Sound playing is very poor
desktop config:
hp desktop 6000 pro.
cpu:e7500 core2 duo cpu 2.93g
sata hard disk
problems: when i use adobe presenter to listening online course, the nework speed became slow, and sound playing is very bad.
current solution: turn off core2 duo2 cpu functions from BIOS, the problems is solved.
is there someone can explan this issue to me? and give me a better solution without turn off core2 duo2 cpu functions?
thanks
charles
Hello button172
If you are having an issue with your purchase, then report it to the iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G.
Similar Messages
-
Please Please Help...My t6100 sound quality is very poor
I cut the speakers wire to extend the wire to be make as home theatre. i cut four speakers wire and extend it. but i didnt cut the front right speaker which is enabled with sound control. after fixing it the sound quality is very poor other than front right speaker...any one knows please help and give solution....
Hello button172
If you are having an issue with your purchase, then report it to the iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G. -
I play music on my hi fi via an airport express attached to my iMac.
Since installing maverick the sound quality is terrible and I get frequent distortion, which never happened before.
I have reset the airport express and reconfigure my wireless settings. I have also used Ethernet on its own but still get the same sound problems.
I would love to turn itunes sound off as you used to be able to do, but this I believe can't be done.
Has anyone else been having the same types of problem, and better still has anyone got the answer?Radcolt wrote:
So if I connect my ipad or iPod to an airport express that is being "extended" from the main airport express (the main router which is plug into my audio system), I should still be able to listen to my music, correct?
Yes but be sure to turn on Airplay at whatever Airport connects to the audio.
Radcolt wrote:
Also, will the date rate be decreased if they are connected by cat 5e Ethernet cable? I thought signal drop is minimal.
That's a whole different ball game and a much better solution if it's practical to implement. The data rate will not decrease. -
No sound or very poor one from front speakers T7900 system
I have a T7900 system and sudenly I have no more sound or a very poor one from the front speakers (left and right). The others (central, rear and subwoofer are working fine). I tried all configurations posible and from the control panel but still no result.
Anyone can help?Hi,
Try swapping the front speakers with the others, this should tell you if the speakers are faulty. You might want to get in touch with support for further assistance on this. -
HI,
I just procured my Nokia C6 2 days ago, sound quality is very poor..cant even hear loud when mobile is ringing..
any suggestions to increase sound ?check that volume level is set correctly ,you can check this in profiles ,also you can try using a loud mp3 tone if you wish dont forget to activate the profile your intending on using
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
Why do my speakers not play music? I know they work because when I go I change my ringtone all the sounds play. I am not a very happy costumer right now and would like an answer to my problem. Thanks.
What happens when you play music? Do the hardware volume controls work when using the Music app?
-
Hi since I put the new update on my ipad. The sound quality on the ipad is gone very poor it's sound very tinny. I just wondering if there is going to be a update to sort it out. Thanks
Hello Tollykev,
Thank you for using Apple Support Communities.
It sounds like you have some audio issues with your iPad after the iOS 7 update.
I want to recommend the following troubleshooting from the article named:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
Regards,
Sterling -
L505-S5990 sound volume very low. My wife and I have the same laptops both have very poor sound. Is there any fix driver etc.
golfnut10 wrote:
L505-S5990 sound volume very low. My wife and I have the same laptops both have very poor sound. Is there any fix driver etc.
The L505-S5990 laptop (and other models in the L505 series line which use the Realtek HD audio drivers) have not been configured properly when they were initially shipped. This is a two step process.
First, either update to the latest Toshiba audio drivers via the Toshiba Support web site, or by downloading the latest Realtek HD Audio drivers from the Realtek website.
Second, once the audio drivers have been updated, enable "Loudness Equalization" on either the Start --> Hardware and Sound --> Realtek HD Audio Manager --> Sound Effects tab, then click OK to save the setting change. Or on the Start --> Hardware and Sound --> Sound --> Speaker Properties (select Speakers then the Properties button) --> Enhancements tab, scroll down the list of sound effects to enable "Loudness Equalization" then select the OK button to save the setting changes.
Once the drivers have been updated and the "Loudness Equalization" has been enabled the system sound audio level is much louder, however you may find the DVD and Audio CD audio levels are still low. No real fix for that issue yet from Toshiba other than to experiment with the various sound settings. -
Very poor sound quality on bluetooth headphones through HP Envy 700-074 desktop
I recently purchased a pair of Bose AE2W wireless bluetooth headphones to use with my HP Envy 700-074 desktop computer. After successfully pairing the headphones the sound quality is extremely poor. I know the headphones are not the pronblem since they sound beautiful when paired with my iPhone or iPad.
I have tried updating the driver, but I have the most current version installed according to the computer. Adjustment of the Beats Audio controls or any other sound controls does not help.
SKU:H5Q09AA#ABA
CK SN: {Private Information Removed}
704219-001MX
WO:000037025247
Any help or suggestion much appreciated. ThanksUpdated OS to Windows 8.1 and now I have ABSOLUTELY NO SOUND on any bluetooth audio devices. From bad to worse.
-
Re: Sound is very poor on MBP 2011, any solution?
Hi,
I have been trying to wach videos either through dvd or netflix, but sound quality is really poor. I have to use headphone, then only can hear the sound better.
Anyone having same problem? or any solution for this?
Thanks in advance.Hello,
Yes.
I did following:
1) System Preference > Sound
2) Sound Effects > internal Speakers
I have kept output volume as maximum. -
I am so disappointed as my iPhone 5 s is very poor for calls and repeatedly drops calls. I've contacted Orange and done a reset to factory settings with no improvement.These calls are to landlines. My iphone4 was excellent in comparison . I've requested an Apple support call tomorrow - any other suggestions or similar experiences? Call bars are much lower too on this new phone and wifi fails too with frequent fail to connect to server messages. I so regret having this phone..
I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot! -
GT680 - Very poor microphone quality [sample included]
Ever since I purchased the MSI GT680R-008US, I noticed that the microphone quality was VERY poor. Here's a small sample that I recorded. I was right next to the microphone at the time: http://www.zshare.net/audio/898240503bc24764/
I've tried playing around with every possible setting, but couldn't find anything to help it (or anything at all, for that matter).
Is the microphone really naturally this crappy?Hi igardner
You could try the marked solutions in this link, it could possibly be the same issue as the one in W520.
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W520-bad-microphone-Usable/m-p/528497#M19223
By the way, does your speaker produce whine / high pitch sound during skype or any sort of conference call?
Happy 2012!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62... -
Published for iOS, sound plays but no screen.
Hi,
I have completed a new game that runs great on Android - created using Flash Builder 4.5 and Flash Professional. I got all our Apple stuff out of the way and then also compiled for iOS. Then I deployed to my son's iPod Touch 5 via TestFlightApp.com. He installed and ran and we get the sound but no screen. I'd really like to finish debugging and then deploy this app for both droid and iOS at the same time (in the next few days). Can someone tell me why the SWF's that are the UI of the app are playing sound but not showing up on screen? How can I fix this problem?
BTW, please forgive the fact that the site is under dev (will be completed and polished before go live), but you can get some idea of what the game is about at our web site: headshotgame.com.
Best,
AlOoops, spoke too soon...
After we recompiled all our FLA's to SWF's and added them as assets to our Flash Builder project, it did not work again (SWF sound plays but no graphics display). So, we went back to the earlier test solution and it did not work either?!?
Finally, we compiled using the quick compile selection of Flash Builder. The intro screen showed up all the sudden! But, none of the buttons work and you can't navigate to any other of the screens. Sadly, this is not answered and I don't know whether this belongs in the Flash Builder or the Flex forum as I don't know what is causing the problem.
All of this works perfectly on Android. Same code on iOS does not work. Perhaps it's the fact that I'm testing on an iPod touch with iOS5?
I have people waiting to test this app and help me get it live but I can't seem to get it to run on iOS. Please let me know if I can provide any other info to help you help me.
Thanks!
A summary of our problem:
We have multiple SWF's that are compiled in Flash Pro that make up a larger mobile app that we built in Flash Builder.
We add the Flash Pro SWF's to Flash Builder as assets of the project and use the Navigator to move between them with event listeners bubbling up from the buttons that are in the SWF's.
There are many SWF's - most screens have multiple SWF's on them.
All of this works very well on Android.
The same project compiled for iOS creates an IPA file but when the IPA file is deployed to the device, none of the screens show up but the sound plays.
There is only one way to get a (the first) screen to show on the device which is to set Flash Builder packaging method to "fast". Yet, getting the screen to show is useless as it won't allow you to navigate (and the SWF behaves differently in other ways compared to Android).
I am testing on iPod and will recruit other iOS device users to test as well. The iPod I am testing on is an iPod touch with iOS 5. -
Export to HQ DVD very poor quality
Hi all,
I've been trying to export to an HQ DVD, meaning I've chosen the highest settings, ending up with a 5552Mb File for 75 mn... which I believe would be enough to have a very high "normal"definition .
ok I know it wouldn't fit but I burned 10mn of timeline with these settings, to check, and the quality is very poor. I believe as bad as a VHS second generation copy... My titles appear like a very low photoshop jpg compression, and all lignes and shapes are surrounded by some kind of compression artefacts not acceptable even in normal def. (not mentioning the interlaced lines at the edit point when the clip has been altered in size or color etc...) You get the picture...
I had a look at the calculator, that is not much help finally when exporting from premiere.
What I want to do is export my (xdcam hd 50mbps 1080 50i).mxf timeline to a beatiful dvd that everybody can play....
Should I go for a third party encoder?
Also, It seems that when I export and burn through Encore, I get a slightly vertically stretched frame, that ellipses the perfect circles I have on the timeline. Although I respect the pixel ratio of 1.0, 16.9 screen... wide screen etc... I always get this stretching. (Playing the file from the pc is correct.)
What puzzles me is to see some nice SD DVDs around, burnt from HD files and I'm not able to get at least the same results from a broadcast approved camcorder and premiere CS6.
Export settings are:
Help please... Thanks.Glad to help.
I have been using Encore every since it was first released and on many occasions I have pruduced MPG files encoded at different rates so that I can demonstrate to the audience at my presentations how the different settings can affect the end MPG movie
With Encore I have found that the settings I gave you earlier give the best compromise results, in my tests having the max setting at its max position and the target above eight can produce flawed mpeg files. this is not as a resullt of one off encoding but I have repeated it with each version of Encore with varying results, certainly using Encore in my CS5.5 Suite produces softer DVD's than earlier versions, in my opinion that is..
With HD source my Panasonic HMC 150 Encore produces reasonable MPG SD files but the Canon 7 D produces more artifacts.
Enough of a remeniss and ramble, good luck
Addiitonally with the completed DVD there is a distinct difference depending upon which DVD player is used, using the same DVD my Sony 3D bluray player upscales better than my Panasonic Bluray recorder, whereas at a club I go to the Pioneer AV amp upscales the DVD even better, therefore I would conclude that the device playing back the DVD can have a vast effect on what you see. -
After exporting a slideshow in LR5 to USB or DVD playing quality is poor. Any suggestions?
After exporting a slideshow in LR 5 to USB or DVD playing quality is poor. Any suggestions?
It would be more helpful to understand your workflow and what type files you have made.
Are you using audio from both cameras? Do the changes/problems correspond with the camera switch?
Try this with a minute of the problem footage
Export a QT reference file(export QT(not QT conversion)-uncheck make self-contained in the lower left)
(a reference file is like a band-aid- do not use more than once). Listen to it in QT- how does it sound?
If you have a mix/audio problem here it is most likely related to what you are exporting from FC.
If it sounds good:
Create an AC3 and MPG2 of your minute test
Create a DVD with a track of your 1 minute test.
Build the dvd to a folder on your desktop.
Open the Video_TS(from the build folder) in the Mac DVD player App. Whatever you see and hear in the app is exactly what will end up on the burned disc. This is the best way to QC the DVD before you burn it.
Maybe you are looking for
-
Creative Livecam Vista IM - software problem (WebCam Center)
Hello, I've just had my camera installed with all the software included. There's one problem - every time I open the WebCam Center, the program tries to install something called "Photo Gallery". However, it's impossible to install that, because some
-
Invoice Correction Request - RK
I created an invoice correction request with reference to an invoice. Changed the quantity on it from 3 to 1. So the customer will need to pay less than what they were supposed to pay. No amount has yet been received from the customer. Now where do I
-
My Time machine has stopped backing up saying there are some read only files.
My Time machine has stopped backing up and says that ther are some read only files preventing this. What steps do I need to take to fix it?
-
Adobe Content Viewer (desktop preview) Missing with latest update (v.8.0.9.23)
InDesign CS6 just promted me to update my Folio software and now my Adobe Content Viwer is missing. When I try to preview a Folio, I get the following error message: Has anyone had this problem?
-
Timeout error when calling package
Hi, I have an application that calls a package, this package has a process that lasts 40 minutes, 30 minutes with the browser displays the following error: Explanation: The request timed out before the page could be retrieved. Try the following: Refr