Stock balances by location
Hi I wonder if you can help. I have ran tcode MB5L which provides me with a list of all stock by material code, providing quantity and value. In order to find out which storage location, I can double click on the items, and it shows the storage location, which is via tcode MMBE. However MMBE is for stock balances by location for individual material codes only. Is there one I can run for all stock balances by storage location?
Perfect - many thanks for the quick response. Points have been awarded.
Similar Messages
-
Dear,
I have a requirement regarding material stock analysis.
For example-I have two stores in a plant.I want to see the stocks as well value of stock on a particular date suppose 25/06/2008 for a particular store.
-If i will use MC.9,it will show the opening balance of the starting of the month & closing balance also,as there is no date option.It will not also show the Stock transfer accounting as no accounting is done for it.
-If i will use MB5B,in this also It will not also show the Stock transfer accounting as no accounting is done for it.
-In MB52,it will show only reciept stock.
So apart from these, is there any Transction in which we can check the detail.Pls guide me.
Regards,
DDHi,
I'm not sure if there is std report in sap, but You can use below table
MBEWH - Stock total with period and year
MSEG - Material Document Detail table
MKPF - Material Document Header table
for ex:- you want to total stock for 25/05/2008 then
take period 05, year 2008 stok from MBEWH, add goods recipt, subtract goods issue stock then you will get particular date total stock
you want to stock for storage location then you consider below tables with period and year
MARDH Storage Location Data for Material
MSLBH Special Stocks with Vendor
MSKAH Sales Order Stock
MSKUH Special Stocks with Customer
MSPRH Project Stock
hope you will understand
Regards,
Sankaran -
What are the list of .stock by storage location
hi, iwant to devlop the report to stock by storage location.give me description about a report to list of .stock by storage location. what are the functional spects for this report, what are the tables and fields we have to used for this report plz give me sample report.
Dear Radha Krishna,
You can either use program RMMMBESTN (from SE38) or TCode MMBE. However, you can copy the above program into a 'Z' program and change the logic if your requirement is not served by the standard report or you want to enhance the same.
Go through standard Reports:
MMBE Stock Overview
MB52 List of Warehouse Stocks on Hand
MB53 Display Plant Stock Availability
MB54 Consignment Stocks
MB5B Stocks for Posting Date
MB5K Stock Consistency Check
MB5L List of Stock Values: Balances
MB5T Stock in transit CC
MB5W List of Stock Values
MBBS Display valuated special stock
MBLB Stocks at Subcontractor
MBSF Release Blocked Stock via Mat. Doc.
MBW1 Special stocks via WWW
MC.1 INVCO: Plant Anal. Selection: Stock
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
MC.H INVCO: Business Area Anal.Sel. Stock
MC.L INVCO: Mat.Group Analysis Sel. Stock
MC.P INVCO: Division Analysis Sel. Stock
MC.T INVCO: Mat.Type Anal.Selection Stock
MC48 INVCO: Anal. of Current Stock Values
MC49 INVCO: Mean Stock Values
MC50 INVCO: Analysis of Dead Stock
MC8M Read Opening Stocks
MCB) INVCO: Long-Term Stock Selection
MCC4 Set Up INVCO Info Structs.from Stock
MCH: RIS: STRPS/Mvmts + Stock - Selection
MCKJ Selection version tree: Stock
MCKR User-spec. sel. vers. tree: Stock
MCNB BW: Initialize Stock Balances
MCSK Call Standard Analyses of Stocks
MD04 Display Stock/Requirements Situation
ME27 Create Stock Transport Order
ME2O SC Stock Monitoring (Vendor)
MF65 Stock Transfer for Reservation
MI35 Batch Input: Post Zero Stock Balance
MIQ1 Batch Input: PhInvDoc. Project Stock
MM73 Special Stocks: Preparation
MM74 Archive Special Stocks
MM75 Display Archive of Special Stocks
MMBE_OLD Stock Overview
MMN1 Create Non-Stock Material &
MS04 Planning Scenario: Stock/Reqmts List
MS29 Calculate Sim. Initial Stock
Tables:
MKPF Header: Material Document
MSEG Document Segment: Material
IKPF Header: Physical Inventory Document
ISEG Physical Inventory Document Items
SBSE Stock Mngmt Levels for Inventory Sampling
SKPF Header Data: Inventory Sampling
SLGH Elements of Stock Population
SSCH Strata of Inventory Sampling
T156 Movement Type
MSKA Sales Order Stock
MSKAH Sales Order Stock: History
MSKU Special Stocks with Customer
MSKUH Special Stocks at Customer: History
MSLB Special Stocks with Vendor
MSLBH Special Stocks at Vendor: History
MSPR Project Stock
MSPRH Project Stock: History
MSSAH Total Sales Order Stocks: History
MSSL Total Special Stocks with Vendor
MSSQ Project Stock Total
MSSQH Total Project Stocks: History
http://goldenink.com/abap/files_in_sap.html
http://www.erpgenie.com/abap/tables.htm
Regards,
Naveen. -
All,
I need to upload every stock balances for a storage location in system .
I am using batch management here .So in material master I am putting shelf life and Minimum remaining shelf life .
So suppose for a material shelf life is 30 days and Min Remaining shelf life 15 days .
I am uploading the initial stock of this material with MB1C (561) .
I need to put Manufacturing date while uploading . So it is giving an error that 'Shortfall of Remaining shelf life days ' .
Most materials is having this problem, because material received months earlier and during cut over I am uploading stocks now .
Please suggest the better way to avoid this error .
regardsHi,
If material are already expired or near expiry then....its the business decision whether this stock should be uploaded in the system or not?
I am not sure about the feseability of this but a work around can be:
Go to MSC2N and change the Date of Manufacture/Expiry dates for that particluar batch. then try to upload, once materials are uploaded, you can again change the dates of manufacturing/expiry through same T Code.
Regards,
Sachin
Regards,
Sachin -
How to ajust stock balance marco in snp?
Dear SAP,
Now, we have created loc-pro hierachy to aggregate demand of location K410 = T661 + T671.
However, the system has only aggregated wrong stock on hand K410 = T661 + T671 not including stock on hand of itself.
Please, tell me how to ajust stock on hand marco?
thanks so much.Hi,
You need to create a stock category group with all stock categories that you would like to consider as available stocks.
Or you can pick a standard group like STK if it contains all categories relevant to your business model.
This stock category group needs to be assigned in the location master SNP tab.
If this does not help, please check the stock balance macro & check if it is active, or it has been tampered with.
Regards,
Ashok -
Handling Consignment Stock at Customer Location
Hi Experts,
Please advise how to handle consignment stock at customer location in SAP B1 2005B, the situation is in this way;
The customer pays for the goods but the delivery is a consignment shipment.
Regards,
ShakeelHi Shakeel,
We handle this in the following way:
(only works well if you do not have too many customers wanting CS)
To summarise
1) Created new BP Account spcificly for CStock for Partner wanting consignment stock.
2) Order for Consignment stock entered on new account, delivered and invoiced (invoice never sent to Customer) but you have a delivery note.
3) Balance on Cstock BP account credited back to 0 but the stock is credited back to a new stock warehouse (e.g. CS001). customer now has stock and you have a record of what has been sent in location CS001
4) Cutomer notifies usage of stock.
5) Manual invoce raised on Actual BP account for consumed stock against warehouse CS001 (warehouse entered on invoice line) we also change payment terms for CS stock invoices.
6) CS0001 Warehouse not been reduced by invoice qty and you have and invoice to send to the consumer.
There are one or two floors in the procedure. eg handling changes in cost of stock.
Happy to send you our procedures is you put an email on your business card.
Thanks,
Mike -
Deleting all stock balances in IM and WM
Looking for some ideas on the topic of deleting all stock balances in a plant in both IM and WM for a project that is occurring currently.
We plan on using transaction MB1C with a 562 movement type, we have configured our WM movement type to create an immediate TO and confirm, search strategies are set up to *** however, when inventory is in multiple bins in the same storage location I get one TO then multiple TR's due to the splitting of inventory among bins which I don't want to get so some strategy is out of whack there.
Second question is to anyone out there that knows of a better way than what I mentioned above. This is a pure purge as the plant(s) will be forever disabled and the data is non important in the system that is being purged.
Thanks
StanThe other options of depleting Inventory is either scrapping- 551 or GI to cost center 202. These would in turn accomplish the same result as 562- not much difference there.
If your stock is stored in mulitple bins then you will have to contend with several transfer orders. -
Opening and closing stock at storage location level
Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
SamuelHi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas -
Opening and closing stock balances
Hi
What report can i use to show the opening and closing stock balances of materials for the last 12 months.
Thanks
VineshYou can view the report in MMBE.
other than this you can try
MBEWH and MARDH
Also follow the link:
Re: op.& closing stock detail in MM
Thanks
Nisha -
Report for Project Stock Balances as on a previous Date
Hi PS Gurus !!
We need to have a Report that gives the Project Stock Balances and Values as on a Past Date. The system gives a Current Status Report, but is there a Report that gives the Values for Past Date. This is a report for the Auditor's Interest.
Secondly, we would also need a Report on the Movement of Project Stock in the past periods. Is this possible ??
Thanx !!
RaviHi Everyone !!
I would once again request all of you to kindly answer to my question, as I need a solution to this urgently.
Thanx & Regards,
Ravi Kumar -
How can we get the stock reports in SAP
VaibhavHi Vaibhav,
Please try MB5L -Stock balance per GL or S_P00_07000139 - Stock card and IMAT Report
Regards,
Polla -
Stock Balances uploading through Mvt type 561
Hello,
We are uploading Stock Balances by T.Code MB1C through Mvt. Type 561. IN FI-MM Integration T.code OBYC, In transaction key "GBB" I have assigned GL Account "Stock Suspense A/c" for BSA. And in transaction key BSX, I've assigned
GL Account "Raw Material". After that when i enter stock balance through T.code MB1C, The document entry generated is as follows;
Posting Key GL Account Amount
89 Raw Material A/c XXXXX
91* Stock Suspense A/c XXXXX
*The posting Key "91" is for COSTS, which i believe is incorrect, so where have i gone wrong? what is the solution?? Please help!!!
Regards
AshwinHi,
I agree with ajay.
I think you want to know how this will effect u r Balnce Sheet. This is only a intermediary account for balance upload. In sap u uplaod u r trial balance in part using different transactions. For this u devide total transactions in gl, materials, ar, ap, assets etc and use different balancing account which in turn in total is having dr= cr as u r trial balance is having dr= cr.
Please revert if any querry -
Hi All
Is there a report one can run to get stock balances by month for the periods that have already passed
Thanks
Vishnuhi
Thanks
is there a report for intsansit stock by month
Vishnu -
Stock report in BW (valuated stock and Storage Location level)
Dear All,
Regards.We got an situation here,
Case 1: R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct "Quantity total Stock" aswell.
Case 2 : R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
1).The BW Stock Report shows the "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the Oss Note (589024)...........
Manythanks
ArunHI,
In Inventory we have two quantity fields given to satisfy the requirement.
Valuated stock Qty - 0VALSTCKQTY
Storage Location qty - 0TOTALSTCK
You can make use of them based on your requirement. Hope this helps for you.
Thanks,
Arun -
Valuated Stocks at Storage location Level
Hi Gurus,
Our client wants to develop a report on Quantity and Value of the Stocks at Storage location level. Is there any standard table/T.code where we can see this? We have tried in the Standard reports too.
We have tried this getting from various tables like MARA,MARC,MARD,s031 & S032. But it is hitting the performance heavily. Please advice if anything can be done on this.
with regards,
SaakithyanRefer this link
http://wiki.sdn.sap.com/wiki/display/ERPSCM/StockTablesandStockTypes
check reports: MC.9 ,S_p00_07000139 also if it fits
Maybe you are looking for
-
On my HP Touchsmart 310 PC how do I increase the inactivity time on the display?
On my HP Touchsmart 310 PC how do I increase the inactivity time on the display? Windows 7, 64-bit
-
i cant get my Appstore to work because it has locked up because i tried to answer my security questions and failed to do it. it wanted verification because it said it was my first time on the App Store but it isn't. (i recently got a new ipad after d
-
Appraisals in Training and Event Management.
My client has the following requirement. An appraiser should be appraising a trainee. A trainee should be appraising an appraiser A trainee should be appraising a business event type. Where should I prepare these appraisals? After a couple of months
-
While updating to to 2.0 my contacts were deleted
my contacts were deleted after i downloaded 2.0.. any one have this problem, if so is there away to get them back. i did not have them backed up as far as i know...any suggestions please...
-
Why is the assests panel disabled when editing css or xml files?
It's immensely annoying. Is there anyway to stop it?