Std report to dispaly Sales Order and Profit center data

Hi,
I want to display list of Sales Order and profit center in one report for that Sales organisation
Is there any T-code where i can view Sales Order and its Profit center.
**Plz if anyone knows abt this reply soon.
Thanks
AKASH
Edited by: AKASH TAMBI on May 20, 2008 1:28 PM

Dear Akash
There is no standard report to see both the sale order reference and profit center. However, if you go to SE16 and use table VBAP, you can see the required details
thanks
G. Lakshmipathi

Similar Messages

Report painter, Internal orders and profit center accounting

hi,
I want to do a report using data from internals orders (AUFNR) and profit center accounting (PRCTR).
I can make individual reports for internals orders (6O1, CCSS) and for profit center accounting (8a2, GPLCA) but I can't combinate data from internals orders and profit center accounting.
Is it possible make a report using report painter that show data of internals orders and profit center accounting.
All my internals orders have a profit center accounting.
Thanks in avanced

[url] http://help.sap.com/saphelp_45b/helpdata/en/cc/36428394f311d2b47a006094b9b0a5/frameset.htm
this may be helpful
regards.
santhosh reddy

Report for viewing Sales order no against delivery date & actual GI date

Hi Experts,
Is there any report for viewing Sales order no against delivery date & *actual GI date*
Because in VL06F , i can only able to get planned GI.
Please guide regarding the same where i can get 'ACTUAL GI DATE ' against above combination .
Regards,
Sujit S.

dear Hrishi,
i followed your suggestion, but couldn't get desired results,
here i can get planned GI date, where i wanted to get Actual GI date for complted deliveries,
thanks for your valuable reply.
@ G. Lakshmipathi ;-
i think i will need to develop z-report for fetching the data from the tables
VBAK (to get sale order reference) and
LIKP (to get delivery and actual GI date)
thanks for your reply,
Regards,
Sujit

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be able to put a date in another field that MRP can read in the event we choose to manufacture based on another date. For example, early.
Any help would be appreciated.

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Hi ... I want Internal orders and Profit Center related study material....

Hi
Friend
I want Internal orders and Profit Center related study material....i want to understand what these concepts...
Thank you

Hi
Internal order configuration:
I have uploaded 2 docs here
http://rapidshare.com/files/27424591/IOrder1.pdf.html
http://rapidshare.com/files/27424270/IO2.pdf.html
Regards
A
Assign points if useful

New Report for Opens Sales order and P.O from Plant and S.Loc

Dear Gurus
We have repory requiement for Open sales order and P.O to deliver from particular plant and S.Loc.
If you have already developed this kiond of report help me inthis case.
Thanks
ramki

closed

ERP Sales Order with Profit Center value mandatory in ECC side!

Hi Experts,
I'm working with a scenario using SAP CRM 7.0 and ECC 6.0 EHP4, using ERP Sales Order and ERP Quotation.
The sales order transaction type in ECC side is set up to use profit center at item level as mandatory and I can't find this attribute at Item Details in CRM Webclient. I can't save my order, because this error and the AB Incompletion Log always shows this error.
Any ideas? Is it possible set profit center value in CRM?
Best Regards
Heber Olivar

Hi Heber!,
I hope you are doing well.
We have the same issue, please could you share us how did you resolve this issue?
We have SAP CRM 7.0 EHP2 and SAP ECC 6.0 and for the creation to ERP Orders correctly in SAP CRM is necessary the profit center value.
Thanks in advance.
Best Regards!

Report Needed to show WBS and Profit Center on Invoices

I need a report of open and cleared invoices that show the WBS and Profit Center.
I have tried the FBL5N and it doesn't populate it. Any other reports out there???

You dont have to join them. Keep both profit center and cost centre in the cube. While defining the update rules, derive profit center from cot centre.
In the report , keep profit center and cost centre as free char.
The users can dynamically drill down and view the report for cost centre or profit centre or both.
Another idea is to keep profit centre as a nav attribute in the cube and in that case, you dont have to derive profit centre from cost centre in the update rules.
Ravi Thotahdri

Crystal report link between sales order and picklist

Hi,
Good day!
I am making a picklist document using crysal report. My requirement is to show the sales order number, cardcode, cardname, itemcode, released qty in the picklist. the tables i linked in crystal are the ff:
RDR1.DocEntry linked to ORDR.DocEntry and ORDR.DocNum linked to PKL1.OrderEntry.
I have a sales order with 2 items and then I processed picklist for it. When I run the report, my problem is that it shows the items twice.
Scenario:
Sales Order 1:
Item A 2
Item B 1
When I run the report, it's like this:
Item A 2
Item A 1
Item B 2
Item B 1
I'd already tried adjusting the links but still can't get it.
Please help me.
Thanks so much.
SIncerely,
Jackilou

Hi,
could you please describe how you solve this issue?
Thank you very much!
Regards,
Tobias

Report showing Contract, sales order and invoices created

Hii All,
Is there any standard report showing the sales contract, sales orders created with reference to contract and the invoices with some relevant details such as customer, material, invoice value etc.
If i go to VF05 and then select the a line and see the document flow, i get the contract number, sales order number.

Hi,
You need to create a report of this requirement only through development.
Rgds,
Sivarajesh. J

Need a report that shows sales shipments and billing by date

We need a report that will show sales shipment and billing information by date. Specifically, we need to find orders that were shipped in one month/period, but were not invoiced until the next month/period. Does a standard report exist?

I dont think it is possible. You will have to customize.
For list of deliveries, you can use VL06O.
For billing due list, you can use VF04.
Regards,
GSL.

Performance tuning for Sales Order and its configuration data extraction

I write here the data fetching subroutine of an extract report.
This report takes 2.5 hours to extract 36000 records in the quality server.
Kindly provide me some suggestions for performance tuning it.
    SELECT auart vkorg vtweg spart vkbur augru
              kunnr yxinsto bstdk vbeln kvgr1 kvgr2 vdatu
              gwldt audat knumv
              FROM vbak
              INTO TABLE it_vbak
              WHERE vbeln IN s_vbeln
              AND erdat IN s_erdat
              AND auart IN s_auart
              AND vkorg = p_vkorg
              AND spart IN s_spart
              AND vkbur IN s_vkbur
              AND vtweg IN s_vtweg.
IF NOT it_vbak[] IS INITIAL.
    SELECT mvgr1 mvgr2 mvgr3 mvgr4 mvgr5
           yyequnr vbeln cuobj
           FROM vbap
           INTO TABLE it_vbap
           FOR ALL ENTRIES IN it_vbak
           WHERE vbeln = it_vbak-vbeln
           AND   posnr = '000010'.
    SELECT bstkd inco1 zterm vbeln
           prsdt
           FROM vbkd
           INTO TABLE it_vbkd
           FOR ALL ENTRIES IN it_vbak
           WHERE vbeln = it_vbak-vbeln.
    SELECT kbetr kschl knumv
           FROM konv
           INTO TABLE it_konv
           FOR ALL ENTRIES IN it_vbak
           WHERE knumv = it_vbak-knumv
           AND   kschl = 'PN00'.
    SELECT vbeln parvw kunnr
           FROM vbpa
           INTO TABLE it_vbpa
           FOR ALL ENTRIES IN it_vbak
           WHERE vbeln = it_vbak-vbeln
           AND parvw IN ('PE', 'YU', 'RE').
ENDIF.
LOOP AT it_vbap INTO wa_vbap.
    IF NOT wa_vbap-cuobj IS INITIAL.
      CALL FUNCTION 'VC_I_GET_CONFIGURATION'
           EXPORTING
                instance            = wa_vbap-cuobj
                language            = sy-langu
           TABLES
                configuration       = it_config
           EXCEPTIONS
                instance_not_found = 1
                internal_error      = 2
                no_class_allocation = 3
                instance_not_valid = 4
                OTHERS              = 5.
      IF sy-subrc = 0.
        READ TABLE it_config WITH KEY atnam = 'IND_PRODUCT_LINES'.
        IF sy-subrc = 0.
          wa_char-obj = wa_vbap-cuobj.
          wa_char-atnam = it_config-atnam.
          wa_char-atwrt = it_config-atwrt.
          APPEND wa_char TO it_char.
          CLEAR wa_char.
        ENDIF.
        READ TABLE it_config WITH KEY atnam = 'IND_GQ'.
        IF sy-subrc = 0.
          wa_char-obj = wa_vbap-cuobj.
          wa_char-atnam = it_config-atnam.
          wa_char-atwrt = it_config-atwrt.
          APPEND wa_char TO it_char.
          CLEAR wa_char.
        ENDIF.
        READ TABLE it_config WITH KEY atnam = 'IND_VKN'.
        IF sy-subrc = 0.
          wa_char-obj = wa_vbap-cuobj.
          wa_char-atnam = it_config-atnam.
          wa_char-atwrt = it_config-atwrt.
          APPEND wa_char TO it_char.
          CLEAR wa_char.
        ENDIF.
        READ TABLE it_config WITH KEY atnam = 'IND_ZE'.
        IF sy-subrc = 0.
          wa_char-obj = wa_vbap-cuobj.
          wa_char-atnam = it_config-atnam.
          wa_char-atwrt = it_config-atwrt.
          APPEND wa_char TO it_char.
          CLEAR wa_char.
        ENDIF.
        READ TABLE it_config WITH KEY atnam = 'IND_HQ'.
        IF sy-subrc = 0.
          wa_char-obj = wa_vbap-cuobj.
          wa_char-atnam = it_config-atnam.
          wa_char-atwrt = it_config-atwrt.
          APPEND wa_char TO it_char.
          CLEAR wa_char.
        ENDIF.
    READ TABLE it_config WITH KEY atnam = 'IND_CALCULATED_INST_HOURS'.
        IF sy-subrc = 0.
          wa_char-obj = wa_vbap-cuobj.
          wa_char-atnam = it_config-atnam.
          wa_char-atwrt = it_config-atwrt.
          APPEND wa_char TO it_char.
          CLEAR wa_char.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP. " End of loop on it_vbap
Edited by: jaya rangwani on May 11, 2010 12:50 PM
Edited by: jaya rangwani on May 11, 2010 12:52 PM

Hello Jaya,
Will provide some point which will increase the performance of the program:
1.     VBAK & VBAP are header & item table. And so the relation will be 1 to many. In this case, you can use inner join instead multiple select statement.
2.     If you are very much confident in handling the inner join, then you can do a single statement to get the data from VBAK, VBAP & VBKD using the inner join.
3.     Before using for all entries, check whether the internal table is not initial.
And sort the internal table and delete adjacent duplicates.
4.     Sort all the resultant internal table based on the required key fields and read always using the binary search.
You will get a number of documents where you can get a fair idea of what should be done and what should not be while doing a program related to performance issue.
Also you can have number of function module and BAPI where you can get the sales order details. You can try with u2018BAPISDORDER_GETDETAILEDLISTu2019.
Regards,
Selva K.

Settings in sales order item -Profit center

HI,
When i create a credit note price with reference to billing docment.At the item level the profit center field is unchangable or grayed out ONLY for the first item and its open for other items.
Can you please explain me the behaviour of the system why its grayed out for the first and open for the rest?
where can i see the configuration for sales order item?
Thanks in advance

Hi ,
Please se below docuemnt on thos
http://help.sap.com/erp2005_ehp_05/helpdata/en/39/afe8e13f1d42c8a34d625f677bee66/frameset.htm
Many Thanks

Cannot create sales order as profit center assignment does not take place

Hi,
I am trying to create a sales order but am unable to create it as the profit center value is not picked up the value from material master.And hence, the incompletion log prevents me from creating the sales order. I seem to have done everything correct so far but somehow the profit center field (Account Assignment Tab at item level) remains empty. Instead, i can find the profit center value in "Assignment to Profitability segment".
What should i do so that my sales order picks up the profit center information ?
Thanks in advance.

Hi,
check this link it may helpful,and do search in the forum you may find an existing solution for you problem.
RFBIBL00 - issue in Batch Input Session created
Thanks
Ram

Profit Center change in Sales Order by Profit Center reorganization

Dear FI gurus
I have requirement to change profit center in sales order in mass.
I heard in EhP5, there is function called "Profit Center Reorganization".
For my requirement, this function can be used?
If not, what is this functionality?
Yoshi

Hi ,
Please se below docuemnt on thos
http://help.sap.com/erp2005_ehp_05/helpdata/en/39/afe8e13f1d42c8a34d625f677bee66/frameset.htm
Many Thanks

Std report to dispaly Sales Order and Profit center data

Similar Messages

Maybe you are looking for