Status Definition in Project Administration

Hi@ll
i want to know, if you define Status in the PROJECT_ADMIN then this statuses will be available at diffrent locations, e.g. Business Blueprint Documents, Configurations Documents etc.
For example, i define 5 status: open, closed, in work, paused, reopened
All them will be shown everywhere i can set a status!
So, if i want e.g. at a business process description dcument only two status: open and in work; can i define this? or will i always be able to choose of all status at e.g. business process description dcument???
i hope you understand this.
thx
Marco

Hi Marco,
The status values you define at SOLAR_PROJECT_ADMIN aren't meant to be available for Documents you upload, they are for other tabs/reasons, including the following:
(1) As a possible Status value in SOLAR_PROJECT_ADMIN itself, in General Data tab
(2) Admin Tab of SOLAR01/ 02
For Status Values for Documents, you have to make settings in Configuration as follows:
SPRO
SAP Solution Manager -> Configuration -> Scenario-specific settings -> Cross-scenario settings -> Document Management -> Status for Documents
You may also like to read other nodes and what they stand for. They are very useful indeed - provided the project is ready to let the SolMan Consultant gather requiremetns and do a proper job. Many of them cannot be (should not be) done in a hurry
Trust this answers; please feel free to pose any other question on this.
Best regards,
Srini

Similar Messages

Project Profile Status Definition

Hi,
I would like to understand the impact and difference on the below 3 options for specifying status profile for Project Definition:
1. if it is left blank
2. if PS000001 is specified
3. if 00000001 is specified
Thanks!
Regards,
Vivian

Hi
1. if it is left blank- There will not be any user status for PD. Hence all the transaction control will be by the system status.U can add profile later.
2. if PS000001 is specified- User status control for PD will be from profile PS000001.
3. if 00000001 is specified- User status control for PD will be according to the profile 00000001
For details of status profile check T code OK02.
Regards

BAPI/FM for setting the user status for the Project definition and WBS elem

Hi,
I have to set the User Status for the Project Definition and the WBS elements in that project.
The User status to be set is the same for the project and wbs elements.
Please let me know if there is any BAPI/FM to set the user status..
Thanks in advance.
Regards
Shiva

Hi Shkithija,
There is a dump encoutered in the form "PS_FLAG_GET_GLOBAL_FLAGS" for 'chk_precommit_ok' in the "BAPI_PS_PRECOMMIT".
But it is showing SY-SUBRC = 0 when used along with BAPI_TRANSACTION_COMMIT.
May i know what are input parameters we need to pass it to "BAPI_PS_PRECOMMIT".
Do you have any idea.
Please let me know
Regards
vishnu

Mass change Tcode for status of multiple projects

Dear All,
Any SAP Standard t code for mass Status change for multiple Projects
(like TECO,AALK).
Thanks.
Arun

Hi
You dont have this option in any STD SAP t.codes, where you can change the status of the projects/WBSE collectively.
So use this BAPI to Read the status of Project/WBSE
BAPI_BUS2001_GET_STATUS To get both the active system statuses and the user statuses for a project definition
use this BAPI to Change the status of Project/WBSE
BAPI_BUS2001_SET_STATUS
one system status and one user status can be revoked each time, and one system status and one user status can be set each time for a project definition
For Network order status change
BAPI_BUS2002_SET_STATUS
Set/Reset Network Status. At the same time, you can revoke one system status and one user status, or set one system status and one user status in a list of activities for the network.
Thanks
S.Murali
Edited by: S. Murali on Jul 24, 2009 3:43 PM

Error while generating IMG View in project administration.

Hi,
When i try to generate IMG project in project administration,
systems displays error "Syntax error in prog:000 SAPLSPRO_STATUS".
How to resolve this.
Regards,
Giridhar

Dear Giridhar,
Please go through OSS note 423857.
Symptom
When you call the transaction SPRO or SPRO_ADMIN a syntax error occurs in the program SAPLSPRO_STATUS. The error can also occur when calling the Testworkbench in the program SAPLSTATUS. The message is 'The addition 'FROM' is missing'.
Cause and prerequisites
The cause is changes with the change documents which only appear, however, when the change document object is transported or generated again.
Solution
Import the corresponding Basis support package
Reward points if this is helpful.
Regards,
Naveen.

Unable to change the status of a project to approved

Dear Members,
I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
Please enter an active project manager for this project in order to change or update this information._
Can any one please help me in resolving this issue.
Many thanks in advance.
Regards.

R4S wrote:
Dear Members,
I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
Please enter an active project manager for this project in order to change or update this information._
Can any one please help me in resolving this issue.
Many thanks in advance.
Regards.Please see these docs.
CMRO Partially Implemented Visit Errors with "Please enter an active project manager for this project in order to change or update this information" [ID 864812.1]
Update_Project Erroring With PA_PR_INSUF_PROJ_MGR While Creating Task For Templates [ID 1085068.1
Thanks,
Hussein

"An unknown error" has occurred in status report in project server 2013

"An unknown error" has occurred in status report in project server 2013

Hi,
It would help if you could provide the ULS logs for this error, even the PWA queue error message. Then has it already been working before?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Bapi or FM for insertion of status for PS project

Hi,
Is there any FM or BAPI through which we can insert status into Projects. in project defination (CJ01) or (CJ02) in basic data tab there is field system status. in front of this field there is push button for maintaining status of project. Where we can select status profile and status required.
I need some FM to insert status to created projects.
THanks.

BAPI-step by step procedure
http://www.sapgenie.com/abap/bapi/example.htm
list of all BAPI's
http://www.planetsap.com/LIST_ALL_BAPIs.htm

Change Management integration with Project Administration

Hi,
Could someone help me understand the integration of Change Management and Project Administration within Solution Manager, pls? I would be very grateful for a sample process to demonstrate the complete workflow. Eg.
1) Support Messages is created
2) Change Request is created from Support Message
3) A project is created for the Change Request
4) ??? What about the blueprint, configuration, testing, learning features? How do they integrate with CHARM?
x) at the end, how does the project created for the Change Request integrate with the project that documents the business process? I mean, if the actual processes of an R/3 system are documented in a SolMan project, and a Change Request is processed, how do I modify the general project with the change project?
This is absolutely not clear either in the on-line help or in the book "SAP Solution Manager"
Thanks in advance,
Adam

Hi,
> 1) Support Messages is created
https://websmp206.sap-ag.de/~sapidb/011000358700000035912008E.sim
> 2) Change Request is created from Support Message
https://websmp206.sap-ag.de/~sapidb/011000358700002931432006E.sim
> 3) A project is created for the Change Request
https://websmp206.sap-ag.de/~sapidb/011000358700005479242006E.sim
> 4) ??? What about the blueprint, configuration, testing, learning features? How do they integrate with CHARM?
> x) at the end, how does the project created for the Change Request integrate with the project that documents the business process? I mean, if the actual processes of an R/3 system are documented in a SolMan project, and a Change Request is processed, how do I modify the general project with the change project?
I am not quite clear what exactly is your requirement here. Change Request Management and Project management are different in their ways. You can handle the documenation tasks through your project management and ChaRM is used for the changes.
https://websmp206.sap-ag.de/~sapidb/011000358700000059722008E
https://websmp206.sap-ag.de/~sapidb/011000358700006819152005E
Rajeev

Cannot map roles other than Project Administrator and SOA Designer

I've installed PS4 HC FP Stage 3 on Windows, and I have seeded the demo community users. When I use Business Process Workspace to map roles to these users, the only roles available to me in the Select Role list are Project Administrator and SOA Designer. I was expecting to be able to map far more roles, thus:
* mtwain needs the Project Creator, Designer, Deployer, Project Documentor, and SOA Designer roles.
* jcooper needs the Designer role.
Any idea what's wrong?

I would like to know also. I have made many DVDs, but the number order does seem to be random. For presentation purposes I want to play a specific clip by hitting it's corresponding number on the DVD player remote when the DVD is at a complete stop (so if I put the movie clip in the 2 spot and hit the number 2 on the remote, then the 2 movie clip will play). I can get this to work from the menu by dropping them in iDVD in the order I want and waiting for each to encode before dropping the next, but at a complete stop I cannot ensure number 2 on the remote will play number 2 on the DVD. To me it looks like iDVD gives those numbers in the order in which the audio is encoded when burning, with the shorter clips first and longer ones last.
Can anyone help me?

Is the new feature of material status definition is supported in ASCP r12

Hi all
I am facing new requirement from Customer which is on R12.
They have a warehouse which by definition is non Nettable. This warehouse manage by locators.
Customer requirement is that group of locators in the warehouse will be nettable despite that the warehouse it self set as non nettable.
They can't set those locators in different nettable warehouse.
My question is releated to the new feature of material status definition on R12 as a nominate for solution for this issue.
As I saw I can set material status as nettable and assigned it to the locator.
I haven't test it yet and I will appreciate your best practices /knowledge feedback If this feature supported in ASCP
Thank in Advance

Hi,
First of all, Warehouses cannot be nettable/non-nettable. I assume when you say warehouse you are referring to Sub-Inventory. You can only have a nettable/non-nettable sub-inventory.
The precise answer to your query on material status is NO.
As of now ASCP does not have the capability to plan based on the material statuses defined in source.
ASCP do not collect the Material Status related information.
You may refer to the following ER:
Bug 17014198 : DATA COLLECTIONS NOT COLLECTING SUPPLIES FROM NON-NETTABLE SUBINVENTORY
Hope that helps!!
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

System Status Change for Project Definition

Hi,
I am working on a requirement to notify the Project Manager when the Project Status changes to REL.
I couldn't find any user exits where I can add the code to send an e-mail notification at the time of status change of the Project Definition or the WBS elements within the Project.
I checked for events in Business Objects BUS2054(WBS) and BUS2001(ProjectDefinition) which might get triggered at the time of status change. I couldn't find any events relevant to Status Change.
Any ideas how to handle this requirement ?
Regards
Bhooma

I found a solution to this issue.
Regards
Bhoooma

Reports to know the status of the projects(Eg:Techni.closed, closed or open

Dear Friends,
Do we have any reports in SAP which will shows the status of all the projects, the same way I want to the report for WBS elements and activities also? I want to check the what all the projects in closed status and what are all technically closed, what are all in open status. Friends please suggest me the appropriate reports for my requirement.
Hari Krishna

Hello
In almost all standard SAP raports you can see some icon - Status -
If you use it you can choose project definitions, WBS elements, networks, activities with status chosen by you.
And PS Information system will show you only objects whit chosen status.
Hope it helps

Details of Project Status Inquiry in project module

Hi Dina,
Will you explain in details below PSI column with example.
01) Ovr Bgt
02) YTD - Rev Bgt
03) YTD - Act Rev
04) YTD - Cst Bgt
05) YTD - Act Cost
06) Commit Amt
07) PTD - Act Cost
08) Tot - Rev Bgt
09) Tot - Cst Bgt
10) Tot - Orig Cst Bgt
11) Fin % Cmplt
12) Est to Cmplt
13) Summarization Exception
Thanks
Regards
GSM

Hi
PSI explanation is included in Projects Management User Guide, Chapter 10, page 10-7 (release11.5.10).
You might also want to review the Project Status Inquiry Setup chapter on the Projects User Guide release 11.0, which list the exact definition and formulas.
01) Ovr Bgt - this column will show the character '*' if the inception to date actual amount plus the commitment amount exceed the cost budget amount. You can select the budget type on the tools menu.
02) YTD - Rev Bgt - Year to Date accumulative amount of revenue budget.
03) YTD - Act Rev - Year to Date accumulative amount of actual accrued revenue
04) YTD - Cst Bgt - Year to Date accumulative burdened amount of cost budget.
05) YTD - Act Cost - Year to Date accumulative burdened amount of actual distributed costs
06) Commit Amt - current burdened amount of summarized commitments
07) PTD - Act Cost - Period to Date accumulative burdened amount of actual distributed costs
08) Tot - Rev Bgt - Total revenue budget from the start date till the end date of the project
09) Tot - Cst Bgt - Total burdened amount of cost budget from the start date till the end date of the project
10) Tot - Orig Cst Bgt -Total burdened amount of cost budget from the start date till the end date of the project, based on the budget version, which was flagged as original (usually, the first version of the budget type).
11) Fin % Cmplt - Financial percent of completion. This is a calculated measure based on the formula: Financial percentage complete:
ITD actual burdened cost / total current burdened cost budget amount X100
12) Est to Cmplt - Estimate to Complete. This is a calculated measure based on the formula Estimate to Complete:
Total current burdened cost budget amount – (ITD actual burdened cost + PTD commitment burdened cost)
13) Summarization Exception - list a note if summarization process could not complete successfully.
Dina

How to capture system status & date in project?

Hi all
I'm using transaction CJ20N for managing all R & D projects.
I want to make a report where I need to capture status REL & CNF of every stage with respective dates.
Can you help me to provide a procedure how to find it through tables?
For example I find process order status in table JCDS & JEST by adding letters OR followed by 4 zeros as a prefix to process order & enter in to field object number.
Please help.

Hi,
Follow the same procedure by using the object number of the WBS. It starts with "PR". You can get the object number of the WBS from PRPS table. To get the object number of the activities you can refer the table AFVC. Pass on the WBS in the AFVC table and execute it. This will list all the activitiies that fall under the WBS you entered.
As an alternative you can use the report CN41N to fetch objects with the REL and CNF status. Change the layout to include the column "Status" in the report. You need to define a status selection profile to fetch only the objects having the REL and CNF status. Refer SAP Help to understand more about this.
Regards,
Gokul

Status Definition in Project Administration

Similar Messages

Maybe you are looking for