Special Procurement and In-House Production on the same plant?

Hi All,
There is a Plant A and Plant B. Plant A makes its own stock of material Z and sometimes gets it from Plant B as well through STO. For such cases where a plant gets stock from another stock, we have a special procurement type configured with the supplying plant. Now in material Z's master record (Plant A) I need in-house (E) and external (F) both WITH special procurement type. So I used X (both) and special procurement type. I got a warning that F is required. Saved it. Now when I enter a PIR on Plant A and run MRP, it directly made an STPO for Plant B instead of scheduling production at Plant A itself. There is no fixed criteria except capacity, Iguess. How can I solve this?
Thanks.

Hi Bilal,
There are lot of information about this Quota arrangement in the web, in help.sap.com, in SCN community and many other places on the Internet.
According to the rules of engagement, you should search before asking:
The SCN Rules of Engagement
I put SAP Quota arrangement in google and here you have links with screenshots, documentation, etc..all about quota. E.g.:
Configure Quota Arrangement in SAP MM
Quota Arrangements - Material Requirements Planning (PP-MRP) - SAP Library
Your post will be rejected by the moderator if you don't follow this rules.
So please try with Quota and if that resolves your issue, please close this thread. If you have specific doubts about the Quota, you can open a thread, but try to find the response by your own before posting.
Kind Regards,
Mariano

Similar Messages

Available working time for setup and produce activity is not the same.

Hi,
For some resources, there are certain setups which require high skilled operators that work less time that the machine. In the setup matrix these setups are recognized because they take much longer than the normal setups.
How can I control that no setups with special operators are planned outside operators working time?
Let s say the machines work along the 3 day shifts and the setup operators only one shift per day.
I thought to use a secondary resource in the setup phase activity or adding a phase with the opertors modeled as a resource to the operation. It adds complexity to a solution the fact that setup times depend upon the setup matrix assigned to the resource so they are variable!
First option was not good because secondary resource cannot present relationship start-start and end-end with the primary resource, moreover, which lead time do we enter in the secondary resource?
Second option was not good either because setup times are variable for all the "special" resources and all of them use the same operators.
CTF

Try mapping the scenario with sub operations and assign the highly skilled labor to the sub operation and machine to the main operations.
Rgs - Vikas

ASA 5505 as a SSL VPN Server and Easy VPN Client at the same time?

Is it possible to configure and operate the ASA 5505 as a SSL VPN server and Easy VPN Client at the same time? We would like to configure a few of these without having to purchase additional ASA 5505 and use a 2 device method (1 SSL VPN Server and 1 Easy VPN Client). Thanks in advance.

I don't think it is possible. Following links may help you
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml

HT2534 i have three apple devices in my house all sharing the same apple id as my daughter is under age but is downloading apps which appear on my phone how can i overcome this.

i have three apple devices in my house all sharing the same apple id as my daughter is to young to have her own.
The problem i have is her apps and music appears on my phone is there away around this.

Turn off automatic downloads:
Settings > iTunes & App Stores > Turn off Automaic Downloads for Music, Apps and Books

2 iPhones in my house, both on the same Apple ID. Just got iPad mini, want to use iMessage with my phone number, but iPad only picks up other more recently added number (not mine) when I go to message settings. Is there a way to default to other number?

Hi guys, so we have 2 iPhones in my house, both on the same Apple ID so that my mum and I can share everything. I have just got an iPad mini, and would like to use iMessage on it with my phone number, but the iPad only picks up other more recently added number (not mine, my mums) when I go to message settings. Is there a way to make the iPad default to other number?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Troubleshooting Messages http://support.apple.com/kb/TS2755
 Cheers, Tom

When I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router

when I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router.
Below is some info i get about ports.
I tried to set DMZ on my main router to have full access to ported to access point upstair which is in the ip of 192.168.1.2 and the main router in the living room is the gateway router with the 192.168.1.1 ip.
I still cant see apple tv after i try the DMZ method.
any suggestion ?
These network ports are used by Apple TV for communications on your network.
TCP port 123 is used to communicate with a network time server.
TCP port 3689 is used to communicate with iTunes while using the iTunes Library Sharing feature.
UDP port 5353 is used by Apple TV for automatically finding computers with iTunes on your network using Bonjour.
TCP port 80 is used for communicating with podcast servers.
TCP port 80 and 443 are used for basic and secure communications with the iTunes Store via the Internet.
TCP port 53 is used for regular DNS.
These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router. Note: These ports may also used by other services such as YouTube and Flickr.

When the Apple TV is paired with a remote, it means only that remote can control it, when it's not paired any remote can control it. You will need a remote for each of your devices.

Can't i use xml schema and oledb data connection at the same time?

Hello to all and thanks in advance.I use xml schema and oledb data connection at the same time and the problem is that when I try to export the xml, the outcome is not what i expect.Without the oledb connection everything is ok (just the schema) and the xml complies with the schema.
Can't i have both schema and oledb and the exported xml be as i want it?

You can use both at the same time, but not gor Internet access if that's what you're asking.
Now there is a thing called Link Aggregation, which combines a number of interfaces for speed/redundancy, but it really only works locally, and then only with ALL special equipment in the route, and most likely OSX Server involved.
Sorry.

Multiple ios products with the same name.

Hello guys,
We have multiple iOS universal products with the same name for different countries. Will it cause any issues when the user installs them in the same device? Using Xcode to push them to my device, i noticed that they are all installed in the same place, i.e only one app is available. So my question is how should we do to use the same name for multiple apps and is it possible?

Go ahead and doubt if it makes you feel superior.
For others:
If your pom has this:
<dependency>
               <groupId>javax.faces</groupId>
               <artifactId>jsf-api</artifactId>
               <version>${jsf.version}</version>
          </dependency>
          <dependency>
               <groupId>javax.faces</groupId>
               <artifactId>jsf-impl</artifactId>
               <version>${jsf.version}</version>
          </dependency>
where jsf.version = 1.2, change jsf.version to 1.2_10

Multiple products in the same domain

Hello,
I installed the following 12.1.3 products on my Linux configuration :
- Oracle Fusion Middleware Infrastructure
- Oracle Enterprise Repository
- Oracle HTTP Server (managed by WLS)
- SOA Suite Quick Start for Developers
- BPM Quick Start for Developers
Then I installed required patches and I created database schemas with RCU.
My question is what's the configuration process if I want to configure all these products in the same domain?
Do I have to run config.sh script for each product or running config.sh one time for all products is the solution?
Thanks
Daniel

Hi,
In India site, you can create a SMTP connector which point to the local ISP.
Thanks.
Niko Cheng
TechNet Community Support

SRP521W - Local and Remote Traffic Cannot be the Same Subnet Address

I support an existing VPN infrastructure with PIX, Juniper NS5GT, and Netopia devices used as VPN endpoints. In all cases, I can create a VPN where the location's internal subnet, 10.x.y.0/24 sends traffic to 10.0.0.0/8 out the VPN tunnel. In the case of this 521W that we are evaluating, it appears that I cannot do this. Insteadm when creating the IPSEC policy I get this error "Local and Remote Traffic Cannot be the Same Subnet Address." Which, while strictly true, has never been an issue with all the above devices. Is there a workaround or other methodology to support this?
Thanks.

We have extactly the same problem with the SRP527W. Other Cisco small business products work like.
Cisco RV 120W
http://www.cisco.com/en/US/products/ps10852/index.html
Cisco WRV210
http://www.cisco.com/en/US/products/ps9929/index.html
We need a device with that supports one IPSec VPN and one ADSL interface and is easy to use like these devices.

Portal 7.x and 8.x app in the same domain

Here's the deal.
I am developing a brand new Portal 8.1 app. At the same time, I am upgrading a
Portal 7.x app. The requirement is that they both run on the same domain, and
preferably as two desktops. How do I do this? Can they share the same webapp within
an application, or do they need to be separate webapps? Any dB issues that I need
to worry about?
Thanks
Kunal

Yes, it saves a lot of grief, providing all servers are equally secure of
course...
On Mon, 8 Dec 2003 18:43:29 -0800, "Carl" <[email protected]> wrote:
Very cool. How does it work under the covers? The two WLS domain talk with
each other? So, the following would work:
o We have a WLS 7 domain
o The domain uses RDBMSRealm
o We created a new WLS 8 domain
o We set-up the trust
o Now, we login in to app on 8 domain, and it checks the 7's realm?Not quite - 8 still needs its own realm. The subjects (users and groups)
have to exist in both realms - 8 will just be taking 7's word for it that
"fred" has been authenticated but will still need to check fred's group
and/or role mappings.
The same realm data needs to exist for both systems. In LDAP it would be
easy enough to point them both at the same directory but.for a database
there is less control over the mappings - any differences between RDBMSRealm
and 8's RDBMSAuthenticator (unless you want to run compatibility security)
schemas might cause problems. I believe running the latter on both should
work but in principle the schema could change in a later version of the
product.
>
"Alex Thomas" <[email protected]> wrote in message
news:[email protected]..
See "Enabling Trust Between WebLogic Server Domains" section in
http://e-docs.bea.com/wls/docs81/secmanage/domain.html#1140940
This works between 7 and 8 (and, using the system account, on 6.1).
cheers
Alex
On Fri, 5 Dec 2003 10:22:29 -0800, "Carl" <[email protected]> wrote:
You can make the 7 domain trust the 8 domain so users don't have to log
in
twice, but you can't run the two versions in the same domain (not agreat
deal of benefit in doing so, once trust is sorted).How we do make 7 domain trust the 8 domain?

Video out settings HDMI and Component out run at the same time?

Does anyone know if I can get video out of both the HDMI port and component video connections at the same time. Trying to distribute video throught the house on component, and still get HD on the flat panel in the living room. Any help would be greatly appreciated.

Apple says when both HDMI and component are connected, HDMI will take precedence over component. Short answer: no.

Hight of ipod and click wheel surface not the same

The highness of surface from my ipod itself and clickwheel is not exactly the same. clickwheel is a little bit higher which is irritating while using it.
I checked some other ipods (5g's) and some have exactly the same level all over the cover which gives a better feeling.
Is it a failure from production or just a question of allowed tolerances?
Any experience with apple support?
ipod video 30gb Windows XP

After a lot of searching and working on this, I found the problem - and it wasn't my previously theorized conspiracy to get us all to buy more from Apple.... It was quite simple actually.
http://docs.info.apple.com/article.html?artnum=304508 I followed all of these directions including re-installing the dlls and the usb drivers, but I think the key was that I have multiple USB devices plugged into my computer. I unplugged all but my wireless keyboard. Then I used a different USB port for my iPod than I had tried before. It updated..... Yeah. I don't have to buy one of the new over priced fancy models!!!!

Null and empty string not being the same in object?

Hello,
I know that null and empty string are interpreted the same in oracle.
However I discovered the strange behaviour concerning user defined objects:
create or replace
TYPE object AS OBJECT (
value VARCHAR2(2000)
declare
xml xmltype;
obj object;
begin
obj := object('abcd');
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
obj.value := '';
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
obj.value := null;
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
end;
When creating xml from object, all not-null fields are transformed into xml tag.
I supposed that obj.value being either '' or null will lead to the same result.
However this is output from Oracle 9i:
<OBJECT_ID><VALUE>abcd</VALUE></OBJECT_ID>
<OBJECT_ID><VALUE></VALUE></OBJECT_ID>
<OBJECT_ID/>
Oracle 10g behaves as expected:
<OBJECT><VALUE>abcd</VALUE></OBJECT>
<OBJECT/>
<OBJECT/>
However Oracle 9i behaviour leads me to the conclusion that oracle
must somehow distinguish between empty string and null in user defined objects...
Can someone clarify this behaviour?
Thus is it possible to test if object's field is empty or null?

However Oracle 9i behaviour leads me to the conclusion that oracle
must somehow distinguish between empty string and null in user defined objects...
Can someone clarify this behaviour?
Thus is it possible to test if object's field is empty or null?A lot of "fixes" were done, relating to XML in 10g and the XML functionality of 9i was known to be buggy.
I think you can safely assume that null and empty strings are treated the same by Oracle regardless. If you're using anything less than 10g, it's not supported any more anyway, so upgrade. Don't rely on any assumptions that may appear due to bugs.

Ive lost my apple ID for my ipod, now i have an iphone and i want to use the same apple ID for both can someone tell me how to do this

I have lost my apple ID for my ipod, now ive got a new iphone and i want to use the same ID for both, can anyone one tell me how to do this? ( i no my ID for the iphone)

Just use the same ID.
These may alos help:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

Special Procurement and In-House Production on the same plant?

Similar Messages

Maybe you are looking for