Some infoproviders not appearing in query design

Hi experts,
when i try to create some query on infoproviders that are in BW, I cant find the same in query design.. Am i missing something...??
Thnaks
Dave

Hi Dave,
If your Info-providers does not have any associated query with it then you would not find it. You need to click the create button and you should be able to see all the info-providers.
In case your are unable to find an ODS then make sure the "Bex Reporting" checkbox is checked in the ODS settings checked.
Bye
Dinesh

Similar Messages

Infoarea not appearing in Query designer

Hi - I have some cubes created under cross application components infoarea but the infoarea is not appearing in the query designer. I have to create reports on these. how can I see them in query designer?
Thanks,
Raj.

Hello,
Please check your role. You do not have the authorization for that infoarea.
Hope it helps,
Regards,
Meric

Moving keyfgures to some other place in the query designer

Hi
I have lot of Keyfigures in the Query Designer (Columns). How can i move some other place in the query designer.
Like We can move some of characteristics to "Free Charactersitic" area . Like that how can i move some of keyfigures to some other area.
pls let me know
kumar

You can have all KeyFigures together either in columns or Rows(in a structure)..not possible to seperate them...or place them in Free chars or Filters...and not possible to group Chars and Kfs in the same structure.

Mapped characteristics in Multiprovider not available in Query Designer

Hi,
we have a multiprovider with approx 10 cubes and lot of characteristics, Navigational attributes mapped to it. I have added around 3 more characteristics and mapped to underlying cubes. But these added characteristics are not visible in Query designer. Is there maximum limit for the number of characteristics.
Thanks,

Disconnecting the BEx made it work. But i dont understand i added this yesterday in the multiprovider. But i also removed some navigational attributes from the mapping. I will re-map and check. Thanks for the tip.

Hierarchy node not available in Query Designer

Hello Gurus,
I can find the hierarchy node variable in BW but it is not available in query designer. Does anyone know what might be the problem and a solution?
Thanks,
Mark

Hi Mark,
You said you "find the hierarchy node variable in BW but it is not available in query designer".
How did you find the hierarchy node variable in BW? From backend SAPGUI, you will only be able to see the variable in some internal tables like RSZGLOBV. Did you mean this?
For "it is not available in query designer", do you means that when you want to create a hierarchy node variable for this characteristic in Query Designer, you don't find this certain hierarchy node variable in the hierarchy node variable list?
Important thing to notice is that, flat value variables and hierarchy node variables are listed separately. Did you make sure that you have chose to list hierarchy node variables in Query Designer?
Regards,
Patricia

Infoobject in infoset but not displaying in query designer

Hi,
I have created a query on infoset(ods1 & ods2).
a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
pls give your inputs,for why this infoobject is not available in query designer.
Thanks
Radika

Hi Radika,
I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
Do this and see if it helps.
Thanks & regards,
Nikhil

G/L Description not showing in Query designer for Characteristic values

Hi Friends,
We have developed a report and that we have made two New selections on the object 0GL_account....some GL Account number are grouped in that. While selecting the GL Accounts to new selection, it is showing GL Account number and Description. After that, the selected objects are not showing the Description in the query designer. It is showing GL Account number only for the both Technical name and Description. I Would like to see Description of the GL Accounts in the Query designer. i have plan to delete certain account based on their dercription.
And at the Infoobject description in the Business Explorer tab Display feild it is set as Text and Key. And till yesteday it shown the Description for the Account numbers. The daa loads are also .gone fine.
Can you please guide me in this regards
Thanks & Regards
Anand

Hi Thanks for your reply.
The accounts which we selected are having Description and it is showing while selection the selected GL Accounts.
And the master data also is in active...When i try to activate the master data Agoin it is saying statement "Master data for characteristic 0GL_ACCOUNTactive"
Any more suggetions..........
Regards,
Anand

Attribute not visible in Query Designer

hi BI Gurus,
I could not see some InfoObjects(Attributes) which are marked Authorization Relevant, in the query designer. And the strange thing is, they are not visible even for the user with SAP_ALL and 0BI_ALL assigned. The authorizations for the cube in which the main char is used looks fine.
I have checked all the options in RSECADMIN, everything looks good.
pls help me in finding the solution..
thanks
Cnu..

check out with the info object screen in attribute tab, navigational attribute on/0f switch box, if u r using FF source system.
check out with the infocube whether u r checked the check boxes in navigational attribute tab.
regards
harikrishna.N

IP - Aggregation Level not showing in Query Designer as infoprovider

Hi guys
I just started implementing Integragted Planning at a new client. I created an aggregation level to build my input ready query. However this aggregation level is not available as an inprovider in the Query Designer nor is it available under the infocube in RSA1 on which the aggregation has been defined.
Any suggestions?
Thanks for your help.
Ameya Kulkarni

Hi Mayank
Good point. But I could not see the aggregation level whatsoever in RSA1. The aggregation level is consistent and activated but does not show in the query designer.
I was wondering if there is some configuration that I have to do to get the aggregation level available in the query desginer.
Please let me know.
Thanks,
Ameya Kulkarni

Filter does not appears in query

Hi experts.
I have define several InfoObjects, i.e.
1) Fiscal Year/Period
2) Fiscal Year Variant
3) Company Code
as my Filter in the Query Designer. These InfoObjects are tagged with selection variables and user can choose any value they want during query runtime.
However, upon executing the query, one of the Filter, i.e. Fiscal Year/Period does not appear in my query. Other InfoObjects are displayed. My users want to see the value of Fiscal Year/Period in the query so I need to show it there.
May I know what is the reason for this and how can I solve this problem?
Thanks a lot for your help!

Hi.
Yup. Creating a workbook would definitely solve the problem but I want to nail it at the query.
I finally found the answer.What I did was to select "Ready for Input" option in the variable definition. It works and my filter gets displayed there.
Thanks guys!

New key figures in multiprovider not visible in query designer

Dear Experts,
I added a cube and keyfigures to the multiprovider definition.
The multiprovider is activated successfully.
The added keyfigures come only from this new cube.
I identified these new keyfigures to this new cube only.
There is an existing query based on old version of the multiprovider without the new cube.
When i relaunch query designer and re-open this query, i could not see the new keyfigures.
When i create a new query, also its not showing the new keyfigures.
Is there something not refreshed that I do not see these new key figures?
Kindly advise. Thank you!
Best regards
Bass

Hi,
Some time it happens that newly added key figures and characteristics are not visible immediately in Bex query designer. Just check for warnings if any encountered while activating else try editing and re activating your Multiprovider and also proper field assignment.
Newly added Key Figures should be visible in both New and Old queries without any differentiation. Just log off and log in back after some time, there is a good possibility that this inconsistency would be resolved.
Regards
Raj Rai

Some hyperlinks not appearing in generated Word doc

When I generate a Word document, some of the hyperlinks show up, but not all.
I looked at Peter Grainge's site under Printed Documentation and issues, but didn't find anything that matched my problem. I also looked here on the forum, but didn't find anything.
I have a feeling it's a problem with style mapping because the links that aren't showing up are those that appear in lists (both ol and ul).
In other words, if I put a link in a paragraph that's a regular <p></p> paragraph, it appears in the Word doc and the link itself works.
If I put it in a <li></li> paragraph, the link does not carry over; there is no blue underlining and if you mouse over what should be a hyperlink, the cursor does not change to a hand icon.
Can anyone provide any suggestions?
I'm using RoboHelp 9 and Word 2010.

RoboHelp 10. I recently had a similar problem with hyperlinks not appearing in the PrintedDoc output, despite the following settings:
Conditional Build Expression = None
TOC = Default Table Of Contents, which contains all the topics that I want to appear in the output, but does not include every topic in the HTML Files (Topics) folder.
Retain hyperlinks
By comparing hyperlinks in a number of topics with the Word page, I found that hyperlinks in the Word document are not active when the target topic is in the root folder, but is not included in the TOC.
In the Print Document Content dialog box, I typically select TOC>Show all topics and click the double right-pointing arrows so that all the topics in the default TOC are in the right pane.
When I realized that hyperlinks to root topics were not active, I added the topics to the document content. To do this, I selected Top Level Folder and then selected each topic whose Help icon is white (i.e. not in the TOC) and clicked the right-pointing arrow to move it to the Content pane.
However, to make me happy on a Friday afternoon: "Internal error encountered. Failed to generate Printed Documentation".
I tried generating again, and now RH appears to be stuck on "Updating images". This happened the other day, too, and I waited 10 minutes before understanding that RH would stay stuck forever and would never even crash .
Here's what I think will resolve this particular issue. I'll put the renegade topics in the Default TOC so that hyperlinks to them will be active. This is not a problem for my end users because I don't generate their output from the Default TOC -- my project has five other TOCs that are used to generate WebHelp Pro. I only use the Default TOC to:
Edit topics in any module without having to open each individual TOC
Generate a "Test ALL" SSL that contains everything, so that I can search more easily across modules
Generate PrintedDoc for reviewers
Hope this information is useful to anyone who encounters this type of problem.
Carol

Some Services not appearing in ESS.

Hi All,
I have configured ESS and it was working fine previously.
But now Some Services on overview page of ESS are missing after 105 mapping.
This issue is for all the users.
But if i remove 105 mapping all the service link appearing on overview page.
services not appearing after 105 mapping : Form 16, tax declaration , IT declaration , work Event AreaPage.
System version is EHP7.
Kindly suggest.
Thanks & Regards,
Meghal Shah.

Hi CRANGV,
we are not using any UI5 Application so ODATA is not required.
we have configured LPD_CUST properly.
If Employee not maintain in 105 than all the services are appearing.
but if we map user under 105 infotype than some services is not appearing .
Thanks & Regards,
Meghal Shah.

Some images do, some do not appear in Preview or Publish

Greetings,
I imported a FrameMaker file, which generated its own folder
and the file with all of its screenshots are in that folder. Within
RoboHelp (7, FlashHelp) all images appear as expected. When
compiled for Preview or for Publshing, however, some images do
appear while others with the same path do not appear.
What is going on?
Am I missing something?

Yes I do and that is another problem I will check the box for each item I do want to show up
in the menu bar when I check the box it will stay checked until just when I'm starting to close the
box? This really weird as I said in my 1st post I have to go to the System Library>CoreServices
then the folder Menu Extra's I'm just about at the point of reinstalling my OS unless someone
can tell me why this is happening
Thanks for the post
Michael

Grid Lines not appearing in Query

Hi all,
I have a query in BI 7.0. The problem is the Grid lines & the Formats are not appearing in the query i.e the row & column lines are not appearing. These were there before 2 weeks but now something has happened and it got changed. So, if i create a workbook from this query, the workbook also reflect the same format. Even if i make the format changes through excel functions, i could only save it as a workbook and it wont reflect in the query.
We are not able to identify exactly why this problem came. It doesnt have anything to do with the Package or patch. This problem occurs only for one query & all the other query formats are working fine. I compared the error free queries with the problem query but everything seems to be the same.
Please help me in solving this problem.
Thanks,
Murali

Hi Everyone,
The issue is solved. The option "Adjust Formatting after Refreshing" in the Query Properties was unchecked. I checked that & the problem is solved.
Thanks,
Murali

Some infoproviders not appearing in query design

Similar Messages

Maybe you are looking for