Srceen goes gray after the apple goes off then the monitor says no signal..
srceen goes gray after the apple goes off then the monitor says no signal.. It been working great for 9 months use it everyday for fcp.. would the video card be bad???
If the video card were bad, you wouldn't get anything to display. The fact that you get the gray screen with the spinning gear means the video card is working.
So, two things I would try, and you can pick the order. The first is to reset the PRAM. You may want to save this for last since it will reset a few of your settings. Nothing major, but can be annoying. The second is to start the system in safe mode by holding down shift while booting.
If safe mode works, then you have some corrupted preference files or some other program is causing problems. If safe mode doesn't work, you can at least see if zapping the PRAM lets you get any further along with the boot process. Only if both of these fail would I start to consider an issue with the video card.
Similar Messages
-
My itouch won't turn on. All that shows is the apple icon and then the screen goes blue to white. Is there a way to fix this or is my itouch unfixable? HELP ME!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I've recently tried reseting the whole Ipod and it came up with an on-screen message saying ''are you sure you want to reset the device? it will take up to an hour and no music or pictures will be restored'' so i clicked ''Yes, Rest'' (or what ever it said). I am now sitting here 24 hours later with an ipod that won't turn on.
i have tried holding the 'power' button down along with the 'home' button for 30 seconds etc.. and nothing is working; it won't show up on Itunes niether the computer. why won't it turn on?If you did not try any items listed here, try them
iOS: Not responding or does not turn on
I still problem make an appointment at the Genius Bar of an Apple store. -
please help me ? ):
Hi there Binilou,
You may find the troubleshooting steps in the article below helpful.
iPod Displays a Red "X" Icon
http://support.apple.com/kb/ts1463
-Griff W. -
Hi!
I purchased my AppleTV in Miami, but I live in Argentina.
I have not been able to get my device running correctly, and altough I've read tons of things online, I still have no solution to my problem.
Here's the thing: after everything's plugged in and ON, I see the Apple logo briefly, then the TV displays a sign that says no signal, check pwoer cords and power source.
But everything is plugged in and connected properly, otherwise, I doubt I'd be seeing the apple logo, right?
I tried changing the HDMI cable, reversing the ends, switching ports, hard resetting the ATV, and trying a different TV. No luck.
I read there is some issue with Samsung TVs, and most LED and LCD tvs down here are Samsung.
On the other hand, I cannot return it or exchange it, since I bought it in the states.
Oh! One of the tvs I tried it on displays a little sign that reads "connected at 1280x720 @60hz", and only THEN, goes to the "no signal" sign.
Please!!! I am being driven up the walls here.... HELP!!Try this:
Change the Apple TV resolution:
Press and hold the Menu and Up button on your Apple Remote for six seconds.
The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals.
Press Play on the Apple Remote to keep the current resolution or Select to manually cycle to the next resolution. -
hellow
my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzzHi there shehla sattar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
-Griff W. -
I was updating my iPod touch 4g to the ios6 and it told me to hook it up to the iTunes and so I did. After doing that the computer told me to restore I tried and it didn't work. My ipod then was Turing on and off displaying the apple icon then my screen turned white with rainbow colors going down the screen then at some point my ipod had a multi colored blue screen. The screen was no longer blue after I let it die. Plz help I can't find any solutions.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
When i plug my Ipod touch 4th generation in it goes to the apple screen and then shuts off and then turns back on and goes to a solid blue screen.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time. What should i do????????????????????????????????????????????????????????????????????????????? /
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It was working great for the first week that I used it, but now it doesn't give me the converting option. I am very frustrated as I have done nothing to change anything, and I was thinking this was so great...now I am just pulling out my hair and do not have the option of calling anyone since no phone numbers are listed. I am VERY busy and do not have time to sit and wait over a half an hour to "chat", which I tried to do yesterday. All I want to do is very simply, convert pdfs to Word. I have paid for this and am not getting any help. I am not very savvy when it comes to Adobe this program and Adobe that program...I feel I am being scammed as I do not get simple answers for something that appeared was going to be simple. You can't even call customer service to talk to someone live to help walk you through.
Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha -
hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?
Try here:
iOS: Not responding or does not turn on -
My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected
If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages. -
the iphone 4 runs iOS 4.3, it did not incur any physical damage. The phone went off and when i connected it to the charger it brought up the cable icon and arrow saying connect to itunes. i tried connecting to the PC however it will not boot. it only only starts to the point of displaying the apple sign and then restarts. this sequence repeats.
please advice on what to do?you can try downloading tiny umbrella and kicking it out of dfu mode... that may or may not work other wise you will have to make a trip to the apple store for replacement
-
my sons ipod shows the apple sign and then occasionaly a white screen appears and then goes back to the apple symbol.. He cant get it to turn on.. He has tried charging it.He also held down the sleep/wake button and the home button at the same time to reset it. we need help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
okay i have been trying to access the itunes store from my computer and after i click the tab the words accessing itunes store scroll across screen the the screens goes white and only the apple symbols is in the box.....WHY. Is the store down??
Hello there jodi o,
It sounds like you are unable to access the iTunes Store on your computer. I would recommend you use the following article to help troubleshoot that:
Can't connect to the iTunes Store
If the issue persists after using the info for your operating system in the above article, here is the more advanced version with further troubleshooting info:
iTunes: Advanced iTunes Store troubleshooting
If you are using Windows, you should also try the information in this article:
Apple software on Windows: May see performance issues and blank iTunes Store
Thank you for using Apple Support Communities.
All the best,
Sterling
Maybe you are looking for
-
Color Management Discrepencies Between Bridge, ACR & Photoshop
Hi - I've had a color management issue I can't wrap my head around which is similar to this infamous thread: http://forums.adobe.com/message/3235601#3235601 I'm hoping with a little more information provided I can get this figured out. The basic prob
-
Keeps printing done...
I know why this code keeps printing done, its one my for loops. Currently this code does percisily what I want it to with a few hiccups that will be fixed. The current problem is that it keeps printing done for each row or record it places in the csv
-
Just bought PSE7, should I return it and swap for PSE8?
I had a brief look for PSE8 being on the horizon but didn't spot anything at the time (I don't know why but something I read led me to believe they were not yearly and regular as clockwork!). Anyway the reason I was looking in the first place was tha
-
How to copy the value of two tables into a view.
Hi Experts , I have a requirement in which i have been provided with two tables(T1,T2) of same table structure ,i need to copy their entries into a table view with the same structure as the two tables(T1,T2) . suppose T1 has entries name age T2 has e
-
Hi all, Is it possible to alter the sql query of an interactive report, in a dynamic way? I want load a given query, in execution time, to an interactive report. How can i access the internal ApEx database tables? Could i write into the table respons