Still Latency after Freezing tracks... confused.

Up till now, I haven't really had an issue with Latency until I really started running a good amount of tracks. Right now I have 14 tracks with 1 or 2 plug-ins on each channel. Now I'm having some Latency when using the EXS24 from my controller keyboard (or any instrument for that matter)
When opening a fresh NEW project, there is hardly any noticeable Latency when using a stand alone Instrument.
I thought Freezing tracks is supposed to free up CPU, but before and after freezing has hardly any effect for Triggering and Audio input Latency. I'm a former Cubase 4 user and it's never been this bad. I have the same hardware setup. See my sig.
What can we do to optimize for Latency? Is the Apogee Symphony the only answer?

clank72 wrote:
Don't you hate it when it's always something really simple and stupid? After changing the Recording Delay to 0 and then fixing the Attack on my Logic Instrument most of the Latency went away. The Recording Delay setting must of been "Bumped" when I was adjusting another setting in the preferences.
Recording Delay Compensation is related to fine adjusting sample accuracy setting
with some device/system I need to set it as +/- 50 or similar value..
this is only for be sure about perfect syncronization when an incoming audio signial has been recorded in Logic.
Recording Delay must be change when the audio drivers are direct connected with the A(D converter...
the RME driver does not require adjustment...
0 set should be o.k.
We ALL have Latency. Wether it's a problem has to do with the person and how many live tracks simotaniously. I notice Latency at even 3ms. Some Vocalists will notice too.
Obvious we all have latency... but I mean... I don't have problem to play a faster part of piano solo with buffer setted as 256 on 48 Khz Sample rate (also 44.1 is good in my sustem
If anyone wants to hear their Latency, try plugging headphones into an outboard/external synth that is plugged into your audio device. Arm a track with the correct input from the synth, then turn up your speakers, put the headphones on only ONE ear and the other ear pointed towards your monitors. Load up a snare or sound with a fast attack on it. Hit the keys and you will notice Latency. It might have a chorus effect on it usually.
Usually I route the same MAIN output mirrored to headphones when recording a single instrument or a Vocal tracks.
I prefer to listen exactly the same audio program during recording phase..
I know this is not a "sound engeener" way...
But I prefer to listem everything during recording ... including FX, reverbs and Delay...
I always use SW set to ON!
I think everything is working good for now. It just bothers me when it's somthing simple and I feel like I wiasted someones time on the forum that has put aside time to help me out...err!
I'm glad to know that
you are welcome for any additional question
Thanks!
Thanks
G

Similar Messages

HT5642 After turning off the notification switches of some apps in notificaton center, there are still notifications. I'm confused. Why?

After turning off the notification switches of some apps in notificaton center, there are still notifications. I'm confused. Why?

Just guessing, but I would think, as I look at mine, that it might have to do with when the apps were added to the device. To be honest, identifying this as a bug might not be correct. You are the first person I have seen post something like this, so it must not bother others. You can leave feedback for Apple on the feedback page. Go to http://www.apple.com/feedback and then click on the appropriate link.

Freeze tracks that use instrument objects: explode by midi channel?

Hello everyone,
I've hit a CPU and/or Disk speed wall and need to start freezing tracks. I've setup my environment to use "instrument objects" to control my sampler instruments, allowing for most of my instruments to access multiple articulations from one track. Great method for composition/arranging, but unfortunately it makes freezing instruments a challenge!
I know other users employ a similar method in their own Logic setups, and was wondering how do you guys deal with freeze files? Is there an "explode by midi channel" function which will separate a single track into multiple tracks per midi channel, which I can then easily freeze?
In a somewhat related question, how do you guys with similar setups use folders? Can I put all these "exploded" parts back into a folder for organizational purposes?
Thanks in advance for your reply!

Jonathan,
I'm very very slow to adopting the freezing of tracks to free up resources. I highly doubt that I'll be using it much in the future, because I don't like the fact that the behavior of simple commands like CMD-A doesn't work to select frozen tracks. There are other things about freezing that interrupt my work methods.
I'm very seriously considering getting a second computer to act as an orchestral "module" which I can play via MIDI (over a network, preferably). Based on my experiences during my latest project, doing 4 complex orchestrations, I can see that the amount of time and trouble it takes to freeze tracks/disable instruments to free up resources, and then re-enable them if a change is needed to any given part, will get very long in the tooth after a while. The biggest problem with this is running the risk of Logic crashing when it runs out of RAM.
So for now I'll use the occasional frozen track, or print parts as needed to free up instruments, but budget willing, not for much longer.
Best,
-=iS=-

CP1215 magenta & black still misaligned after new software, calibration and cartridge replacement

CP1215 magenta & black still misaligned after new software, calibration and cartridge replacement
Product name: HP Color LaserJet CP1215 Printer
Model name: CC376A
Serial number: CNB1212035
XP Pro 32 bit service pack 3
No error messages
No hardware or software changes
Connection Method: USB
Issue duplication: This has been a persistent problem and was resolved by replacing the yellow cartridge but has now returned and not solved by replacing cartridges.
Troubleshooting performed: new software, replacing cartridges, calibration
Technical Expertise: How would you rate your PC expertise as? Expert

Additional post
When this happened the first time I found a link on the HP site that was helpful but cannot find this link now but it was just about the same as:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01691296&tmp_task=solveCategory&cc=us&dlc=en&ju...
I find the Print Quality Troubleshooting page confusing. It does not address misalignment. The test pages you get when you press the green button for 2-3 seconds clearly shows misalignment of the magenta cartridge but when replaced with a HP cartridge the exact same misalignment occurs.
I also tried using high grade paper with no change.
HPPDU.exe was run and showed no conflicts.
I updated my printer firmware HPCP1210_FW_Update-20100201.exe

My iphone 4s was stolen i have locked and set it up to erase content when the iphone is turned on, it has 'find my iphone' on it will i still be able to track it if it turns on?

My iphone 4s was stolen i have locked and set it up to erase content when the iphone is turned on, it has 'find my iphone' on it will i still be able to track it if it turns on? PLEASE HELP really want to find it

You're welcome.
Once again, the Find My iPhone app has no effect on this.
Find My iPhone must be enabled with your iCloud account settings on the iPhone.
Location Services must be enabled.
The iPhone must be connected to the internet via an available wi-fi network or via the carrier's cellular network.
If the iPhone is powered off, none of the Find My iPhone features can work, and the same if the thief or whoever has access to the iPhone has restored the iPhone with iTunes as a new iPhone on another computer.

My iPod just randomly deleted all my music, but I no longer have the computer where I synced it to. Can I still get my purchased tracks if I download iTunes on another computer?

My iPod just randomly deleted all my music, but I no longer have the computer where I synced it to. Can I still get my purchased tracks if I download iTunes on another computer?

If for some reason you failed to maintain a backup copy of your computer ( not good), then you can redownlaod some itunes content in some countries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Odd freeze track behavior

I can't get certain freeze tracks to mute. They aren't effected by the mute button and when I solo other tracks, these freeze tracks continue to play. They do respond to the volume fader and pan. Right now it's just 2 tracks and both are audio tracks. Anyone else have a similar problem?

Eriksimon wrote:
Hi, You could mute the regions on the track -
Muting regions does not work with Melodyne plugin or Side Chain compressors.
Melodyne works by streaming its audio slices direct inside the channel strips inserts ... so you can only deselect output and/or turn off automation (that usually contain muted parts) and MUTE the channel strip that with automation off never will be turned to ON!.
The same behavior should happen with a "Side Chained" compressors/gate/expander that use the awesome feature of the Logic Mixer!
infact... Side Chain should be another cause for this issue...
That it is not an issue.... this is a great Logic features... just you need to learn how Logic works ("you" is not refered personally to Erik or Jon... it is only a "general" "you" = new logic users)
Regards
fermusic

Adobe Media Encoder CC 7.2.0.43 still crashes after beginning of encoding - bugs for months now!

Adobe Media Encoder CC 7.2.0.43 is still crashing after beginning of encoding! In my case this bug exists for months now and Adobe is not able to get rid of its own programming faults! The user pays a lot of money for the license and doesn't get a functioning software! I spent days to get a solution now, but NOTHING of your suggested help works!
This is my 'support' history beginning in AUGUST (!):
Sent: Thursday, August 15, 2013 ...
Subject: Bug Report
Product: Adobe Media Encoder
Product Version: CC
Operating System : Windows 7
OS version: Service P1
Concise problem statement: Steps to reproduce bug:
1. Go to Premiere Media Export
2. Stating Media Export Parameters for ME
3. Starting ME
4. Define video title and path
5. Start Media Encoder CC rendering
6. ME states 'Preview not available'
7. Rendering aborts after about 15 sec.
8. Media Encoder CC crashes, no matter which kind of video! Every time.
9. Direct 'Export' from Premiere CC is possible with all the same parameters, but CC AME crashes!
10. Also installed Premiere CS 6 Media Encoder WORKS without any problems, but not the CC Media Encoder!!
Expected results: Media Encoder CC WORKING. This is still my expected result as a paying customer!
My steps to solve these problems (with Adobe's help) were / are:
- Cleant every suggested media cashes.
- Tried to render the sequences also without audio.
- Tried to render as one pass.
- Even if I try just to export ONE simple standard SONY PMW EX1 mp4 file which should never cause problems it chrashes, also without audio.
- Also if I clean all preferences and caches before, EVERY file type crashes, no matter if I try to export a video or a still picture.
- This is not happening in Adobe AME CS6 with the same files, but in CC!! CS6 still renders reliably with preview, but CC crashes without being able to show any preview.
- Held the Shift key down while starting AME. This should reset preferences and so on...
- Deleted suggested "7.0" directories as described in other forum posts concerning this topic.
- Logged out of my CC account.
- Deinstalled and reinstalled PPro, After Effects, InDesign, Flash, using Adobe Creative Cloud Cleaner Tool. All is the newest version 7.2.
- Set GPU renderer to "Software Only". Some video cards have issues when GPU is set to "OpenCL" or "CUDA".
- Checked updates available for video driver. Latest is installed.
- Turned off "Enable Native Premiere Pro sequence import" in AME prefs.
- AMEEncodingErrorLog.txt doesn't have any content, not a single line.
NOTHING WORKED OR HELPED!
Windows Crash log: WER3A92.tmp.WERInternalMetadata.xml:
<?xml version="1.0" encoding="UTF-16"?>
<WERReportMetadata>
    <OSVersionInformation>
        <WindowsNTVersion>6.1</WindowsNTVersion>
        <Build>7601 Service Pack 1</Build>
        <Product>(0x3): Windows 7 Home Premium</Product>
        <Edition>HomePremium</Edition>
        <BuildString>7601.18247.amd64fre.win7sp1_ ... private data erased here ...</BuildString>
        <Revision>1130</Revision>
        <Flavor>Multiprocessor Free</Flavor>
        <Architecture>X64</Architecture>
        <LCID>1031</LCID>
    </OSVersionInformation>
    <ParentProcessInformation>
        <ParentProcessId>9168</ParentProcessId>
        <ParentProcessPath>C:\Program Files\Adobe\Adobe Media Encoder CC\32\dynamiclinkmanager.exe</ParentProcessPath>
        <ParentProcessCmdLine>"C:\Program Files\Adobe\Adobe Media Encoder CC\32\dynamiclinkmanager.exe"</ParentProcessCmdLine>
    </ParentProcessInformation>
    <ProblemSignatures>
        <EventType>APPCRASH</EventType>
        <Parameter0>Adobe Media Encoder.exe</Parameter0>
        <Parameter1>7.2.0.43</Parameter1>
        <Parameter2>52a18991</Parameter2>
        <Parameter3>libmmd.dll</Parameter3>
        <Parameter4>12.0.12.2</Parameter4>
        <Parameter5>5073ba44</Parameter5>
        <Parameter6>c0000005</Parameter6>
        <Parameter7>00000000000bfd76</Parameter7>
    </ProblemSignatures>
    <DynamicSignatures>
        <Parameter1>6.1.7601.2.1.0.768.3</Parameter1>
        <Parameter2>1031</Parameter2>
        <Parameter22>4c50</Parameter22>
        <Parameter23>4c50fbaed87d7d2a6adc173c5da6a755</Parameter23>
        <Parameter24>28b8</Parameter24>
        <Parameter25>28b834131666732fe13a476b5fa8febe</Parameter25>
    </DynamicSignatures>
    <SystemInformation>
        <MID> ... private data erased here ... </MID>
        <MarkerFile>1043_ASUSTEK_G74SX_V20_WIN7</MarkerFile>
        <SystemManufacturer>ASUSTeK Computer Inc.</SystemManufacturer>
        <SystemProductName>G74Sx</SystemProductName>
        <BIOSVersion>G74Sx.203</BIOSVersion>
    </SystemInformation>
</WERReportMetadata>
Adobe team, I'm at my wits' end now and don't know how to continue. Can you help me?

https://www.youtube.com/watch?v=oJ0hz9JkLgM

When I try to access my original wifi name, I can't.. So I had to create a second one. the first one is still there after resetting numerous times. Any suggestions

when I try to access my original wifi name, I can't.. So I had to create a second one. the first one is still there after resetting numerous times. Any suggestions

Hello Oddsbodkin,
It looks like the creator of Netflix Desktop has a site for the project here:
https://answers.launchpad.net/netflix-desktop/
I would try posting your question there and see if anyone else has encountered this error and has a solution.
Cheers, Patrick

How do I uninstall SyncMate Server, Activity Monitor shows it still there after appzapper uninstall of SyncMate app? Killing in AM proceeds with a SyncMate Server startup again??

How do I uninstall SyncMate Server, Activity Monitor shows it still there after appzapper uninstall of SyncMate app? Killing in AM proceeds with a SyncMate Server startup again??
Mavricks, MacbookPro, typical config of everything and standard business user, no heavy graphics, animation or media editing. MS Office, web apps, etc.
I have the same issue with Logmein, which I installed a trial, uninstalled with appzapper, which I thought does a good job of untangling the components of apps but for these 2 it doesn't. Any help would be greatly appreciated.
Thx,

Usually applications like these have their own uninstallers, either build into the installer ( ! ) itself or as a separate uninstaller app. Check the site of the software provider for instructions.
Here's the instructions for SyncMate: http://wiki.eltima.com/user-guides/syncmate-mac-os/uninstall.html
And LogMeIn: http://help.logmein.com/SelfServiceKnowledgeRenderer?type=FAQ&id=kA030000000DGF1 CAO&kw=

Ive tried almost EVERYTHING and i still cant track my iPod that was recently stolen. Ive called apple been all over the website and still no way of tracking it. What are some other ways!?

Ive tried almost EVERYTHING and i still cant track my iPod that was recently stolen. Ive called apple been all over the website and still no way of tracking it. What are some other ways!?

Only the old fashioned way, like if you lost a wallet or purse.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Ipod stops after each track ends in a playlist?

I have a problem: Suddenly, my ipod stops after each track ends in a playlist. This happens with every playlist and every track, all of which worked fine until this week. All tracks' settings are "yes" on 1) part of a compilation; 2) remember playback position and; 3) skip when shuffling. I have not updated any software or added any new content to my ipod. I imagine that some setting has been switched on or off, but I am unable to identify which one. Please help as these are my audio books! Thanks!
nano 6th gen

Yilofall wrote:
I have an iPod Classic (I am fairly new to the medium) and when playing music the Pod goes smoothly from one song to the next but, when listening to a book (brought in from a CD copied into iTunes) it plays one track and stops.
See below for a link on how to copy a CD into iTunes if you want an Audibook.
I have tried checking the gap less album box (what is that for by the way) but it makes no difference.
If you've heard of Dark Side of The Moon by Pink Floyd then it's used there when you want no break between tracks. Or any DJ mixed continuos play CD. Or some classical music. Take your pick
Third question, can I make a book copied into iTunes an Audiobook? How?
[How to Import Audio CD audiobooks into iTunes|http://aldoblog.com/audiobooks/itunes/importing-audio-cds>
Thank you!
No problem, hang around and read a few posts, there's always plenty to learn in here.
Regards,
Colin R.

Parameter field still editable after setting flag 'PropFlags_NotEditable'?

Hi,
Parameter field still editable after setting flag ‘PropFlags_NotEditable’?
I have defined a step type with a string parameter. (MyParameter). This parameter field has to contain custom generated data, stuffed from a code module.
I want to have ‘MyParameter’ read only for all instances of the step in my sequence.
I have set the property flag ‘PropFlags_NotEditable’ for ‘MyParameter’ in my step type definition, because I want to have this parameter read only in all instances.
When I try to edit ‘MyParameter’ field in an instance of the step in the sequence in the variable pane ‘Step’ - ‘MyParameter’, it still works?
What is wrong here, I suppose this should work?
Best regards

1) Make sure you have show hidden properties turned on in the station options, preferences tab.
2) In your step type expand the variables to the place where the expression is stored for the parameter argument. In the .NET adapter this would be something like the following:TS.SData.Call.Params[0].ArgVal. Right-click on ArgVal and select the Properties menu item.
3) Click on the advanced button and select flags.
4) When the edit flags dialog pops up, click on the Type Flags button.
5) Check the PropFlags_NotEditable flag for the Instance Default Flags section. Click OK on this dialog.
6) If you want the change to effect currently open instances I think checking the "Reset Flags... " checkbox on the edit flags dialog will do this, otherwise this change will only effect new instances of your step type. Press ok on the remaining dialogs.
7) New instances will now not allow editing that value. NOTE: This only works for the sequence editor module panel though. It does not work for the dialog version used by the user-interfaces.
One thing I want to make sure you are aware of for step types is that using a default code module like this has drawbacks versus using postsubsteps. Setting the default code module doesn't keep the user from changing the specification after they insert the step, also updating existing steps if you want to change the prototype is more problematic. You might be better off with a design more like the step types that ship with teststand like the message popup step type (which also ship with source code so you can see how they are implemented) which instead use post-substeps and edit-substeps and instead designate the none adapter for the step type so that the step type can never have a code module. What they do instead is their edit substeps display a dialog that gets the settings/parameters to the operation that the step type performs and stores those as subproperties of the step. Then at runtime the post-substep gets this information and executes the necessary code. Unlike the default code module setting, changing the substeps in a step type automatically effects all existing instances of the step. Changing the code module only effects new instances, and loaded instances if you check the checkbox for that.
Hope this helps,
-Doug
Message Edited by dug9000 on 04-16-2010 09:58 AM

Stopping a recording after each track

I have an odd request...Is there any way to stop a recording after each track? Such that there are three tracks on a recording, after each track I would like the CD to stop. After it has stopped, I would like to be able to push play and move to the next track. That is, I put the CD in the player, push play, the CD plays track 1, and then stops; I push play again, and the CD begins playing track 2, and so on. I have Logic Pro and iTunes, which I have used to create the tracks and compile onto a CD. Using these can I create a CD with these parameters? Any advice would be helpful, and thanks in advance for your time.

Yilofall wrote:
I have an iPod Classic (I am fairly new to the medium) and when playing music the Pod goes smoothly from one song to the next but, when listening to a book (brought in from a CD copied into iTunes) it plays one track and stops.
See below for a link on how to copy a CD into iTunes if you want an Audibook.
I have tried checking the gap less album box (what is that for by the way) but it makes no difference.
If you've heard of Dark Side of The Moon by Pink Floyd then it's used there when you want no break between tracks. Or any DJ mixed continuos play CD. Or some classical music. Take your pick
Third question, can I make a book copied into iTunes an Audiobook? How?
[How to Import Audio CD audiobooks into iTunes|http://aldoblog.com/audiobooks/itunes/importing-audio-cds>
Thank you!
No problem, hang around and read a few posts, there's always plenty to learn in here.
Regards,
Colin R.

My iphone 5 screen is black but touch works and i can screenshot but screen is still black after restore what should I do?

and i can screenshot but screen is still black after restore what should I do, could it be a loose cable in the phone under the metal shield?

Hello Dopeslayer242,
Thank you for providing the details of the issue you are experiencing with your iPhone. I would be concerned too if I only saw a black screen.
I recommend following steps 2-6 below for an issue like this:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on),reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
You can find the full article here:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If you get to step 5, I recommend backing up your iPhone before performing the restore:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M.

Still Latency after Freezing tracks... confused.

Similar Messages

Maybe you are looking for