sealed box with the latest firmware installed. You have full warranty to cover you if anything goes wrong. If you want a little more piece of mind, get AppleCare for it.
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'
Disclaimer required by Apple Discussions Terms of Use: Mac611 may receive some form of compensation, financial or otherwise, from my recommendation or link.

Sold machine serial number showing in Stock

Similar Messages

Maybe you are looking for