*solved* nvidia 8600GTS, xorg, and no extra power connected to card.
I just bought a 8600gts and found out I do not have a pci-e power connector on my PSU. I have an adapter being shipped. My question is, X will not run w/o giving me errors about the secondary power not being connected. Thing is, this card runs just as it should under Vista w/o the extra power. Is it possible to get X to start by telling it to ignore the error? And if so, how?
Last edited by somairotevoli (2008-05-08 18:03:46)
Thanks! I will give it a try. It's only a temp fix until the power adapter comes in:)
Edit:
Your solution worked, thanks again.
Last edited by somairotevoli (2008-05-08 18:04:15)
Similar Messages
-
[SOLVED] nvidia-310.19 and strange characters in eclipse
After system update yesterday (including nvidia-310.19) i got a few strange characters in eclipse source editor window from time to time.
I reverted back to nvidia-304.64 and now problem is gone.
Can someone with nvidia-310.19 check if they also see this problem ?
It may take some time for the strange characters to show up.
Last edited by cleanrock (2012-11-25 07:23:24)Don't know if this helps, but...
The latest nvidia driver broke my system graphically (couldn't modprobe nvidia), so I rolled back nvidia and nvidia-utils. Then the system loaded xfce OK, but began to display odd chars...some big, some malformed...very goofy. I just now replaced the driver with the "legacy nvidia" driver (extra/nvidia-304xx) and everything is fine. The first install attempt failed due to existing files in place, so I deleted them then ran the install again...Looks great now.
UPDATE: the font corruption came back with a vengeance. Downgrading xorg-server to the previous version seems to have done the trick....
Last edited by purple12 (2012-11-18 02:05:32) -
HT4009 refund and wive extra charge on credit card
Dear support from 15-07-2013 i leave my apple device with my child so by mistake he purchases app (Injustic) 369.99 AED and other time 74.99 AED and 47.97 AED and 32.85 AED and 3.69 AED already at the same time i see that happen i delite the app what he buy but today when i check the credit card statement i find out i got charge for all of those app and even some charge extra like for the first app i got 2 time charge so i request you to
refund all of the charges because it was only by mistake
thanksWe are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
You can try contacting iTunes support via this page and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
To try and stop it happening again you can use Settings > General > Restrictions to stop in-app purchases and to require your password to be entered for each download from the store.
You might also want to check if any of those app are auto-renewing subscriptions : http://support.apple.com/kb/HT4098 -
MSI 975X Platinum POE and 6-pin power connection
Hi,
I have seen a number of topics somewhat related to my problem, but I am still unsure.
I have an MSI 975X Platinum PowerUp Edition main board, and I recently bought a NorthQ 4775-500S power supply to replace my current Hiper HPU-4M580. A good PSU, but too noisy for my taste.
Anyway, when installing the NorthQ PSU, I noticed that it has a 6-pin connector, I think it is a PCI-e connector. The main board, however, has an 8-pin connector, called JPW in the manual:
"The JPW 12V power connector is used to provide power to the CPU"
The 6-pin plug from the PSU seems to fit nicely in the 8-pin connector. After reading some other posts, I started to remember that 4 pins of the JPW connector were indeed blocked by a removable plastic chip, which I did remove to make room for the 8-pin plug from my previous PSU.
So, I think I can use the 6-pin plug in the 8-pin socket, but I want to ask you guys first; Will this be correct and safe, or should I get a 6-pin to 8-pin adapter, or even a 6-pin to 4-pin adapter?
Thanks in advance!"The 6-pin plug from the PSU seems to fit nicely in the 8-pin connector"
No don't do that.
If your PSU don't have 8pin power cable for the CPU, use the 4pin power cable instead:
But do NOT connect PCI-E power cable(6 pin) in CPU power socket. -
Problem with regular crash with Xorg and nvidia
Hello!
I am using a archlinux distribution for about 5 years. There was sometime problems but now it is very unstable. Every reboot I have a crash of Xorgs and with this a crash of system. Log:
Backtrace:
0: /usr/bin/Xorg (xorg_backtrace+0x3b) [0x809bdab]
1: /usr/bin/Xorg (0x8048000+0x520f5) [0x809a0f5]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb78d840c]
3: /usr/bin/Xorg (0x8048000+0x272a0) [0x806f2a0]
4: /usr/bin/Xorg (0x8048000+0x1a685) [0x8062685]
5: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb750db86]
6: /usr/bin/Xorg (0x8048000+0x1a271) [0x8062271]
Fatal server error:
Caught signal 3 (Quit). Server aborting
About 1 month ago it looks like restart of Xorgs when I press enter key. Alway ENTER key. After some updates/nvidia driver combinations - doesn't change anything. Now after fresh reinstall (well crashes destroys my ext3 filesystem an I need to reinstal the root file system) there are crashes, but now, every freeze I have to restart system. Now I am switchingo into ubuntu, I will try to check sometimes if something changed.
Cashes repeats every reboot from... maby 3-4 months. Now I can say my system is not stable, I use this in work - so this situation is really bad.
My configuration:
[mik@mik-l ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8600M GS] (rev a1)
04:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
06:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
06:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
06:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
06:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
06:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
I am using compiz and emerald.
greetes
AleExtra
Sorry for my poor english - I always read documentation, not writing this.well, after some time, the crach come back. In work I have fully updated system, in home, I wont update system, because of this problem.
On random (I think) enter it crached:
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Backtrace:
0: /usr/bin/Xorg (xorg_backtrace+0x3b) [0x809f81b]
1: /usr/bin/Xorg (0x8048000+0x54745) [0x809c745]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb787240c]
3: /usr/bin/Xorg (0x8048000+0x40170) [0x8088170]
4: /usr/bin/Xorg (0x8048000+0x1a705) [0x8062705]
5: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb7466c76]
6: /usr/bin/Xorg (0x8048000+0x1a2f1) [0x80622f1]
Fatal server error:
Caught signal 3 (Quit). Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) BTC USB Multimedia Keyboard: Close
(II) UnloadModule: "evdev"
(II) BTC USB Multimedia Keyboard: Close
(II) UnloadModule: "evdev"
(II) Logitech USB Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
and restart Xorg -
[SOLVED] Blinking screen - new Xorg and Intel issue
Screen is blinking after opening laptop lid no matter what i did (nothing, lock screen, hibernate, standby). It blinks every 10-20 seconds for about 1-2 seconds, and cpu% used by X's raises from 0.3-1.0 to even 10% and system slows down a little in that moment. My Xorg logs:
$ cat /var/log/Xorg.0.log
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
# closing & opening laptop lid
# right after opening (properly i suppose)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "CMO", prod id 4609
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4609
# after 10-20 seconds
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "CMO", prod id 4609
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4609
# over and over...
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "CMO", prod id 4609
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4609
Blinking stops when i restart computer.
I have newest xorg and intel drivers (xorg-server 1.7.1.901-2 & xf86-video-intel 2.9.1-1). I tried also downgrade this (and related) packages to older versions (even xorg-server 1.5.* & xf86-video-intel 2.4.*) and the same happens... with only one difference. On that oldest packages I've tried screen doesn't blinks, but the wallpaper of the desktop is changing: my -> default -> my -> default... with the same frequency . I was googling a lot, believe me. I study IT on a University and I asked my friends from there, and they just run out of ideas. In addition i can write that it isn't my laptop fault because windows xp works fine and ubuntu 9.04 (i had before archlinux) also worked good. It has started on ubuntu 9.10, so I thought I move to archlinux, and its still here? I suppose its a problem with intel drivers or xorg, but somehow linked with power management of the monitor(?). But why then older packages don't work? Please, I will be grateful for any help.
My /etc/X11/xorg.conf file generated by 'Xorg -configure' command:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri2"
Load "record"
Load "dbe"
Load "dri"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
#Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -HSync -Vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by joda (2009-12-01 09:49:38)SOLVED!!! Must enable KMS => switch off vga option in grub, and replace it with "i915.moduleset=1"
-
Sever issue with Xorg and Nvidia Drivers
I run a 2.6.20 kernel with Xorg and Nvidia drivers all from arch rep on a Asus NV6200. Everything works fine, except one thing. When I exit X, the monitor shuts down imediatly. It wont start up at all, not even by manual startup. I cant understand what happens. The configuration is correct, is done with the correct settings for my video-card and monitor taken directly from the documentation. I cant use my X server at all since several days ... I checked the logs and there are no EE's. Anyway ... here is the log. Help anyone can help, I cant use X at all.
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux solarflare 2.6.20-ARCH #1 SMP PREEMPT Fri Mar 16 20:22:11 CET 2007 i686
Build Date: 27 February 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 21 03:26:45 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "AOC 7F+"
(**) | |-->Device "NVIDIA 6200"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(**) FontPath set to:
/usr/share/fonts/misc
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c34a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 1106,3099 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1317,0985 card 1113,1216 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1019,0996 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1019,0996 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1019,0996 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1019,0996 rev 50 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0221 card 1043,820c rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xeaffffff (0x3000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xe8000000/24, 0xd0000000/28, 0xe9000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9755
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9755
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) NVIDIA dlloader X Driver 1.0-9755 Mon Feb 26 23:23:13 PST 2007
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[17] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.03.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): AOC Spectrum7F (CRT-0)
(--) NVIDIA(0): AOC Spectrum7F (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] 0 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[8] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[10] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[19] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[20] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[23] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.No ... the problem is in the kernel that comes precompiled.
I did this test.
The first time I installed the kernel I unloaded nvidiafb since I dont like it.
When I install nvidiafb back something strange happends. Nvidia module fails to load.
The modprobe sais it cannot find the device nvidia.ko ... but it is there!
So my best guess is, there is something with the kernel. Any ideas?
Problem resolved, installed older driver
Last edited by Nefer-Ra (2007-03-22 02:59:25) -
I installed Xorg and the proprietary nvidia driver using the wiki, but when running xinit or startx I get errors such as no nvidia.ko, unable to connect to X server, and Nos such process server error
Rebooted and works fine
Last edited by duke11235 (2010-08-23 00:36:15)New Progress!
I've managed to get my screen to go black during the server's run, instead of having my TTY just freeze!
I followed the instructions here
However, now I have the problem that the X server shuts down about two seconds after startup. I have confirmed that both of the xrandr commands are completed.
Here is my x log
Here is my x output
As you can see, we have "Screen 1 deleted because of no matching config section". I have no idea what that means.
The NVIDIA driver still appears to try setting mode "NULL" (maybe it isn't getting the available modes properly?)
At the end, there's this weird thing...
reporting 3 4 17 122
have a master to look out for
adjust shatters 0 1366
need to create shared pixmap 1(II) NVIDIA(GPU-0): Deleting GPU-0
Uhhh...why is it deleting my GPU? (I have no idea what it means by that)
UPDATE (again!)...
I HAVE LWM WINDOWS APPEARING! (but I had to stop the nvidia to get that)
I changed the ServerLayout to have Screen 0 be the "intel" screen.
Initially, input wasn't being handled at all, resulting in complete inability to do anything once x started
I managed to get input working by adding some xorg configs for my input devices (now I have fully-functional xorg, but without my nvidia card)
I still want to get my nvidia working.
Last edited by soccermiles (2013-12-22 19:31:50) -
Xorg configuration with nvidia 6800gs agp and flatron l222wt
my computer is set to run with a l222wt lcd monitor with a 1680x1050 native resolution on a nvidia 6800gs vid card through a analog port. for wutever reason, my video settings are no longer being detected by xorg anymore after i install xorg and the nvidia driver. my last arch linux install was fine (i had been using a standard crt at 1280x1024) and when i switched monitors it autodetected the resolution. however, when i went to reinstall linux, it no longer autodetected and i got horrible settings. i tried to use the mode setting under the display subsection to set my resolutiona dn still no go. is their any better way to force it to use my preffered resolution?
thanks
Grama
Last edited by Grama (2008-04-13 19:37:54)well all is working now.... i had not ever edited resolutions using the modeline in the monitor section.... all i needed to do was enter my correct modeline settings and bango correct
as for the ftp install problem i just burned the new 2008.04rc i686 iso and like the arch linux of old it worked once more
thanks
Grama -
[SOLVED] NVidia, Xorg, Output not reaching monitor?
Hardware...
====================================================
Computer: ASUS K55VD Laptop (UEFI Motherboard)
Processor: Intel i5
Graphics: NVidia GeForce 610M, also the Intel chip that I'm not using (I think)
Relevant System Information (I figure maybe the location of my initramfs is messing with driver installation?)...
====================================================
Partitioning...
sda1: /boot (FAT32)
sda2: / (ext4)
sda3: /home (ext4)
Boot: Syslinux EFI setup using efibootmgr (ESP: /boot, Syslinux: /boot/EFI/syslinux)
Driver package: "nvidia", corresponding libgl and lib32 stuff. NOTE: I know this is the wrong version, but my problem is _exactly_ the same with nvidia-304xx.
Xorg Configuration (no other conf files influencing outcome, no ~/.xinitrc)...
/etc/X11/xorg.conf.d/10-evdev.conf
/etc/X11/xorg.conf.d/10-quirks.conf
/etc/X11/xorg.conf.d/10-server.conf
/etc/X11/xorg.conf.d/20-nvidia.conf
Other Notes: The laptop originally came with Windows 8. At the time, I didn't want to spend a whole lot of time installing Arch, so I chose Ubuntu for the time being. While Ubuntu was installed, I noticed that the driver being used was called "Mesa", and certain applications didn't like that (NCAR's VAPOR, for example). Perhaps there's a problem with the hardware that's causing Ubuntu to choose an alternate install system, and now I'm running into that?
Problem...
====================================================
I've set everything up properly according to the Beginner's Guide, NVIDIA and Xorg pages.
I run startx.
At "Loading extension GLX", the whole TTY freezes (stops redrawing, can tell because cursor freezes in current state <on/off>).
At this point, I can still switch TTYs with C-M-F<n>, so it's just that one TTY.
I can type "exit", <Enter>, and then the server dies dramatically.
Here's the full output from the server, which had to be unjumbled by redirecting all output to a file
Here's my /var/log/Xorg.0.log, recovered after the test
I was even able to retrieve this glxinfo output by piping to a file!
Again, I was typing blind, so there's no real guarantee that the glxinfo output is, in fact, glxinfo output...
Analysis...
====================================================
I have no idea what the problem is on the server's shutdown, but I've got ideas about the rest of it.
I figure what's happening is that the server is starting just fine, but it isn't putting output on my monitor. It opens the twm environment, which starts with an open terminal. When I type "exit", <Enter>, the server shuts down again, as expected, but something goes wrong.
That's how it occurred to me to grab that glxinfo: 'glxinfo > ~/test'
Does the following mean that it's actually using the Intel graphics? (found this in Xorg log)
[ 1571.248] (--) PCI:*(0:0:2:0) :::this refers to the Intel graphics
[ 1571.248] (--) PCI: (0:1:0:0) :::this refers to the 610M
What does that asterisk (*) mean?
Does this line mean that my graphics card isn't hooked up to my monitor?
[ 1571.383] (--) NVIDIA(0): Valid display device(s) on GeForce 610M at PCI:1:0:0
[ 1571.383] (--) NVIDIA(0): none
Maybe I need to configure my monitor to be detected somehow?
I noticed two errors in the Xorg log that might be related...
[ 1571.385] (EE) NVIDIA(0): Failed to initiate mode change.
[ 1571.385] (EE) NVIDIA(0): Failed to complete mode change
Maybe there's a simple package installation that will fix everything?
If there's any more information you need, please ask.
Thanks!
PS: wgetpaste was EXTREMELY helpful!
Last edited by soccermiles (2013-12-22 23:23:40)New Progress!
I've managed to get my screen to go black during the server's run, instead of having my TTY just freeze!
I followed the instructions here
However, now I have the problem that the X server shuts down about two seconds after startup. I have confirmed that both of the xrandr commands are completed.
Here is my x log
Here is my x output
As you can see, we have "Screen 1 deleted because of no matching config section". I have no idea what that means.
The NVIDIA driver still appears to try setting mode "NULL" (maybe it isn't getting the available modes properly?)
At the end, there's this weird thing...
reporting 3 4 17 122
have a master to look out for
adjust shatters 0 1366
need to create shared pixmap 1(II) NVIDIA(GPU-0): Deleting GPU-0
Uhhh...why is it deleting my GPU? (I have no idea what it means by that)
UPDATE (again!)...
I HAVE LWM WINDOWS APPEARING! (but I had to stop the nvidia to get that)
I changed the ServerLayout to have Screen 0 be the "intel" screen.
Initially, input wasn't being handled at all, resulting in complete inability to do anything once x started
I managed to get input working by adding some xorg configs for my input devices (now I have fully-functional xorg, but without my nvidia card)
I still want to get my nvidia working.
Last edited by soccermiles (2013-12-22 19:31:50) -
[SOLVED] Best drivers for an Nvidia 8600GTS?
Hi all. I installed Arch for the first time over the weekend. Everything went smoothly until it came time to start X - could never get it to work. I tried lots of different remedies (installing nvidia drivers from the repositories, installing the driver supplied by Nvidia themselves, blacklisting Nouveau, etc.). Nothing worked, and I think now the best thing is to start over clean and try to find where I went wrong (as there's a good chance I've done more harm than good in the process).
So as I nuke and reinstall, I'm wondering which driver will be best for my c. 2006 Nvidia 8600GTS card. Should I install the arch nvidia drivers with
pacman -Syu nvidia nvidia-utils nvidia-libgl libvdpau
or should I use the driver supplied by Nvidia? And if I go with the Nvidia-supplied driver, do I leave nvidia-utils, nvidia-libgl and/or libvdpau, or does it replace those, too?
Any thoughts would be appreciated. Thanks!
Last edited by jmatthewturner (2014-06-02 14:48:41)First of all, please, read through the related Wiki pages.
The arch nvidia drivers (packages: nvidia, nvidia-utils, etc) are the ones supplied by nvidia, maintained and packaged by the arch maintainers and packagers.
https://wiki.archlinux.org/index.php/NVIDIA
The open source driver is called nouveau.
https://wiki.archlinux.org/index.php/Nouveau -
[SOLVED]problem with Bumblebee and Kernel 3.11-1-2
Hi!
I'm having problems with Bumblebee from Kernel 3.10 but I read that Kernel 3.11 solved the problem, I searched and tried possible solutions to my problem unsuccessfully
The message shows me when I run "optirun":
[ 5454.262739] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.
[ 5454.262776] [ERROR]Aborting because fallback start is disabled.
I've tried with wiki's solutions, forums solutions...
Configurations files:
/etc/bumblebee/bumblebee.conf:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=virtualgl
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00.0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
lspci |grep NVIDIA:
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 640M] (rev a1)
I hope can help me
Thanks!
Last edited by surrealistic (2013-11-04 18:46:35)My /var/log/Xorg.8.log:
[ 337.161]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 337.161] X Protocol Version 11, Revision 0
[ 337.161] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 337.161] Current Operating System: Linux h131h-laptop 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[ 337.161] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4eb69984-2228-4aba-9863-28a7fa854e51 rw quiet
[ 337.161] Build Date: 01 November 2013 05:10:48PM
[ 337.161]
[ 337.161] Current version of pixman: 0.30.2
[ 337.161] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 337.161] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 337.161] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov 4 14:20:04 2013
[ 337.161] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 337.161] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 337.161] (==) ServerLayout "Layout0"
[ 337.161] (==) No screen section available. Using defaults.
[ 337.161] (**) |-->Screen "Default Screen Section" (0)
[ 337.161] (**) | |-->Monitor "<default monitor>"
[ 337.161] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 337.161] (**) | |-->Device "DiscreteNvidia"
[ 337.161] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 337.161] (**) Option "AutoAddDevices" "false"
[ 337.161] (**) Option "AutoAddGPU" "false"
[ 337.161] (**) Not automatically adding devices
[ 337.161] (==) Automatically enabling devices
[ 337.161] (**) Not automatically adding GPU devices
[ 337.161] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 337.162] Entry deleted from font path.
[ 337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 337.162] Entry deleted from font path.
[ 337.162] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 337.162] Entry deleted from font path.
[ 337.162] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 337.162] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 337.162] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 337.162] (==) |-->Input Device "<default pointer>"
[ 337.162] (==) |-->Input Device "<default keyboard>"
[ 337.162] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 337.162] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 337.162] (II) Loader magic: 0x7fdc20
[ 337.162] (II) Module ABI versions:
[ 337.162] X.Org ANSI C Emulation: 0.4
[ 337.162] X.Org Video Driver: 14.1
[ 337.162] X.Org XInput driver : 19.1
[ 337.162] X.Org Server Extension : 7.0
[ 337.162] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 337.162] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 337.162] setversion 1.4 failed
[ 337.163] (--) PCI:*(0:1:0:0) 10de:0fd2:1025:0648 rev 161, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128
[ 337.163] Initializing built-in extension Generic Event Extension
[ 337.163] Initializing built-in extension SHAPE
[ 337.163] Initializing built-in extension MIT-SHM
[ 337.163] Initializing built-in extension XInputExtension
[ 337.163] Initializing built-in extension XTEST
[ 337.163] Initializing built-in extension BIG-REQUESTS
[ 337.163] Initializing built-in extension SYNC
[ 337.163] Initializing built-in extension XKEYBOARD
[ 337.163] Initializing built-in extension XC-MISC
[ 337.163] Initializing built-in extension SECURITY
[ 337.163] Initializing built-in extension XINERAMA
[ 337.163] Initializing built-in extension XFIXES
[ 337.163] Initializing built-in extension RENDER
[ 337.163] Initializing built-in extension RANDR
[ 337.164] Initializing built-in extension COMPOSITE
[ 337.164] Initializing built-in extension DAMAGE
[ 337.164] Initializing built-in extension MIT-SCREEN-SAVER
[ 337.164] Initializing built-in extension DOUBLE-BUFFER
[ 337.164] Initializing built-in extension RECORD
[ 337.164] Initializing built-in extension DPMS
[ 337.164] Initializing built-in extension X-Resource
[ 337.164] Initializing built-in extension XVideo
[ 337.164] Initializing built-in extension XVideo-MotionCompensation
[ 337.164] Initializing built-in extension XFree86-VidModeExtension
[ 337.164] Initializing built-in extension XFree86-DGA
[ 337.164] Initializing built-in extension XFree86-DRI
[ 337.164] Initializing built-in extension DRI2
[ 337.164] (II) LoadModule: "glx"
[ 337.164] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 337.172] (II) Module glx: vendor="NVIDIA Corporation"
[ 337.172] compiled for 4.0.2, module version = 1.0.0
[ 337.172] Module class: X.Org Server Extension
[ 337.172] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
[ 337.172] Loading extension GLX
[ 337.172] (II) LoadModule: "nvidia"
[ 337.172] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 337.172] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 337.172] compiled for 4.0.2, module version = 1.0.0
[ 337.172] Module class: X.Org Video Driver
[ 337.172] (II) LoadModule: "mouse"
[ 337.172] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 337.172] (II) Module mouse: vendor="X.Org Foundation"
[ 337.172] compiled for 1.14.0, module version = 1.9.0
[ 337.172] Module class: X.Org XInput Driver
[ 337.172] ABI class: X.Org XInput driver, version 19.1
[ 337.172] (II) LoadModule: "kbd"
[ 337.173] (WW) Warning, couldn't open module kbd
[ 337.173] (II) UnloadModule: "kbd"
[ 337.173] (II) Unloading kbd
[ 337.173] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 337.173] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
[ 337.173] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 337.173] (--) using VT number 1
[ 337.173] (II) Loading sub module "fb"
[ 337.173] (II) LoadModule: "fb"
[ 337.173] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 337.173] (II) Module fb: vendor="X.Org Foundation"
[ 337.173] compiled for 1.14.4, module version = 1.0.0
[ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 337.173] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 337.173] (II) Loading sub module "wfb"
[ 337.173] (II) LoadModule: "wfb"
[ 337.173] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 337.173] (II) Module wfb: vendor="X.Org Foundation"
[ 337.173] compiled for 1.14.4, module version = 1.0.0
[ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 337.173] (II) Loading sub module "shadow"
[ 337.173] (II) LoadModule: "shadow"
[ 337.173] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 337.173] (II) Module shadow: vendor="X.Org Foundation"
[ 337.173] compiled for 1.14.4, module version = 1.1.0
[ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 337.173] (II) Loading sub module "ramdac"
[ 337.173] (II) LoadModule: "ramdac"
[ 337.173] (II) Module "ramdac" already built-in
[ 337.174] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 337.174] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 337.174] (==) NVIDIA(0): RGB weight 888
[ 337.174] (==) NVIDIA(0): Default visual is TrueColor
[ 337.174] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 337.174] (**) NVIDIA(0): Option "NoLogo" "true"
[ 337.174] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 337.174] (**) NVIDIA(0): Option "UseEDID" "false"
[ 337.174] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 337.174] (**) NVIDIA(0): Enabling 2D acceleration
[ 337.174] (**) NVIDIA(0): Ignoring EDIDs
[ 337.174] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 337.174] (**) NVIDIA(0): mode
[ 341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 341.309] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 341.309] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 341.309] (EE) NVIDIA(0): README for additional information.
[ 341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 341.309] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 341.309] (II) UnloadModule: "nvidia"
[ 341.309] (II) UnloadSubModule: "shadow"
[ 341.309] (II) UnloadSubModule: "wfb"
[ 341.309] (II) UnloadSubModule: "fb"
[ 341.309] (EE) Screen(s) found, but none have a usable configuration.
[ 341.309] (EE)
Fatal server error:
[ 341.309] (EE) no screens found(EE)
[ 341.309] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 341.309] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 341.309] (EE)
[ 341.309] (EE) Server terminated with error (1). Closing log file.
dmesg |grep bbswitch:
[ 13.570577] bbswitch: version 0.7
[ 13.570585] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 13.570591] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 13.570687] bbswitch: detected an Optimus _DSM function
[ 13.570741] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 13.572354] bbswitch: disabling discrete graphics
[ 261.419114] bbswitch: enabling discrete graphics
[ 278.445698] bbswitch: disabling discrete graphics
[ 279.055257] bbswitch: enabling discrete graphics
[ 286.292315] bbswitch: disabling discrete graphics
[ 291.911052] bbswitch: enabling discrete graphics
[ 310.011289] bbswitch: disabling discrete graphics
[ 336.982794] bbswitch: enabling discrete graphics
[ 349.526470] bbswitch: enabling discrete graphics
I used "rcutree" option as shown in the post that you put, but I've deleted all changes made to use default configurations, because the solution of the post didn't work -
[SOLVED] Steam causing Xorg to crash
I've spent some extensive time on this now; fresh install of Antergos (a direct derivative of Arch)
I'm running Nvidia blobs, with the steam-libs package from the alucryd-multilib repository.
I have so far followed the Archwiki in doing the following:
rm ~/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6
rm ~/.local/share/Steam/ubuntu12_32/steam-runtime/i386/lib/i386-linux-gnu/libgcc_s.so.1
rm ~/.local/share/Steam/ubuntu12_32/steam-runtime/amd64/lib/x86_64-linux-gnu/libgcc_s.so.1
rm ~/.local/share/Steam/ubuntu12_32/steam-runtime/amd64/usr/lib/x86_64-linux-gnu/libstdc++.so.6
rm ~/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libxcb.so.1
From there, I have tried running steam both with and without it's runtime, via the environment variable STEAM_RUNTIME.
No matter what I do, steam segfaults Xorg:
STEAM_RUNTIME=0:
steam.log:
No environment set
steam.log
Running Steam on antergos 64-bit
STEAM_RUNTIME is enabled automatically
Installing breakpad exception handler for appid(steam)/version(0_client)
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
after 73 requests (73 known processed) with 0 events remaining.
ILocalize::AddFile() failed to load file "public/steambootstrapper_english.txt".
[2014-10-24 17:43:04] Startup - updater built Aug 26 2014 15:35:42
SteamUpdateUI: An X Error occurred
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 156 (NV-GLX)
Minor opcode of failed request: 4
Resource id in failed request: 0x1600002
Serial number of failed request: 41
xerror_handler: X failed, continuing
xorg.log
[ 1454.565]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 1454.565] X Protocol Version 11, Revision 0
[ 1454.565] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 1454.565] Current Operating System: Linux xaeropc 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64
[ 1454.565] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3d473422-1200-453b-9be6-b585562b46a5 rw resume=UUID=505df89f-f4da-49a3-a41a-6194403a241e quiet
[ 1454.565] Build Date: 21 September 2014 10:53:13AM
[ 1454.565]
[ 1454.565] Current version of pixman: 0.32.6
[ 1454.565] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1454.565] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1454.565] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 24 17:46:24 2014
[ 1454.565] (==) Using config file: "/etc/X11/xorg.conf"
[ 1454.565] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1454.565] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1454.565] (==) No Layout section. Using the first Screen section.
[ 1454.565] (**) |-->Screen "Screen0" (0)
[ 1454.565] (**) | |-->Monitor "Monitor0"
[ 1454.565] (**) | |-->Device "Device0"
[ 1454.565] (==) Automatically adding devices
[ 1454.565] (==) Automatically enabling devices
[ 1454.565] (==) Automatically adding GPU devices
[ 1454.565] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1454.565] Entry deleted from font path.
[ 1454.565] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1454.565] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1454.565] Entry deleted from font path.
[ 1454.565] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1454.565] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 1454.565] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1454.565] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1454.565] (II) Loader magic: 0x818d80
[ 1454.565] (II) Module ABI versions:
[ 1454.565] X.Org ANSI C Emulation: 0.4
[ 1454.565] X.Org Video Driver: 18.0
[ 1454.565] X.Org XInput driver : 21.0
[ 1454.565] X.Org Server Extension : 8.0
[ 1454.566] (EE) systemd-logind: failed to get session: PID 19374 does not belong to any known session
[ 1454.567] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1454.567] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 1454.568] (--) PCI:*(0:3:0:0) 10de:1189:3842:2670 rev 161, Mem @ 0xf6000000/16777216, 0xc8000000/134217728, 0xd2000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
[ 1454.568] (--) PCI: (0:4:0:0) 10de:0dc4:1458:34fe rev 161, Mem @ 0xf8000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000cc00/128, BIOS @ 0x????????/524288
[ 1454.568] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1454.568] (II) LoadModule: "glx"
[ 1454.568] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1454.569] (II) Module glx: vendor="X.Org Foundation"
[ 1454.569] compiled for 1.16.1, module version = 1.0.0
[ 1454.569] ABI class: X.Org Server Extension, version 8.0
[ 1454.569] (==) AIGLX enabled
[ 1454.569] (II) LoadModule: "nvidia"
[ 1454.569] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 1454.569] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1454.569] compiled for 4.0.2, module version = 1.0.0
[ 1454.572] Module class: X.Org Video Driver
[ 1454.572] (II) NVIDIA dlloader X Driver 343.22 Thu Sep 11 15:34:47 PDT 2014
[ 1454.572] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1454.572] (++) using VT number 1
[ 1454.591] (II) Loading sub module "fb"
[ 1454.591] (II) LoadModule: "fb"
[ 1454.591] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1454.594] (II) Module fb: vendor="X.Org Foundation"
[ 1454.594] compiled for 1.16.1, module version = 1.0.0
[ 1454.594] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1454.594] (II) Loading sub module "wfb"
[ 1454.594] (II) LoadModule: "wfb"
[ 1454.595] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 1454.595] (II) Module wfb: vendor="X.Org Foundation"
[ 1454.595] compiled for 1.16.1, module version = 1.0.0
[ 1454.595] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1454.595] (II) Loading sub module "ramdac"
[ 1454.595] (II) LoadModule: "ramdac"
[ 1454.595] (II) Module "ramdac" already built-in
[ 1454.599] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 1454.599] (==) NVIDIA(0): RGB weight 888
[ 1454.599] (==) NVIDIA(0): Default visual is TrueColor
[ 1454.599] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1454.599] (**) NVIDIA(0): Option "NoLogo" "true"
[ 1454.599] (**) NVIDIA(0): Option "UseEdidFreqs" "false"
[ 1454.599] (**) NVIDIA(0): Option "ExactModeTimingsDVI" "True"
[ 1454.599] (**) NVIDIA(0): Option "UseEdidDpi" "false"
[ 1454.599] (**) NVIDIA(0): Option "UseEDID" "false"
[ 1454.599] (**) NVIDIA(0): Option "MetaModes" "2560x1440_60 +0 +0"
[ 1454.599] (**) NVIDIA(0): Enabling 2D acceleration
[ 1454.599] (**) NVIDIA(0): Ignoring EDIDs
[ 1454.599] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 1454.599] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 1454.599] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 1454.599] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 1454.599] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 1455.079] (II) NVIDIA(0): Not probing EDID on DFP-1.
[ 1455.079] (II) NVIDIA(0): Not probing EDID on DFP-0.
[ 1455.079] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 1455.080] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 670 (GK104) at PCI:3:0:0 (GPU-0)
[ 1455.080] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 1455.080] (--) NVIDIA(0): VideoBIOS: 80.04.4b.00.70
[ 1455.080] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1455.111] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 670 at PCI:3:0:0
[ 1455.111] (--) NVIDIA(0): CRT-0
[ 1455.111] (--) NVIDIA(0): DFP-0 (boot, connected)
[ 1455.111] (--) NVIDIA(0): DFP-1 (connected)
[ 1455.111] (--) NVIDIA(0): DFP-2
[ 1455.111] (--) NVIDIA(0): DFP-3
[ 1455.111] (--) NVIDIA(0): DFP-4
[ 1455.111] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 1455.111] (--) NVIDIA(0): DFP-0: Internal TMDS
[ 1455.111] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 1455.111] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 1455.111] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 1455.111] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 1455.111] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 1455.111] (--) NVIDIA(0): DFP-3: Internal TMDS
[ 1455.111] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 1455.111] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 1455.111] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 1455.111] (**) NVIDIA(0): Not using HorizSync/VertRefresh ranges from the EDID for
[ 1455.111] (**) NVIDIA(0): display device DFP-0 (Using EDID frequencies has been
[ 1455.111] (**) NVIDIA(0): disabled on all display devices.)
[ 1455.111] (**) NVIDIA(0): Not using HorizSync/VertRefresh ranges from the EDID for
[ 1455.111] (**) NVIDIA(0): display device DFP-1 (Using EDID frequencies has been
[ 1455.111] (**) NVIDIA(0): disabled on all display devices.)
[ 1455.111] (II) NVIDIA(0): Validated MetaModes:
[ 1455.111] (II) NVIDIA(0): "2560x1440_60+0+0"
[ 1455.111] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[ 1455.147] (**) NVIDIA(0): DPI set to (108, 108); computed from "DisplaySize" Monitor
[ 1455.147] (**) NVIDIA(0): section option
[ 1455.147] (--) Depth 24 pixmap format is 32 bpp
[ 1455.681] (II) NVIDIA(0): Display (DELL U2410 (DFP-2)) does not support NVIDIA 3D Vision
[ 1455.681] (II) NVIDIA(0): stereo.
[ 1455.696] (II) NVIDIA(0): Display (DELL U2410 (DFP-0)) does not support NVIDIA 3D Vision
[ 1455.696] (II) NVIDIA(0): stereo.
[ 1455.696] (II) NVIDIA(GPU-1): Found DRM driver nvidia-drm (20130102)
[ 1455.759] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce GTS 450 (GF106) at PCI:4:0:0 (GPU-1)
[ 1455.759] (--) NVIDIA(GPU-1): Memory: 1048576 kBytes
[ 1455.759] (--) NVIDIA(GPU-1): VideoBIOS: 70.06.0f.00.05
[ 1455.759] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[ 1455.759] (--) NVIDIA(GPU-1): Valid display device(s) on GeForce GTS 450 at PCI:4:0:0
[ 1455.759] (--) NVIDIA(GPU-1): CRT-0
[ 1455.759] (--) NVIDIA(GPU-1): CRT-1
[ 1455.759] (--) NVIDIA(GPU-1): DELL U2410 (DFP-0) (boot, connected)
[ 1455.759] (--) NVIDIA(GPU-1): DFP-1
[ 1455.759] (--) NVIDIA(GPU-1): DELL U2410 (DFP-2) (connected)
[ 1455.759] (--) NVIDIA(GPU-1): CRT-0: 400.0 MHz maximum pixel clock
[ 1455.759] (--) NVIDIA(GPU-1): CRT-1: 400.0 MHz maximum pixel clock
[ 1455.759] (--) NVIDIA(GPU-1): DELL U2410 (DFP-0): Internal TMDS
[ 1455.759] (--) NVIDIA(GPU-1): DELL U2410 (DFP-0): 330.0 MHz maximum pixel clock
[ 1455.759] (--) NVIDIA(GPU-1): DFP-1: Internal TMDS
[ 1455.759] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
[ 1455.759] (--) NVIDIA(GPU-1): DELL U2410 (DFP-2): Internal TMDS
[ 1455.759] (--) NVIDIA(GPU-1): DELL U2410 (DFP-2): 225.0 MHz maximum pixel clock
[ 1455.759] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 1455.759] (II) NVIDIA: access.
[ 1455.764] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1455.764] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1455.764] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1455.764] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1455.764] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1455.764] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1455.764] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1455.764] (II) NVIDIA(0): Config Options in the README.
[ 1455.795] (II) NVIDIA(0): Setting mode "2560x1440_60+0+0"
[ 1455.855] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1455.855] (==) NVIDIA(0): Backing store enabled
[ 1455.855] (==) NVIDIA(0): Silken mouse enabled
[ 1455.855] (==) NVIDIA(0): DPMS enabled
[ 1455.856] (II) Loading sub module "dri2"
[ 1455.856] (II) LoadModule: "dri2"
[ 1455.856] (II) Module "dri2" already built-in
[ 1455.856] (II) NVIDIA(0): [DRI2] Setup complete
[ 1455.856] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1455.856] (--) RandR disabled
[ 1455.859] (II) AIGLX: Screen 0 is not DRI2 capable
[ 1455.859] (EE) AIGLX: reverting to software rendering
[ 1455.870] (II) AIGLX: Loaded and initialized swrast
[ 1455.870] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 1455.902] (II) config/udev: Adding input device Power Button (/dev/input/event11)
[ 1455.902] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1455.902] (**) Power Button: Applying InputClass "system-keyboard"
[ 1455.902] (II) LoadModule: "evdev"
[ 1455.902] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1455.902] (II) Module evdev: vendor="X.Org Foundation"
[ 1455.902] compiled for 1.16.0, module version = 2.9.0
[ 1455.902] Module class: X.Org XInput Driver
[ 1455.902] ABI class: X.Org XInput driver, version 21.0
[ 1455.902] (II) Using input driver 'evdev' for 'Power Button'
[ 1455.902] (**) Power Button: always reports core events
[ 1455.902] (**) evdev: Power Button: Device: "/dev/input/event11"
[ 1455.902] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1455.902] (--) evdev: Power Button: Found keys
[ 1455.902] (II) evdev: Power Button: Configuring as keyboard
[ 1455.902] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event11"
[ 1455.902] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1455.902] (**) Option "xkb_rules" "evdev"
[ 1455.902] (**) Option "xkb_model" "pc104"
[ 1455.902] (**) Option "xkb_layout" "us"
[ 1455.915] (II) config/udev: Adding input device Power Button (/dev/input/event10)
[ 1455.915] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1455.915] (**) Power Button: Applying InputClass "system-keyboard"
[ 1455.915] (II) Using input driver 'evdev' for 'Power Button'
[ 1455.915] (**) Power Button: always reports core events
[ 1455.915] (**) evdev: Power Button: Device: "/dev/input/event10"
[ 1455.915] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1455.915] (--) evdev: Power Button: Found keys
[ 1455.915] (II) evdev: Power Button: Configuring as keyboard
[ 1455.915] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12/event10"
[ 1455.915] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 1455.915] (**) Option "xkb_rules" "evdev"
[ 1455.915] (**) Option "xkb_model" "pc104"
[ 1455.915] (**) Option "xkb_layout" "us"
[ 1455.915] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 1455.915] (II) No input driver specified, ignoring this device.
[ 1455.915] (II) This device may have been added with another device file.
[ 1455.915] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 1455.915] (II) No input driver specified, ignoring this device.
[ 1455.915] (II) This device may have been added with another device file.
[ 1455.916] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[ 1455.916] (II) No input driver specified, ignoring this device.
[ 1455.916] (II) This device may have been added with another device file.
[ 1455.916] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event17)
[ 1455.916] (II) No input driver specified, ignoring this device.
[ 1455.916] (II) This device may have been added with another device file.
[ 1455.916] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event19)
[ 1455.916] (II) No input driver specified, ignoring this device.
[ 1455.916] (II) This device may have been added with another device file.
[ 1455.916] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event20)
[ 1455.916] (II) No input driver specified, ignoring this device.
[ 1455.916] (II) This device may have been added with another device file.
[ 1455.916] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event21)
[ 1455.916] (II) No input driver specified, ignoring this device.
[ 1455.916] (II) This device may have been added with another device file.
[ 1455.916] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event22)
[ 1455.916] (II) No input driver specified, ignoring this device.
[ 1455.916] (II) This device may have been added with another device file.
[ 1455.916] (II) config/udev: Adding input device Generic Turtle Beach USB Audio (/dev/input/event13)
[ 1455.916] (**) Generic Turtle Beach USB Audio: Applying InputClass "evdev keyboard catchall"
[ 1455.916] (**) Generic Turtle Beach USB Audio: Applying InputClass "system-keyboard"
[ 1455.916] (II) Using input driver 'evdev' for 'Generic Turtle Beach USB Audio'
[ 1455.916] (**) Generic Turtle Beach USB Audio: always reports core events
[ 1455.916] (**) evdev: Generic Turtle Beach USB Audio: Device: "/dev/input/event13"
[ 1455.917] (--) evdev: Generic Turtle Beach USB Audio: Vendor 0x10f5 Product 0x211
[ 1455.917] (--) evdev: Generic Turtle Beach USB Audio: Found keys
[ 1455.917] (II) evdev: Generic Turtle Beach USB Audio: Configuring as keyboard
[ 1455.917] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-4/3-4.2/3-4.2:1.3/0003:10F5:0211.0003/input/input16/event13"
[ 1455.917] (II) XINPUT: Adding extended input device "Generic Turtle Beach USB Audio" (type: KEYBOARD, id 8)
[ 1455.917] (**) Option "xkb_rules" "evdev"
[ 1455.917] (**) Option "xkb_model" "pc104"
[ 1455.917] (**) Option "xkb_layout" "us"
[ 1455.917] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event8)
[ 1455.917] (II) No input driver specified, ignoring this device.
[ 1455.917] (II) This device may have been added with another device file.
[ 1455.917] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event9)
[ 1455.917] (II) No input driver specified, ignoring this device.
[ 1455.917] (II) This device may have been added with another device file.
[ 1455.917] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event2)
[ 1455.917] (II) No input driver specified, ignoring this device.
[ 1455.917] (II) This device may have been added with another device file.
[ 1455.917] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event3)
[ 1455.917] (II) No input driver specified, ignoring this device.
[ 1455.917] (II) This device may have been added with another device file.
[ 1455.917] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event4)
[ 1455.917] (II) No input driver specified, ignoring this device.
[ 1455.917] (II) This device may have been added with another device file.
[ 1455.917] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event5)
[ 1455.917] (II) No input driver specified, ignoring this device.
[ 1455.917] (II) This device may have been added with another device file.
[ 1455.918] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event6)
[ 1455.918] (II) No input driver specified, ignoring this device.
[ 1455.918] (II) This device may have been added with another device file.
[ 1455.918] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event7)
[ 1455.918] (II) No input driver specified, ignoring this device.
[ 1455.918] (II) This device may have been added with another device file.
[ 1455.918] (II) config/udev: Adding input device ROCCAT ROCCAT Kone Pure (/dev/input/event0)
[ 1455.918] (**) ROCCAT ROCCAT Kone Pure: Applying InputClass "evdev pointer catchall"
[ 1455.918] (**) ROCCAT ROCCAT Kone Pure: Applying InputClass "evdev keyboard catchall"
[ 1455.918] (**) ROCCAT ROCCAT Kone Pure: Applying InputClass "system-keyboard"
[ 1455.918] (II) Using input driver 'evdev' for 'ROCCAT ROCCAT Kone Pure'
[ 1455.918] (**) ROCCAT ROCCAT Kone Pure: always reports core events
[ 1455.918] (**) evdev: ROCCAT ROCCAT Kone Pure: Device: "/dev/input/event0"
[ 1455.918] (--) evdev: ROCCAT ROCCAT Kone Pure: Vendor 0x1e7d Product 0x2dbe
[ 1455.918] (--) evdev: ROCCAT ROCCAT Kone Pure: Found 9 mouse buttons
[ 1455.918] (--) evdev: ROCCAT ROCCAT Kone Pure: Found scroll wheel(s)
[ 1455.918] (--) evdev: ROCCAT ROCCAT Kone Pure: Found relative axes
[ 1455.918] (--) evdev: ROCCAT ROCCAT Kone Pure: Found x and y relative axes
[ 1455.918] (--) evdev: ROCCAT ROCCAT Kone Pure: Found absolute axes
[ 1455.918] (II) evdev: ROCCAT ROCCAT Kone Pure: Forcing absolute x/y axes to exist.
[ 1455.918] (--) evdev: ROCCAT ROCCAT Kone Pure: Found keys
[ 1455.918] (II) evdev: ROCCAT ROCCAT Kone Pure: Configuring as mouse
[ 1455.918] (II) evdev: ROCCAT ROCCAT Kone Pure: Configuring as keyboard
[ 1455.918] (II) evdev: ROCCAT ROCCAT Kone Pure: Adding scrollwheel support
[ 1455.918] (**) evdev: ROCCAT ROCCAT Kone Pure: YAxisMapping: buttons 4 and 5
[ 1455.918] (**) evdev: ROCCAT ROCCAT Kone Pure: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1455.918] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/0003:1E7D:2DBE.0001/input/input2/event0"
[ 1455.918] (II) XINPUT: Adding extended input device "ROCCAT ROCCAT Kone Pure" (type: KEYBOARD, id 9)
[ 1455.918] (**) Option "xkb_rules" "evdev"
[ 1455.918] (**) Option "xkb_model" "pc104"
[ 1455.918] (**) Option "xkb_layout" "us"
[ 1455.918] (II) evdev: ROCCAT ROCCAT Kone Pure: initialized for relative axes.
[ 1455.918] (WW) evdev: ROCCAT ROCCAT Kone Pure: ignoring absolute axes.
[ 1455.918] (**) ROCCAT ROCCAT Kone Pure: (accel) keeping acceleration scheme 1
[ 1455.918] (**) ROCCAT ROCCAT Kone Pure: (accel) acceleration profile 0
[ 1455.918] (**) ROCCAT ROCCAT Kone Pure: (accel) acceleration factor: 2.000
[ 1455.918] (**) ROCCAT ROCCAT Kone Pure: (accel) acceleration threshold: 4
[ 1455.918] (II) config/udev: Adding input device ROCCAT ROCCAT Kone Pure (/dev/input/mouse0)
[ 1455.918] (**) ROCCAT ROCCAT Kone Pure: Applying InputClass "system-keyboard"
[ 1455.918] (II) No input driver specified, ignoring this device.
[ 1455.918] (II) This device may have been added with another device file.
[ 1455.919] (II) config/udev: Adding input device ROCCAT ROCCAT Kone Pure (/dev/input/event1)
[ 1455.919] (**) ROCCAT ROCCAT Kone Pure: Applying InputClass "evdev keyboard catchall"
[ 1455.919] (**) ROCCAT ROCCAT Kone Pure: Applying InputClass "system-keyboard"
[ 1455.919] (II) Using input driver 'evdev' for 'ROCCAT ROCCAT Kone Pure'
[ 1455.919] (**) ROCCAT ROCCAT Kone Pure: always reports core events
[ 1455.919] (**) evdev: ROCCAT ROCCAT Kone Pure: Device: "/dev/input/event1"
[ 1455.919] (--) evdev: ROCCAT ROCCAT Kone Pure: Vendor 0x1e7d Product 0x2dbe
[ 1455.919] (--) evdev: ROCCAT ROCCAT Kone Pure: Found keys
[ 1455.919] (II) evdev: ROCCAT ROCCAT Kone Pure: Configuring as keyboard
[ 1455.919] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.1/0003:1E7D:2DBE.0002/input/input3/event1"
[ 1455.919] (II) XINPUT: Adding extended input device "ROCCAT ROCCAT Kone Pure" (type: KEYBOARD, id 10)
[ 1455.919] (**) Option "xkb_rules" "evdev"
[ 1455.919] (**) Option "xkb_model" "pc104"
[ 1455.919] (**) Option "xkb_layout" "us"
[ 1455.919] (II) config/udev: Adding input device Topre Corporation Realforce 87 (/dev/input/event18)
[ 1455.919] (**) Topre Corporation Realforce 87: Applying InputClass "evdev keyboard catchall"
[ 1455.919] (**) Topre Corporation Realforce 87: Applying InputClass "system-keyboard"
[ 1455.919] (II) Using input driver 'evdev' for 'Topre Corporation Realforce 87'
[ 1455.919] (**) Topre Corporation Realforce 87: always reports core events
[ 1455.919] (**) evdev: Topre Corporation Realforce 87: Device: "/dev/input/event18"
[ 1455.919] (--) evdev: Topre Corporation Realforce 87: Vendor 0x853 Product 0x111
[ 1455.919] (--) evdev: Topre Corporation Realforce 87: Found keys
[ 1455.919] (II) evdev: Topre Corporation Realforce 87: Configuring as keyboard
[ 1455.919] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-6/4-6.4/4-6.4:1.0/0003:0853:0111.0004/input/input21/event18"
[ 1455.919] (II) XINPUT: Adding extended input device "Topre Corporation Realforce 87" (type: KEYBOARD, id 11)
[ 1455.919] (**) Option "xkb_rules" "evdev"
[ 1455.919] (**) Option "xkb_model" "pc104"
[ 1455.919] (**) Option "xkb_layout" "us"
[ 1455.919] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)
[ 1455.919] (II) No input driver specified, ignoring this device.
[ 1455.919] (II) This device may have been added with another device file.
[ 1468.650] (II) NVIDIA(GPU-0): Not probing EDID on DFP-1.
[ 1468.650] (II) NVIDIA(GPU-0): Not probing EDID on DFP-0.
[ 1479.623] (EE)
[ 1479.623] (EE) Backtrace:
[ 1479.623] (EE) 0: /usr/bin/Xorg.bin (xorg_backtrace+0x56) [0x593a46]
[ 1479.623] (EE) 1: /usr/bin/Xorg.bin (0x400000+0x197b99) [0x597b99]
[ 1479.623] (EE) 2: /usr/lib/libc.so.6 (0x7fc16d4de000+0x339f0) [0x7fc16d5119f0]
[ 1479.623] (EE)
[ 1479.623] (EE) Segmentation fault at address 0x0
[ 1479.623] (EE)
Fatal server error:
[ 1479.623] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 1479.623] (EE)
[ 1479.623] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1479.623] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 1479.623] (EE)
[ 1480.683] (EE) Server terminated with error (1). Closing log file.
I'm pretty much at my wits end here, nothing seems to affect what's going on...
EDIT:
While trying to fix this issue, I had also updated to xorg-server-git as per the recommendation in one of the threads I had seen on this issue.
Somehow, by doing this I had mesa-libgl and had overwritten the nvidia GLX module. Reinstalling the nvidia drivers fixed the problem, steam now launches fine.
Last edited by Xaero252 (2014-10-25 00:12:25)deadlydeathcone wrote:EXA compositing just recently got enabled in the via drivers, so to get it working you're going to have to use CVS grabs of the openchrome drivers in addition to Xorg 7.1 with a few fixes patched in that haven't made it to head. I went through the same process in Edgy Eft (I don't currently use Arch, I'm just browsing the forums here as Arch looks like a very nice distro), but it's worth it as even though the compositing code is new it's very quick and stable.
All the necessary stuff is supposedly in the main repos. Arch is already using 7.1, the CVS openchrome drivers are in Extra (and crash just like the via and unichrome ones), etc.
(What fixes are you talking about though? There are unpatched bugs in the current version of the server that prevent EXA from working properly?)
byte wrote:The only thing I recognized when I enabled EXA (after reading 'man radeon') for a test was that it totally messed up font rendering. They got speckled, strokes were missing, really ugly.
That's interesting. I've used EXA before, and didn't find it to provide any noticable increase in the speed of compositing effects, but it definitely didn't mess up fonts like that. If I get it working I guess I'll be able to tell you if it's specific to radeon...
kth5 wrote:First of all, you can force either of the two 2D acceleration mechanisms, not both. Even though the X startup loads both that doesn't mean it uses both or the two conflict, it's just a method of letting it fall back gracefully just in case something goes wrong.
Okay, thanks for clearing that up. -
[SOLVED] After upgrade gdm and Gnome don't work.
Hi,
after I did an upgrade I had some ldconfig: errors and fixed them all using pkgfile and reinstallation of quite some packages.
But now starting gdm with
# systemctl start gdm
only leads to a black screen with a cross shaped cursor I can move. Nothing more.
Xorg works -- I'm writing this post from KDE.
I reinstalled gnome and gnome-extra. Still no success.
System is up to date.
Hopefully my logs will help, I have no idea what to do. Thanks for any help. :)
/var/log/Xorg.0.log
[ 384.588]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 384.588] X Protocol Version 11, Revision 0
[ 384.588] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 384.588] Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
[ 384.588] Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 384.588] Build Date: 17 April 2013 02:37:06PM
[ 384.588]
[ 384.588] Current version of pixman: 0.30.0
[ 384.588] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 384.588] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 384.589] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 9 00:18:24 2013
[ 384.589] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 384.589] (==) No Layout section. Using the first Screen section.
[ 384.589] (==) No screen section available. Using defaults.
[ 384.589] (**) |-->Screen "Default Screen Section" (0)
[ 384.589] (**) | |-->Monitor "<default monitor>"
[ 384.590] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 384.590] (**) | |-->Device "Intel Graphics"
[ 384.590] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 384.590] (==) Automatically adding devices
[ 384.590] (==) Automatically enabling devices
[ 384.590] (==) Automatically adding GPU devices
[ 384.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 384.590] Entry deleted from font path.
[ 384.590] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 384.590] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/
[ 384.590] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 384.590] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 384.590] (II) Loader magic: 0x7fcc20
[ 384.590] (II) Module ABI versions:
[ 384.590] X.Org ANSI C Emulation: 0.4
[ 384.590] X.Org Video Driver: 14.1
[ 384.590] X.Org XInput driver : 19.1
[ 384.590] X.Org Server Extension : 7.0
[ 384.591] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 384.594] (--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
[ 384.594] Initializing built-in extension Generic Event Extension
[ 384.594] Initializing built-in extension SHAPE
[ 384.594] Initializing built-in extension MIT-SHM
[ 384.594] Initializing built-in extension XInputExtension
[ 384.594] Initializing built-in extension XTEST
[ 384.594] Initializing built-in extension BIG-REQUESTS
[ 384.594] Initializing built-in extension SYNC
[ 384.594] Initializing built-in extension XKEYBOARD
[ 384.594] Initializing built-in extension XC-MISC
[ 384.594] Initializing built-in extension SECURITY
[ 384.594] Initializing built-in extension XINERAMA
[ 384.594] Initializing built-in extension XFIXES
[ 384.594] Initializing built-in extension RENDER
[ 384.594] Initializing built-in extension RANDR
[ 384.594] Initializing built-in extension COMPOSITE
[ 384.594] Initializing built-in extension DAMAGE
[ 384.594] Initializing built-in extension MIT-SCREEN-SAVER
[ 384.594] Initializing built-in extension DOUBLE-BUFFER
[ 384.594] Initializing built-in extension RECORD
[ 384.595] Initializing built-in extension DPMS
[ 384.595] Initializing built-in extension X-Resource
[ 384.595] Initializing built-in extension XVideo
[ 384.595] Initializing built-in extension XVideo-MotionCompensation
[ 384.595] Initializing built-in extension XFree86-VidModeExtension
[ 384.595] Initializing built-in extension XFree86-DGA
[ 384.595] Initializing built-in extension XFree86-DRI
[ 384.595] Initializing built-in extension DRI2
[ 384.595] (II) LoadModule: "glx"
[ 384.595] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 384.595] (II) Module glx: vendor="X.Org Foundation"
[ 384.595] compiled for 1.14.1, module version = 1.0.0
[ 384.595] ABI class: X.Org Server Extension, version 7.0
[ 384.595] (==) AIGLX enabled
[ 384.596] Loading extension GLX
[ 384.596] (II) LoadModule: "intel"
[ 384.596] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 384.596] (II) Module intel: vendor="X.Org Foundation"
[ 384.596] compiled for 1.14.1, module version = 2.21.9
[ 384.596] Module class: X.Org Video Driver
[ 384.596] ABI class: X.Org Video Driver, version 14.1
[ 384.596] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 384.597] (++) using VT number 1
[ 384.602] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 384.602] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 384.602] (==) intel(0): RGB weight 888
[ 384.602] (==) intel(0): Default visual is TrueColor
[ 384.602] (**) intel(0): Option "AccelMethod" "sna"
[ 384.603] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 384.603] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 384.603] (**) intel(0): Framebuffer tiled
[ 384.603] (**) intel(0): Pixmaps tiled
[ 384.603] (**) intel(0): "Tear free" disabled
[ 384.603] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 384.604] (II) intel(0): Output eDP1 has no monitor section
[ 384.604] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 384.605] (II) intel(0): Output VGA1 has no monitor section
[ 384.605] (II) intel(0): Output HDMI1 has no monitor section
[ 384.605] (II) intel(0): Output DP1 has no monitor section
[ 384.606] (II) intel(0): EDID for output eDP1
[ 384.606] (II) intel(0): Manufacturer: SEC Model: 3546 Serial#: 0
[ 384.606] (II) intel(0): Year: 2011 Week: 0
[ 384.606] (II) intel(0): EDID Version: 1.4
[ 384.606] (II) intel(0): Digital Display Input
[ 384.606] (II) intel(0): 8 bits per channel
[ 384.606] (II) intel(0): Digital interface is DisplayPort
[ 384.606] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 384.606] (II) intel(0): Gamma: 2.20
[ 384.606] (II) intel(0): No DPMS capabilities specified
[ 384.606] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 384.606] (II) intel(0): First detailed timing is preferred mode
[ 384.606] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 384.606] (II) intel(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.540
[ 384.606] (II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
[ 384.606] (II) intel(0): Manufacturer's mask: 0
[ 384.606] (II) intel(0): Supported detailed timing:
[ 384.606] (II) intel(0): clock: 100.4 MHz Image Size: 293 x 165 mm
[ 384.606] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1792 h_border: 0
[ 384.606] (II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 v_blanking: 932 v_border: 0
[ 384.606] (II) intel(0): Unknown vendor-specific block f
[ 384.606] (II) intel(0): SAMSUNG
[ 384.606] (II) intel(0): LSN133KL018
[ 384.606] (II) intel(0): EDID (in hex):
[ 384.606] (II) intel(0): 00ffffffffffff004ca3463500000000
[ 384.606] (II) intel(0): 00150104a51d10780209e59757548a27
[ 384.606] (II) intel(0): 22505400000001010101010101010101
[ 384.606] (II) intel(0): 010101010101382740c0608420303020
[ 384.606] (II) intel(0): 250025a5100000190000000f00000000
[ 384.606] (II) intel(0): 000000000028800a1e00000000fe0053
[ 384.606] (II) intel(0): 414d53554e470a2020202020000000fe
[ 384.606] (II) intel(0): 004c534e3133334b4c3031380a200003
[ 384.606] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 384.606] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 384.606] (II) intel(0): Printing probed modes for output eDP1
[ 384.606] (II) intel(0): Modeline "1600x900"x60.1 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 384.606] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 384.606] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 384.606] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 384.606] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 384.608] (II) intel(0): EDID for output VGA1
[ 384.608] (II) intel(0): EDID for output HDMI1
[ 384.608] (II) intel(0): EDID for output DP1
[ 384.608] (II) intel(0): Output eDP1 connected
[ 384.608] (II) intel(0): Output VGA1 disconnected
[ 384.608] (II) intel(0): Output HDMI1 disconnected
[ 384.608] (II) intel(0): Output DP1 disconnected
[ 384.608] (II) intel(0): Using exact sizes for initial modes
[ 384.608] (II) intel(0): Output eDP1 using initial mode 1600x900
[ 384.608] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 384.608] (==) intel(0): DPI set to (96, 96)
[ 384.608] (II) Loading sub module "dri2"
[ 384.608] (II) LoadModule: "dri2"
[ 384.608] (II) Module "dri2" already built-in
[ 384.608] (==) Depth 24 pixmap format is 32 bpp
[ 384.608] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 384.608] (==) intel(0): Backing store disabled
[ 384.608] (==) intel(0): Silken mouse enabled
[ 384.608] (II) intel(0): HW Cursor enabled
[ 384.608] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 386.414] (==) intel(0): DPMS enabled
[ 386.414] (II) intel(0): [DRI2] Setup complete
[ 386.414] (II) intel(0): [DRI2] DRI driver: i965
[ 386.414] (II) intel(0): direct rendering: DRI2 Enabled
[ 386.414] (==) intel(0): hotplug detection: "enabled"
[ 386.415] (--) RandR disabled
[ 386.430] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 386.430] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 386.430] (II) AIGLX: enabled GLX_ARB_create_context
[ 386.430] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 386.430] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 386.430] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 386.430] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 386.430] (II) AIGLX: Loaded and initialized i965
[ 386.430] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 386.430] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
[ 386.446] (II) intel(0): Setting screen physical size to 423 x 238
[ 386.508] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 386.508] (**) Power Button: Applying InputClass "system-keyboard"
[ 386.508] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 386.508] (II) LoadModule: "evdev"
[ 386.509] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 386.509] (II) Module evdev: vendor="X.Org Foundation"
[ 386.509] compiled for 1.14.0, module version = 2.8.0
[ 386.509] Module class: X.Org XInput Driver
[ 386.509] ABI class: X.Org XInput driver, version 19.1
[ 386.509] (II) Using input driver 'evdev' for 'Power Button'
[ 386.509] (**) Power Button: always reports core events
[ 386.509] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 386.509] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 386.509] (--) evdev: Power Button: Found keys
[ 386.509] (II) evdev: Power Button: Configuring as keyboard
[ 386.509] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 386.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 386.510] (**) Option "xkb_rules" "evdev"
[ 386.510] (**) Option "xkb_model" "evdev"
[ 386.510] (**) Option "xkb_layout" "de"
[ 386.535] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 386.535] (**) Video Bus: Applying InputClass "system-keyboard"
[ 386.535] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 386.535] (II) Using input driver 'evdev' for 'Video Bus'
[ 386.535] (**) Video Bus: always reports core events
[ 386.535] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 386.535] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 386.535] (--) evdev: Video Bus: Found keys
[ 386.535] (II) evdev: Video Bus: Configuring as keyboard
[ 386.535] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event10"
[ 386.535] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 386.535] (**) Option "xkb_rules" "evdev"
[ 386.535] (**) Option "xkb_model" "evdev"
[ 386.535] (**) Option "xkb_layout" "de"
[ 386.536] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 386.536] (**) Power Button: Applying InputClass "system-keyboard"
[ 386.536] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 386.536] (II) Using input driver 'evdev' for 'Power Button'
[ 386.536] (**) Power Button: always reports core events
[ 386.536] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 386.536] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 386.536] (--) evdev: Power Button: Found keys
[ 386.536] (II) evdev: Power Button: Configuring as keyboard
[ 386.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 386.536] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 386.536] (**) Option "xkb_rules" "evdev"
[ 386.536] (**) Option "xkb_model" "evdev"
[ 386.536] (**) Option "xkb_layout" "de"
[ 386.536] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 386.536] (II) No input driver specified, ignoring this device.
[ 386.536] (II) This device may have been added with another device file.
[ 386.537] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 386.537] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[ 386.537] (II) No input driver specified, ignoring this device.
[ 386.537] (II) This device may have been added with another device file.
[ 386.538] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 386.538] (II) No input driver specified, ignoring this device.
[ 386.538] (II) This device may have been added with another device file.
[ 386.538] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 386.538] (II) No input driver specified, ignoring this device.
[ 386.538] (II) This device may have been added with another device file.
[ 386.539] (II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
[ 386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
[ 386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
[ 386.539] (II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
[ 386.539] (**) Webcam SC-13HDL11624N: always reports core events
[ 386.539] (**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
[ 386.539] (--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
[ 386.539] (--) evdev: Webcam SC-13HDL11624N: Found keys
[ 386.539] (II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
[ 386.539] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input8/event8"
[ 386.539] (II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
[ 386.539] (**) Option "xkb_rules" "evdev"
[ 386.539] (**) Option "xkb_model" "evdev"
[ 386.539] (**) Option "xkb_layout" "de"
[ 386.540] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 386.540] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 386.541] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 386.541] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 386.541] (**) AT Translated Set 2 keyboard: always reports core events
[ 386.541] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 386.541] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 386.541] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 386.541] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 386.541] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 386.541] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 386.541] (**) Option "xkb_rules" "evdev"
[ 386.541] (**) Option "xkb_model" "evdev"
[ 386.541] (**) Option "xkb_layout" "de"
[ 386.542] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
[ 386.542] (II) LoadModule: "synaptics"
[ 386.542] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 386.543] (II) Module synaptics: vendor="X.Org Foundation"
[ 386.543] compiled for 1.14.1, module version = 1.7.1
[ 386.543] Module class: X.Org XInput Driver
[ 386.543] ABI class: X.Org XInput driver, version 19.1
[ 386.543] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 386.543] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 386.543] (**) Option "Device" "/dev/input/event9"
[ 386.563] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 386.563] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
[ 386.563] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 386.564] (**) Option "TapButton1" "1"
[ 386.564] (**) Option "TapButton2" "2"
[ 386.564] (**) Option "TapButton3" "3"
[ 386.564] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
[ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 386.564] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 386.570] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 386.570] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
[ 386.570] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 386.571] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 386.572] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 386.572] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 386.573] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 386.573] (II) No input driver specified, ignoring this device.
[ 386.573] (II) This device may have been added with another device file.
[ 386.899] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 386.899] (II) intel(0): Printing DDC gathered Modelines:
[ 386.899] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 387.041] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 387.041] (II) intel(0): Printing DDC gathered Modelines:
[ 387.041] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 387.069] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 387.069] (II) intel(0): Printing DDC gathered Modelines:
[ 387.069] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 389.740] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 391.348] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 391.348] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
[ 391.367] (II) intel(0): EDID vendor "SEC", prod id 13638
[ 391.367] (II) intel(0): Printing DDC gathered Modelines:
[ 391.367] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
[ 391.369] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 397.614] (II) AIGLX: Suspending AIGLX clients for VT switch
and
/var/log/gdm/:0.log
X.Org X Server 1.14.1
Release Date: 2013-04-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.8.7-1-ARCH x86_64
Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Build Date: 17 April 2013 02:37:06PM
Current version of pixman: 0.30.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 9 00:18:24 2013
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Intel Graphics"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) config/udev: Adding drm device (/dev/dri/card0)
(--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 1.0.0
(==) AIGLX enabled
Loading extension GLX
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 2.21.9
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
(++) using VT number 1
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
(--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
(**) intel(0): Framebuffer tiled
(**) intel(0): Pixmaps tiled
(**) intel(0): "Tear free" disabled
(**) intel(0): Forcing per-crtc-pixmaps? no
(II) intel(0): Output eDP1 has no monitor section
(--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): EDID for output eDP1
(II) intel(0): Manufacturer: SEC Model: 3546 Serial#: 0
(II) intel(0): Year: 2011 Week: 0
(II) intel(0): EDID Version: 1.4
(II) intel(0): Digital Display Input
(II) intel(0): 8 bits per channel
(II) intel(0): Digital interface is DisplayPort
(II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): Preferred mode is native pixel format and refresh rate
(II) intel(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.540
(II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 100.4 MHz Image Size: 293 x 165 mm
(II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1792 h_border: 0
(II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 v_blanking: 932 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): SAMSUNG
(II) intel(0): LSN133KL018
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004ca3463500000000
(II) intel(0): 00150104a51d10780209e59757548a27
(II) intel(0): 22505400000001010101010101010101
(II) intel(0): 010101010101382740c0608420303020
(II) intel(0): 250025a5100000190000000f00000000
(II) intel(0): 000000000028800a1e00000000fe0053
(II) intel(0): 414d53554e470a2020202020000000fe
(II) intel(0): 004c534e3133334b4c3031380a200003
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output eDP1
(II) intel(0): Modeline "1600x900"x60.1 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): Output eDP1 connected
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output eDP1 using initial mode 1600x900
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): DPI set to (96, 96)
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): HW Cursor enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(II) intel(0): [DRI2] Setup complete
(II) intel(0): [DRI2] DRI driver: i965
(II) intel(0): direct rendering: DRI2 Enabled
(==) intel(0): hotplug detection: "enabled"
(--) RandR disabled
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_INTEL_swap_event
(II) AIGLX: enabled GLX_ARB_create_context
(II) AIGLX: enabled GLX_ARB_create_context_profile
(II) AIGLX: enabled GLX_EXT_create_context_es2_profile
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized i965
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
(II) intel(0): Setting screen physical size to 423 x 238
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "system-keyboard"
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.14.0, module version = 2.8.0
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event4"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) config/udev: Adding input device Video Bus (/dev/input/event10)
(**) Video Bus: Applying InputClass "system-keyboard"
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Video Bus'
(**) Video Bus: always reports core events
(**) evdev: Video Bus: Device: "/dev/input/event10"
(--) evdev: Video Bus: Vendor 0 Product 0x6
(--) evdev: Video Bus: Found keys
(II) evdev: Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "system-keyboard"
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event3"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
(II) config/udev: Adding input device Lid Switch (/dev/input/event2)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
(**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
(**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
(**) Webcam SC-13HDL11624N: always reports core events
(**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
(--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
(--) evdev: Webcam SC-13HDL11624N: Found keys
(II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
(II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
(**) AT Translated Set 2 keyboard: always reports core events
(**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
(--) evdev: AT Translated Set 2 keyboard: Found keys
(II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.14.1, module version = 1.7.1
(II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
(--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
(--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
(--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
(--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
(--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
(--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
(**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
(**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
(**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
(II) config/udev: Adding input device PC Speaker (/dev/input/event1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by Duxon (2013-06-15 16:17:35)Finally managed fixed it.
libcanberra-pulse from [extra] was broken. I reinstalled it with --force.
Likely that came with the recent pulseaudio upgrade. -
Heavy slowdowns in Xorg and Terminal
Hello folks,
Yesterday I put together a new system (Dual Arch and Windows 7) and I am running into a few issues and I have no real idea where exactly to look for.
My system:
CPU: Intel i7 4790k
Mainboard: MSI Z87-G43
RAM: 16GB DDR3-2400
Videocard: MSI NVidia GTX 970
Drives: SSD Samsung 850 (/dev/sda1 = / , /dev/sda2 = Windows), HDD as data partitions for both systems
Power Supply Unit has 600W
The installation of both Windows (which I installed first) and and Arch went without a problem and I followed the Installation guide step-by-step.
The video card runs via the nvidia driver. I'm Using plasma-next/kde and sddm to login.
I have two monitors, both connected to the GTX card - one via HDMI, one via DVI.
Here's where the problems start:
Soon as Xorg launches (via sddm or lightdm), my whole system starts to run extremely slow. First I thought it was only Xorg acting up. Animations run extremely slow, moving windows is slow, too - even keyboard input and cursor movements shutter. This seems to be triggered as well by opening fullscreen windows, opening the KDE start menu, the yakuake dropdown console, etc. However if I switch over to a virtual terminal scrolling text there (dmesg for example) runs extremely slow, too.
Windows SEEMS to run fine from what I can tell (also 3D applications there seem to work just fine).
First I thought the internal video chip was active. However the i915 module is not loaded and the integrated video card also does not show up in lspci. HOWEVER Xorg.0.log shows way more monitor connectors on NVIDIA(GPU-0) then my card actually has - it lists the connectors of the integrated video! And thes elistings in the Xorg.0.log repeat over and over and over which what makes me believe the issue MAY be connected to the internal video chip nonetheless. But again, the modules don't seem to be loaded and in the BIOS of the board I cannot disable the integrated video - aside from setting PEG as the primary video interface (which I did).
nvidia-settings was also segfaulting on numerous occasions which was however fixed by installing the intel-ucode package and redoing the grub.cfg.
Apart from that, I an pretty helpless right now and I hope someone here may be able to give me a few hints on what to look for.
Here are some logs that hopefully are helpful to you to help me.
journalctl -p 0..3 -xn is empty.
Xorg.0.log (note the repeating lines of NVIDIA(GPU-0)):
[ 16.395]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 16.395] X Protocol Version 11, Revision 0
[ 16.395] Build Operating System: Linux 3.19.2-1-ARCH x86_64
[ 16.395] Current Operating System: Linux stella 4.0.5-1-ARCH #1 SMP PREEMPT Sat Jun 6 18:37:49 CEST 2015 x86_64
[ 16.395] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=44dc1d5b-8ee3-4e0b-b98e-88cc6fb27f40 rw quiet
[ 16.395] Build Date: 14 April 2015 10:34:18AM
[ 16.395]
[ 16.395] Current version of pixman: 0.32.6
[ 16.395] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 16.395] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.395] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 7 12:20:38 2015
[ 16.396] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 16.396] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 16.397] (==) ServerLayout "Layout0"
[ 16.397] (**) |-->Screen "Screen0" (0)
[ 16.397] (**) | |-->Monitor "Monitor0"
[ 16.397] (**) | |-->Device "Device0"
[ 16.397] (**) Option "Xinerama" "0"
[ 16.397] (==) Automatically adding devices
[ 16.397] (==) Automatically enabling devices
[ 16.397] (==) Automatically adding GPU devices
[ 16.400] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 16.400] Entry deleted from font path.
[ 16.400] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 16.400] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 16.400] Entry deleted from font path.
[ 16.400] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 16.400] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 16.400] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 16.400] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.400] (II) Loader magic: 0x815d80
[ 16.400] (II) Module ABI versions:
[ 16.400] X.Org ANSI C Emulation: 0.4
[ 16.400] X.Org Video Driver: 19.0
[ 16.400] X.Org XInput driver : 21.0
[ 16.400] X.Org Server Extension : 9.0
[ 16.401] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 16.401] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 16.402] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 16 paused 0
[ 16.402] (--) PCI:*(0:1:0:0) 10de:13c2:1462:3160 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 16.402] (II) Open ACPI successful (/var/run/acpid.socket)
[ 16.402] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 16.402] (II) LoadModule: "dbe"
[ 16.402] (II) Module "dbe" already built-in
[ 16.402] (II) LoadModule: "extmod"
[ 16.402] (II) Module "extmod" already built-in
[ 16.402] (II) LoadModule: "glx"
[ 16.403] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.478] (II) Module glx: vendor="NVIDIA Corporation"
[ 16.478] compiled for 4.0.2, module version = 1.0.0
[ 16.478] Module class: X.Org Server Extension
[ 16.478] (II) NVIDIA GLX Module 352.09 Tue May 12 14:17:34 PDT 2015
[ 16.479] (II) LoadModule: "nvidia"
[ 16.479] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.483] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 16.483] compiled for 4.0.2, module version = 1.0.0
[ 16.483] Module class: X.Org Video Driver
[ 16.484] (II) NVIDIA dlloader X Driver 352.09 Tue May 12 13:54:27 PDT 2015
[ 16.484] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 16.484] (++) using VT number 1
[ 16.485] (II) Loading sub module "fb"
[ 16.485] (II) LoadModule: "fb"
[ 16.485] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.485] (II) Module fb: vendor="X.Org Foundation"
[ 16.485] compiled for 1.17.1, module version = 1.0.0
[ 16.485] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.485] (II) Loading sub module "wfb"
[ 16.485] (II) LoadModule: "wfb"
[ 16.486] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.486] (II) Module wfb: vendor="X.Org Foundation"
[ 16.486] compiled for 1.17.1, module version = 1.0.0
[ 16.486] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.486] (II) Loading sub module "ramdac"
[ 16.486] (II) LoadModule: "ramdac"
[ 16.486] (II) Module "ramdac" already built-in
[ 16.487] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 16.487] (==) NVIDIA(0): RGB weight 888
[ 16.487] (==) NVIDIA(0): Default visual is TrueColor
[ 16.487] (**) NVIDIA(0): Using gamma correction (0.8, 0.8, 0.7)
[ 16.488] (**) NVIDIA(0): Option "Stereo" "0"
[ 16.488] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-1"
[ 16.488] (**) NVIDIA(0): Option "SLI" "Off"
[ 16.488] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 16.488] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 16.488] (**) NVIDIA(0): Stereo disabled by request
[ 16.488] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 16.488] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 16.488] (**) NVIDIA(0): Option "MetaModes" "HDMI-0: 1920x1080 +0+0 { ForceCompositionPipeline = On }, DVI-I-1: 1920x1080 +2000+0 { ForceCompositionPipeline = On }"
[ 16.488] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.924] (II) NVIDIA: Allocated GPU:0 (GPU-0c5c1013-4394-3168-6bbd-5aa16358eada) @
[ 18.924] (II) NVIDIA: PCI:0000:01:00.0
[ 18.996] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 18.996] (--) NVIDIA(0): CRT-0
[ 18.996] (--) NVIDIA(0): DFP-0 (boot)
[ 18.996] (--) NVIDIA(0): DFP-1
[ 18.996] (--) NVIDIA(0): DFP-2
[ 18.996] (--) NVIDIA(0): DFP-3
[ 18.996] (--) NVIDIA(0): DFP-4
[ 19.018] (--) NVIDIA(0): CRT-0: disconnected
[ 19.018] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 19.018] (--) NVIDIA(0):
[ 19.065] (--) NVIDIA(0): LG Electronics W2361 (DFP-0): connected
[ 19.065] (--) NVIDIA(0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 19.065] (--) NVIDIA(0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 19.065] (--) NVIDIA(0):
[ 19.108] (--) NVIDIA(0): BenQ GL2450H (DFP-1): connected
[ 19.108] (--) NVIDIA(0): BenQ GL2450H (DFP-1): Internal TMDS
[ 19.108] (--) NVIDIA(0): BenQ GL2450H (DFP-1): 165.0 MHz maximum pixel clock
[ 19.108] (--) NVIDIA(0):
[ 19.108] (--) NVIDIA(0): DFP-2: disconnected
[ 19.108] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[ 19.108] (--) NVIDIA(0): DFP-2: 960.0 MHz maximum pixel clock
[ 19.108] (--) NVIDIA(0):
[ 19.109] (--) NVIDIA(0): DFP-3: disconnected
[ 19.109] (--) NVIDIA(0): DFP-3: Internal TMDS
[ 19.109] (--) NVIDIA(0): DFP-3: 165.0 MHz maximum pixel clock
[ 19.109] (--) NVIDIA(0):
[ 19.110] (--) NVIDIA(0): DFP-4: disconnected
[ 19.110] (--) NVIDIA(0): DFP-4: Internal TMDS
[ 19.110] (--) NVIDIA(0): DFP-4: 330.0 MHz maximum pixel clock
[ 19.110] (--) NVIDIA(0):
[ 19.110] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 19.129] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970 (GM204-A) at PCI:1:0:0 (GPU-0)
[ 19.129] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 19.130] (--) NVIDIA(0): VideoBIOS: 84.04.36.00.f1
[ 19.130] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 19.278] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.278] (**) NVIDIA(0): device LG Electronics W2361 (DFP-0) (Using EDID
[ 19.278] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 19.293] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.293] (**) NVIDIA(0): device BenQ GL2450H (DFP-1) (Using EDID frequencies has
[ 19.293] (**) NVIDIA(0): been enabled on all display devices.)
[ 19.334] (II) NVIDIA(0): Validated MetaModes:
[ 19.334] (II) NVIDIA(0):
[ 19.334] (II) NVIDIA(0): "HDMI-0:1920x1080+0+0{ForceCompositionPipeline=On},DVI-I-1:1920x1080+2000+0{ForceCompositionPipeline=On}"
[ 19.334] (II) NVIDIA(0): Virtual screen size determined to be 3920 x 1080
[ 19.429] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[ 19.429] (--) NVIDIA(0): option
[ 19.429] (--) Depth 24 pixmap format is 32 bpp
[ 19.443] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 19.443] (II) NVIDIA: access.
[ 19.518] (II) NVIDIA(0): Setting mode "HDMI-0:1920x1080+0+0{ForceCompositionPipeline=On},DVI-I-1:1920x1080+2000+0{ForceCompositionPipeline=On}"
[ 19.709] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 19.709] (==) NVIDIA(0): Backing store enabled
[ 19.709] (==) NVIDIA(0): Silken mouse enabled
[ 19.710] (**) NVIDIA(0): DPMS enabled
[ 19.715] (II) Loading sub module "dri2"
[ 19.715] (II) LoadModule: "dri2"
[ 19.715] (II) Module "dri2" already built-in
[ 19.715] (II) NVIDIA(0): [DRI2] Setup complete
[ 19.715] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 19.715] (--) RandR disabled
[ 19.717] (II) Initializing extension GLX
[ 19.717] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 19.779] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.779] (II) LoadModule: "evdev"
[ 19.779] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.780] (II) Module evdev: vendor="X.Org Foundation"
[ 19.780] compiled for 1.17.1, module version = 2.9.2
[ 19.780] Module class: X.Org XInput Driver
[ 19.780] ABI class: X.Org XInput driver, version 21.0
[ 19.781] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 40 paused 0
[ 19.781] (II) Using input driver 'evdev' for 'Power Button'
[ 19.781] (**) Power Button: always reports core events
[ 19.781] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 19.781] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.781] (--) evdev: Power Button: Found keys
[ 19.781] (II) evdev: Power Button: Configuring as keyboard
[ 19.781] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 19.781] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.781] (**) Option "xkb_rules" "evdev"
[ 19.781] (**) Option "xkb_model" "pc104"
[ 19.781] (**) Option "xkb_layout" "us"
[ 19.790] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 19.790] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.790] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 41 paused 0
[ 19.790] (II) Using input driver 'evdev' for 'Power Button'
[ 19.790] (**) Power Button: always reports core events
[ 19.790] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 19.790] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.790] (--) evdev: Power Button: Found keys
[ 19.790] (II) evdev: Power Button: Configuring as keyboard
[ 19.790] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[ 19.790] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 19.790] (**) Option "xkb_rules" "evdev"
[ 19.790] (**) Option "xkb_model" "pc104"
[ 19.790] (**) Option "xkb_layout" "us"
[ 19.790] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[ 19.790] (II) No input driver specified, ignoring this device.
[ 19.790] (II) This device may have been added with another device file.
[ 19.790] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[ 19.790] (II) No input driver specified, ignoring this device.
[ 19.790] (II) This device may have been added with another device file.
[ 19.790] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[ 19.790] (II) No input driver specified, ignoring this device.
[ 19.790] (II) This device may have been added with another device file.
[ 19.790] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[ 19.790] (II) No input driver specified, ignoring this device.
[ 19.790] (II) This device may have been added with another device file.
[ 19.791] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event17)
[ 19.791] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 19.843] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 42 paused 0
[ 19.843] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 19.843] (**) Logitech USB Receiver: always reports core events
[ 19.843] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event17"
[ 19.843] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc537
[ 19.843] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 19.843] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 19.843] (--) evdev: Logitech USB Receiver: Found relative axes
[ 19.843] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 19.843] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 19.843] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 19.843] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 19.843] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.843] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/0003:046D:C537.0006/input/input20/event17"
[ 19.843] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[ 19.843] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 19.843] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 19.843] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 19.843] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 19.843] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 19.843] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 19.843] (II) No input driver specified, ignoring this device.
[ 19.843] (II) This device may have been added with another device file.
[ 19.843] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event18)
[ 19.843] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 19.844] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 43 paused 0
[ 19.844] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 19.844] (**) Logitech USB Receiver: always reports core events
[ 19.844] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event18"
[ 19.844] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc537
[ 19.844] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 19.844] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 19.844] (--) evdev: Logitech USB Receiver: Found relative axes
[ 19.844] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 19.844] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 19.844] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 19.844] (--) evdev: Logitech USB Receiver: Found keys
[ 19.844] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 19.844] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 19.844] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 19.844] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 19.844] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.844] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.1/0003:046D:C537.0007/input/input21/event18"
[ 19.844] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 19.844] (**) Option "xkb_rules" "evdev"
[ 19.844] (**) Option "xkb_model" "pc104"
[ 19.844] (**) Option "xkb_layout" "us"
[ 19.844] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 19.844] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 19.844] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 19.844] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 19.844] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 19.844] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 19.844] (II) config/udev: Adding input device Logitech K360 (/dev/input/event19)
[ 19.844] (**) Logitech K360: Applying InputClass "evdev keyboard catchall"
[ 19.844] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 44 paused 0
[ 19.844] (II) Using input driver 'evdev' for 'Logitech K360'
[ 19.844] (**) Logitech K360: always reports core events
[ 19.844] (**) evdev: Logitech K360: Device: "/dev/input/event19"
[ 19.844] (--) evdev: Logitech K360: Vendor 0x46d Product 0x4004
[ 19.844] (--) evdev: Logitech K360: Found 1 mouse buttons
[ 19.844] (--) evdev: Logitech K360: Found scroll wheel(s)
[ 19.844] (--) evdev: Logitech K360: Found relative axes
[ 19.844] (II) evdev: Logitech K360: Forcing relative x/y axes to exist.
[ 19.844] (--) evdev: Logitech K360: Found absolute axes
[ 19.844] (II) evdev: Logitech K360: Forcing absolute x/y axes to exist.
[ 19.844] (--) evdev: Logitech K360: Found keys
[ 19.844] (II) evdev: Logitech K360: Configuring as mouse
[ 19.844] (II) evdev: Logitech K360: Configuring as keyboard
[ 19.844] (II) evdev: Logitech K360: Adding scrollwheel support
[ 19.844] (**) evdev: Logitech K360: YAxisMapping: buttons 4 and 5
[ 19.844] (**) evdev: Logitech K360: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.844] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/0003:046D:4004.0008/input/input22/event19"
[ 19.844] (II) XINPUT: Adding extended input device "Logitech K360" (type: KEYBOARD, id 10)
[ 19.844] (**) Option "xkb_rules" "evdev"
[ 19.844] (**) Option "xkb_model" "pc104"
[ 19.844] (**) Option "xkb_layout" "us"
[ 19.844] (II) evdev: Logitech K360: initialized for relative axes.
[ 19.844] (WW) evdev: Logitech K360: ignoring absolute axes.
[ 19.845] (**) Logitech K360: (accel) keeping acceleration scheme 1
[ 19.845] (**) Logitech K360: (accel) acceleration profile 0
[ 19.845] (**) Logitech K360: (accel) acceleration factor: 2.000
[ 19.845] (**) Logitech K360: (accel) acceleration threshold: 4
[ 19.845] (II) config/udev: Adding input device Saitek Cyborg X (/dev/input/event15)
[ 19.845] (II) No input driver specified, ignoring this device.
[ 19.845] (II) This device may have been added with another device file.
[ 19.845] (II) config/udev: Adding input device Saitek Cyborg X (/dev/input/js0)
[ 19.845] (II) No input driver specified, ignoring this device.
[ 19.845] (II) This device may have been added with another device file.
[ 19.845] (II) config/udev: Adding input device Blue Microphones Yeti Stereo Microphone (/dev/input/event16)
[ 19.845] (**) Blue Microphones Yeti Stereo Microphone: Applying InputClass "evdev keyboard catchall"
[ 19.845] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 45 paused 0
[ 19.845] (II) Using input driver 'evdev' for 'Blue Microphones Yeti Stereo Microphone'
[ 19.845] (**) Blue Microphones Yeti Stereo Microphone: always reports core events
[ 19.845] (**) evdev: Blue Microphones Yeti Stereo Microphone: Device: "/dev/input/event16"
[ 19.845] (--) evdev: Blue Microphones Yeti Stereo Microphone: Vendor 0xb58e Product 0x9e84
[ 19.845] (--) evdev: Blue Microphones Yeti Stereo Microphone: Found 1 mouse buttons
[ 19.845] (--) evdev: Blue Microphones Yeti Stereo Microphone: Found absolute axes
[ 19.845] (--) evdev: Blue Microphones Yeti Stereo Microphone: Found absolute multitouch axes
[ 19.845] (II) evdev: Blue Microphones Yeti Stereo Microphone: Forcing absolute x/y axes to exist.
[ 19.845] (--) evdev: Blue Microphones Yeti Stereo Microphone: Found keys
[ 19.845] (II) evdev: Blue Microphones Yeti Stereo Microphone: Forcing relative x/y axes to exist.
[ 19.845] (II) evdev: Blue Microphones Yeti Stereo Microphone: Configuring as mouse
[ 19.845] (II) evdev: Blue Microphones Yeti Stereo Microphone: Configuring as keyboard
[ 19.845] (**) evdev: Blue Microphones Yeti Stereo Microphone: YAxisMapping: buttons 4 and 5
[ 19.845] (**) evdev: Blue Microphones Yeti Stereo Microphone: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.845] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.3/0003:B58E:9E84.0005/input/input19/event16"
[ 19.845] (II) XINPUT: Adding extended input device "Blue Microphones Yeti Stereo Microphone" (type: KEYBOARD, id 11)
[ 19.845] (**) Option "xkb_rules" "evdev"
[ 19.845] (**) Option "xkb_model" "pc104"
[ 19.845] (**) Option "xkb_layout" "us"
[ 19.845] (II) evdev: Blue Microphones Yeti Stereo Microphone: initialized for absolute axes.
[ 19.845] (**) Blue Microphones Yeti Stereo Microphone: (accel) keeping acceleration scheme 1
[ 19.845] (**) Blue Microphones Yeti Stereo Microphone: (accel) acceleration profile 0
[ 19.845] (**) Blue Microphones Yeti Stereo Microphone: (accel) acceleration factor: 2.000
[ 19.845] (**) Blue Microphones Yeti Stereo Microphone: (accel) acceleration threshold: 4
[ 19.845] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event7)
[ 19.845] (II) No input driver specified, ignoring this device.
[ 19.845] (II) This device may have been added with another device file.
[ 19.846] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event8)
[ 19.846] (II) No input driver specified, ignoring this device.
[ 19.846] (II) This device may have been added with another device file.
[ 19.846] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event9)
[ 19.846] (II) No input driver specified, ignoring this device.
[ 19.846] (II) This device may have been added with another device file.
[ 19.846] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 19.846] (II) No input driver specified, ignoring this device.
[ 19.846] (II) This device may have been added with another device file.
[ 19.846] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event3)
[ 19.846] (II) No input driver specified, ignoring this device.
[ 19.846] (II) This device may have been added with another device file.
[ 19.846] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event4)
[ 19.846] (II) No input driver specified, ignoring this device.
[ 19.846] (II) This device may have been added with another device file.
[ 19.846] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event5)
[ 19.846] (II) No input driver specified, ignoring this device.
[ 19.846] (II) This device may have been added with another device file.
[ 19.846] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event6)
[ 19.846] (II) No input driver specified, ignoring this device.
[ 19.846] (II) This device may have been added with another device file.
[ 19.846] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 19.846] (II) No input driver specified, ignoring this device.
[ 19.846] (II) This device may have been added with another device file.
[ 19.927] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 19.927] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 19.927] (--) NVIDIA(GPU-0):
[ 19.976] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 19.976] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 19.976] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 19.976] (--) NVIDIA(GPU-0):
[ 20.020] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 20.020] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 20.020] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 20.020] (--) NVIDIA(GPU-0):
[ 20.022] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 20.022] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 20.022] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 20.022] (--) NVIDIA(GPU-0):
[ 20.024] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 20.024] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 20.024] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 20.024] (--) NVIDIA(GPU-0):
[ 20.025] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 20.025] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 20.025] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 20.025] (--) NVIDIA(GPU-0):
[ 20.049] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 20.049] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 20.049] (--) NVIDIA(GPU-0):
[ 20.096] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 20.096] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 20.097] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 20.097] (--) NVIDIA(GPU-0):
[ 20.142] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 20.142] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 20.142] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 20.142] (--) NVIDIA(GPU-0):
[ 20.144] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 20.144] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 20.144] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 20.144] (--) NVIDIA(GPU-0):
[ 20.145] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 20.145] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 20.145] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 20.145] (--) NVIDIA(GPU-0):
[ 20.146] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 20.146] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 20.146] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 20.146] (--) NVIDIA(GPU-0):
[ 20.171] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 20.171] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 20.171] (--) NVIDIA(GPU-0):
[ 20.219] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 20.219] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 20.219] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 20.219] (--) NVIDIA(GPU-0):
[ 20.265] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 20.265] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 20.265] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 20.265] (--) NVIDIA(GPU-0):
[ 20.267] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 20.267] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 20.267] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 20.267] (--) NVIDIA(GPU-0):
[ 20.268] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 20.268] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 20.268] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 20.268] (--) NVIDIA(GPU-0):
[ 20.269] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 20.269] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 20.269] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 20.269] (--) NVIDIA(GPU-0):
[ 27.573] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 27.573] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 27.573] (--) NVIDIA(GPU-0):
[ 27.625] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 27.625] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 27.625] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 27.625] (--) NVIDIA(GPU-0):
[ 27.674] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 27.674] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 27.674] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 27.674] (--) NVIDIA(GPU-0):
[ 27.676] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 27.676] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 27.676] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 27.676] (--) NVIDIA(GPU-0):
[ 27.679] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 27.679] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 27.679] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 27.679] (--) NVIDIA(GPU-0):
[ 27.679] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 27.679] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 27.679] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 27.679] (--) NVIDIA(GPU-0):
[ 27.701] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 27.701] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 27.701] (--) NVIDIA(GPU-0):
[ 27.753] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 27.753] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 27.753] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 27.753] (--) NVIDIA(GPU-0):
[ 27.806] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 27.806] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 27.806] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 27.806] (--) NVIDIA(GPU-0):
[ 27.809] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 27.809] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 27.809] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 27.809] (--) NVIDIA(GPU-0):
[ 27.810] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 27.810] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 27.810] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 27.810] (--) NVIDIA(GPU-0):
[ 27.811] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 27.811] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 27.811] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 27.812] (--) NVIDIA(GPU-0):
[ 27.840] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 27.840] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 27.840] (--) NVIDIA(GPU-0):
[ 27.888] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 27.888] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 27.888] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 27.888] (--) NVIDIA(GPU-0):
[ 27.946] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 27.946] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 27.946] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 27.946] (--) NVIDIA(GPU-0):
[ 27.949] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 27.949] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 27.949] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 27.949] (--) NVIDIA(GPU-0):
[ 27.951] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 27.951] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 27.951] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 27.951] (--) NVIDIA(GPU-0):
[ 27.952] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 27.952] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 27.952] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 27.952] (--) NVIDIA(GPU-0):
[ 28.441] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 28.441] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 28.441] (--) NVIDIA(GPU-0):
[ 28.492] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 28.492] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 28.492] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 28.492] (--) NVIDIA(GPU-0):
[ 28.538] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 28.538] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 28.538] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 28.538] (--) NVIDIA(GPU-0):
[ 28.540] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 28.540] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 28.540] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 28.540] (--) NVIDIA(GPU-0):
[ 28.542] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 28.542] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 28.542] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 28.542] (--) NVIDIA(GPU-0):
[ 28.543] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 28.543] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 28.543] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 28.543] (--) NVIDIA(GPU-0):
[ 28.570] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 28.570] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 28.570] (--) NVIDIA(GPU-0):
[ 28.627] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 28.627] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 28.627] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 28.627] (--) NVIDIA(GPU-0):
[ 28.674] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 28.674] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 28.674] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 28.674] (--) NVIDIA(GPU-0):
[ 28.676] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 28.676] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 28.676] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 28.676] (--) NVIDIA(GPU-0):
[ 28.677] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 28.677] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 28.677] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 28.677] (--) NVIDIA(GPU-0):
[ 28.678] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 28.678] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 28.678] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 28.678] (--) NVIDIA(GPU-0):
[ 28.702] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 28.702] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 28.702] (--) NVIDIA(GPU-0):
[ 28.755] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 28.755] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 28.755] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 28.755] (--) NVIDIA(GPU-0):
[ 28.804] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 28.804] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 28.804] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 28.804] (--) NVIDIA(GPU-0):
[ 28.807] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 28.807] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 28.807] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 28.807] (--) NVIDIA(GPU-0):
[ 28.809] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 28.809] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 28.809] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 28.809] (--) NVIDIA(GPU-0):
[ 28.811] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 28.811] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 28.811] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 28.811] (--) NVIDIA(GPU-0):
[ 28.870] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 28.870] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 28.871] (--) NVIDIA(GPU-0):
[ 28.923] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 28.923] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 28.923] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 28.923] (--) NVIDIA(GPU-0):
[ 28.972] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 28.972] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 28.972] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 28.972] (--) NVIDIA(GPU-0):
[ 28.974] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 28.974] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 28.974] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 28.974] (--) NVIDIA(GPU-0):
[ 28.976] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 28.976] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 28.976] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 28.976] (--) NVIDIA(GPU-0):
[ 28.976] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 28.976] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 28.976] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 28.976] (--) NVIDIA(GPU-0):
[ 29.003] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 29.003] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 29.003] (--) NVIDIA(GPU-0):
[ 29.053] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 29.053] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 29.053] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 29.053] (--) NVIDIA(GPU-0):
[ 29.107] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 29.107] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 29.107] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 29.107] (--) NVIDIA(GPU-0):
[ 29.114] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 29.114] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 29.114] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 29.114] (--) NVIDIA(GPU-0):
[ 29.116] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 29.116] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 29.116] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 29.116] (--) NVIDIA(GPU-0):
[ 29.117] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 29.117] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 29.117] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 29.117] (--) NVIDIA(GPU-0):
[ 29.140] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 29.140] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 29.140] (--) NVIDIA(GPU-0):
[ 29.193] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 29.193] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 29.193] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 29.193] (--) NVIDIA(GPU-0):
[ 29.253] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 29.253] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 29.253] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 29.253] (--) NVIDIA(GPU-0):
[ 29.256] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 29.256] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 29.256] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 29.256] (--) NVIDIA(GPU-0):
[ 29.260] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 29.260] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 29.260] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 29.260] (--) NVIDIA(GPU-0):
[ 29.262] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 29.262] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 29.262] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 29.262] (--) NVIDIA(GPU-0):
[ 29.285] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 29.285] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 29.285] (--) NVIDIA(GPU-0):
[ 29.343] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 29.343] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 29.343] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 29.343] (--) NVIDIA(GPU-0):
[ 29.397] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 29.397] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 29.397] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 29.397] (--) NVIDIA(GPU-0):
[ 29.400] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 29.400] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 29.400] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 29.400] (--) NVIDIA(GPU-0):
[ 29.402] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 29.402] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 29.402] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 29.402] (--) NVIDIA(GPU-0):
[ 29.404] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 29.404] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 29.404] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 29.404] (--) NVIDIA(GPU-0):
[ 29.427] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 29.427] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 29.427] (--) NVIDIA(GPU-0):
[ 29.481] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 29.481] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 29.481] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 29.481] (--) NVIDIA(GPU-0):
[ 29.531] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 29.531] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 29.531] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 29.531] (--) NVIDIA(GPU-0):
[ 29.533] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 29.533] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 29.533] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 29.533] (--) NVIDIA(GPU-0):
[ 29.536] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 29.536] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 29.536] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 29.536] (--) NVIDIA(GPU-0):
[ 29.537] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 29.537] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 29.537] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 29.537] (--) NVIDIA(GPU-0):
[ 29.572] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 29.572] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 29.572] (--) NVIDIA(GPU-0):
[ 29.623] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 29.623] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 29.623] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 29.623] (--) NVIDIA(GPU-0):
[ 29.670] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 29.670] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 29.670] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 29.670] (--) NVIDIA(GPU-0):
[ 29.672] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 29.672] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 29.672] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 29.672] (--) NVIDIA(GPU-0):
[ 29.673] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 29.673] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 29.673] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 29.673] (--) NVIDIA(GPU-0):
[ 29.674] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 29.674] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 29.674] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 29.674] (--) NVIDIA(GPU-0):
[ 29.855] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 29.855] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 29.855] (--) NVIDIA(GPU-0):
[ 29.905] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 29.905] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 29.905] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 29.905] (--) NVIDIA(GPU-0):
[ 29.951] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 29.951] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 29.951] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 29.951] (--) NVIDIA(GPU-0):
[ 29.952] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 29.952] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 29.952] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 29.952] (--) NVIDIA(GPU-0):
[ 29.954] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 29.954] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 29.954] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 29.954] (--) NVIDIA(GPU-0):
[ 29.955] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 29.955] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 29.955] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 29.955] (--) NVIDIA(GPU-0):
[ 29.985] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 29.985] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 29.985] (--) NVIDIA(GPU-0):
[ 30.037] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 30.037] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 30.037] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 30.037] (--) NVIDIA(GPU-0):
[ 30.084] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 30.084] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 30.084] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 30.084] (--) NVIDIA(GPU-0):
[ 30.085] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 30.085] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 30.085] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 30.085] (--) NVIDIA(GPU-0):
[ 30.086] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 30.086] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 30.086] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 30.086] (--) NVIDIA(GPU-0):
[ 30.087] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 30.087] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 30.087] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 30.087] (--) NVIDIA(GPU-0):
[ 30.111] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 30.111] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 30.111] (--) NVIDIA(GPU-0):
[ 30.163] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 30.163] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 30.163] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 30.163] (--) NVIDIA(GPU-0):
[ 30.214] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 30.214] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 30.214] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 30.214] (--) NVIDIA(GPU-0):
[ 30.217] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 30.217] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 30.217] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 30.217] (--) NVIDIA(GPU-0):
[ 30.218] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 30.219] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 30.219] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 30.219] (--) NVIDIA(GPU-0):
[ 30.220] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 30.220] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 30.220] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 30.220] (--) NVIDIA(GPU-0):
[ 30.242] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 30.242] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 30.242] (--) NVIDIA(GPU-0):
[ 30.295] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 30.295] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 30.295] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 30.295] (--) NVIDIA(GPU-0):
[ 30.345] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 30.345] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 30.345] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 30.345] (--) NVIDIA(GPU-0):
[ 30.346] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 30.346] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 30.346] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 30.346] (--) NVIDIA(GPU-0):
[ 30.348] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 30.348] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 30.348] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 30.348] (--) NVIDIA(GPU-0):
[ 30.348] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 30.348] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 30.348] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 30.348] (--) NVIDIA(GPU-0):
[ 30.376] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 30.376] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 30.376] (--) NVIDIA(GPU-0):
[ 30.428] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 30.428] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 30.428] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 30.428] (--) NVIDIA(GPU-0):
[ 30.483] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 30.483] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 30.483] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 30.483] (--) NVIDIA(GPU-0):
[ 30.485] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 30.485] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 30.485] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 30.485] (--) NVIDIA(GPU-0):
[ 30.487] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 30.487] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 30.487] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 30.487] (--) NVIDIA(GPU-0):
[ 30.487] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 30.487] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 30.487] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 30.487] (--) NVIDIA(GPU-0):
[ 30.518] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 30.518] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 30.518] (--) NVIDIA(GPU-0):
[ 30.570] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 30.570] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 30.570] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 30.570] (--) NVIDIA(GPU-0):
[ 30.621] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 30.621] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 30.621] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 30.621] (--) NVIDIA(GPU-0):
[ 30.623] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 30.623] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 30.623] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 30.623] (--) NVIDIA(GPU-0):
[ 30.626] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 30.626] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 30.626] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 30.626] (--) NVIDIA(GPU-0):
[ 30.627] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 30.627] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 30.627] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 30.627] (--) NVIDIA(GPU-0):
[ 30.697] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 30.697] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 30.697] (--) NVIDIA(GPU-0):
[ 30.751] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 30.751] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 30.751] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 30.751] (--) NVIDIA(GPU-0):
[ 30.801] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 30.801] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 30.801] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 30.801] (--) NVIDIA(GPU-0):
[ 30.803] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 30.803] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 30.803] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 30.803] (--) NVIDIA(GPU-0):
[ 30.804] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 30.804] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 30.805] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 30.805] (--) NVIDIA(GPU-0):
[ 30.806] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 30.806] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 30.806] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 30.806] (--) NVIDIA(GPU-0):
[ 30.830] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 30.830] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 30.830] (--) NVIDIA(GPU-0):
[ 30.879] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 30.879] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 30.879] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 30.879] (--) NVIDIA(GPU-0):
[ 30.927] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 30.927] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 30.927] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 30.927] (--) NVIDIA(GPU-0):
[ 30.929] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 30.929] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 30.929] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 30.929] (--) NVIDIA(GPU-0):
[ 30.931] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 30.931] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 30.931] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 30.931] (--) NVIDIA(GPU-0):
[ 30.932] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 30.932] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 30.932] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 30.932] (--) NVIDIA(GPU-0):
[ 30.964] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 30.964] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 30.964] (--) NVIDIA(GPU-0):
[ 31.016] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 31.016] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 31.016] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 31.016] (--) NVIDIA(GPU-0):
[ 31.063] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 31.063] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 31.063] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 31.063] (--) NVIDIA(GPU-0):
[ 31.064] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 31.064] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 31.064] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 31.064] (--) NVIDIA(GPU-0):
[ 31.066] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 31.066] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 31.066] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 31.066] (--) NVIDIA(GPU-0):
[ 31.066] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 31.066] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 31.066] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 31.066] (--) NVIDIA(GPU-0):
[ 31.112] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 31.112] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 31.112] (--) NVIDIA(GPU-0):
[ 31.161] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 31.161] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 31.161] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 31.161] (--) NVIDIA(GPU-0):
[ 31.201] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 31.201] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 31.201] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 31.201] (--) NVIDIA(GPU-0):
[ 31.202] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 31.202] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 31.202] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 31.202] (--) NVIDIA(GPU-0):
[ 31.203] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 31.203] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 31.203] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 31.203] (--) NVIDIA(GPU-0):
[ 31.206] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 31.206] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 31.206] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 31.206] (--) NVIDIA(GPU-0):
[ 31.229] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 31.229] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 31.229] (--) NVIDIA(GPU-0):
[ 31.291] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 31.291] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 31.292] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 31.292] (--) NVIDIA(GPU-0):
[ 31.346] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 31.346] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 31.346] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 31.346] (--) NVIDIA(GPU-0):
[ 31.346] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 31.346] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 31.346] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 31.346] (--) NVIDIA(GPU-0):
[ 31.347] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 31.347] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 31.347] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 31.347] (--) NVIDIA(GPU-0):
[ 31.349] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 31.349] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 31.349] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 31.349] (--) NVIDIA(GPU-0):
[ 31.373] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 31.373] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 31.373] (--) NVIDIA(GPU-0):
[ 31.430] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 31.430] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 31.430] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 31.430] (--) NVIDIA(GPU-0):
[ 31.480] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 31.480] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 31.480] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 31.480] (--) NVIDIA(GPU-0):
[ 31.481] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 31.481] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 31.481] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 31.481] (--) NVIDIA(GPU-0):
[ 31.482] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 31.482] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 31.482] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 31.482] (--) NVIDIA(GPU-0):
[ 31.483] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 31.483] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 31.483] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 31.483] (--) NVIDIA(GPU-0):
[ 31.505] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 31.506] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 31.506] (--) NVIDIA(GPU-0):
[ 31.573] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 31.573] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 31.573] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 31.573] (--) NVIDIA(GPU-0):
[ 31.623] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 31.623] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 31.623] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 31.623] (--) NVIDIA(GPU-0):
[ 31.628] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 31.628] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 31.628] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 31.628] (--) NVIDIA(GPU-0):
[ 31.629] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 31.629] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 31.629] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 31.629] (--) NVIDIA(GPU-0):
[ 31.630] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 31.630] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 31.630] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 31.630] (--) NVIDIA(GPU-0):
[ 31.660] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 31.660] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 31.660] (--) NVIDIA(GPU-0):
[ 31.722] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): connected
[ 31.722] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): Internal TMDS
[ 31.722] (--) NVIDIA(GPU-0): LG Electronics W2361 (DFP-0): 330.0 MHz maximum pixel clock
[ 31.722] (--) NVIDIA(GPU-0):
[ 31.776] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): connected
[ 31.776] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): Internal TMDS
[ 31.776] (--) NVIDIA(GPU-0): BenQ GL2450H (DFP-1): 600.0 MHz maximum pixel clock
[ 31.776] (--) NVIDIA(GPU-0):
[ 31.777] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 31.777] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 31.777] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 31.777] (--) NVIDIA(GPU-0):
[ 31.783] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 31.783] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 31.783] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 31.783] (--) NVIDIA(GPU-0):
[ 31.783] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 31.783] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 31.783] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 31.783] (--) NVIDIA(GPU-0):
[ 31.809] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 31.809] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 31.809] (--) NVIDHi linderox,
Can you please give more details about what you are trying to do ?
KDE is one thing, Xorg an other thing and a terminal is also an other thing.
Changing language in KDE : do you mean the language of the KDE applications (English, French, Spanish ...)
Language in Xorg : what is this ? The only language I have ever configured in Xorg is my keyboard mapping.
Language in Terminal : what is this ? The LANG environnement variable ? the Local used to display characters (UTF8, us_US@UTF8, fr_FR@ISO8859-15 ...) ?
Than you for providing more info
Maybe you are looking for
-
I am based in the UK and have just got a new iphone 6, everything works well except when i try to turn on the itunes store app - i can do a search and buy music etc that way, within the app, however, if i go to Music, Movies or the TV shows section
-
Check if file exists in file receiver adapter
hello, we have following scenario -> proxy to file before appending to the file, it should be copied/renamed to a "tmp" file xi should then append to that tmp file and copy/rename the file back to the normal name I tried it with "Run operating
-
I can't get Itunes to load on my new Samsung Ultrabook?
HI, I have just bought a new Samsung Ultrabook, and was told ITunes would work on this computer. However, when I go to download it (I'm using Windows 7 and Internet Explorer 10 or Mozilla Firefox), the pop up window to download never appears - the we
-
Parent child relationship is not displaying for IDOC_OUTPUT_ORDERS (PO)
Hi, Can somebody help me the reason why parent child relationship not displaying properly for ORDER05 basic type? If we go in details about the problem, a purchase order is creating in R/3 through EBP. To modify my requirement I am using userexit EXI
-
How to count with two char and calculate KF as per the count
Hello All, I have a requirement where I need to display the data as per mentioned below chart. Region is on the row side, Vendor, Material and Value on column side. I need to show Number of Vendor belongs to Global,Regional and local, Similarl