Somebody help me!!! N80 troubles with firmware v 4...

Seem to have an issue with 4.0632.0.38 firmware.
Ever since i upgraded to it my phone refuses to dial any numbers in my contacts or log. If i manually type a number it works fine but calling contacts or a number from a text message does not work.
When i push the call button it does nothing as if i've never pressed the button.
It has to either be a firmware related problem or something is wrong with the actual chipset in the phone. Seems wierd how it's been working for almost a year fine and now this firmware version gets installed it buggers up.
More info on this problem can be seen in my other post in troubleshooting.
Does anyone have any idea of this problem??Message Edited by juzz18 on 02-Aug-200706:10 AM

i still believe the software on mine has got to be the problem because nokia have replaced my phone with another N80 and it still does the same thing!!!
i'm trying to tell them to look into it with software developers etc.. but im getting nowhere.
This is a joke.

Similar Messages

  • Help please.  Trouble with a table

    Hi All.  Hope you can help.  Looked through the Q & A but it's all about CS4 so no good to me as I have CS3.  I am new to DW and trying to start my site.  I inserted a table with 1 x row and 2 x columns.  I first made the left column 160 px wide, and the rest for the main body.  Inserted a graphic at the top of the left column to head the menu.  Then I tried to insert another graphic into the body (right column)  I could not place this graphic at the top because the cursor would only go half way down the image on the left.  I tried doing various things and one image would go up and the other down or vice versa.  It's driving me nuts :-))  Does anyone have any idea what I am doing wrong please?
    Also, does anyone know of a site where I can get good tutorials in CS3 please/, without it costing me a small fortune.  TIA
    Regards
    Jon

    With your cursor in the table cell, set the verical alignment to Top in the properties panel.  That will ensure that any images or text you place within that cell stays at the top no matter how the cell or table expands.
    And not to be disrespectul in any way, this is a pretty basic function of table layouts.  You are sure to run into many more troubles along the way unless you study up on tables and how they work in DW.  So instead, I agree with the above response - you're going into a learning curve anyway, so you may as well apply it to CSS - I think things will even go quicker for you that way and you'll be building sites using the current and better technology.

  • HELP ME PLEASE - TROUBLES WITH BB APP WORLD AND CANNOT INSTALL APPLICATIO​NS

    Hi there,
    can anyone help me... I've been trying all day to try and download apps from my desktop to my BB Curve 8520. i was trying to download dexrex... so i select to download it, i get redirected to a page that asks me for my email and PW, I provide the info and am redirected to another page "blackberry app world setup" 
    step 1 states "You have installed the BlackBerry App World Browser Plug-in on this computer."
    Step 2 asks for me to connect my smartphone and select my device. I select the only PIN available that comes up. I am prompted for a Password and provide it.
    Step 3 states the following... "you have a version of blackberry app world that enables account creation"
    I click onto Next on the bottom left - and terms and conditions come up, i select "i agree"
    then this comes up from paypal....
    "Our records indicate that you have already paid for items in App World with a PayPal account. To transfer your paid items to your My World account and connect your PayPal account to your My World account, please click the button below to be taken to the PayPal site to validate your credentials."
    the only thing to click on really is the paypal ... and i get redirected to the blackberry ID sign in page and repeat all the same steps as above.
    Please help me!!!

    I've gone through the exact same process as you. Frustrating!!
    It's infuriating to get an error message that says "Blackberry App World cannot be downloaded from Blackberry App World."
    And it's downright SCARY to get the following message when you've NEVER used PayPal in your life:
    "Our records indicate that you have already paid for items in App World with a PayPal account. To transfer your paid items to your My World account and connect your PayPal account to your My World account, please click the button below to be taken to the PayPal site to validate your credentials."
    These are problems that just shouldn't be happening. Don't tell me I have a PayPal account when I do not.
    At this point I don't see a way to proceed without creating a PayPal account... is it the case that Blackberry App World is unusable without a PayPal Account?
    If there is a way to proceed without a PayPal account I would love to know what that is.
    If there is not, then why don't you just say, "You must create a PayPal Account to use BlackBerry App World"?
    Let me know which it is. Thanks.

  • Please help!  Having trouble with downloads!

    Whenever I try to download windows programs, microsoft excel tries to open the program... I'm trying to download Media Player, but after the download is complete and I click open, Excel tries to open it (which obviously doesn't work). How can I fix this problem?

    Do you have Windows installed or are you trying to download and install Windows Apps thru OS X?
    If it's the latter,it won't work.
    Please be more specific with your problem and we may be able to help you further.
    Jim
    PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM   Mac OS X (10.4.8)  

  • PLEASE HELP i have trouble with WRT54G port forwarding with linksys

    Hello guys, i play a game called populous, and since im on a router i cannot host the game, when i used to have a d-link all i would do is have to set up the port to my ip with the udp. but ever since i have swiched to linksys that doesnt work, the ip on my portforwaring is the same as the one on my computer the port is correct and the udp is set, i also have no fire walls on and it still doesnt make a differance, Someone in the game suggested that there is a local ip i need to get? is that true or is there another setting i need to set up in my router page?
    PLEASE HELP IF YOU CAN <3<3 thanks
    Message Edited by Curtman on 09-07-2007 12:04 PM

    Yes that happens if you write replies to your own posts. Many regulars here only answer their "own" topics (i.e. to which they have answered before) and new ones which don't have replies, yet. If you write a reply to your own topic chances are your are not read unless during some random browsing...
    Regarding your problem it is impossible to say anything unless you give the exact settings you have on your router. Please post the full settings you have for port forwardings, port triggering and DMZ. If you have UPnP forwarding in your router (I don't think you have) post those settings, too.
    Otherwise I suggest this checklist for troubleshooting port forwardings.

  • Re: Help! Having trouble with what should be a simple v. (0/1)

    Thanks to you and everyone who showed interest.
    These are the files, I put them in both version 5.0 and 5.1 format.
    Sub1 is an attempt to make a sub VI that would be part of a larger
    prog. It works by itself but not when part of the bigger picture.
    The bigger picture is really just 5 possible copies of the sub.
    What should happen is when the operator enters a number into "Input
    Tray Number" and hits enter, the timer starts counting up to 45
    minutes. If it reaches 45 min an alarm goes off. If the "Tray in
    Oven" switch is hit before the alarm state, the timer stops and
    everything is reset to default.
    Again, it works fine in sub1.vi. The problem comes when trying to use
    5 seperate instances
    of that sub in Tray Timer.vi. The timers need to
    operate completely independantly of each other.
    I'm SURE it's a boneheaded mistake I'm making somewhere. I just can't
    see where.
    Thanks for any help provided.
    Steve Crowder
    [email protected]

    Regretfully, and with all due respect, your problems are manifold. The
    While Loop construct you used does not truly monitor for the user entering
    "Input Tray Number" and then start your countdown clock. The countdown
    clock will run only if the appropriate "Tray in Oven" Boolean control is set
    to false.
    If you started Tray Timer.vi using the Run Continuously button, you have the
    VI starting, seeing all of the "Tray in Oven" controls set to true, stopping
    itself, then starting itself again until it sees one of the "Tray in Oven"
    controls set to false. At this point the appropriate While Loop will run
    until the control is reset to true. The other While Loops will have
    finished running long ago because their "Tray in Oven" controls are set to
    true.
    The simplest solution is to enclose each of your While Loops in yet another
    While Loop, the continuation indicators of which are wired within the While
    Loop to either some overall Boolean control or its local or global;
    enclosing all of your While Loops in a single While Loop will have the same
    results as using the Run Continuously button.
    Remember that the Run Continuously button should be used only for debugging
    purposes. When it is time to run your final application, the Run button
    should be used to start it.
    Code well, and prosper!
    Douglas A. Femec, Software Engineer, Viewpoint Software Solutions, Inc.
    2320 Brighton-Henrietta Townline Road, Rochester, NY 14623
    (716) 475-9559, ext. 18 (voice); (716) 475-9645 (fax)
    [email protected]; www.ViewpointUSA.com
    Steve_C wrote in message
    news:[email protected]...
    > Thanks to you and everyone who showed interest.
    >
    > These are the files, I put them in both version 5.0 and 5.1 format.
    >
    > Sub1 is an attempt to make a sub VI that would be part of a larger
    > prog. It works by itself but not when part of the bigger picture.
    > The bigger picture is really just 5 possible copies of the sub.
    >
    > What should happen is when the operator enters a number into "Input
    > Tray Number" and hits enter, the timer starts counting up to 45
    > minutes. If it reaches 45 min an alarm goes off. If the "Tray in
    > Oven" switch is hit before the alarm state, the timer stops and
    > everything is reset to default.
    >
    > Again, it works fine in sub1.vi. The problem comes when trying to use
    > 5 seperate instances of that sub in Tray Timer.vi. The timers need to
    > operate completely independantly of each other.
    >
    > I'm SURE it's a boneheaded mistake I'm making somewhere. I just can't
    > see where.
    >
    > Thanks for any help provided.
    >
    > Steve Crowder
    > [email protected]

  • HI THERE!IS THERE ANY ONE WHO CAN HELP ME HAVING TROUBLE WITH MY IPHONE 3GS AFTER UPGRADING TO IOS5.0 IT WONT READ THE SIM AND NO SERVICE  AND IT WONT ACTIVATED.PLEASE HELP

    HI THERE IS THERE ANYONE WHO CAN HELP ME?I UPGRADE MY IPHONE 3GS TO IOS5 AND NOW IT WONT ACTIVATE AND SAYS THE SIM CARD IS NOT SUPPORTED I CHANGE FOR ANEW SIM ALREADY BUT STILL WONT ACTIVATE.PLEASE HELP

    you're responding to a post that's almost 2 months old. Time to post your own thread.

  • Help! Having trouble with camera app after update to iOS 5.1.1

    I'm having a big problem with my Itouch. I've never jailbroken it or any of that crap. Here's the deal. I just updated to 5.1.1 and I tried to record a video but whenever I press the record button it starts recording but can't press it again to make stop. So, press the menu button then I tried going back to the camera app then I hit record now this time it just freezes!!!!!  

    My IPhone 5 camera is locked after the new update!

  • Help!! Trouble with .mac

    Hey guys,
    I looked around the .mac group and couldn't find the answer i needed. I'm trying to sync my address book with .mac but it keeps telling me that the computer I"m using is already registered....I have no idea what to do? Anyone experienced this before?
    Please help

    Go to System Preferences and the on to the .Mac preference pane.
    You will see an Advanced Tab, click on that.
    You should now see all your 'Registered Computers'.
    If you computer is there then select it and the try to Unregister it.
    Ian

  • Please help me out,trouble with 7.1.2 update , it had deleted my photos

    I've updated my iPhone5 to 7.1.2 with iTunes and I lost all of my applications and photos ,messages, voices ,... of last month and the funny thing is I have a note from 3 days ago , so it shows I haven't lost the data, Is there a way to backup the photos and massages?

    Hopefully you can restore from a backup  ...
    If you have a new iOS device, or if you need to restore your device to resolve an issue, follow these steps:
    Connect your iOS device to the computer that has your backup.
    Make sure this computer has the latest version of iTunes.
    Choose File > Devices > Restore from Back up.
    If you're using iTunes 10.7 or earlier, right-click the device from the list and choose Restore from Backup.
    From here > iOS: Back up and restore your iOS device with iCloud or iTunes

  • HELP!! trouble with backing up

    I have all my music in my phone on my itunes playlist but not in my library? Im trying to update my phone and it wont allow me to because it says i might lose my songs, cuz they arent in my library.. How do i get them from my iphone 4 to my library? I'm new at this n rarely update my phone so i'm onfused..

    Connect the device to the computer and transfer purchases.
    All content on the device should be in iTunes.

  • Re: Help! Having trouble with what should be a simple v. (1/1)

    [Attachment Timer_v5.zip, see below]
    [Attachment Traytimr.zip, see below]
    [See first answer for additional information]

    [Attachment(s) for question]
    Attachments:
    Timer_v5.zip ‏35 KB
    Traytimr.zip ‏52 KB

  • HELP! Having trouble with what should be a "simple" vi. - Untitled.vi (1/1)

    [Attachment Untitled.vi, see below]
    [See first answer for additional information]

    [Attachment(s) for question]
    Attachments:
    Untitled.vi ‏34 KB

  • Troubles with effects and colors in FCPX 10.1.4

    Hi to everybody.
    I have a problem with colors using the effects.
    Lets look at more less neutral picture (picture no 1)
    ftp://ftp.strefa.pl/Zrzut%20ekranu%202014-12-16%20o%2022.34.30%20%283%29.jpg
    If you look at the RGB Parade you see the down part of the RGB distribution is ok.
    But if I start to use any effects the Parade changes in this way:
    ftp://ftp.strefa.pl/Zrzut%20ekranu%202014-12-16%20o%2022.34.54%20%283%29.jpg
    You see, that the down part of the color distribution (for all 3: red. green and blue) is cut-off, even when I use the effects which shouldn't influence on the color.
    I spent some hours to find any logic, and I discovered following regularity:
    1. The source movie I imported came from Nikon D7100 (.mov), 1920/1080i
    2. The behavior of FCPX during the playback of those clips is crazy and ustable (few seconds like in pict.1 few second like in pic. 2).
    3. I have instaled the newest versions of Nikon D7100 firmware and of course FCPX 10.1.4. I think (not 100% sure) the trouble with FCPX appeared after 10.1.4 update.
    4. I don't have any troubles with other camcorder (Canon XF 100)
    Did somebody have simillar effects / troubles with FCPX? Any solutions? I have a job to do, and this situation completly devastating my deadlines.
    Regards
    Rafal Seredynski
    iMac i5 2.5 GHz, 8GB RAM, AMD Radeon HD 6750M 512  MB

    You would probably find more direct help by talking to other Nikon shooters who use FCPX. M
    I don't know anything about the Nikon codec or why it might be giving you trouble while others do not but have you tried simply transcoding the footage to ProRes422? Your files will expand by a factor or three or four but you will not have these difficulties.

  • Only had my iPhone 5 a week and already I'm having trouble with the home button? Any soloutions

    Only had my iPhone 5 a week and already I'm having trouble with the home button? Any soloutions

    Sure. Take it back. If you got it from new it has a warranty.
    Or describe the problem fully in case we can help.  "Having trouble with the Home button" doesn't give much of a clue....

Maybe you are looking for