Stock in MD04 is also considering Blocked stock with Unrestricted Use

Hi PP Gurus,
In MD04, the stock which the system is showing also considers Blocked Stock for Planning means stock= Unrestricted Use Stock + Blocked Stock.
We Dont want blocked stcok to be considered.
We are using 01 availabilty check with PP checking rule.
In OPPJ, the check box for Stock-Include Safety Stock is only Checked.
Can anyone Please explain why the system is considering blocked stock for Planning???
Thanks in advance,
Regards,
Rakesh Wade

Hi,
Pls check in OPPQ - Available stock tab - Blocked stock would have been activated and hence the system is considering the Blocked stock also.
This indicator when activated causes blocked stock to be included in the MRP calculation.
The indicator you enable in OPPJ will come into effect only when you carry out an avilability check.
Regards,
Sheik

Similar Messages

  • Block picking from unrestricted use stock when it is in schd. for delivery

    Dear Experts,
    I have 50 units in unrestricted use stock of particular material for a storage location in the plant.  I have made two outbound deliveries for this material.  When I pick 50 units of this material, these 50 units i can see in schd. for delivery and in unrestricted use stock also I can see 50 units  in MMBE.  Now, 50 units are in unrestricted use stock, once again i will be able to do picking of another 50 units of this material from the same storage location. (there is physical variation in stock.)  Now, when i will do pgi for one outbound delivery, the stock from unrestricted use will be debited and system not allow to do pgi for another outbound delivery.  (we don't want to allong negative stock).  Is there any way to block picking of the stock which are in schd. for delivery.  Thanks in advance.

    Maybe you should set proper availability check for your deliveries / materials.
    SPRO > SD > Basic Functions > Availability Check and Transfer of Requirements > Availability Check > Availability Check with ATP Logic or Against Planning
    Here you can carry out of your setings.
    E.g.
    .. > Carry Out Control For Availability Check (transaction OVZ9)
    Here you should set for proper checking group / checking rule combination > "Include deliveries" (V_441V-VBBLP) field should be set.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/744b51546011d1a7020000e829fd11/frameset.htm
    Regards,
    Csaba

  • GR into 'blocked stock'  and GR into ' Goods receipt blocked stock'

    Hellow!
    I am to implement  2 scenarios
    1.  "GR into Goods receipt blocked stock"
    2. 'GR into Blocked stock'
    We use GR via shipment (movement type 101 , stock category ' ' ).
    1 . I have tried to change stock category in delibery but fiels is locked. How could I set 'S' category for blocked stock to recive in 'Blocked stock'
    2. How could I recive into ' Goods receipt blocked stock'?
    Thank you for answers.
    Andrey Garshin.

    Hi Andrey,
    I think the only way to do GR to GR blocked stock is in the GR confirmation from WMS (IDoc SHP_IBDLV_CONFIRM_DECENTRAL if you use DWMS, IDoc MBGMCR or WMMBXY if you don't use DWMS). Assign the movement type (BWART) = 103 in the IDoc. Please note that the stock type would better to be coordinated between the WMS and SAP, i.e. it is the WMS that shall say "I received the goods into the GR blocked stock" and only in such case you will map it into mvt type 103 in SAP.
    For the normal blocked stock, I would suggest you to try setting this in the PO, tab "Delivery". Do it before you create the inb. delivery and see if it helps. If not, then you have the same option as for the GR blocked stock, set the stock type to S in the incoming IDoc.
    BR
    Raf

  • Stock transfer plant to plant into blocked stock

    Dear all,
    is there a away to do plant to plant stock transfer and have the stock go into blocked stock automatically in the destination plant.
    thank you

    If your source plant stock is in unrestricted and your destination plant as blocked.
    Then you can't do it within one movement type.
    Suppose you have stock in plant XXXX in unrestricted and you want to transfer the stock to plant ZZZZ in blocked.
    Then either you have to use 301 for plant to plant first, then 343 unrestricted to blocked or first 343 unrestricted to blocked, the 325 for plant to plant within blocked stock.
    Regards
    Dev

  • How to display the alv report blocks wise with out using the blocked alv

    Hi
    How to display the alv report with out using the blocked alv function module.
    Thanks
    Chinnu

    see this Standard Program
    RPR_ABAP_SOURCE_SCAN

  • Block Stock consider during MRP Run and Stock availibility check

    Dear All,
    I am facing the stock availibility check , Sytem consider the Defective material which is Block in same storage location ,and system not generate the Planned order .
    -Blocked Material stock 100, and requirement 100 then system not generate the planned. Client need the system generate planned order 100 , Because 100 material is defective.
    I have configured the system scope of availibility , Block stock check remove , but problem is not solve.
    Thanks
    Rajesh Tiwari

    Dear ,
    Can you please re-check your MRP plant parametrs in OPPQ wether   you have selected blocked stock( Available Stock tab )  option by chance ?
    Please de-select the same  and re-run MRP.Generally MRP does not consider block stock  in net requirement calcualtion .One more thing  , MRP does material avilablity check as per OMJJ set up ( define availbality chek ) but does not consider the same while doing net requirement calcualtion to generate PR rather it goes down to MRP plant parametrs ( oppq or oppr )
    Hope this is clear
    Regards
    JH
    Edited by: Jiaul Haque on Sep 16, 2010 9:29 AM

  • Able to post Invoice for Blocked stock from quality

    Hi
    I did GR for material against PO for 50 pcs, During QA32 stock posting i posted 30 pcs to Unres. stock(101) and 20 pieces to blocked stock(350) storage locations.
    Now when I am trying to  create  MIRO invoice verification, I am getting all the 50 pcs and available to post also for the entire quantity. How the system is allowing me to carryout Invoice verification for the blocked stock 20 pcs also ???
    It should allow me to process the 30 pcs only which are in unres. stock .
    How do I block the blocked stock from getting invoiced ?
    Please help
    Thanks
    Samuel

    Dear Jurgen
    Thanks for the reply,  master does contain the control key, I also have the inpsection set_up for the materials. During PO in delivery tab at item level I am getting stock type as Quality Inspection. During GR, lot is getting generated and we are able to Stock post it using QA11. Every thing works fine till the stock is there in Quality till the run of Txn QA11. But once stock is out of quality we are having the issue for the stock posted to blocked, I can understand MIRO picking up Unrestricted Quantity of the Lot but why it is also picking the quantity posted to blocked stock as we do not want to pay the vendor for this stock quanitity till we clear it.
    Is there any normal config setting to stop it form geting picked during MIRO.
    Thanks

  • Quality-Invoicing for Blocked stock

    Hi
    I did GR for material against PO for 50 pcs, During QA32 stock posting i posted 30 pcs to Unres. stock(101) and 20 pieces to blocked stock(350) storage locations.
    Now when I am trying to create MIRO invoice verification, I am getting all the 50 pcs and available to post also for the entire quantity. How the system is allowing me to carryout Invoice verification for the blocked stock 20 pcs also ???
    It should allow me to process the 30 pcs only which are in unres. stock .
    How do I block the blocked stock from getting invoiced ?
    Thanks
    Samuel

    Hi,
    Please use the following badi to have a control on this. Please take a help of your ABAP consultant.
    invoice_update
    Method: Change_at_save. Pls Implement the same, This will not allow to do MIRO for materials in blocked stock.
    Hope this will work you.
    Thanks & Regards
    Kundan Kumar

  • QI07 to change materials to Blocked stock when they exceed shelf life

    I was able to set up the 09 inspection type and run QI07 manually and it did a 344 posting for the materials that where batch managed but not warehouse managed. What do I need to do to make it so the warehouse managed handling units will be changed from unrestricted to blocked stock? 
    Thanks
    Butch

    use  this movment
    343 Transfer posting blocked stock - unrestricted-use stock
    The quantity is transferred from blocked stock to unrestricted-use stock. You can also post the quantity to another storage location.
    Possible special stock indicators:
    E, K, Q
    G.Ganesh Kumar

  • Availablity Check which includes Block Stock

    Hi All,
    I do have a problem with Availability Check.
    For a material the Goods Reciept is made directly into Blocked Stock. Due to this the MRP is not considering the availability of the stock and creating the new PO for the old reqirement.
    I want to know how we can configure the Availability Check so that it can consider the block stock into consideration during MRP run.
    Thanks for the help in advance

    hi,
    To avoid the situation, you need to move the stock to unrestricted use...
    Its correct, if we think logically then if there is req. for the material...then you can never use the block stock for the production etc...so, when the MRP runs, it doesnot consider the block stock...
    Pls trasfer it to the unrestricted use stock..and then run MRP...
    Hope it helps...
    Regards
    Priyanka.P

  • How to move quality blocked stock to unrestricted

    During Quality inspection I have put 2 nos of the items in blocked stock and done no further processing. Do i need to create notification and then transfer the stock to unrestricted.
    Kindly guide with the T-code
    Thanks

    how r u sure that the blocked stock which is showing in mmbe is that stock which u have placed in blocked stock through the inspection lot .
    i had also faced the same error some time back.
    after analysis i found out that the stock which i was thinking was placed to blocked stock thru an inspection lot wasnot the amount showing in mmbe.
    what u can do is proceed all the inspection lot in QM against the material code.
    regards,
    indranil

  • MMBE- 'sales order stock"- blocked stock

    Hi all,
    I have material showing in MMBE under unrestricted use stock  (as sales order stock) and also under blocked stock (as sales order stock). Any ideas on how to move to just unrestriced use?
    Thanks in advance.

    Hi
    If it is in unrestricted sales order stock, you can use 412 E in t.code MB1b and transfer to unrestricted stock. If it is in blocked sales order stock, you need to bring to unrestricted sales order stock 343 E in t.code MB1b and do the above step.
    Regards
    Antony

  • Recurring inspection and blocked stock

    Hi
    - I have activated inspection type 09
    - Batch management is active
    - Next inspection interval is maintained in material master
    - Inspection lots are generated in QA07
    - Batch stock is moved to blocked stock
    Issue:
    When I record the usage decision I want the batch stock to be automatically transferred from blocked stock to unrestricted stock.
    How is this achievable?
    I have searched for function module but I am not sure whether this is correct?
    Please advise!
    Eva Ahrens

    Hi Amol,
    the inspection lot quantity is moved to blocked stock.
    If I run the process with move to QI stock, then the stock posting is working with transfer of inspection lot quantity from QI stock to unrestricted stock.
    The strange thing is also that when using blocked stock during the inspection there is no tab page for stock quantities in the inspection lot.
    But then it seems strange that this option exist - I seem to remember when testing appr. 10 years ago that it was working - perhaps a function module needs to be assigned to the usage decision code? I have looked but not found any suitable one yet.
    I appreciate your help!
    Eva

  • Moving GR Blocked stock to QI Stok

    Hi Gurus
    Is it possible to move the GR blocked stock directly into QI stock ?

    Dear,
    Its correct,
    343 Transfer posting blocked stock - unrestricted-use stock
    The quantity is transferred from blocked stock to unrestricted-use stock. You can also post the quantity to another storage location.
    Possible special stock indicators:
    E, K, Q
    349 Transfer posting from blocked stock to stock in quality inspection
    The quantity is transferred from blocked stock to stock in quality inspection. Here you can transfer the quantity to another storage location.
    Possible special stock indicators:
    E, K, Q
    Regards,
    Syed Hussain.

  • GR blocked stock report(other than MMBE)

    Hi friends,
    do we have any transaction code to check the stock of GR blocked stock?
    i need other than MMBE -this can be used for sinlge material.. i need Gr blocked stock list of all the material of perticular plant.
    in MB52, it is giving blocked stock qty but i need GR blocked stock
    Edited by: Suresh Shenoy on Jun 10, 2008 11:23 AM
    Edited by: Suresh Shenoy on Jun 10, 2008 11:23 AM

    There is no table that hold the GR blocked stock. This blocked stock in MMBE is dynamically calculated.
    from OSS note: 23687;
    The stock overview (transaction MMBE) displays the GR blocked stock. This stock is calculated from the total of all goods receipts for purchase orders into GR blocked stock of this material (movement types 103 and 106) for which the transfer into the own stock or the return delivery to the vendor (movement types 105 and 104) was not yet entered. In this case, only those order items are considered whose goods receipt to the stock is to be posted to the material master.
    Because of this design, reading POs and PO history, it is not available in MB52 as it would create real performance issues.
    Thats why I pointed you directly to the purchasing reports.
    The stock would not be differ from what you get with the WE104 selection.
    An ABAPer can certainly copy the MB52 program and include the calculation logic that is used in MMBE.

Maybe you are looking for

  • Screen won't flip

    I had to change my iPhone today because the earphone jack was not working. Now i noticed that when in safari, the image will not flip horizontally when I flip the iPhone. Is anyone else having this problem or could this be my phone?

  • Nightmare with repaired AUDIO slipping out of sync ???

    I have a concert shot on Sony camcorders 48Khz, and audio recorded to LOGIC PRO 44.1 Khz My workflow is roughly this: 1. Log and Transfer footage into FCP. 2. Arrange the clips into a rough edit on the timeline. 3. Export the camera audio from FCP, a

  • Why does iPhone backup require access to the Internet?

    While syncing my iPhone, iTunes first performed a backup. My firewall reported that the backup phase of the sync required access to the Internet. Why would the backup require access to the internet unless it was sending some information? This makes m

  • ORACLIENT8.DLL Access Violation

    Hi All I am facing a severe problem with ORACLIENT8.DLL driver , sometimes when my database application is running, suddendly it crashes giving error as : Access violation occurred in ORACLIENT8.DLL.I dont know at what instance this error occurs and

  • Show arrow in top JMenu

    The problem is that for top JMenu object there is no way to turn arrow on. Here is simple example: import javax.swing.*; public class A extends JFrame public A()      super("Test");      JMenuBar bar = new JMenuBar();      JMenu menu = new JMenu("men