Spam & Virus Blocker / Exchange 2007
I have been running the Spam & Virus blocker for a month and love it. I'm in the middle of an email server migration (Ex2003 to Ex2007). I wanted the blocker to start forwarding (SMTP route) to my Ex2007 box instead of my Ex2003 box. The blocker continues to tell me that my Ex2007 box is down (Monitor - Delivery Status) and no mail gets delivered. If I bypass the blocker, mail gets delivered to Ex2007 just fine. Any ideas on how to fix this?
Problem solved, it was an ID10T error. I was asking the blocker to SMTP route to my domain controller and not the Exchange 2007 box. Once I realized my mistake, I put the correct server name into SMTP route, and it works perfect.
Similar Messages
-
Hello
How is the license handled on the Spam & Virus Blocker? Our customer has approx. 120 Lotus Notes Mailboxes. But he only use 30 Mailboxes for external Mailing, the other Mailboxes are only used for calendar and internal mailing.
Can I take a Box for 50 users or will this not work? How will the Spam & Virus Blocker handle the license?
Thanks and regards
Lukerelayhost = 192.168.0.000.
I find it extremely unlikely that IP address is valid for your network (or any network, for that matter).
I don't know if you've masked it trying to hide the real address (there's no point since it's a private network address anyway), but just in case that is what you've set, you will need to change that to the actual IP address of the mail appliance.
I did that and tested sending an email to an outside address but no relay.
What do you mean by 'no relay'. Do you mean that the mail server delivered the mail without relaying it through the appliance? Or that the mail didn't get delivered at all?
What do the log files have to say about it? -
Problems with spam list in Exchange 2007
Hello, can anybody help me with this issue? A few months ago my IP got listed on spam lists beacuse of viruses one of my computers send out... I removed the virus instal antivirus NOD and block port 25... Now my client is sending email to a new customer
and he gets thist respond:
mta01.tlmnet.it #550 xx.xx.xx.xx is listed on se-reputation.rbl.spamrl.com as a source of viruses. ##
I checked this web site but i dont know how to remove it from this spam list...Did somebody had issue with that spam web site how can i remove ip from this site... I am sory if i posted to wrong forum but i
dont know what to do...Hi,
Do you mean your client is list in the spam list by your Exchange Server?
If so, I think the most efficient way is to contact the Exchange Administrator to check the spam list.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
FPE 2010 connection filtering AND Exchange 2007's "IP Block List Providers"
I'm getting a ton of SPAM the last several weeks.
FPE 2010 connection filtering seems to be working, but I wonder if I can enable Exchange 2007's "IP Block List Providers" as well
DavidHi,
Please refer to the following links.
Using connection filtering
http://technet.microsoft.com/en-us/library/dd639381.aspx
Question about using IP Block List Providers in EMC after installing FPE
https://social.technet.microsoft.com/Forums/en-US/28b856e0-7d87-4b92-944e-ac13e1574d46/question-about-using-ip-block-list-providers-in-emc-after-installing-fpe?forum=FSENext
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Exchange 2007 Block incoming meeting requests?
Hello,
Is there any way to block incoming meeting requests on an Exchange 2007 server and have it send a message back saying the server doesn't accept said requests? I know it can be done in Outlook with a rule but we would like to block them
at the server for any requests, not just a couple of users.
ThanksYou could look at hub transport rules. I cant remember if 2007 allowed a rule based on a message class.
I would also disable the processing of external meeting requests for mailboxes:
http://technet.microsoft.com/en-us/library/aa996340(v=exchg.80).aspx
Use the ProcessExternalMeetingMessages parameter to specify whether to process meeting requests originating outside the Exchange organization
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
Can anyone confirm that come December 31, 2015 the SPAM and VIRUS Blocker will become a brick with no more updates and no ability to to filter SPAM and Viruses?
Very troubling if true. Money spent on a hardware platform just to have it go EOL a couple of years later.Which model appliance do you have? If you have a "Blocker" which is the small business platform - EOL is listed actually 12/2011.
If you have a C-series, or larger... EOL information for hardware is based here:
http://www.cisco.com/web/ironport/c_x_series_life_cycle.html
EOL information for AsyncOS revisions specific is based here:
http://www.cisco.com/web/ironport/asyncOS_esa_eol_dates.html
-Robert -
Upgrading from Exchange 2007 SP2 to SP3 stops and fails with Performance Counter
We are upgrading from Exchange 2007 SP2 to SP3.
Exchange Server is on Windows 2008 Enterprise 64 bit OS -SP2
DC is on windows 2008 Enterprise 32 bit OS - SP2
When we run Exchange SP3 setup.exe GUI, it runs through the pre-requisites completely and then starts to configure the Hub Transport services but @ exactly 55% it throws an error window "Exchange Server Setup encountered an error"
On repeating this process i noticed it throws the same error at 55% while "Performance COunter Configuring". Please find below the entries of exchangesetup.log
[2/1/2015 1:09:30 PM] [0] **********************************************
[2/1/2015 1:09:30 PM] [0] Starting Microsoft Exchange 2007 Setup
[2/1/2015 1:09:30 PM] [0] **********************************************
[2/1/2015 1:09:30 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
[2/1/2015 1:09:30 PM] [0] Setup version: 8.3.83.6.
[2/1/2015 1:09:30 PM] [0] Logged on user: chakfig\Administrator.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[2/1/2015 1:09:30 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
[2/1/2015 1:09:30 PM] [0] Setup is choosing the domain controller to use
[2/1/2015 1:09:31 PM] [0] Setup is choosing a local domain controller...
[2/1/2015 1:09:35 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
[2/1/2015 1:09:35 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
[2/1/2015 1:09:35 PM] [0] Setup is choosing a global catalog...
[2/1/2015 1:09:35 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
[2/1/2015 1:09:35 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
[2/1/2015 1:09:35 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
[2/1/2015 1:09:35 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
[2/1/2015 1:09:35 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 1:09:35 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 1:09:35 PM] [0] The local server has some Exchange files installed.
[2/1/2015 1:09:35 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
[2/1/2015 1:09:35 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] 'BridgeheadRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] 'ClientAccessRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] 'MailboxRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] The server is cluster type: 'None'.
[2/1/2015 1:09:35 PM] [0] The requested cluster type: 'None'.
[2/1/2015 1:09:35 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
[2/1/2015 1:09:35 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
[2/1/2015 1:09:35 PM] [0] Active Directory Initialization status : 'True'.
[2/1/2015 1:09:35 PM] [0] Schema Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] Organization Configuration Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] Domain Configuration Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] The locally installed version is 8.3.83.6.
[2/1/2015 1:09:35 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 1:09:35 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 1:09:35 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
[2/1/2015 1:09:36 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 1:09:36 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 1:09:36 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 1:09:36 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 1:12:38 PM] [0] End of Setup
[2/1/2015 1:12:38 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] Starting Microsoft Exchange 2007 Setup
[2/1/2015 2:17:36 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
[2/1/2015 2:17:36 PM] [0] Setup version: 8.3.83.6.
[2/1/2015 2:17:36 PM] [0] Logged on user: chakfig\Administrator.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[2/1/2015 2:17:37 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
[2/1/2015 2:17:41 PM] [0] Setup is choosing the domain controller to use
[2/1/2015 2:17:41 PM] [0] Setup is choosing a local domain controller...
[2/1/2015 2:17:43 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
[2/1/2015 2:17:43 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
[2/1/2015 2:17:43 PM] [0] Setup is choosing a global catalog...
[2/1/2015 2:17:43 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
[2/1/2015 2:17:43 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:17:43 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
[2/1/2015 2:17:43 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
[2/1/2015 2:17:43 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 2:17:43 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 2:17:43 PM] [0] The local server has some Exchange files installed.
[2/1/2015 2:17:43 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
[2/1/2015 2:17:43 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] 'BridgeheadRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] 'ClientAccessRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] 'MailboxRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] The server is cluster type: 'None'.
[2/1/2015 2:17:43 PM] [0] The requested cluster type: 'None'.
[2/1/2015 2:17:43 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
[2/1/2015 2:17:43 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
[2/1/2015 2:17:43 PM] [0] Active Directory Initialization status : 'True'.
[2/1/2015 2:17:43 PM] [0] Schema Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] Organization Configuration Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] Domain Configuration Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] The locally installed version is 8.3.83.6.
[2/1/2015 2:17:43 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 2:17:43 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 2:17:43 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
[2/1/2015 2:17:43 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 2:17:43 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 2:17:43 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 2:17:43 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 2:17:47 PM] [0] Validating options for the 4 requested roles
[2/1/2015 2:17:47 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
[2/1/2015 2:17:52 PM] [0] Validating options for the 4 requested roles
[2/1/2015 2:17:52 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
[2/1/2015 2:17:53 PM] [0] **************
[2/1/2015 2:17:53 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:17:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.3.83.6' -Roles 'Bridgehead' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server''
[2/1/2015 2:17:53 PM] [1] Beginning processing.
[2/1/2015 2:18:19 PM] [1] Beginning processing.
[2/1/2015 2:18:19 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:18:19 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:19 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [1] Beginning processing.
[2/1/2015 2:18:20 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:18:20 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
[2/1/2015 2:18:20 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:20 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [0] **************
[2/1/2015 2:18:20 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:18:20 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[2/1/2015 2:18:20 PM] [1] Beginning processing.
[2/1/2015 2:18:26 PM] [1] Beginning processing.
[2/1/2015 2:18:26 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:18:55 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
[2/1/2015 2:18:55 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:55 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:55 PM] [1] Ending processing.
[2/1/2015 2:18:55 PM] [1] Ending processing.
[2/1/2015 2:18:55 PM] [0] **************
[2/1/2015 2:18:55 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:18:55 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[2/1/2015 2:18:55 PM] [1] Beginning processing.
[2/1/2015 2:19:01 PM] [1] Beginning processing.
[2/1/2015 2:19:01 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:19:01 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:01 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:19:01 PM] [1] Ending processing.
[2/1/2015 2:19:01 PM] [1] Ending processing.
[2/1/2015 2:19:01 PM] [0] **************
[2/1/2015 2:19:01 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:19:01 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'Mailbox' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[2/1/2015 2:19:01 PM] [1] Beginning processing.
[2/1/2015 2:19:04 PM] [1] Beginning processing.
[2/1/2015 2:19:04 PM] [1] Ending processing.
[2/1/2015 2:19:07 PM] [1] Beginning processing.
[2/1/2015 2:19:07 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:19:07 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:07 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:19:07 PM] [1] Ending processing.
[2/1/2015 2:19:08 PM] [1] Ending processing.
[2/1/2015 2:19:20 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 2:19:20 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 2:19:20 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 2:19:20 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 2:19:20 PM] [0] **************
[2/1/2015 2:19:20 PM] [0] Setup will run the task 'Install-BridgeheadRole'
[2/1/2015 2:19:20 PM] [1] Setup launched task 'Install-BridgeheadRole -DomainController 'PGCDC.chakfig.local' -UpdatesDir 'J:\EXSP01\SP3\Updates''
[2/1/2015 2:19:20 PM] [1] Beginning processing.
[2/1/2015 2:19:20 PM] [1] Attempting Install for BridgeheadRole.
[2/1/2015 2:19:20 PM] [1] The following roles are current:
[2/1/2015 2:19:26 PM] [1] Reading components for role 'BridgeheadRole' from 'res://BridgeheadRoleDefinition.xml'
[2/1/2015 2:19:26 PM] [1] Found 22 components
[2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First - Run Once' with 10 task info blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
[2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First' with 8 task info blocks from 'res://AllRolesCommonFirst.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'All Roles Precompile Management Binaries' with 30 task info blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Bridgehead Permissions Configuration' with 1 task info blocks from 'res://BridgeheadLocalPermissionsComponent.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Common Perf Counters ' with 2 task info blocks from 'res://CommonPerfCountersComponent.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Provision Server' with 9 task info blocks from 'res://ProvisionServerComponent.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'All Active-Directory Roles Common' with 14 task info blocks from 'res://AllADRolesCommon.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 Pseudo-MTA Configuration' with 1 task info blocks from 'res://LegacyMTAComponent.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 SMTP VSI Configuration' with 1 task info blocks from 'res://LegacySMTPComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Perf Counters' with 21 task info blocks from 'res://TransportPerfCountersComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task info blocks from 'res://RpcEpmapFirewallException.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Bridgehead Role Setter' with 1 task info blocks from 'res://BridgeheadRoleSetterComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Common Configuration' with 22 task info blocks from 'res://TransportCommonComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Perf Counters' with 8 task info blocks from 'res://BridgeheadPerfCountersComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Configuration' with 18 task info blocks from 'res://BridgeheadComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Transport Log Search Service' with 1 task info blocks from 'res://TransportLogSearchServiceComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Data Storage Configuration' with 1 task info blocks from 'res://DataStorageComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Monitoring Service Configuration' with 5 task info blocks from 'res://MonitoringComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Active Directory Topology Service Configuration' with 2 task info blocks from 'res://AllADRolesCommonServiceControl.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Bridgehead Service Configuration' with 3 task info blocks from 'res://BridgeheadServiceControl.xml'
[2/1/2015 2:19:32 PM] [1] Loaded component 'Transport Common Service Control' with 1 task info blocks from 'res://TransportCommonServiceControl.xml'
[2/1/2015 2:19:32 PM] [1] Loaded component 'All Roles Common Last' with 4 task info blocks from 'res://AllRolesCommonLast.xml'
[2/1/2015 2:19:32 PM] [1] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 2:19:32 PM] [1] Writing informational script to 'C:\ExchangeSetupLogs\Install-BridgeheadRole-20150201-1419320497.ps1'
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClusterNode = $False', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClusterNode = $False'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsAdminToolsRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsAdminToolsRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleNetBIOSName = "pgcvmexg"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleNetBIOSName = "pgcvmexg"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInvocationID = "20150201-1419320497"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInvocationID = "20150201-1419320497"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleStartTransportService = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleStartTransportService = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggedOnUser = "chakfig\Administrator"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggedOnUser = "chakfig\Administrator"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallationMode = "BuildToBuildUpgrade"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallationMode = "BuildToBuildUpgrade"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RolePreviousVersion = "8.2.176.2"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RolePreviousVersion = "8.2.176.2"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsMailboxRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsMailboxRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleUpdatesDir = "J:\EXSP01\SP3\Updates"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "J:\EXSP01\SP3\Updates"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleDomainController = "PGCDC.chakfig.local"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.chakfig.local"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
[2/1/2015 2:19:32 PM] [1] Found 136 tasks to execute
[2/1/2015 2:19:32 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
[2/1/2015 2:19:32 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
} install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
= 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");'.
[2/1/2015 2:19:32 PM] [2] Beginning processing.
[2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/1/2015 2:19:33 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/1/2015 2:19:33 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
= False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:35 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
[2/1/2015 2:19:35 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
[2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
[2/1/2015 2:19:35 PM] [1] Executing 'Set-LocalPermissions', handleError = False
[2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
[2/1/2015 2:19:35 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
handleError = True
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
-MofFilePath:$mflFilePath;'.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
[2/1/2015 2:19:49 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
[2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
All compilation targets are up to date.
[2/1/2015 2:19:50 PM] [2] Process standard error:
[2/1/2015 2:19:50 PM] [2] Ending processing.
[2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:50 PM] [2] Beginning processing.
[2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
[2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
All compilation targets are up to date.
[2/1/2015 2:19:50 PM] [2] Process standard error:
[2/1/2015 2:19:50 PM] [2] Ending processing.
[2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:50 PM] [2] Beginning processing.
[2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
[2/1/2015 2:19:51 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
All compilation targets are up to date.
[2/1/2015 2:19:51 PM] [2] Process standard error:
[2/1/2015 2:19:51 PM] [2] Ending processing
[2/1/2015 2:20:07 PM] [2] Process standard error:
[2/1/2015 2:20:07 PM] [2] Ending processing.
[2/1/2015 2:20:07 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:20:07 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:20:07 PM] [2] Beginning processing.
[2/1/2015 2:20:07 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll" /verbose
[2/1/2015 2:20:10 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll
All compilation targets are up to date.
[2/1/2015 2:20:10 PM] [2] Process standard error:
[2/1/2015 2:20:10 PM] [2] Ending processing.
[2/1/2015 2:20:10 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:20:10 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:20:10 PM] [2] Beginning processing.
[2/1/2015 2:20:10 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll" /verbose
[2/1/2015 2:20:12 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll
All compilation targets are up to date.
[2/1/2015 2:20:12 PM] [2] Process standard error:
[2/1/2015 2:20:12 PM] [2] Ending processing.
[2/1/2015 2:20:12 PM] [1] Processing component 'Bridgehead Permissions Configuration' (Setting folder and registry permissions).
[2/1/2015 2:20:12 PM] [1] Executing 'Set-LocalPermissions -Feature:"Bridgehead"', handleError = False
[2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead"'.
[2/1/2015 2:20:12 PM] [2] Beginning processing.
[2/1/2015 2:20:12 PM] [2] Ending processing.
[2/1/2015 2:20:12 PM] [1] Processing component 'Common Perf Counters ' (Configuring performance counters).
[2/1/2015 2:20:12 PM] [1] Executing 'new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml', handleError = True
[2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml'.
[2/1/2015 2:20:12 PM] [2] Beginning processing.
[2/1/2015 2:20:12 PM] [2] Processing file: C:\Program Files\Microsoft\Exchange Server\Setup\Perf\ExchangeTopologyPerformanceCounters.xml
[2/1/2015 2:20:12 PM] [2] Performance counter name is Latest Exchange Topology Discovery Time in Seconds, type is NumberOfItems32.
[2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Exchange Topology Discoveries, type is NumberOfItems32.
[2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Siteless Servers, type is NumberOfItems32.
Appreciate if someone can help us move forward in this scenario.
We have
1. disabled anti virus and tried.
2. removed watermarks and action entries in the registry
3. tried almost everything mentioned on google but i am not able to move forward.
Please help. we need this as part of our migration to Exchange 2013 for co-existence.
Thank you.
PhilipExchangeSetup.log (part 3)
[2/2/2015 8:06:45 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleUpdatesDir = "C:\SP3\Updates"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "C:\SP3\Updates"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleDomainController = "PGCDC.platcorp.local"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.platcorp.local"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
[2/2/2015 8:06:45 PM] [1] Found 136 tasks to execute
[2/2/2015 8:06:45 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
[2/2/2015 8:06:45 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
} install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
= 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");'.
[2/2/2015 8:06:45 PM] [2] Beginning processing.
[2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/2/2015 8:06:45 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/2/2015 8:06:45 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
= False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
[2/2/2015 8:06:47 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-LocalPermissions', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:07:00 PM] [2] Ending processing.
[2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
[2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
[2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
[2/2/2015 8:07:00 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
handleError = True
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
-MofFilePath:$mflFilePath;'.
[2/2/2015 8:07:00 PM] [2] Beginning processing.
[2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
[2/2/2015 8:07:01 PM] [2] Ending processing.
[2/2/2015 8:07:01 PM] [2] Beginning processing.
[2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
[2/2/2015 8:07:01 PM] [2] Ending processing.
[2/2/2015 8:07:01 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
[2/2/2015 8:07:01 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:01 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:01 PM] [2] Beginning processing.
[2/2/2015 8:07:01 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
[2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
All compilation targets are up to date.
[2/2/2015 8:07:02 PM] [2] Process standard error:
[2/2/2015 8:07:02 PM] [2] Ending processing.
[2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:02 PM] [2] Beginning processing.
[2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
[2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
All compilation targets are up to date.
[2/2/2015 8:07:02 PM] [2] Process standard error:
[2/2/2015 8:07:02 PM] [2] Ending processing.
[2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:02 PM] [2] Beginning processing.
[2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
[2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
All compilation targets are up to date.
[2/2/2015 8:07:02 PM] [2] Process standard error:
[2/2/2015 8:07:02 PM] [2] Ending processing.
[2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:02 PM] [2] Beginning processing.
[2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll" /verbose
[2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll
All compilation targets are up to date.
[2/2/2015 8:07:03 PM] [2] Process standard error:
[2/2/2015 8:07:03 PM] [2] Ending processing.
[2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:03 PM] [2] Beginning processing.
[2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll" /verbose
[2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll
All compilation targets are up to date.
[2/2/2015 8:07:03 PM] [2] Process standard error:
[2/2/2015 8:07:03 PM] [2] Ending processing.
[2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:03 PM] [2] Beginning processing.
[2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll" /verbose
[2/2/2015 8:07:04 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll
All compilation targets are up to date. -
Instaling forefront exchange 2007 SP2 in exchagne 2007
Hi ,
We have two exchange 2007 SP3 exchange server 1)cas and hub and 2)mail box server.
currently we configured cisco iron port as a send and recieve connector , all the mails are first come to iron ports .
there we enabled anti spam policies, but unfortunately cisco iron port license got expired , due to this we getting lot of spam mails .
now im planning to install Forefront security 2007 in both the server .
1)if configure FFS it will affect our mail flow settings ?
2)after configure FFS we have change the connector settings?
Regards,
Velu M
Regards, Velu MHi,
As far as I know, Forefront help us keep viruses out of our Exchange server. And it has no influence on the mail flow settings and the connector settings.
We can use Antispam filtering on Forefront to avoid spam emails. For more information about Forefront Protection 2010 for Exchange Server spam filtering, you can refer to the following article:
http://blogs.technet.com/b/fss/archive/2010/07/20/forefront-protection-2010-for-exchange-server-spam-filtering-filtering-and-powershell-videos-available.aspx
Additionally, you are welcomed to confirm it on our Forefront forum:
http://social.technet.microsoft.com/Forums/forefront/en-US/home?category=forefront
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support -
Cannot send email from Exchange 2007 to Exchange 2013 - Coexistence
Existing Exchange 2007 SP3 1 MBX, 2 CAS/HT, 2 ET servers.
I have added an Exchange 2013 server with MBX/CAS role.
Email will flow from Ex2013 server no problem. Mail from Ex2007 systems cannot deliver to Ex2013 boxes, it dies in queue with a 4.4.7 expired message after issuing a delay message.
I can telnet to ports 25, 587,717,465,475, and 2525 from Ex2007 HT role to new Exchange 2013 server. I can send email from Ex2007 HT role server to new Exchange 2013 server using telnet to port 25.
A ‘get-mailbox’ from the Ex2007 HT role server returns the server and database properly on the test users on Exchange 2013 server.
The only strange thing I am seeing is from the Ex2007 systems, a ‘get-exchange server’ command shows the new Ex2013 server as role ‘16439’ which looks to perhaps be normal.
Why is email not flowing to the new users on Exchange 2013?You should have exchange server authentication ticked in Default Receive connector in Exchange2007.
Exchange 2007 and Exchange 2013 in the same subnet/network. if not please check any spam agent running between the networks. Are you running antispam on Exchange2013 ?
MAS -
Issue moving remote user from exchange 2007 to 2013
have moved over 60 people so far from exchange 2007 to 2013, it was going well with no major problems.
during migration I have created a DNS setting called legacy.mydomain.com, and it points to the old exchange server, while mail.mydomain.com points to the new exchange server.
outlook was working connecting to both servers, and OWA was working on both servers.
couple of remote users who connect via SSL-VPN and outlook 2010 had issues connecting, but as soon as I moved them to 2013 exchange they connected without vpn using outlook anywhere.
but - I have one remote user who even though the mailbox move to the new 2013 server was successful, their outlook still points to the 2007 exchange server.
if I try creating a new profile in outlook 2013, it fails because it cannot contact exchange server, even when ssl-vpn is running.
when I started troubleshooting I found lots of spyware on his laptop, symantec had been blocking some trojans, obviously he had downloaded something he shouldnt have.
could this have caused my outlook connectivity issue?
I ran malawarebytes, and it shows clean now, but still unable to get his outlook to connect.
I had thought about moving his mailbox back to the old server, seeing if it works on outlook, then moving it to the new one again.
any suggestions?I had thought about moving his mailbox back to the old server, seeing if it works on outlook, then moving it to the new one again.
Hi,
Have you done this step? Sometimes moving mailbox to another database can auto-fix problems.
According to your description, I know that all migrated mailboxes work well except a specific user. I notice that the user's laptop has a lots of spyware, and symantec has been clocking some trojans.
Please try to logon OWA to check whether this user works.
If works in OWA, it seems that the mailbox has been migrated to 2013 successfully.
Generally, re-creating profile can fix this issue. Unfortunately, you have tried it and failed.
Please try to run Outlook under safe mode to avoid AVs and add-ins.
Thanks
Mavis Huang
TechNet Community Support -
Hello, everyone, my name is rafl
I have a problem with exchange 2013 active sync.
I have installed exchange 2013 coexistence with legacy exchange 2007, I have to migrate user mailboxes: [email protected] from exchange 2007 to exchange 2013.
but any problem with active sync connection on the mobile device after moving mailbox user. I reconfigure the exchange ActiveSync external connection domain (latest.domain.com) on mobile device replacing legacy exchange ActiveSync external connection domain
(legacy.domain.com)
the process of moving mailboxes successfully without error.
Access OWA for exchange 2007 and exchange 2013 is running normally
access mail from Outlook running normally
Certificate request has been installed and has no problem with it
The OWA virtual directory is configured for internal and external connections and different from the legacy exchange
The autodiscover virtual directory is configured for internal and external connections and different from the legacy exchange
ActiveSync virtual directory is configured for internal and external connections and different from the legacy exchange
user mailboxes are still on exchange 2007 is not problematic.
only problem with Exchange Active Sync on mobile devices, where I set up an email with android, iphone, windows phone. the error message: cannot connect to the server.
but, if I create a new user and create user mailboxes directly in exchange server 2013, ActiveSync can run without error on mobile device, access through OWA, MsOutlook, Outlook Anywhere also run normally.
only the results of user migration from exchange 2007 to exchange 2013 which is troubled with exchange ActiveSync connection.
any ideas for this problem, and what should I check on the exchange server ..?i have run the activesync test connectivity and get some error :
Testing TCP port 443 on host domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 3091 ms.
Testing TCP port 443 on host autodiscover.domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 21072 ms.
Testing TCP port 80 on host autodiscover.domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 21049 ms.
I have allowed access to port 443 (https) and 80 (http) on the firewall and re-run testconnectivity, but still with the same results. if I enable active sync for users who created directly in Exch 2013 there is no problem with the ActiveSync, just a problem
for users who moved from Exch 2007 to Exch 2013. @Android, iPhone, and Blackberry the error message "cannot connect to the server" -
Outlook can't connect with Exchange 2013 after migration from Exchange 2007
<style type="text/css">P { margin-bottom: 0.21cm; }</style>
Hello,
recently we've done a Exchange 2007 sp3 to 2013 sp1. Users can conect perfectly with OWA and with his iphone clients.
But the problem is they can't connect from his Outlook clients (2010, 2013), both internaly and externaly. Always fails with the message: The Connection to Exchange it is not avaliable.... Can't resolve the name of Exchange server.
To try to resolve it we've done:
- Check Outlook anywhere configuration en EAC: it is configure with and external url mail.company.com and internal server.domain.local. The security is the default Negociation, but we've tried all.
- Check the internal dns, there are records for mail.company.com and exchangeserverdomain.local pointing to the exchange local ip. Also there is a public zone company.com with the record mail.caompany.com pointing to the exchange local ip. Also we've made
records autodiscover.company.com and autodiscover.domain.local pointing to the exchange local ip.
- In the public dns from our domain there is the record A and MX pointing our public ip. There aren't any record Autodiscover but we think that the manial conection should work.
Check certificates: we've made a new self-signed certificate including all this internal and external domains and for all services.
- Check Outlook Anywhere block: we've cheked.
Currently server state:
- Old Exchange 07 server can't start, it was in very bad state and we achieved migrate the mailbox to the new server, after that we tried to uninstall, but it crashes with a public folder replication error. We got uninstall all the roles
unless the mailbox. After a restart it can't start.
-The new Exchange 2013 looks great, there isn't any trail of the old server, or we haven't seen anything in the EAC or shell.
I paste below the result of Microsoft Remote conectivity analaizer, with Outlook anywhere test. It is clear that there is a problem with that.
Sorry because the test is in spanish and I translated it with google, from here I only can access the tool in spanish.
We continue to try to resolve the problem.
Thanks to all in advance!
Testing RPC / HTTP connectivity.
Error in testing RPC / HTTP.
additional Details
Elapsed time: 24295 ms.
Test steps
Connectivity Analyzer Microsoft is trying to test Autodiscover for [email protected] .
Error in automatic detection test .
additional Details
Elapsed time: 24294 ms.
Test steps
Attempting each method of contacting the Autodiscover service .
Failed to properly contact the Autodiscover service using all methods.
additional Details
Elapsed time: 24294 ms.
Test steps
Trying to prove possible Autodiscover URL https://empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 1509 ms.
Test steps
Attempting to resolve the host name in DNS empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 80.36.252.194
Elapsed time: 507 ms.
Testing TCP port 443 on the host to ensure empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 464 ms.
Testing the SSL certificate to make sure it is valid.
The SSL certificate is not exceeded one or more certificate validation checks .
additional Details
Elapsed time: 537 ms.
Test steps
Connectivity Analyzer Microsoft is attempting to obtain the SSL certificate from remote server on port 443 empresa.com .
Connectivity Analyzer Microsoft successfully obtained the remote SSL certificate.
additional Details
Remote Certificate Subject : CN = mail.empresa.com , issuer : CN = mail.empresa.com .
Elapsed time: 454 ms.
Validating the certificate name .
The certificate name was validated successfully .
additional Details
Hostname empresa.com was found at the entrance of the alternative subject name of the certificate.
Elapsed time: 1 ms.
Is validating the trusted certificate .
Validation Error trusted certificate.
Test steps
Connectivity Analyzer Microsoft is trying to build certificate chains for certificate CN = mail.empresa.com .
Could not build a certificate chain for the certificate.
Tell me more about this issue and how to resolve
additional Details
The certificate chain did not end in a trusted root . Root = CN = mail.empresa.com
Elapsed time: 31 ms.
Trying to prove possible Autodiscover URL https://autodiscover.empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 21723 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 498 ms.
Testing TCP port 443 on the host to ensure autodiscover.empresa.com listening or is open.
The specified port is blocked , not listening or does not generate the expected response .
Tell me more about this issue and how to resolve
additional Details
Network Error communicating with the remote host.
Elapsed time: 21224 ms.
Attempting to contact the Autodiscover service with the HTTP redirect method .
Error when trying to contact the Autodiscover HTTP redirect method .
additional Details
Elapsed time: 606 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 14 ms .
Testing TCP port 80 on the host to ensure autodiscover.empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 202 ms.
Connectivity Analyzer Microsoft is checking the automatic detection of host empresa.com for an HTTP redirect to the Autodiscover service.
Connectivity Analyzer Microsoft could not get a HTTP redirect response for Autodiscover .
additional Details
Web exception occurred because an HTTP 404 response was received - Unknown NotFound . Headers received: Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27:58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 +
lenny3 with Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3 HTTP Response Headers : Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27: 58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 + lenny3 with
Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3
Elapsed time: 388 ms.
Attempting to contact the Autodiscover service using the method of DNS SRV redirect server.
Connectivity Analyzer Microsoft could not contact the Autodiscover service using the DNS SRV redirect method .
additional Details
Elapsed time: 186 ms.
Test steps
Trying to find the SRV record in DNS _autodiscover._tcp.empresa.com .
Not the Autodiscover SRV record in DNS found .
Tell me more about this issue and how to resolve
additional Details
Elapsed time: 186 ms.
Checking for a CNAME record for Autodiscover in DNS for your domain " empresa.com " to Office 365.
Could not validate the Autodiscover CNAME record in DNS. If your mailbox is not in Office 365 , you can ignore this warning.
Tell me more about this issue and how to resolve
additional Details
No Autodiscover CNAME record for your domain ' empresa.com ' .
Elapsed time: 268 ms.
jsptHello,
We have the Self-signed certificate that comes with Exchange, and we've created a new self-signed including all our domains mail.company.com, domain.local, exchange13.domain.local, autodiscover.company.com, autodiscover.domain.local.
below I print you the result os the comand Get-ClientAccesServer | fl . Now we've configured a SPC objetct folow the instructions of Wizard
Exchange Server Deployment from Microsoft. We've executed the commands in our new Exchange 13, but can't did it in the old Exchange:
$AutodiscoverHostName = "autodiscover.contoso.com"Get-ExchangeServer | Where {($_.AdminDisplayVersion -Like "Version 8*") -And ($_.ServerRole -Like "*ClientAccess*")} | Set-ClientAccessServer -AutoDiscoverServiceInternalUri https://$AutodiscoverHostName/Autodiscover/Autodiscover.xmlThis is the result of
RunspaceId : 89c86f8e-d156-4480-b31d-59215976879b
Name : EXCHANGE13
Fqdn : EXCHANGE13.domain.local
ClientAccessArray :
OutlookAnywhereEnabled : True
AutoDiscoverServiceCN : EXCHANGE13
AutoDiscoverServiceClassName : ms-Exchange-AutoDiscover-Service
AutoDiscoverServiceInternalUri : https://autodiscover.company.com/Autodiscover/Autodiscover.xml
AutoDiscoverServiceGuid : 77378f46-2c66-4aa9-a6a6-3e7a48b19596
AutoDiscoverSiteScope : {Nombre-predeterminado-primer-sitio}
AlternateServiceAccountConfiguration :
IsOutOfService : False
WorkloadManagementPolicy : DefaultWorkloadManagementPolicy_15.0.825.0
Identity : EXCHANGE13
IsValid : True
ExchangeVersion : 0.1 (8.0.535.0)
DistinguishedName : CN=EXCHANGE13,CN=Servers,CN=Exchange Administrative Group
(FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=local
Guid : e83055fe-217b-4ed6-9cd0-7711097baf99
ObjectCategory : domain.local/Configuration/Schema/ms-Exch-Exchange-Server
ObjectClass : {top, server, msExchExchangeServer}
WhenChanged : 09/03/2014 12:46:07
WhenCreated : 08/03/2014 19:15:54
WhenChangedUTC : 09/03/2014 11:46:07
WhenCreatedUTC : 08/03/2014 18:15:54
OrganizationId :
OriginatingServer : severdc.domain.local
ObjectState : Unchanged
I hope this stuff can help you.
Thanks!!
jspt -
ICal bug: cannot copy/paste into location field of exchange 2007 calendar
when you copy text from any application (cmd C) and then try to paste it into de location field of a new or existing appointment of a calendar synchronizing with an exchange 2007 account in iCal 4.0, then .... well nothing happens. You can paste it in a subject or a notes field but not in de location field.
My experience as well (hooked into google calendar), and a frustrating one. I assume this is related in some way to the "yellow exclamation point in edit mode - can only select entire block"? I see that normal "on my mac" calendar locations don't have the yellow exclamation point, and I can select any portion of the text. What's up with this? Is iCal suggesting that google's "Where" field is incompatible somehow? Yet there seems to be no trouble exchanging data between the two...
Message was edited by: johnshifflett -
Exchange 2013 MB/CAS integration with legacy Exchange 2007 CAS/MB/Trans server
Hi All,
I have an existing running Exchange 2007 SP3 RU13 server acting as MB,CAS,Transport using a Barracuda SPAM for SMTP (MX Record is assigned to here), and a TMG2010 server performing all ActiveSync, Outlook Anywhere, and OWA connectivity.
I have built a new Exchange 2013 SP1 server that will (for the meantime) act as a MB & CAS server only.
I successfully migrated a testuser mailbox to the new EX2013 server from the EX2007 server. The problem is that once migrated, OWA and Outlook can't access the mailbox.
OWA form our URL gives the message: Outlook Web Access is currently unavailable. If the problem continues, contact technical support for your organization and tell them the following: No Client Access servers of the appropriate version can be accessed from
the Internet
If I run OWA from the EX2013 URL it works ok, but not for MBs on the EX2007 server.
I tested this configuration in a VM lab and it worked ok. All I had to do was move the mailbox, then run Outlook. Outlook automatically found the new server and opened the MB.
Basically what I need to do is move all our existing MBs from the old 2007 server to the new 2013 server. I want to continue to use the exisiting transport/CAS/EDGE services on 2007 without having to rebuild both the internal and external comunications
infrastructure at the present time.
How can I get the EX2013 server to act as the MB server for the EX2007 communications infrastructure?Hi,
Please try to create a new user on Exchange 2013, and send/receive email via both Outlook and OWA to test whether the Exchange 2013 mail flow well.
If Exchange 2013 works well, please try to bypass the TMG on Exchange 2007 for a little while for testing.
Additionally, we can use CAS 2013 URL to proxy/redirect previous CAS, or publish both CAS 2007 and CAS 2013 to be internet facing server with separate URLs, as Ed suggested.
Thanks
Mavis Huang
TechNet Community Support -
Health Check in Exchange 2007 Scripting
Hi All,
I have been looking around for scripts which would help me perform regularised health checks in my enviornment. After lot of googling i was able to get a script which would meet my requirements. However i have a few challenges involved in extracting some
more information:
1. Mailbox Store Size, Free Diskspace percentage for mailbox servers
2. Remote Mail flow Tests & Mailflow test to every exchange 2007 mailbox servers in org.
3. Automating Email of collected data (in HTML) to Administrator.
4. Executing the script Automatically without triggering it from Exchange Management Shell.
Script Below
param( [string] $auditlist)
Function Get-CustomHTML ($Header){
$Report = @"
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd">
<html><head><title>$($Header)</title>
<META http-equiv=Content-Type content='text/html; charset=windows-1252'>
<meta name="save" content="history">
<style type="text/css">
DIV .expando {DISPLAY: block; FONT-WEIGHT: normal; FONT-SIZE: 8pt; RIGHT: 8px; COLOR: #ffffff; FONT-FAMILY: Arial; POSITION: absolute; TEXT-DECORATION: underline}
TABLE {TABLE-LAYOUT: fixed; FONT-SIZE: 100%; WIDTH: 100%}
*{margin:0}
.dspcont { display:none; BORDER-RIGHT: #B1BABF 1px solid; BORDER-TOP: #B1BABF 1px solid; PADDING-LEFT: 16px; FONT-SIZE: 8pt;MARGIN-BOTTOM: -1px; PADDING-BOTTOM: 5px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; WIDTH: 95%; COLOR: #000000; MARGIN-RIGHT:
0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; BACKGROUND-COLOR: #f9f9f9}
.filler {BORDER-RIGHT: medium none; BORDER-TOP: medium none; DISPLAY: block; BACKGROUND: none transparent scroll repeat 0% 0%; MARGIN-BOTTOM: -1px; FONT: 100%/8px Tahoma; MARGIN-LEFT: 43px; BORDER-LEFT: medium none; COLOR: #ffffff; MARGIN-RIGHT: 0px; PADDING-TOP:
4px; BORDER-BOTTOM: medium none; POSITION: relative}
.save{behavior:url(#default#savehistory);}
.dspcont1{ display:none}
a.dsphead0 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#FFFFFF; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #CC0000}
a.dsphead1 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#ffffff; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #7BA7C7}
a.dsphead2 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#ffffff; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #7BA7C7}
a.dsphead1 span.dspchar{font-family:monospace;font-weight:normal;}
td {VERTICAL-ALIGN: TOP; FONT-FAMILY: Tahoma}
th {VERTICAL-ALIGN: TOP; COLOR: #CC0000; TEXT-ALIGN: left}
BODY {margin-left: 4pt}
BODY {margin-right: 4pt}
BODY {margin-top: 6pt}
</style>
<script type="text/javascript">
function dsp(loc){
if(document.getElementById){
var foc=loc.firstChild;
foc=loc.firstChild.innerHTML?
loc.firstChild:
loc.firstChild.nextSibling;
foc.innerHTML=foc.innerHTML=='hide'?'show':'hide';
foc=loc.parentNode.nextSibling.style?
loc.parentNode.nextSibling:
loc.parentNode.nextSibling.nextSibling;
foc.style.display=foc.style.display=='block'?'none':'block';}}
if(!document.getElementById)
document.write('<style type="text/css">\n'+'.dspcont{display:block;}\n'+ '</style>');
</script>
</head>
<body>
<b><font face="Arial" size="5">$($Header)</font></b><hr size="8" color="#CC0000">
<font face="Arial" size="1"><b>Version 1 |M & C | <A HREF='http://mail.exchange.com'>mail.exchange.com</A></b></font><br>
<font face="Arial" size="1">Report created on $(Get-Date)</font>
<div class="filler"></div>
<div class="filler"></div>
<div class="filler"></div>
<div class="save">
Return $Report
Function Get-CustomHeader0 ($Title){
$Report = @"
<div class="dspcont0">
<h1><a href="javascript:void(0)" class="dsphead0" onclick="dsp(this)">
<span class="expando">show</span>$($Title)</a></h1>
<div class="dspcont0">
Return $Report
Function Get-CustomHeader ($Num, $Title){
$Report = @"
<h2><a href="javascript:void(0)" class="dsphead$($Num)" onclick="dsp(this)">
<span class="expando">show</span>$($Title)</a></h2>
<div class="dspcont">
Return $Report
Function Get-CustomHeaderClose{
$Report = @"
</DIV>
<div class="filler"></div>
Return $Report
Function Get-CustomHeader0Close{
$Report = @"
</DIV>
<div class="filler"></div>
Return $Report
Function Get-CustomHTMLClose{
$Report = @"
</div>
</body>
</html>
Return $Report
Function Get-HTMLTable{
param([array]$Content)
$HTMLTable = $Content | ConvertTo-Html
$HTMLTable = $HTMLTable -replace '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">', ""
$HTMLTable = $HTMLTable -replace '<html xmlns="http://www.w3.org/1999/xhtml">', ""
$HTMLTable = $HTMLTable -replace '<head>', ""
$HTMLTable = $HTMLTable -replace '<title>HTML TABLE</title>', ""
$HTMLTable = $HTMLTable -replace '<', "<"
$HTMLTable = $HTMLTable -replace '>', ">"
$HTMLTable = $HTMLTable -replace '</head><body>', ""
$HTMLTable = $HTMLTable -replace '</body></html>', ""
Return $HTMLTable
Function Get-HTMLLink ($activeURL){
$Report = @"
<a href=$activeURL>$activeURL</a>
Return $Report
Function Get-Ink ([String]$inData){
[String]$inclPercentage = @(35..100)
$positive = ($inclPercentage, 'Success', 'Ready', 'Running', 'OK', 'True', 'Information')
If ($positive -match $inData)
$Report = @"
<font color='#009900'>$inData</font>
Else
$Report = @"
<font color='#FF0000'>$inData</font>
Return $Report
Function Get-HTMLBasic ($Detail){
$Report = @"
<TABLE>
<tr>
<td width='75%'>$($Detail)</td>
</tr>
</TABLE>
Return $Report
Function Get-HTMLDetail ($Heading, $Detail){
$Report = @"
<TABLE>
<tr>
<th width='25%'><b>$Heading</b></font></th>
<td width='75%'>$($Detail)</td>
</tr>
</TABLE>
Return $Report
$input | foreach {$targets += @($_)}
If ((Test-Path variable:\targets) -eq $True){
Write-Host "Server list input detected on pipeline" -ForegroundColor Yellow
Else{
if ($auditlist -eq ""){
Write-Host "No server list specified, getting all Exchange 2007 servers" -ForegroundColor Yellow
$targets = Get-ExchangeServer | Where-Object {$_.IsExchange2007OrLater -eq $True}
else
if ((Test-Path $auditlist) -eq $false)
Write-Host "Invalid server list specified: $auditlist" -ForegroundColor DarkRed
exit
else
Write-Host "Using Audit list: $auditlist" -ForegroundColor Cyan
$Targets = Get-Content $auditlist
$now = Get-Date
#Custom Expressions
$latencyMS = @{Name="Latency(MS)";expression={[Math]::Round(([TimeSpan] $_.Latency).TotalMilliSeconds)}}
$MessageLatencyTime = @{Name="MessageLatencyTime";expression={[Math]::Round(([TimeSpan] $_.Latency).TotalMilliSeconds)}}
$hotLink = @{Name="URL";expression={Get-HTMLLink ($_.URL)}}
$colourResult = @{Name="Result";expression={Get-Ink ($_.Result)}}
$colourStatus = @{Name="Status";expression={Get-Ink ($_.Status)}}
$colourType = @{Name="Status";expression={Get-Ink ($_.Type)}}
$newResult = @{Name="Result";expression={If ($_.Result.ToString() -ne 'Success'){Get-Ink ('Failure')} Else {Get-Ink ('Success') }}}
$fullReport = Get-CustomHTML "Exchange 2007 "
$fullReport += Get-CustomHTMLClose
Foreach ($Target in $Targets){
Write-Host "Collating Detail for $Target" -ForegroundColor Yellow
Write-Host "..getting basic computer configuration"
$ComputerSystem = Get-WmiObject -computername $Target Win32_ComputerSystem
switch ($ComputerSystem.DomainRole){
0 { $ComputerRole = "Standalone Workstation" }
1 { $ComputerRole = "Member Workstation" }
2 { $ComputerRole = "Standalone Server" }
3 { $ComputerRole = "Member Server" }
4 { $ComputerRole = "Domain Controller" }
5 { $ComputerRole = "Domain Controller" }
default { $ComputerRole = "Information not available" }
$OperatingSystems = Get-WmiObject -computername $Target Win32_OperatingSystem
$TimeZone = Get-WmiObject -computername $Target Win32_Timezone
$Keyboards = Get-WmiObject -computername $Target Win32_Keyboard
$SchedTasks = Get-WmiObject -computername $Target Win32_ScheduledJob
$BootINI = $OperatingSystems.SystemDrive + "boot.ini"
$RecoveryOptions = Get-WmiObject -computername $Target Win32_OSRecoveryConfiguration
$exServer = Get-ExchangeServer | where {$_.Name -eq "$Target"}
$exVersion = "Version " + $exServer.AdminDisplayVersion.Major + "." + $exServer.AdminDisplayVersion.Minor + " (Build " + $exServer.AdminDisplayVersion.Build + "." + $exServer.AdminDisplayVersion.Revision + ")"
switch ($ComputerRole){
"Member Workstation" { $CompType = "Computer Domain"; break }
"Domain Controller" { $CompType = "Computer Domain"; break }
"Member Server" { $CompType = "Computer Domain"; break }
default { $CompType = "Computer Workgroup"; break }
$LBTime=$OperatingSystems.ConvertToDateTime($OperatingSystems.Lastbootuptime)
$MyReport += Get-CustomHeader0 "$Target - Role(s): $($exServer.ServerRole)"
$MyReport += Get-CustomHeader "2" "Basic Server Information"
$MyReport += Get-HTMLDetail "Computer Name" ($ComputerSystem.Name)
$MyReport += Get-HTMLDetail "Computer Role" ($ComputerRole)
$MyReport += Get-HTMLDetail "Exchange Role(s)" ($exServer.ServerRole)
$MyReport += Get-HTMLDetail "Last System Boot" ($LBTime)
$MyReport += Get-CustomHeaderClose
Write-Host "..getting logical disk configuration"
$Disks = Get-WmiObject -ComputerName $Target Win32_LogicalDisk
$MyReport += Get-CustomHeader "2" "Logical Disk Configuration"
$LogicalDrives = @()
Foreach ($LDrive in ($Disks | Where {$_.DriveType -eq 3})){
$Details = "" | Select "Drive Letter", Label, "File System", "Disk Size (GB)", "Disk Free Space", "% Free Space"
$Details."Drive Letter" = $LDrive.DeviceID
$Details.Label = $LDrive.VolumeName
$Details."File System" = $LDrive.FileSystem
$Details."Disk Size (GB)" = [math]::round(($LDrive.size / 1GB))
$Details."Disk Free Space" = [math]::round(($LDrive.FreeSpace / 1GB))
$Details."% Free Space" = Get-Ink ([Math]::Round(($LDrive.FreeSpace /1GB) / ($LDrive.Size / 1GB) * 100))
$LogicalDrives += $Details
$MyReport += Get-HTMLTable ($LogicalDrives)
$MyReport += Get-CustomHeaderClose
if ($exServer.ServerRole -like "*ClientAccess*")
{$MyReport += Get-CustomHeader "2" "OWA Connectivity"
Write-Host "..performing OWA connectivity test"
$colOWAResults = Test-OwaConnectivity -ClientAccessServer $Target
$MyReport += Get-HTMLTable ($colOWAResults | select MailboxServer, $hotLink, Scenario, $colourResult, $latencyMS, Error)
$MyReport += Get-CustomHeaderClose
Write-Host "..getting queue details"
if ($exServer.ServerRole -like "*HubTransport*")
$MyReport += Get-CustomHeader "2" "Queue Information"
$colQs = Get-Queue -server $Target
$MyReport += Get-HTMLTable ($colQs | Select-Object NextHopDomain, $colourStatus, MessageCount, NextRetryTime)
$MyReport += Get-CustomHeaderClose
Write-Host "..getting mailbox database information"
$spaceLog=[System.Diagnostics.EventLog]::GetEventLogs($target) | where {($_.LogDisplayName -eq "Application")}
$db = @{Name="database";Expression={$_.ReplacementStrings[1]}}
$freeMB = @{Name="MB";Expression={[int]$_.ReplacementStrings[0]}}
$whiteSpace = $spaceLog.entries | where {($_.TimeWritten -ge $now.AddDays(-1))} | where {($_.EventID -eq "1221")} | select $db,$freeMB
$ws = @{Name="White Space";expression={}}
if ($exServer.ServerRole -like "*Mailbox*")
$MyReport += Get-CustomHeader "2" "Mailbox Stores"
$colMailboxStores = Get-MailboxDatabase -Server $Target -Status | Sort-Object Name
$storeTable = @()
Foreach ($objMailboxStore in $colMailboxStores)
[string]$totalUsers = (get-mailbox -database $objMailboxStore).count
[string]$empty = $totalUsers.Length -eq 0
if ($empty -eq 'True')
[string]$totalUsers = "0"
$storeDetails = "" | Select Name, Mounted, "Total Users", "White Space", LastFullBackup
$storeDetails.Name = $objMailboxStore.Name
$storeDetails.Mounted = Get-Ink ($objMailboxStore.Mounted)
$storeDetails."Total Users" = $totalUsers
$storeDetails."White Space" = (($whitespace | where {$_.database -match $objMailboxStore.Name} | select -last 1).mb)
$storeDetails.LastFullBackup = $objMailboxStore.LastFullBackup
$storeTable += $storeDetails
$MyReport += Get-HTMLTable ($storeTable)
$MyReport += Get-CustomHeaderClose
$MyReport += Get-CustomHeader "2" "MAPI Connectivity"
Write-Host "..performing MAPI connectivity test"
$colMAPIResults = Test-MAPIConnectivity -Server $Target
$MyReport += Get-HTMLTable ($colMAPIResults | select Database, $newResult, $latencyMS, Error)
$MyReport += Get-CustomHeaderClose
$MyReport += Get-CustomHeader "2" "Mailflow Test"
Write-Host "..performing Mailflow test"
$colMailflowResults = Test-Mailflow -Server $Target
$MyReport += Get-HTMLTable ($colMailflowResults | select TestMailflowResult, $MessageLatencyTime)
$MyReport += Get-CustomHeaderClose
Write-Host "..getting Exchange services"
$ListOfServices = (gwmi -computer $Target -query "select * from win32_service where Name like 'MSExchange%' or Name like 'IIS%' or Name like 'SMTP%' or Name like 'POP%' or Name like 'W3SVC%'")
$MyReport += Get-CustomHeader "2" "Exchange Services"
$Services = @()
Foreach ($Service in $ListOfServices){
$Details = "" | Select Name,Account,"Start Mode",State,"Expected State"
$Details.Name = $Service.Caption
$Details.Account = $Service.Startname
$Details."Start Mode" = $Service.StartMode
If ($Service.StartMode -eq "Auto")
if ($Service.State -eq "Stopped")
$Details.State = $Service.State
$Details."Expected State" = Get-Ink ("Unexpected")
If ($Service.StartMode -eq "Auto")
if ($Service.State -eq "Running")
$Details.State = $Service.State
$Details."Expected State" = Get-Ink ("OK")
If ($Service.StartMode -eq "Disabled")
If ($Service.State -eq "Running")
$Details.State = $Service.State
$Details."Expected State" = Get-Ink ("Unexpected")
If ($Service.StartMode -eq "Disabled")
if ($Service.State -eq "Stopped")
$Details.State = $Service.State
$Details."Expected State" = Get-Ink ("OK")
If ($Service.StartMode -eq "Manual")
$Details.State = $Service.State
$Details."Expected State" = Get-Ink ("OK")
If ($Service.State -eq "Paused")
$Details.State = $Service.State
$Details."Expected State" = Get-Ink ("OK")
$Services += $Details
$MyReport += Get-HTMLTable ($Services)
$MyReport += Get-CustomHeaderClose
$eventLogs=[System.Diagnostics.EventLog]::GetEventLogs($Target) | where {($_.LogDisplayName -eq "Application") -OR ($_.LogDisplayName -eq "System")}
$warningEvents = @()
$errorEvents = @()
$LogSettings = @()
$MyReport += Get-CustomHTMLClose
$fullReport += $MyReport
$MyReport = $null
$Date = Get-Date
$Filename = ".\" + "Exchange_Health" + "_" + $date.Hour + $date.Minute + "_" + $Date.Day + "-" + $Date.Month + "-" + $Date.Year + ".htm"
$fullReport | out-file -encoding ASCII -filepath $Filename
Write "Audit saved as $Filename"
Invoke-Item $Filenameplease refer to my scripts below, it should get you started.
http://www.myexchangeworld.com/2010/03/powershell-disk-space-html-email-report/
http://www.myexchangeworld.com/2010/07/powershell-script-to-monitor-exchange-server-2010-services-email-report/
you can customsise this to your needs and add relevant information.
cheers
thiyagu
Thiyagu | MCTS/MCITP - Exchange 2007 | MCSE 2003[Messaging] | http://www.myExchangeWorld.com. This posting is provided "AS IS" with no warranties, and confers no rights.
Maybe you are looking for
-
Click Thru Destination from Third Part Website Metrics
Hi, I was interested if anyone has successfully seen metrics for click thru destinations using web advertisements. I can create the campaign schedule (Internet Advertisement) and create the content and get the tracking URL. However, after clicking on
-
Mass upload of characteristics and long text for Object Links in DIR
hello all I want to upload characteristics and long text of Linked Objects in Documents: i wanted to use BAPI_OBJCL_CHANGE and family but, it is a class that is on a different level than the DIR as it does not belong to the DIR directly, but to objec
-
Is apple tv the only item that can be connected to a tv for airplay to work? Looking for something smaller for the office
-
Does anyone know where I can find speaker stands compatible with the SBS 560? Thanks in advance!
-
With new Pages (5.0.1.) documents cannot be exported to pdf or word on a reliable manner. Some documents can be exported while with others unknown error occur during the exporting process. There is no way to identify or rectify the error. Thanks for