SoundCard Driver update not stick

Hi I currently have a problem with my Creative Audigy SB driver. I dont know how it got messed up but I dont have an Audio Mixer Device. I can hear some sounds but some run like on quicktime and some other programs dont run. After checking a few things it led me to that driver. So of course I gave it an update and bwalah! its fixed got my Mixer Device back... or so i thought. Shortly after i had to reinstall the driver again and again and again. I managed to figure out that after a reboot or two the driver deletes itself or rverts to its old one. Any idea how to fix this ?

For starters, you might be better to post in the soundcard forum.

Similar Messages

Soundcard driver does not support DirectSound ?

Hi,
I just had to reinstall my OS, (Vista) Then I reinstalled AE CS3, now when I open AE I get a message saying that,
"The currently installed soundcard driver does not support DirectSound Input. Recording audio is not possible"
My soundcard is a 'High Definition Audio Device' made by Microsoft, it works fine and all the drivers are up to date.
Does anyone know anything about this problem or how to fix it ?
Thanks in advance.
J.

Well, what driver did it use before you re-installed? A standard MS HD Audio device doesn't mean anything. It would install that standard driver on a 10 year old computer, as it's more or less an emulation device. You will have to install the correct chipset specific driver, which probably merely requires a manual initialization of Windows Update with extended options. likewise you should be able to find out what audio device is in your system e.g. by using SiSoft Sandra to probe it...
Mylenium

Thunderbolt FW update not sticking

Hi all,
I've got a strange problem with my 27" i7 2011 iMac. I installed the Thunderbolt 1.0 Firmware Update via Software Update a while ago, but Software Update still sometimes thinks it's not installed and offers it again. When this happens, the Thunderbolt page in my System Profile comes up blank. If I then reboot the iMac (without installing the update again), Thunderbolt starts working and Software Update reports that I have no new updates available. Then, a few reboots later, Thunderbolt disappears again.
Anyone got any ideas what might be happening? The only potentially relevant detail I can think of is that this iMac's HD was cloned from another one that got returned because of a fault.
Cheers!
J

I had a problem with the update - after the update was complete, neither my Thunderbolt Display nor my Thunderbolt hard drives were recognized.
I had to reset the SMC -> http://support.apple.com/kb/HT3964 - a couple of times before everything was back to normal.
Give it a try - let me know if it works.
Clinton

Qosmio F10: nVidia GF Go 5700 - driver update not successful

I've a problem:
I'm not able to update the driver of the nvidia from the 6.14.10.6612 (that are from 2004!!)
I tryed on nvidia home page, but none of the driver works with my notebook.. (I read that this is not recommended on others post, but It was my only chanche !)
I also tryed to download from toshiba the F30 nvidia drivers... without success!!
I need to update this driver because when I try to install direct x9.c windows MCE give me an error, an it's due to the driver 6.14.10.6612 that have not WHQL certificate...
please give me an answer...
I need to install it as soon as possible!!

I followed all the instruction on laptopvideo2go...
I tried a lot of driver, in the end I found (helped through their forum) a good driver I was able to install it on my toshiba laptop...
What's the problem?
That driver (the only I could use form my Toshiba Qosmio F10 with GF 5700) is not windows certificate (WHQL)...
Now I resolved my software application problem with a trick, I modified the .cfg installation file in the way that the application does not ask for DirectX 9.c during installation process...
So now the SoftWare seem works correctly...
By the way, I was not, and I'm not able to install DirectX9.c on my laptop yet!
And the next Software I'll need, what will happen if it requires DirectX9.c ...?!?(should I have to loose 5 working days to install it?)
Thanks all for the attemps to help me!

IPod driver update not found

Hi,
I got a brand new Nano for Christmas and cannot get it connected to iTunes. I have tried the 5 R's, read through a number of forum messages but have not found anything that works yet. The iPod is recognized when hooked up to a newer laptop, but on my computer it doesn't show up in iTunes or Windows Explorer. I've got the latest version of iTunes installed.
I've tried all 4 USB ports on the back of my computer. The Device Manager says that I have a Standard Enhanced PCI to USB Host Controller which I understand means that I have USB 2.0 ports. There is an entry for iPod under Other Devices that has a yellow question mark on it. When I look at the properties it says:
This device is not configured correctly. (Code 1)
To reinstall the drivers for this device, click Reinstall Driver.
When I try to reinstall it does not find any drivers automatically and does not find anything in C:\windows\inf. There is an entry for Apple iPod USB driver under Universal Serial Bus controllers and the properties say that it is working correctly. However, when I choose the troubleshooter, it says "This application has failed to start because bnts.dll was not found. Re-installing the application may fix this problem."
The iPod itself says "Connected Eject before disconnecting" when hooked up to the USB port.
Any help would be greatly appreciated!
- Laurie

hmmmm. okay, i think your idea about the PC not recognising what kind of ipod it is might be on the money. that can sometimes hit people if the connection to the ipod is flaky to precisely the right/wrong degree (enough to see an ipod, but not enough to recognise it correctly).
so perhaps let's keep working on the poor connection possibilities. trying a different cable was a good idea. also check to see if you can get better recognition on a USB port at the back of the PC rather than the front, or if you unplug other high-power USB 2.0 peripherals.
if you have access to another PC with iTunes 7.0.2.16 installed, try seeing if you can get better recognition for the restore on that.

Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

My XP machine crashed, I reinstalled Premiere Pro 2.0 with Windows 7, and I got the following error: 'The Currently installed soundcard driver does not support Direct Sound Input. Recording audio is not possible.' The soundcard drivers are updated. Any ideas? Here's what I have: AMD Phenom II X4 965 Processor 3.40 GHz 8 GB, 64 bit. Thank you for looking.

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Sql Developer Driver update

Dear All,
I am using oracle 10G r2 on windows.
I downloaded sql developer for converting the ms sql database into oracle 10g database.
but the thing is that when i m trying to give third parti database driver to sql developer i.e.(jtds) driver its not updating the same.
can anyone tell me step by step driver update not online but offline updation for sql developer.
what i know is
1) go to tools and click on the "preference"
2) go to help
3) check for update.
but it not working please reply me if anyone know step by step of the driver update .
thnkss..

This is PL/SQL forum. You need to go to the SQL Developer forum to get proper answer.

Not able to add driver update during Solaris 10 installation on IBM x3550

I am facing a problem with installation of Solaris 10 on IBM x3550.
My question is not specific to IBM server.
I am trying to add SAS driver during Solaris 10 installation. I selected option "Apply device driver update" (option # 4). It is asking to insert driver disk. But only showing floppy (f) and cdrom (c).
IBM server 3550 doesnt have floppy drive and I have the driver image only in a USB stick. Unfortunately, Solaris 10 installation is not showing usb device during driver installation.
Is there any way we can add usb device to the driver update disk list??
Thanks in advance.

Does no one have an idea?

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

I have this issue. Album artwork was totally fine before. After this update, it is all messed up and even got messed up when transferred to my iphone.
iTunes doesn't have the artwork anymore, but then iPhone has it but shows wrong artwork with wrong albums.
Please fix!

External hard drive is not working on airport time capsule even after 7.7.2 firmware update.

External hard drive is not working on airport time capsule even after 7.7.2 firmware update.
I have the latest Airpor Time capsule 2gb. I specifically bought it so that I could have an external hardrive set up to wirelessly house my itunes library and movies. When i connect the drive, all i get is that the disk needs to be repaired.
the drive can works fine when connected to the macbook pro and I have run the verify and repair features in disk utility. I have also reset the airport timecapsule as well following these changes and still no change.
The 7.7.2 update says that it addressed the usb issue of not showing the drives but there are still problems as I cannot get it to appear.
Please help.
Thanks

How is the hard drive formatted?
Have you tried using a powered USB hub with the drive when it is connected to the Time Capsule?
(The USB port on the Time Capsule is borderline as far as power is concerned....you may need to use a powered hub.....even if the hard drive has its own power supply)
If the drive is formatted correctly....and....it has ample power, it will "show up" when you open AirPort Utility, click Edit, then click the Disks tab at the top of the next window.
In the example below, my Time Capsule drive is named "Backups" and another drive named "WD Drive" is connected to the USB port on the Time Capsule.
You should see the name of your Time Capsule drive (named "Data" unless you have changed the name) and the name of the USB drive if you perform the same check.
What do you see?

After security update my hard drive will not show

G4 Tower - Mac OS X - 733mhz.. After a security update 2 days ago i can not get my computer to boot. It comes up to the gray apple screen and just sits there. I put the install dvd in and went to disk utilities, but the hard drive does not show up at all. I tried to boot the computer in target mode from my laptop. It goes into target mode, but the drive never shows up on the screen. I put disk warrior in the laptop and launched it, and it seen the drive as a firewire drive, but the only option was to rebuild. I have a lot of info on the drive, and am hoping that I do not have to go to that extreme. Please help...

the only option was to rebuild. I have a lot of info on the drive, and am hoping that I do not have to go to that extreme. Please help...
I think you are misunderstanding what disk Warrior will do, and how it does its magic. Disk Warrior is a wonderful, powerful, tool and works well for many people. When it suggests a ReBuild, it is saying your drive is recognized and intact enough to attempt to construct a new (proposed) Directory.
It will scavenge all the information it can find from every possible source (including the existing Directory) and build a new (proposed) Directory of all your recoverable files. If the damage is not severe, nearly all your files will be included in the new (proposed) Directory.
It then lists the differences between the new (proposed) Directory files compared to the old (existing) Directory files, and invites you to look at them side-by-side, if you like. ONLY if you approve, will it replace your old damaged Directory with the new (proposed) one. If you choose not to replace your old Directory, it just quits and nothing is changed on your Drive.

After updating to iTunes 12 the Apple Mobile Device USB Driver is not listed, I use Windows 8.1, how can i solve this?

After I updates ITunes to the latest version (12), ITunes wont find my iphone and Ipad anymore, after searching I found that the Apple Mobile Device USB Driver is not listed anymore, on the support website of Apple it doesnt explain how to solve this,.
I use Windows 8.1 and so now also ITunes 12, both my Iphone 4S and Ipad Air have the latest IOS version.
I hope anybody can tell me how to solve this that the Apple Mobile Device USB Driver is back, thank you

Found a possible solution for me.
While the phone was plugged into my computer and iTunes is CLOSED.
1. I went to Services in Windows.
2. I selected Apple Mobile Device and right clicked and selected "Stop".
3. Then I right-clicked again and selected "Start".
4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall". You will get a warning about uninstalling the device. Click OK.
5. At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
This re-installed the iPhone and everything started working again.

What can I do about driver updates that will not install because of an "unknown error".

I have an HP p6530 Pavilion that is taking a while to startup. Not real long but longer then it should. I tried to install driver updates from Intel for the Chipset and RAID but when I download and install it will not finish the install because of an "unknown error" and then setup exits. I could really use advice from anyone that can help.

Have you tried to disable your virus protection and any running programs in the system tray? Turn off any programs that are not necessary before you run the updates. Make sure you run the updates as administrator (right click on the driver install program and click on run as administrator).
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

How do i update my IDT soundcard driver? HP pavillion DV7 4032EO

Dear HP forum!
I've recently stumbled onto a problem between my IDT soundcard driver and my Punkbuster(anti-cheat program).
so when they collide it causes HARD freeze witch requires a manual shutdown or reset.
the IDT soundcard driver on the HP support site is so, so, so, old!
PLEASE HELP ME!
my device:                   HP pavillion DV7 4032EO.
my driver_id:               HDAUDIO\FUNC_01&VEN_111D&DEV_7605&SUBSYS_103C149C&REV_1004
my 2nd driver_id:       HDAUDIO\FUNC_01&VEN_111D&DEV_7605&SUBSYS_103C149C
Kind Regards
Magnus Peter Lassen
sorry for my rubbish english!
This question was solved.
View Solution.

Hi,
For video card, I know users can update Nvidia drivers but getting a lot of troubles to update ATI drivers. The machines just won't do the updates.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

SoundCard Driver update not stick

Similar Messages

Maybe you are looking for