Standard product hierarchies

CRM 5.0 Sandbox is just installed in my system. when i m trying to create a new product hierarchy , standard product hierarchies  like R3PRODSTYP , R3PRODHIER are missing .
Could aye one guess what could be the wrong .
Regards,
Rabikumar

hi ravi
see as attributes are attached to a certain set type so that set type can be assigned to the category
as you say the standard set type is missing,then what you have to find out is that what are all attributes that are used to create that set type .
if its a standard set type then check in some other client with in the CRm ,so that you can see what are all attributes that are attached to it
using the same attributes,you have to create those attributes in your current system and then create a set type to which you can attach the attributes,now you can use this set type for your purpose.
normally standard set types cant be missing in the system,serach it all over again.
else do as i said,this is the only way to retrieve those set types which are missing.
best regards
ashish

Similar Messages

  • Free goods secquence with customer hierarchie and product hierarchie

    Hi  guru's,
    I'm currently working with a secquency for free goods with customer hierarchie ans product hierarchie, but is giving me a lot of problems of dums ,  I think that SAP standard doesn't allow it because the customicing is diferent than the secquence for pricing that has 2 more fields open: V_T682Z-FSTST and V_T682Z-MBWRT that could allow me to set the levels of the hierarchie. Despite it works with the same table T682Z.
    Has anybody had the same problem as me? Can you help me please.
    Marta Gallego

    Maintain your entries in " Determine Item Category For Free Goods Item"
    For the combination of Order Type-ItemCatgrp(ERLA)-Usage(Free)-Item Category(Tan)
    Lets see if it works for you.

  • Configuring Product Hierarchies

    Hi
    plz guide step by step configuring Product Hierarchies. ( OVSV ).
    thanks
    James

    James Thomas,
    Prodcut Hierarchy helps in defining the product composition. it is Alpha numeric string with three levels
    0001000200030004 total 18 charchters.
    Standard Structure is 5 -5 -8
    00001 - represents Ball Bearings
    00002 - repersents the Usage and dimensions
    00000003 - represents the roller-Bearing
    So when you are using a product Ball bearing for pricing in sales, it takes all these parameters under consideration. When Prodcut hierarchy ismaintained .
    We can also arise error message or warning message in VOV8 details screen under transaction flow heading.
    Configuration is carried out in IMG --> Logistics General --> Material Master --> Settings for Key Fields --> Data Relevant to sales and Distribution --> Define product Hierarchies --> Click Maintenance product hier archies - Tcode - Transaction V/76
    Click new entries and maintain it.
    For using it for analysis purpose (Costing based or Accounting based) use Tcode KES1
    Regards
    Sathya

  • How to use Multiple Product Hierarchies in Shopping Cart creation

    Dear SRM Experts,
    We have an issue in using multiple Product Hierarchies while creating a shopping cart. Need your help to resolve this.
    Our SRM system is integrated with 2 ERP back-end systems. In material replication we have created 2 hierarchies for different ERPs and their product categories are stored in respective hierachies.
    Example:
    EBPMATCLAS is for ERP1
    EBPSERVCAT is for ERP2
    Now when I create shopping cart, it allows only those products which are part of EBPMATCLAS because of below configuration..
    We cant configure multiple hierarchies for purchasing so we are not able to use both Hierarchies simultaneously.
    Request you to help with the possible solution to use multiple hierarchies.
    Thanks
    Rajan

    Hi Rajan,
    You not need to create 2 hierarchy ID. Inside the R3MATCLASS you can see the reference with both banckends.
    Ex:
    R3MATCLASSECCCLNT001
    R3MATCLASSECCCLNT002
    Rgs,
    Pedro Marques

  • Hi!  I just purchased a new computer and would like to transfer my Adobe5.5 Design Standard products from my old computer to the new one, but am unsure how.

    Hi!  I just purchased a new computer and would like to transfer my Adobe5.5 Design Standard products from my old computer to the new one, but am unsure how.  When I called Tech Support, they suggested forum because this is such an old product.  Is it best if I just purchase the new product?  Do I have to do anything else?
    Thanks for ANY help!

    as long as you have your serial number, you can install on your new computer.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • Product Hierarchies in COPA

    Folks,
    I'm trying to figure out how to configure the product hierarchies in CO-PA in ECC 6.0 version. I saw an OSS note -62690- that talks about an "automated" solution for the more current releases. However, it doesn't give specifics around how it works.
    Could someone please explain how it works step by step. I also keep getting this information message that says :
    Product hierarchy field PAPH1 cannot be adapted to the new structure Message no. KE691
    When I try to add the hierarchy characteristics from Table MARA, (like PAPH1, PAPH2 etc.), I realize that they are not available anymore. What could be causing this problem? Any ideas on a solution?
    Your help will be greatly appreciated
    Baris

    Hi Maruthi,
    thank you for your feedback. But I don't think that answers my question. The product hierarchies are already maintained in the material master. So, I don't think they need to be maintained again using the transaction KEDE. Am I missing something here?
    Thanks,

  • Difference between sale order Costing & Standard Product Costing

    Hi experts
    I wanted to know Importance of Sales Order Costing & standard Product Costing.what are the benefits of these.
    Regards
    Sandeep patil

    Dear Sir,
    we are implementing SAP in packing industry. In packing industry in PP Bill of material is frequently change, for this we are implementing sales order costing.
    We are doing the following things,
    1. we are doing the inquiry at that time we are doing unit costing.
    2. On the basis of inquiry we are preparing the quotation. the unit costing done in inquiry flow to the Quotation because we r preparing the quotation with reference to inquiry.
    3. Similarly we are preparing the sales order based on quoation and unit costing data flows.
    4. Now when we run the MRP it doesnot explode the unit costing material requirement.
    Please tell us how the unit costing material data will flow to MRP run.
    Please reply.
    Regards,
    Bhadresh

  • Price Determination in Sales Order - for a Standard product & Custom Produc

    Hi,
    The price information is not displaying at Item Level in Sales Order for my own product 'SalesProduct1' and to my custom Sales order (z-TA). However, for standard products (Ht-1000, HT-1010, HT-1100 etc.) the price information is getting displayed successfully in z-TA.
    Also, in standard sales Order transaction (TA: Sales process). The price information is getting displayed successfully for both Standard products (Ht-1000, HT-1010, HT-1100 etc.) and for my own product (salesproduct1).
    Could you please help me out, how to rectify this problem ie. How can I diplay the price information for salesproduct1 in Z-TA?
    I tried to duplicate all the information that is there in standard products like category, sales Area etc, except PR00 price condition to my custom salesproduct1. However, in the place of PR00, I have added 0PR0 price condition and price information.
    Still the price information is not reflecting in my custom sales order (z-TA) for my salesproduct1.
    I also verifed that the SalesAreas are same for BP, Product org, Product price condition, Sales Order org info.
    I also checked that BP the Customer pricing procedure is Standard and for Doc. pricing procedure in Z-TA, TA is Standard.
    I also confirmed that in price procudere determination there exists a record that mathces with these salesarea, cust pp, doc. pp.

    Hi,
    in order to get closer to the root cause of the issue, you might want to make use of the pricing analysis / price trace. Set the user parameter PRC_TRACE = X via transaction SU3. Create an order in SAP GUI and navigate to the item level conditions tab. You should find the button accesses. In the accesses screen you will find details on condition determination and why it failed / succeeded.
    Best Regards,
    Michael

  • Significance of Long Text Field in Standard Product Repository

    Hi All,
    In Standard Product Repository i could see on Field with Name "Long Text" of type "Text Large". Can any one explain me what is the use of this field and data population logic for this field i.e. from which table/field of ECC & CRM this field will be populated..
    Regards,
    Shiv.

    got it.....

  • To find out how SAP is handling language support in the standard product.

    Hi All,
    i have one issue like "To find out how SAP is handling language support in the standard product". Any body have the solution, please send me as soon as possible.
    i am very thankful to you all in advance.
    Thanks & Regards,
    Nagarjuna.

    It would be easier to send a solution if you'd clearly defined the problem!.
    SAP is built to be multilingual. 
    For ABAP development, to ensure that your code is able to be multilingual, you should not hard code any text that the users could see - you should instead use text elements, standard texts, OTR, message classes etc.
    matt

  • Benefits/ Limitations when we use  SAP HANA Extended and Standard products.

    Hi All,
    We are going to purchase SAP HANA media. Please let me know what are the benefits/ limitations when we use  SAP HANA Extended and Standard products.
    Thanks in Advance,
    Vishall

    Hello,
    please check Master Guide (page 9 - chapter 1.6 Software Components)
    https://service.sap.com/~sapidb/011000358700000604552011
    There you can find edition comparison and detailed description.
    To extract the short summary:
    Platform edition = SAP HANA Database + Studio + Client + Host Agent + Information Composer
    Enterprise edition = (Platform edition) + LT Replication Add-on (SLT) + LT Replication Server (SLT) + SAP BO Data Services
    Enterprise extended edition = (Enterprise edition) + Sybase Adaptive Server Enterprise + Sybase Replication Server + Sybase Replication Server Agent + SAP HANA load controller
    It depends on what licenses you already have and how do you intends to use HANA.
    Platform edition = ETL via BO Data Services (you already have license for BO Data Services)
    Enterprise edition = SLT and/or BO Data Services (including licenses)
    Enterprise extended edition = all replication technologies
    Tomas

  • Launch fail on any CS6 creative suite  design standard product

    Hi,
    Each time i try to launch any CS6 creative suite  design standard product, i see the start windows and it close after one second.
    I try to :
    -Temporarily disable plug-ins,
    -Re-create preferences,
    -Disable Compatibility Mode,
    -Disable startup items and services,
    -Log in using a new local administrative user account,
    -Delete all Adobefnt*.lst files,
    -Troubleshoot font issues,
    But nothing works.
    It was working since one year, but suddenly : nothing !
    my Pc is under Windows seven.
    I Hope you can help me.
    Best regards
    Alain
    BALAY

    Ho yes , i forget to say that but already try to launch as admin : doesn't work better !

  • Transfer newly created Product hierarchies from R/3 to CRM

    Hi Experts,
    Initial load is done and delta download is also set.
    Now In R/3 New product hierarchies are created. How to move them from R/3 to CRM.
    They are all stuck in SMW01.
    With the following "Mapping Error"
    "Category for product hierarchy 4005000501000291 does not exist
    Can i manually create a Product Hierarchy in CRM or Shall i run RSA1 again by deleting  the present hierarchies.
    What shall i do?
    Thanks & Regards
    Mythili

    Hi chandra,
    If we look at the inbound queue (SMQ1).
    For R3AD_MATERIA590397-515 the error is : Error in Mapping (Details: transaction SMW01)
    When I go and see in SMW01 it says : Mapping Error, because of this I have created Request load and for the request load queue :
    R3AD_MATERIA010210-000 error is : Exception condition "GUID_FOR_LOGSYS_CHANGED" rais
    If we see other queues
    CSABUPA0000103261 error is u201CBDoc Message processing cannot be started. MW notu201D
    CSA_ORDER_0000000031 error is u201CBDoc Message processing cannot be started. MW notu201D
    R3AD_1 error is u2018Exception condition "GUID_FOR_LOGSYS_CHANGED" raisu201D
    R3AD_CUSTOME0000100007 error is u201CException condition "GUID_FOR_LOGSYS_CHANGED" raisu201D
    R3AD_LEDELIV0 error is u201CException condition "GUID_FOR_LOGSYS_CHANGED" raisu201D
    Coming to Queue information:
    There are around;
    Number of Entries Displayed:           349,148
    Number of Queues Displayed:              1,227
    Thanks & Regards
    Mythilli

  • Report of List FERT goods' standard production labor time

    Hi Expert,
    Is there a standard report can list all FERT goods' standard production labor time?

    Bean,
    you mean the labor time in routings or recipes ? There are some reports as CA51 that list the routings for a plant but it is not specific, as the labor time is not a fixed parameter but depend the way you define the work center. The labor time can be the first , second, etc.  standard value in the operation.
    Regards

  • Two Product Hierarchies ?

    Hi Gurus,
    Kindly can any of had used two product hierarchies in same instance one for global & another for local country, if yes then hw was it maintained and what is the implications in planning & finance etc.
    Thank you very much in Advance
    and answers will rewarded with points.
    Kind Regards
    RK

    Same instance means same client too, right?
    Actually this question should belong to CO or SD forum since product hierarchy is mainly used there.
    Baseline;  it is possible to maintain globally (at basic data view) and locally (at sales view) differently.  Most of the data used for sales reporting, pricing, and COPA reporting will use at local.  You can also do the map using derivation in COPA to obtain "global" product hieararchy.
    Hope it offer few helps.

Maybe you are looking for