Solman_setup - Solution / Logical Component

hi,
I just completed Solman 7.1 upgrade. Currently working on solman_setup. Just realized that the at start the "Specify Solution", it by default used another Logical component and Solution. However, we are using another logical component/solution in all work center applications.
Need some help, if this is possible to reassign the logical component/solution so that the solman_setup are applicable to another one?
Can it be possible / should necessary to Redo the solman_setup?
Would appreciate your feedback.!!
Thanks,
RajS

Also under the trans  SOLMAn_SETUP //  
You have to "simply" run again in solman_setup all activities that are
flagged as "Update Needed" (for System Prep & Basic Config).
Concerning the Managed systems, mainly (as far as concerning RCA) the
solman_setup -> Managed system configuration doesn't need to be
re-executed.
Best Regards
Jai Wardhan

Similar Messages

  • XI 3.0 and BW 3.5 system type/logical component in Solution Manager

    We are in the process of performing an upgrade for ERP 2004, XI 3.0 and BW 3.5. Initially this is being done in the sandpits. All systems are configured and connected our Solution Manager to download the packages.
    We are unable to determine what type of system the XI 3.0 and BW 3.5 should be configured under. For example, previously we had an issue where ERP was configured as ECC 5.0 rather than ERP 2004. This was causing an issue in MOPZ where the upgrade option wasn't visible in a maintenance transaction. The same issue is now happening for XI and BW.
    Please advise on the system type (logical component to use) for XI 3.0 and BW 3.5 in Solution Manager as SAP have made it very confusing. Currently both are under type Netweaver 04.
    Regards,
    -Rohan

    Hi
    I believe that SAP hasn't upgrade option for BW 3.5, Check link:
    https://service.sap.com/solman-mopz
    Upgrade
    a "straight" upgrade for SAP Business Suite (upgrade from SAP ERP 2004 to SAP ERP 6.0, for example) is not supported by Maintenance Optimizer
    Upgrade with an Installation of an Enhancement Package is supported for SAP ERP, SAP SCM, SAP SRM and SAP CRM
    Regards
    William Neira

  • Solution Manager - Logical Component for SAP Netweaver EHP2

    Hello,
    I installed the newest SAP Netweaver Ehp2 (with usage type AS ABAP only) for a future integrating with BI_CONT (SAP BI requirement). So... what I want to know is... I want to do an update of support packages to the latest Stack (SPS) and in this product version (NW EHP2) the latest stack is stack 06 !! But I ´m facing with a problem which is, because I have to maintain this system in Solution Manager (for Maintenance Optimizer activity)...so what I want is configure this new system on Solution Manager Ehp1 (with SPS 23) but in tcode SMSY I didn´t found this Product in Logical Components for I can apply this system to my Solution... I only see SAP Netweaver with EHP1 and not with EHP2 which is the version that I want to apply this new system. (This is mandatory task, because without it, I will not be able to download the support packages for NW 7.0 EHP2)
    Tell me two things... first if this level version of Solution Manager that I have here (SPS 23) have this product in logical components, and two... if not it, is necessary to raise the level of Solution Manager support packages (to latest stack SPS 25) for I can see that logical component SAP Netweaver EHP2?!
    Thank you very much
    João Dimas - Portugal

    Hi João,
    You can verify if the EHP2 is available (if) in your system, this can be done once you are in SMSY -> Product Definitions -> SAP Netweaver where you should able to see the EHP2. If so, then it's a matter of marking the leading Product & Product Version under the Header Data ->Change Product Assignment where you can use the drop down arrow to select the Product and Product Version. If it's not available, then by checking the 'Free Product / Select Product Version' then use the drop down arrow to select the product & Product Version, once you selected that then click on copy and mark that as active and save.
    Then you need to create a new logical component in System Group & logical Component under SAP Netweaver, then assign the system to the logical component. Once this is done you can use the logical component in a solution and create a maintenance transaction.
    I hope this help you to proceed further, thanks.
    Jay Soma.

  • What is a logical component & Solution

    Hi gurus,
    I have a very basic query on Sol Man terminology.
    1. Logical Component - what is it?  Why its used?  What is its relevance to the satellite systems I would add to Sol Man system?
    2. What is a Solution?  How is it related to the satellite systems?
    Any help would be help.
    Thanks
    Abdul

    Hi Abdul,
    A logical component is a placeholder for a true component in your system landscape.
    For instance SAP R/3.
    To this logical component you link your satellite systems with their details.
    For instance Dev SAP R/3 Client 100, Production SAP R/3 etc.
    The logical component you use everywhere you need to reference your R/3 system.
    This way, if your actual R/3 satellite system location or version changes you only have to change it in one place.
    A solution contains the systems in your system landscape. Which systems you combine in one solution depends on your business processes. All systems that are touched by your business processes are combined in one solution. The business processes refer to the satellite systems through the logical components.

  • Logical component in Solar02 transaction

    Hi,
    When i run solar02 transaction in solution manager.I get the project screen, but the logical components for the various processes is showing a wrong component. I need to manually change the logical component everytime.
    Is there any way that the logical component column shows the right component automatically??
    Thanks,
    Visshwas

    Hi,
    Does the Log comp assigned to the project is correct?

  • How To create a maintenance project - logical component missing?

    Hi experts,
    we plan to activate ChaRM in our Landscape.
    We don't have created a maintenance project in solution_manager cause there is a logical component missing.
    I followed the instructions of the tutorial on  https://websmp206.sap-ag.de/~sapidb/011000358700006932702005E.sim (Creation of a maintenance project).
    I recognized there is the logical component "ZCHANGE REQUEST MANAGEMENT" missing.
    This seems to be a modified origin SAP Component.
    Does anyone know where to find these component?
    Maybe with informations what has to be changed for the Z*copy or is this only a 1:1 copy?
    Does anyone have a detailed document for configuring ChaRM on SolMan 7.0 (Mailadress is visible on my business card)
    thanks in advance
    kind regards
    Thomas
    Helpful answers/documents will be rewarded, surely!

    You need to set up your solution and therefor define a logical component in SMSY. For instance the logical component might consist of your ERP E, Q and P systems.
    This logical component is added to an SMI Project. It basically tells the SMI project which systems are involved in the process. After that you will have to create an IMG project, CTS project, release the SMI project to the Change Request Management and generate Maintenance Cycle and Task List (this is all being done in SOLAR_PROJECT_ADMIN).
    /cheers

  • Managing more than one logical component in SMSY Current System Assignments

    Hi,
    I have a problem with managing logical components in TA SMSY in my Solution Manager System, in the section "System Groups and logical Components". I want to maintain more than one logical System e. g. from Type Application Server ABAP --> SAP NETWEAVER APPLICATION SERV.
    That means e. g. i want to maintain 2 or more Demo Systems from different Servers or Instances of the same Product Version in the same logical Component .
    What I want to know is, is there a way to display these logical components in tne  "Current System Assignments" - View in that form
    Logical Component is e.g. : SAP NETWEAVER APPLICATION SERV
    product/main instance is   : SAP NETWEAVER [Application Server ABAP]
    Product Version | Development System | Demo System | Training System | Production System | ...
    |--|||--
    |
    SAP NW 7.0        |                                         | ZB1: 100           |                               |                                     |
    |--|||--
    |
    SAP NW 7.0        |                                         | ZB2: 800           |                               |                                     | ...
    Thanks beforehand for your help.
    Greets C. Peifer
    Edited by: Carsten Peifer on Dec 15, 2008 4:03 PM

    Thanks for your quick answer,
    but i have to say, that this is not exactly what i've been lookin for.
    What I need in my System Landscape is to have each demosystem as a logical Component from the same type (e.g. SAP NETWEAVER APPLICATION SERVER ABAP).
    So that in Change Management in a Maintenance Optimizer Transaction i can choose between each demo system in my System Landscape (from the type SAP Netweaver Application Server ABAP) that i will maintain in Maintenance Optimizer, e.g. download a new SP Stack.
    My Intention is to create new logical components from type  SAP NETWEAVER APPLICATION SERVER ABAP in my Namespace e.g. ZSAPNW01, ZSAPNW02, ... and to maintain the types of systems (Demo, Development, Training etc ...) for each logical component.
    Is this the only Possibility?
    Or do i can also display my logical components the way i descriped beyond?
    >
    Product Version | Development System | Demo System | Training System | Production System | ...
    |--|||--
    |
    SAP NW 7.0 | | ZB1: 100 | | |
    |--|||--
    |
    SAP NW 7.0 | | ZB2: 800 | | | ...  

  • Monitoring "check aborted jobs" not possible - Logical component issue?

    Hy Experts,
    we are facing a problem setting up system monitoring in our Solution Manger system.
    We want to check if a specified job is finished sucessfully - if it is aborted we want to receive a mail.
    In another system the monitoring as described is fully functional.
    In this scenario we are facing a problem:
    Error Text:
    The logical components SAP NW REDWOOD CRONACLE and Z_SYS_MONI have different products
    Message no. SOLAR170
    Diagnosis
    This component change can prevent the processes and scenarios which you have copied from the BPR into the "Structure" tab, in transaction SOLAR01, from running in the assigned system, or assigned transactions, IMG activities, etc. may not exist in these systems. For example, transactions or IMG assignments copied into the previous product context do not yet exist in the project.
    If the same systems are assigned to the new and old logical components, the change is not critical.
    System Response
    The system sends a warning and accepts the change, but no data is automatically converted or adjusted.
    Procedure
    If you are unsure whether your assignments will still be in the component systems after the component change, perform the function "Environment - Refresh Buffer" in the transaction SOLAR01. Errors in this program are objects which do not exist in the system.
    Actual product of the logical component "Z_SYS_MONI" is ECC5.0.
    The other (working) is using the logical component "SAP NETWEAVER APPLICATION SERV" instead of the above used "SAP NW REDWOOD CRONACLE "
    How can this error be fixed OR
    How to monitor jobs with logical component ecc5.0?
    Any help will be rewarded!!!
    Thanks in advance
    Tom

    Detailed Info:
    The working solution is assigned to ECC 6.0 AND to SAP Netweaver 7.0 (2004s).
    The selection in business process repository - it-platform - monitoring is assigned to SAP Netweaver 7.0. -  but we have ECC5.0 - even if I create the system/logical component new under Netweaver 2004 (6.40) it won't work
    It seems not to be possible.
    But how to monitor a job in ECC5.0 - think it is possible.
    Any ideas?
    Please help!
    OK
    Seems not to be possible!
    Set to solved - but this is not the way to solve problems dear SAP
    Edited by: Tom on Dec 5, 2008 9:59 AM

  • No monitors pulled for self defined logical component

    Hi,
    I have defined a system landscape in smsy and created solution landscapes in the sm. For some systems I had to create a new logical component.
    My problem: Although RFC destinations work fine, for all systems within the new logical component no monitors are pulled out of rz20.
    If I use a SAP-defined logical component it works.
    I use Solution Manager 3.2.
    Is there any documentation for this problem or does anybody know a solution for this?
    Thank you and best regards,
    Tim

    Hi again,
    I thought about the problem and tried several things. The problem is not the self defined logical component. The problem is the product definition. I can`t monitor systems, which I created as product SAP ERP in smsy. The check "SAP System ..." doesn`t appear when I want to setup System Monitoring.
    Does anybody have an idea what I do wrong?
    Regards,
    Tim

  • SAP Delivered Logical Component Inactive, SAP CRM 5.0

    I would like to use the SAP CRM 5.0 Logical Component as Delivered by SAP. The systems are already upgraded but I cannot seem to Acitvate this in transaction SMSY. CRM SERVER 4.0 is active and can be used.
    Anyone have any ideas?

    Hi Romina,
    Yes you can install it later not just for CRM but for any SAP Solution from the Business Suite or SAP NW04s.
    You have to start JSPM and select Install Additional Usage Type and select JCRM.
    Make sure after you install the new type to check your software components
    http://HOST:5XX00/sap/monitoring/SystemInfo. to see if all your components are in the correct stack.
    Best regards,
    Juan Jose Alvarado

  • Error: The logical component X is still being used

    Hi,
    In Transaction SMSY, i want to delete a Logical Component. So, pre-condition is to check whether it is mapped to any Projects/Solutions. By right-clicking - Where used list , i have seen that it is mapped to a Project. So, in transaction SOLAR_PROJECT_ADMIN under tab System Landscape, i tried to delete the Logical Component but receiving the error message - The logical component X is still being used.
    Please help.
    Many Thanks,
    Mohan.

    Hello Mohan,
    You can also solve this by using the "Replace Logical Component" button in the system landscape within SOLAR_PROJECT_ADMIN.
    Thus you can replace all the occurances of the Z_ logical component by e.g. an existing standard SAP logical component.
    Afterwards you will be able to delete your Z_ logical component in SMSY (or in LMDB from 7.1 SP9 on).
    Best regards,
    Peter

  • Change logical component  for upgraded satellite

    Hello.
    After upgrading a satellite system from 4.6C to ECC6, I would like to to change the Logical component in SMSY accordingly. But cannot find an easy way to do that. I would like to keep the actual monitor, alert and reactions configuration in the current solution, and just update the Logical Component.
    Actually I am afraid that I have to cancel the system, and recreate it under the new component missing all the settings.
    Does anybody know if there is a non destructive way? I'm working with a 3.2 Solman.
    Thanks a lot, kind regards,
    Dino

    Try manually setting it, or change the leading product from R/3 to ECC

  • BPR - Selecting 46c/47 processes from BPR in ERP EHP logical component

    Hello,
    We have a project which will be used SAP ERP EnhP 5 for the project.  So we have defined a logical component in SMSY with that product and version Z_ERP_EHP.  Then we assigned it to the project in Solar Project Admin
    When we are working in Solar01, and select a process (i.e. Accounts Payable) which says that it is valid for 4.6c on, however it is not associated to the Z_ERP_EHP logical component but tries to associate it to SAP R/3 logical component.  It seems that SAP ERP EHP is not recognized as a successor of 4.6c.  Then we have to reassign the process /process steps to the the Z.. logical component.
    Am I missing something?
    Esteban Hartzstein

    Hello Volkner,
    Thanks for your answer.  To continue with you explanation, for the meantime, though I only use Central Application instance in the ERP EhP 4, I should be definying two logical components, one just for SAP ERP product and the other for the EhP, both pointing to the same landscape, so that I can correct select BPR processes.
    Moreover, for each industry solution (IS OIL, Retail, etc.) I need to define different logical components.
    I appreciate your input.
    Regards
    Esteban

  • Problem to assign my SolMan 7.1 in the corresponding logical component

    Hello,
    I am running SolMan 7.1 SPS 11.
    I would like to assign my SolManSID to the logical component SAP Solution Manager 7.1.
    I perform the following.
    SM_Workcenter
    -> Solution Manager Administration
    -> Landscape
    -> Logical Component
    -> Search *manager*
    The only Logical Component that is returned is  SAP SOLUTION MANAGER 7.0 EHP 1.
    There is no SAP SOLUTION MANAGER 7.1.
    Therefore how should I proceed to add my SolManSID to the logical component SAP Solution Manager 7.1?
    Regards,

    Hello,
    Prav D wrote:
    Hi,
    Check sapnote : 1850819
    Also go through following url :
    http://scn.sap.com/docs/DOC-49413
    http://help.sap.com/saphelp_sm71_sp10/helpdata/en/7a/96449e84b74121a323dcfdc8e2a7be/content.htm?frameset=/en/7a/96449e84b74121a323dcfdc8e2a7be/frameset.htm&current_toc=/en/35/2cdf53fec54bcbb0146f6f8f5ad408/plain.htm&node_id=27
    Thanks & regards,
    Prav
    1. SAP Note 1850819 was read but nothing helped me solving my problem.
    2. DIc-49413 does not apply has I would like to make a new assignment.
    3. Even after reading the help I could not make my assignment. The only proposed logical component does not contain Solution Manager 7.1
    as I have described above.
    Please answer my question or provide me the exact sequences to perform if you would like to help me.
    Regards,

  • Logical Component for HANA DB system

    Hi Friends,
    I am doing Managed System Configuration for HANA DB system.
    I have created Logical Component for the same, but I am unable to put it in Solution(in SMSY).
    Can some one suggest.
    Thanks & Regards,
    Solman Starter

    Hi,
    What is the error you are getting ?
    What your solution manger version and SP level ?
    Check below note and see if they help.
    1958910 - EarlyWatch Alert For HANA Database
    Regards

Maybe you are looking for