SPA devices - factory reset/upgrade firmware via HTTP?

I've a number of clients using SPA502G's, SPA504G's, and some of the older/Linksys SPA-922 devices with a hosted PBX.
Getting these devices to resync via http is really handy, e.g.
http://192.168.1.12/admin/resync?http://prov.domainname.com/something
I also seem to be able to reboot them via http using:
http://192.168.1.12/admin/reboot
I've just checked the provisioning guide to see if there's any documentation suggesting that I can perform other functions via http, namely:
Firmware updates, or
Factory reset
Any clues?
Similarly, I understand that a sip notification can also force a resync/update, but I can't find any official documentation describing how the SIP message should be formatted, e.g. to specify a URL in the notification.
Can anybody provide pointers to documentation for these?
Thanks in advance!
Mark

You can upgrade like the following
http://192.168.1.12/upgrade?http://domain.com/filename.bin

Similar Messages

  • Nightmare after 10.2.1.573 update (device 'coma', factory reset, cannot restore via blackberry link) (on Etisalat)

    3 days ago, I updated my Q10 as prompted to the newest software (I'm in the UAE and use etisalat)
    Following the update, I rebooted the phone and was faced with the dreaded blackberry 'coma' - where it reboots but then hangs at 99% or 100%
    Reading some advice, I let it sit for 2 days at 100% to see if it would eventually resolved - it didn't.  Battery pulls and resets etc also ineffective
    I plugged it into my computer and was able to back it up via the blackberry link software.  I then did a factory reset and installed the latest software (10.2.1.573, my OS version is 10.2.1.1925
    The phone now boots up fine and syncs with BBerry link - but it will not restore the device.  The error message I get is "restore did not complete.  There could have been a problem with the device or connection during the restore.  Verify that the device is turned on or connected"  Rebooting the computer, reinstalling link etc, does not work, neither does only reloading part of the data.
    Can anybody help, I am desperate, and currently have no way to restore and of my media or contacts!! (my plan with etisalat does not suppost blackberry protect so I don't have that)  Is it true that this is a known problem with blackberry link?
    I've heard of people having issues when then they use new leaked updates and then have to downgrade, because BlackBerry Link will not let you restore a backup from an OS that was made on a higher OS version.  However this is not the case here - the backup file was made BEFORE the upgrade so will the the same or lower version of OS

    I have the same exact problem with my Q5 I went to many phone shops but no luck ,im trying things my self I any thing worked  I will let you know and please if you have a solution share it with us . I know how does it feel.
    Good luck 

  • HT3728 I have factory reset and firmware updated my airport extreme, but although it should have dual network capacity, I can now only create a single network.. Suggestions please

    I have factory reset the extreme base station and updated firmware, however, now there do not appear to be dual networks. Why is that

    Then you may be possibly referring to the Guest Network option?.....which would not be enabled by default when you reset the device back to default settings.
    You can use AirPort Utility to enable that function.

  • E75 fails to upgrade firmware via USB

    Hi,
    My Ovi suit tells me that there is a firmware upgrade to my E75. From 202.12.01 to
    211.12.01.
    I have now tried at least 10 times to upgrade via USB cable but all of them fails before they even start to copy the firmware to the Phone.
    I have tried through OVSuite, PCSuit and also with Nokia SW updatear stand alone but all fails with slightly different error messages.
    Ovi suite 2.5.8se only tells me it fail because of a disconection withthe phone
    PC Suit tells me that I can't connect the phone through an USB hub (which I haven't ).
    The strange thing is that I can see that they are comminucation becasue both sw are able to identify my phone and also what FW I am using.
    What could be wong.
    All the SW is that latest versions and I have disabled firewals + antivirus.
    Also both my laptop and phone have fully charged batteries
    /MrG
    Solved!
    Go to Solution.

    What exact version do you have *now* installed on your E75?
    Do you know which product code you have?
    Have a look here:
    http://www.nokia.co.uk/support/product-support/device-software-update/can-i-update
    Please note that the product code written on the paper label may not necessarily be the product code of your telephone. If you bought it from Nokia it probably is the same. In my case, I bought it from an online store in Germany and the internal product code was not the same as the one on the label.. which is suspicious, but anyway.

  • SPA922 Factory Reset Procedure Does Not Work

    Is there a hard reset option?
    Thanks!

    Linksys FAQ states:
    4:   Lost web password for SPA device
    To reset your SPA device to the factory default values, unplug your Ethernet cable, access the voice menu (****), and press 73738#.
    Leaving power on the phone of course, and unplugging the Ethernet doesn't allow access to voice menu via (****); I am able to access the phone menu and select 8.VoiceMail which prompts for the password, but entering 73738# returns a wrong password response.
    We received 10 of these phones from our property managers as a signing bonus for our new offices because they new these phones would work with our voip services.  Half of the phones did not have passwords and are already configured along side our Polycom SIP Phones, the remaining have this password issue.
    My definition of potential hard boot process as an example; is holding down some sort of a rest button or internal jumper setting and powering it up to clear the onboard PROM, EPROM, EEPROM, etc.
    Thanks for your response!

  • Will not factory reset!!!

    I've been getting the notices to install update to 4.0.4.  When I begin the install the phone will automatically restart and go to this black screen with white google logo....and just freeze there forever.  I've tried this a bunch of times always the same result.
    So I did what verizon told me to do and that is to do a factory reset.  Went into the settings app and did factory reset, but my phone did the same thing again!!  It just has a black screen with white google logo and it just stays like that forever!!!!  I tried this many times too all with the same result.
    Then I tried doing the alternate method of a factory reset as shown here: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=51446#alternate
    The alternate method also has the same result too in which there is a white google logo on a black screen.
    Can anyone tell me how I can get this phone to do a factory reset????
    I feel like my only options is >Post edited to comply with VZW ToS< or get a crappy refurb phone.  What do you guys think I should do?
    Message was edited by: Verizon Moderator

    Tidbits,
    Would you know what my problem is....?  I have an unmodified Samsung Galaxy Nexus and I've had all kinds of issues with installing the IMM76K over the air.  I've been getting the install notices and when I click install, it reboots, but the only thing I see is a black screen with a white google logo and it'll stay on this screen forever.  Only way to reset is to pull out the battery.  I've tried this multiple times all with the same result.  Finally, I gave up and did as recommended by Verizon and that was to do a factory reset.  Interestingly (or unfortunately), when I do the factory reset, it restarts and all you see is a black screen with white google logo and it stays on this screen forever.  Only way to get out of it is to pull out the battery.  I tried the alternative method of factory reset which is to hold down the power and volume buttons, but I got the same result too, in which it freezes on a black screen with white google logo.
    Can you please tell me what might be wrong with my phone.  Again, my phone is not modified in anyway.  Thanks.
    It seems like something is wrong with my system, or my bootloader.  Additionally, my phone has really been solid, no dropped calls, no loss of reception, nothing weird, so I'm really hesitant in getting a refurb phone that might have additional problems. 
    Anyhelp from anyone would be greatly appreciated.  Thanks!!!!!

  • How to completly factory reset it

    my friends changed all IDs and paswords as well as disabling it. how can i factory reset it completly?

    http://support.apple.com/kb/ts3694#9006
    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

  • Resetting firmware via factory reset?

    Hi,
    I have a late 2008 Macbook (the unibody with removable battery one). I want to roll back my firmware to an older version, because apparently I have this weird, discretely released version of the current firmware that doesn't allow third party batteries. However, apparently rolling back the firmware is not easy. I was told by an apple employee that if I do a factory reset I've got about 70-30 chance of this resetting the relevant things.
    So basically, I want to back up my files, but I don't want to use an application that carries over everything (like time machine) since I want all the system stuff to be reset. Basically, I want to drag n' drop. But of course, I want to drag and drop so as many things stay working as possible. Any tips here? For example, can I just drag and drop the applications folder, or will I want to include the "Library" folder if I want thing to actually work? Or am I better off just reinstalling applications?
    Thanks in advance!

    Firmware only goes forward, if one bricks your machine Apple just replaces your logicboard or if they can't your out of luck.
    However I've read stories/threads online it's possible to downgrade the firmware, but I don't know where I saw it.
    This is the method to reinstall the firmware in case it gets lost out of NVRAM or botched update, but it won't downgrade it according to Apple.
    Restoring firmware on Intel Mac's
    So now you at least know how to reinstall the firmware, but I've read the downgrade can occur in place somehow.
    Sorry I don't have any more information, you'll have to search the more geekier Mac hacking sites.
    Ask on MacRumors.com, there are a lot of hackers there or can point you in the right direction if it exists.

  • SPA942 - Factory Reset Via Jumpers

    We purchased nine of the SPA942 phones from a VoIP provider who installed and provisioned the phone.  The company went out of business and sold our account to a new provider.  The new provider does not support the SPA942 we were forced to buy new phones.  We want to reset the phones prior to letting them go.  The old service provided provided the "admin password" so we can do a factory reset.  However, of the nine phones the password worked on only three of them.  Since the provider network is down, they can not help us any further. 
    So we are looking for a way to reset the remaining phones and reset the admin password. 
    How can we do this.  Our engineering department has opened the phones and there are some jumpers and we were hoping one of them would force a complete reset.  However, they can find no technical documentation on what the jumpers are for.
    Please help, this was an investment for us and we thought that by going with Linksys we would have access to some good documentation on this. 
    Thanks in advance for your help.
    Solved!
    Go to Solution.

    While your situation clearly sucks, I think it's wrong to Blame Linksys here. When company X makes a deal with a hardware maker to resell a branded device, it wouldn't make much sense if that branding is easily removable (the branded hardware is often sold with very little in terms of margin so it's the contract you get with the device to make up for it). Think of branded and SIM locked cellphones.. while it's not illegal to remove such restrictions, you often don't have a legal recourse to demand the liberation of your device. So, if you purchase a device, make sure it is an unbranded and unlocked one, or you risk making the same experience over and over again. Unfortunately, these phones aren't so prevalent that there is enough interest in unlocking... otherwise you'd see unlocking sites pop up on the Internet like we have sites to unlock cellphones. Also, I know this isn't helpful at the least, you said you made an investment in Linksys.. but you really haven't.. you made an investment into hardware from a certain provider that's reselling Linksys product with a proprietary/locked down firmware.. it's not quite the same thing. While Linksys is somehwat less than accomodating when it comes to fixing bugs, they keep on improving the phones - the 5.x firmware was quite an improvement, and now we have the free 4 line upgrade. Compared to other phones (I have a bunch from a bunch of different manufacturers), I think I got about my money's worth. Linksys' policy on support is that you have to get it from the company that sold you the devices (at least for voice products it is.. it used to be different and I find it deplorable that it changed, but it is what it is) - so if the company is out of business, you're SOL (or if the company cannot give you support... there's a lot of Linksys resellers out there who will give you no support whatsoever for the devices you buy.. leaving you stuck asking q
    There are two essential pieces to tracking down a problem with your VoIP equipment:
    The configuration of every device involved
    SIP protocol traces
    And don't forget: there's no such thing as giving too much information when describing a problem.

  • HT3728 Does factory reset go back to latest firmware update.

    I have resently updated my airport express to latest firmware. The airport express is configured as an extension to my wifi with an Extreme as main device.
    Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
    I have since then tried to do factory reset several times without getting the device up and running again.
    When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
    I have not been able to discover the express from my iPad, iPone or iMac again.
    Could the reaons be latest firmware update?
    Any advice to get it back to normal?
    Thanks,
    Per

    Does factory reset go back to the latest firmware update.
    A Factory Default Reset will not affect the installed firmware.
    Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
    A solid amber light is unfortunately an indication that the internal power supply inside the AirPort Express is failing, or has failed.
    I have since then tried to do factory reset several times without getting the device up and running again.
    The AirPort Express has failed, and will need to be replaced.
    When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
    This is yet another confirmation that the Express has failed, and will need to be replaced.

  • How to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB

    how to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB?
    The 7921g is connected via USB to a PC. I am using a browser to access the phone. Documentation says "Click the Phone Upgrade hyperlink under SYSTEM options. " but that option is not present or not visible.

    You can use the Phone Upgrade area on the web page to upgrade firmware files on the phones by using the USB connection or by using the WLAN. To upgrade the phone software, enter the phone software TAR (firmware file name) or use the Browse button to locate the firmware file on the network.
    To display the Phone Upgrade area, access the web page for the phone as described in the Accessing the Configuration Web Page for a Phone section available at http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/21adm50.pdf

  • HT3728 I keep getting 'an unexpected error occurred. Try again.' error message when trying to reconnect to my AirPort Time Capsule. I have soft and hard reset and, eventually, factory reset the device. What do I do to correct the error?

    I keep getting 'an unexpected error occurred. Try again.' error message when trying to reconnect to my AirPort Time Capsule. I have soft and hard reset and, eventually, factory reset the device. What do I do to correct the error?

    Hi Philjp,
    If you are having issues connecting to your Airport Time Capsule, even after a factory reset, you may find the following article helpful:
    Apple Support: AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
    http://support.apple.com/kb/TS4597
    Regards,
    - Brenden

  • After factory reset information shared across devices won't load

    Hello. I recently did a factory reset on my MacBook Air. I backed up my iphoto library and itunes library to external hard drive and was able to load those fine. But I am still having a problem with syncing media and data across devices. Maybe I'm missing something? I set up my icloud; the contacts, address book, etc. seemed to have loaded all the data. BUT: the information that is supposed to load through sharing across my ipad, iphone 5 is not loading. I thought the itunes would load my music just based on the sharing, but it is a good thing I backed it up. Things like ibooks, and the most recent photos I have taken on my iphone are not loaded.
    Please help: I need to know how get all my devices sharing again, and/or pushing media through itunes
    Any tips would be welcome. Thanks.

    Information that is 'shared' via icloud includes calendar events, contacts, todo items, notes, and safari bookmarks. Music that is on an iOS device isn't shared. If it is music you purchased from the Apple iTunes store you can redownload it or it can be moved from the device by using the Transfer Purchases option of the iTunes File menu when your phone is connected to the computer via the cable. iOS apps can also be transferred to the computer this way. New pictures will sync when the phone/iPad is physically connected but I'm not certain how old pictures that exist on the iOS device but not on the computer are handled. You may need to use a third party program to transfer these old pictures - as well as music not purchased from the iTunes store.

  • Factory reset through the device

    That is a really irritating solution. Is that really all you can do??
    I do not have my cable at home, and I am having the same problem. I am without a phone for at least the weekend. 
    There is no way to factory reset through the device?? Old blackberry devices had this. 
    Also all I did was upgrade an app through blackberry's app store. How can that cause such a critical issue?
    Is RIM working on that? I see this problem is very wide spread, makes you wonder what kind of QA work is being done on the dvices.
    [edited title]

    theomegachrist wrote:
    That is a really irritating solution. Is that really all you can do??
    I do not have my cable at home, and I am having the same problem. I am without a phone for at least the weekend. 
    There is no way to factory reset through the device?? Old blackberry devices had this. 
    Also all I did was upgrade an app through blackberry's app store. How can that cause such a critical issue?
    Is RIM working on that? I see this problem is very wide spread, makes you wonder what kind of QA work is being done on the dvices.
    Sure there's a factory reset... but not like a BlackBerry from five years ago, lol.
    Read this RIM Knowledge Base article to reset your device to the factory settings.
    KB18998 How to reset a BlackBerry smartphone to factory defaults
    In the future, please learn to create your own thread when you have your own personal issue to discuss... even if your issue might be "similar" the originally posted. yours is not the same, and posting in a existing thread like this just clutters the original posters thread.
    The "New Message" link is at the top left of each forum section page.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT1925 How do i factory reset an i pad 2 that is linked to some ones elses icloud to activate the i pad ? With the upgrade Ios7.0.4

    How do i factory reset an i pad 2 that is linked to some ones elses icloud to activate the i pad ? With the upgrade Ios7.0.4

    Hi DopeeBoii,
    It sounds like you may be having issues with Activation Lock in iOS 7; you may find the following article helpful:
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/ht5818
    Regards,
    - Brenden

Maybe you are looking for