Some error with audio device

When I start KDE apps in Gnome, I got this error:
How do I fix it?

Been there, done that. Wish they'd set the default to "deploy all"...Frustrating to use the wizard, and then have to go back in and manually edit everything to set it to "deploy all".
Scott

Similar Messages

Trouble with audio devices

I wrote a simple Java application to record audio on some mixer and then play it back. With my headphones / microphone connected, I got the following list of mixers:
1. Primary Sound Driver : Direct Audio Device: DirectSound Playback
2. Microsoft LifeChat LX-3000 : Direct Audio Device: DirectSound Playback
3. SoundMAX HD Audio : Direct Audio Device: DirectSound Playback
4. Primary Sound Capture Driver : Direct Audio Device: DirectSound Capture
5. Microsoft LifeChat LX-3000 : Direct Audio Device: DirectSound Capture
6. SoundMAX HD Audio : Direct Audio Device: DirectSound Capture
7. Java Sound Audio Engine : Software mixer and synthesizer
8. Port Microsoft LifeChat LX-3000 : Port Mixer
9. Port SoundMAX HD Audio : Port Mixer
Of these, mixers 2, 5 and 8 are not available when the headphones are detached, as expected.
Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
Is it not possible to record computer audiio when a microphone is connected? If it is, how?

Uncle_Sam wrote: I wrote a simple Java application to record audio ..
There is no simple way to record sound in Java, AFAIU.
Uncle_Sam wrote: ...on some mixer and then play it back. ...
Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
Is it not possible to record computer audio when a microphone is connected? If it is, how?
Significant question. Are you interested in getting this code to work for the machine you sit in front of, or is this for 'the general end user'?
I have no general solution for the latter, but for a single machine, installing an 'audio loop-back' (either software or hardware) might be the answer. That is the most intelligent thing I can offer that might help get around this problem.
(Note, also posted as ) [Trouble with audio devices|http://groups.google.com.au/group/comp.lang.java.programmer/browse_frm/thread/9983c6cd3e8204fd/e40278adaa2854cf] on usenet newsgroup comp.lang.java.programmer, and no, I personally do not consider that to be either a cross-post or multi-post (if anyone is interested in my opinion!).

ERROR The Audio Device supported by this application is not detected. the application will ex

Sound is fine but I get error message every time I try to start any of the creative applications that come in mediasource like the graphic eq, speaker settings, surround mixer, EAX and THX consoles; the error: The Audio Device supported by this application is not detected. The application will exit.
I have read the forum notes on this error message and seems other have had this same issue, but I don't see any solutions...if anyone knows anything about solving this little mystery, please reply - need to get into that console to fully utilize this sound card.

AFTER AUTOUPDATE this problem began. I removed the audigy package and reinstalled everything from the factory CD and still get this message. This happens every time I update the audigy drivers and thx. I am tired of doing recoveries to get audigy to work. Too bad I keep forgetting that the updates cause this problem. Audigy Platinum 2 works fine wothout the update. I will never update again!
How can I resolve this problem short of a full recovery?

I have some error with my iphone 5 in black screen nothing shown

i have some error with my iphone 5 in black screen nothing shown nothing do no restart and when i have restore my iphone it say error 4014????????????

is this the original iPhone 5, or 5s? If it's the 5s do you have Apple Care still? If so calling Apple iPhone support is where to start, hopefully they can help, if not, setting up an appointment at the Genius Bar at an apple retail store is a good option too, Call the store first though and ask what your options are in terms of warranty and service. If you are having problems with the regular iPhone 5, still call Apple Care or an Apple store and see what they can do.
good luck!
K?

Is there errors with apple devices lately?

My iPad Wifi and iPhone 4 don't seem to send the notifications and emails through right away. It's weird. It did it home, it did it on vacation this weekend. Is Apple experiencing errors with their devices? If so, they should release iOS5 soon 'cause it would update their devices

Copied from the iPad User Guide for iOS 4.3 book that is available in iBooks as a free download. I highlighted and made the type bold and red that I think is pertinent to your question. The notification delay could be on the server end as well I would imagine.
Fetch New Data
This setting lets you turn Push on or off for MobileMe, Microsoft Exchange, Yahoo! Mail, and any other push accounts on iPad. Push accounts automatically deliver new information to iPad when new information appears on the server (delays may occur). To fetch or sync pushed data, iPad must have an Internet connection. Turn Push off to suspend delivery of email and other information, or to conserve battery life.
When Push is off, and with accounts that don’t support push, iPad can still check the server to see if new information is available. Use the Fetch New Data setting to determine how often data is requested. For optimal battery life, don’t fetch too frequently.

Error with Loading Device Software on 8700 AT&T phone.

Hi. I would like some help with my 8700 AT&T refurb blackberry phone. When I tried to download the device software (v4.5) to my already downloaded DTM (v4.6), it gave me an error message I did not know what to do with.
I want to synch my organizer data (calendar, contacts) from older desktop (Outlook 2002) to my new laptop (Outlook 2007, Windows 7). I am having trouble downloading the supporting device software. I keep getting an error message that reads "Error with the Application Loader. Cannot update software using this system as device is currently activated on a blackberry Enterprise Server or professional software. Contact administrator or check with service provider." I do not use Enterprise. I don't have an internet service plan for my phone as I use it only for calendar and contacts. AT&T gives the software option for AT&T 8700 in English device software as v4.1.0.175 as the only option that is supported by my current platform (2.0.0.90). Is this right?
All I really want to update my phone with the latest software that supports Outlook 2007 on my new laptop. What do I need to make that happen?
Thanks in advance.

Hi there!
Refurbs can be problematic. If a BB was ever activated on BES, then it has an IT Policy. IT Policies are not removed by the standard WIPE actions. Rather, they take additional steps to clean off the Policy.
Just to check, please go to this screen:
Homescreen > Options > Security Options > (Information) or (General Settings) or (something similar)
On that screen will be some selection boxes plus other sections (divided by horizontal lines). If, on that screen, there is any discussion about IT Policy (even if it says "Default"), then you indeed have an IT Policy on your BB. (The screen may also have a section for "Services").
If you don't have an IT Policy, then something else is going on...in which case, stop here and report back exactly what you found on that screen.
If you do have an IT Policy, then, in my view, you have two choices.
1) Since this refurb was provided to you by ATT, they did not deliver to you a "clean" device. You could take it back to them and have them clean the IT Policy off.
2) You can remove the Policy yourself. The process is 100% destructive to the data on the BB, so you'll want to be sure you've already taken a good full backup. Then use Method 3 in this KB.
As for what device OS to install, you have more choices than you indicated. See this page:
https://www.blackberry.com/Downloads/browseSoftware.do;jsessionid=0A15EC28AEC181D3F3F9C5235D9F166A.n...
Select, from the drop-down, your model (8700). The resulting screen shows that ATT is currently supporting 4.5.0.182 (MultiLanguage) for your BB model. The MultiLanguage pack will include English, so you don't have to fall all the way back to the English only version. So, you have choices. The best advice is to use the most recent version -- bug fixes, enhancements, and all of that.
What I advise, since you want to use Outlook 2007, is to use that 4.5.0.182 package for your BB and the most recent RIM desktop package (5.0.1.28). That way, you will have full compatibility for what you are looking for.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error: The Audio Device app not detected please h

Hi,
I seem to be having a problem with my audio device. I purchased a Dell Dimension XP and wanted to use the Creative Labs interface that came with the card I had purchased for my old computer. I put the Sound Blaster Audigy ZS Platinum in the new computer, installed the drivers and software but I can't seem to access some of the features on my surround mixer. For Example, I can't access Graphics Equalizer, EAX console and THX Console Setup.
I'm running Windows Media Center 2002.
Any solutions to this, I'm trying to record vocals but without the access of these features it's pointless to even use this card anymore.

Anyone?

Iphone 4 randomly came up with a grey screen showing 'ios6' and then said 'connect to iTunes'. However iTunes won't pick the device up and states there is an error with the device?

My iPhone was working fine yesterday and then showed a grey screen with the message 'ios6'. When I tried to use the phone it came up with the error message 'connect to iTunes'. When I got home from work I did this, at first iTunes could not detect the device and then it suggested a system restore. Once the restore had completed I selected the language, country/region and then came back to the same error message 'connect to iTunes'. When I tried to connect the device iTunes could not detect it and stated that there was a problem with the device.
I have telephoned my network provider to request a replacement device on my insurance but they have said they cannot authorise until I have had the fault diagnosed my Apple. Only problem is there are no genius appointments free until Friday!
Any help would be massively appreciated!

We're not Apple. Se can not magically make a genius appointment available for you.

Some error with owbr2 deploy a cube

When I try to deploy a cube with rolap using "Deploy to catalog only"
some error view
ORA-06510: PL/SQL: exception defined by user not handled
ORA-06512: in "OLAPSYS.CWM2_OLAP_UTILITY", line 1660
ORA-01403: no data found
ORA-06512: in "OLAPSYS.CWM2_OLAP_CUBE", line 33
ORA-06512: in "OLAPSYS.CWM2_OLAP_CUBE", line 55
ORA-06512: in "OLAPSYS.CWM2_OLAP_CUBE", line 386
ORA-06512: in line 7
but If I use "Deploy Data Objects only" it deploy's successfully.
Anyone know what is the problem,how can i correct it
Thanks

Been there, done that. Wish they'd set the default to "deploy all"...Frustrating to use the wizard, and then have to go back in and manually edit everything to set it to "deploy all".
Scott

Some errors with the code

hello all!
i am trying to write simple code but have some errors.
DECLARE
id NUMBER;
BEGIN
id:=SELECT id from technician where salary=(select MIN(salary) from technician);
DBMS_OUTPUT.put_line(id);
END;

Your simple program becomes complex! As pointed out, it will blow up if your query returns more than one row. If you're just doodling with your code, you can add "and rownum=1" to your where clause. That will prevent the "too many rows returned" exception. Of course, it is basically randomly picking one of several values in the DB, so it's not good for production code.
For real code, there are at least two common options:
(1) Use your select to create a cursor, which lets you loop through each matching row. Good when multiple rows are normal and you really want to use them all.
(2) Create an integer variable, such as row_count. Select count(*) into row_count ... from technician t where salary....
If row_count = 1 then use the assignment you were going to do. Otherwise, stop processing and log an error (too many or too few rows returned...).
This is good when you expect EXACTLY one technician to have that salary, and anything else is an error.
Andy

SOMEONE PLEASE HELP! I am desperate..."error with audio configuration"

I have had a flurry of problems that are related in another link, about drives.
I had to complete restore my library and import back each of my songs individually, which was successful. I also needed to install the new iTunes 7.7
However, when I launched iTunes only about a minute later, a message popped up saying that "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." And now, NONE of my songs or videos will play.
PLEASE HELP! I've spent the past 2 days trying to fix a lot of things, and all of them seemed solved until this problem. I'm leaving in 7 HOURS! So please, help is appreciated.

Go into your Control panel, and launch the "Sounds and Audio Devices" control panel. Click on the "Audio" tab.
Is the correct default device showing up in the "Sound Playback" area?

Hard problem with audio device installing for Lenovo G430 t6600

Dear all,
as I read about this problem from many messages in this forum, I have the same problem when install audio device for Lenovo G430. I want to write this message and hope that someone can help and show me the detail way to fix this problem and this is also to help others customers of Lenovo.
Sure that I did all the ways that messages in this forum showed to fix:
First, I downloaded hotfix - patch and Conexant Smart audio drive files which suitable with my model-type of laptop (G430, use win XP SP2), these files I downloaded from Lenovo website.
Then I uninstall all audio devices from my Laptop
install Hotfix first, and then, I install Conexant Smart audio
But, in the end I received the message: could not find the media device...blap blap and of course, my laptop keep...have no any sound
If Lenovo G430 support for Win Vistra, why my Laptop had a normal situation (all drives were installed, and the sound was good) when I bought it and the laptop run Win XP SP2. I had this problem when I re-install sound drive from the drive disk the supplier deliver to me, after this, my laptop have no sound any more!!.
So, please, if someone (and maybe the supporter-computer technician from Lenovo) can help me and other customers(who have this problem) to solve and fix with a detail way, we will say many thanks. This problem made me feel Lenovo is a hard laptop to use.
please contact to me through email: [email protected] Thank you very much

P.S.: The firewire hub was labeled to be OS X compatible ... Is there any specific data available a firewire hub should meet so that there are absolutely no problems in OS X 10.4?
THX!

Help with Audio Device Playback

Hoping someone out there can help. Before I updated to iTunes 7, I played back all of my iTunes music through some studio monitors connected to a Digidesign Mbox audio interface. Since upgrading, I cannot get clean audio using this device. When I select "Digidesign Mbox: Chan 1-2" as the default sound playback device in my QuckTime preferences, playing a song in iTunes gives me a garbled sound--almost sounds like a CD that's skipping. Can anybody help with a solution? I hate having to listen to my tunes through two tiny cheap computer speakers!
Thanks in advance,
Mike

I have the same problem. I get the garbled "Skipping" sound when I use the new version of iTunes. The only way I have to get around it is an old version of iTunes 6 I have saved - it has the same version of Quick Time Attached that was good (then) and should work with the WaveDriver. I have an MBOX 2 and it sounds GREAT.
It really is bad that Apple has this "New, Great" iTunes but it won't work with the existing hardware. I can go from my Sound Card out to my Monitors, but the sound quality is bad. And it is so much easier to just use the MBOX volume adjuster - it is very handy.
Apple, please fix this problem. I want to download DRM free music but iTunes 7.2 does not work with MBOX 2.
AlienWare Area 51 Windows XP 4gb RAM, nVidia 6200TC, SoundBlaster Audigy, MBOX 2

Some Error with Some packages on Unbreakable oracle Enteprice linux 5.2

Dear all,
when I Install Oracle EnterPrise Manager 10gR2 on Unbreakable oracle Enteprice linux 5.2 it requried fro me some packags which are nessaray for installer like the following packages
Checking operating system package requirements ...
Checking for compat-libstdc++-296-2.96-132.7.2; found Not found.     Failed <<<<
Checking for libstdc++devel-3.4.3-22.1; found Not found.     Failed <<<<
Checking for openmotif-21-2.1.30-11; found Not found.     Failed <<<<
Checking for pdksh-5.2.14-30; found Not found.     Failed <<<<
Checking for gnome-libs-1.4.1.2.90-44.1; found Not found.     Failed <<<<
Checking for xscreensaver-4.18-5.rhel4.2; found Not found.     Failed <<<<but when I install thes packages ,the fllowing message is shown
oracle@alwosaby ~]$ rpm- ivh pdksh-5.2.14-30.3.x86_64.rpm
warning: pdksh-5.2.14-30.3.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 0c98ff9d
error: Failed dependencies:
pdksh conflicts with ksh-20060214-1.7.x86_64
*[root@test Desktop]# xscreensaver-4.18-5.rhel4.14.x86_64.rpm*
bash: xscreensaver-4.18-5.rhel4.14.x86_64.rpm: command not found
*[root@test Desktop]# rpm -ivh xscreensaver-4.18-5.rhel4.14.x86_64.rpm*
warning: xscreensaver-4.18-5.rhel4.14.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1d1e034b
error: Failed dependencies:
xloadimage is needed by xscreensaver-4.18-5.rhel4.14.x86_64
*[root@test Desktop]# rpm --import /usr/share/rhn/BETA-RPM-GPG-KEY*
*[root@test Desktop]# rpm -ivh xscreensaver-4.18-5.rhel4.14.x86_64.rpm*
warning: xscreensaver-4.18-5.rhel4.14.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1d1e034b
error: Failed dependencies:
xloadimage is needed b
oracle@alwosaby ~]$ uname -a
Linux alwosaby 2.6.18-92.el5 #1 SMP Fri May 23 23:40:43 EDT 2008 x86_64 x86_64 x86_6 4 GNU/Linux
Please how i install these packages ?
If any one have exprecie about this problem , Can Help me?
Regards
alwosaby
Edited by: user2985354 on 28/01/2009 09:01 م

You are mixing redhat provided packages with OEL. Generally, it's not a good idea to mix packages of different distributions.
The media you've used to install OEL contains these packages. Use these.

CUA: SCUG - Transfer Users errors with Output Device does not exist

Greetings,
I'm currently setting up CUA on our ECC 6.0 boxes and ran into an issue when I run SCUG and try to transfer the users. We're in the process of upgrading to ECC. The target systems are upgraded copies of our current 4.7 target systems.
Currently we have CUA connecting to our DEV,TEST, PreProd, and Prod Systems.
The output devices only reside on the target systems. There are no output devices on our production CUA box.
I'm trying to setup the ECC CUA box and modeling all the settings to our current environment. Once I set the CUA setting, including the RFC's and ALE connections I ran scug and ran into the issue.
I only get the error where the Default Output Device is populated. Users with no Default Output transferred without any issues. I looked up notes in OSS and can't seem to find any on this subject.
Side note: If I remove the output device it transfers without error. Obviously this is not a solutions, I was merely testing out the scenario.
Any help would be greatly appreciated

Hi Alex,
there is just a little comment in SAP note #399917 (point 4).
As from my knowledge, the SCUM settings are not considered during SCUG. So setting
'output device' to local will not be a solution.
The standard way is to transport the ouput device information to your CUA-master system before taking over the users. (create transport in SPAD).
I have also another workaround for you gurus, but this will need to modify the standard coding for the time of taking over your users. Using this modification, only a warning message will appear and unknown printers will not be taken into CUA-master system.
Pls test this proposal carefully (coding is rather old....), this is just a suggestion !
Include LSUUCF01
FORM DEFAULTS_CHECK
Spool: Ausgabegerät
IF NOT DEFAULTSX-SPLD IS INITIAL AND
     NOT USER_DEFAULTS-SPLD IS INITIAL.
    SELECT SINGLE * FROM TSP03 WHERE PADEST = USER_DEFAULTS-SPLD.
    IF SY-SUBRC <> 0.
      PAR1 = USER_DEFAULTS-SPLD.
      CALL FUNCTION 'BALW_BAPIRETURN_GET2'
           EXPORTING
                TYPE       = 'W' "'E' "Warning instead of error
CL         = '01'
                NUMBER     = 29
                PAR1       = PAR1
          IMPORTING
               RETURN = ERRORTABLE
           EXCEPTIONS
                OTHERS     = 1.
APPEND ERRORTABLE.
    ENDIF.
ENDIF.
I strongly recommend to undo this modification after you have finished SCUG.
Good luck, b.rgds, Bernhard

Some error with audio device

Similar Messages

Maybe you are looking for