Stock relevant inspection lot with return from customer

Dear Gurus,
What settings should I make so that when I make a sales order return from customer, I get a stock relevant inspection lot. What is available for me now is these 2 options:
1. To activate insp. type 06, and upon return, the stock will fall in the returns logic in the storage location, and an inspection lot will be created, but it is not stock relevant.
2. To activate insp. type 05, the stock will fall in the returns logic in the storage location, after that transfer from return to quality using mvt type 457, upon this transfer a stock relevant inp. lot is created.
Both solutions are not suitable for me because for the first option I do not have a stock relevant inp. lot, and for the second option, I loose the refernce to which customer this lot is relevant, and this information is very important for the process.
Regards,
MaX

Hi MaX,
Well I would suggest to with 1st method as this is standard practice.
No doubt you can have option to inward the material for customer returns directly in to quality inspection also. Follow the following steps.
1.     Assign inspection type 05 in material master
2.     Deactivate inspection type 06
3.     Go To transaction VOV6
4.     Double click on appropriate schedule line category that you are using for your return process
5.     Change movement type there to 655. i.e. returns to quality inspection stock
6.     Run a cycle. As a result of this stock will be posted to QI with stock relevant  inspection lot
7.     You can record results and post stock with UD as in normal case of GR.
8.     Do not forget to check the effect of accounting and controlling document for this movement with your FI consultant.
Regards,
Anand Rao

Similar Messages

  • Inspection lot with stock tab for sale return from customer.

    Dear,
    In our organization there are two scenarios,
    1)     Make to order- Strategy group -20
    2)     Make to stock- Strategy group -10
    I have maintained 05 inspection types in QM view for sale return inspection from customer.
    1) In make to order scenario Inspection lot created with inspection stock tab which is OK.
    2) But in make stock scenario no inspection lot is generated.
        Remember I donu2019t want inspection lot without inspection stock tab as per insp. type-06
    So please suggest me, what can I do for getting inspection lot with stock tab for make to stock scenario.
    Regards
    Shabbir Kureshi

    Hi
    QCC0>Quality inspection>Inspection lot creation>Inspection for shipping>Assign Inspection Lot Origin to Delivery Type-->aganist delivery type Enter 05 inspection lot origine
    Also in OMJJ check whether QM in active for mnt type 651
    Regards
    Sujit

  • Inspection lot with 01 origin for stock transfer (Intra company STO)?

    Hi Sap Gurus,
    As per standard SAP configuration for 101 movement type, 08 is the inspection type used for stock transfers (Intra company STO). But, there is a requirement from business to use 01 for Intra STO. Is it possible to get an inspection lot with 01 origin while GR to the delivery created for Intra STO ( Stock transfer B/n plants from same company code)?.
    Thanks in advance
    Venkat V

    Hi All,
    Thanks for your replies..
    Its STO Purchase order between two plants under same company code. System triggers movement type 101 with movement indicator B - Goods movement for Purchase order and Receipt indicator X - Stock transport order. Here system expects inspection lot origin 08 as per standard SAP configuration(OMJJ).
    I just wanted to check, is it possible to get inspection lot from 01 origin for this type of stock transfers. If anyone who worked on this area, please share your inputs. 
    Thanks in advance
    Venkat V

  • Inspection Lot with Zero stock posting qty

    Dear QM Consultants,
    We have come across following scenario,
    1.     Repetitive manufacturing
    2.     Material has inspection type 04 and Z04. Preferred inspection type is not ticked. Z04 inspection type has been assigned to inspection lot 04.
    3.     Production GR done by 131 movement
    4.     Inspection lot generated with reference to 131 movement type. Lot for inspection type 04 is created.
    5.     Inspection lot qty in QA32 it shows correctly as that of GR qty.
    6.     But when we click on UD, in stock posting tab, qty to be posted it shows as ZERO. So no qty is available for stock posting.
    Has anybody came across such scenario? Is this any bug? Any SAP note for this?
    Best Regards,
    Anand Rao

    Dear Sujit, Thanks for so prompt reply,
    Basically this is a complex case,
    1.     See we have set Posting Proposal in Usage Decision as u2018To unrestricted useu2019 in selected sets for usage decision. That means we need not every time go to stock posting tab. The moment we select ACC UD code it automatically posts the stock to unrestricted use.
    2.     Now, what has happed, by 131 movement declaration, backflush happened with 261 movement for child parts.
    3.     Inspection lots with inspection type 04 were created. (Here we did not note whether the stock was posted in quality inspection or in unrestricted use)
    4.     Now the requirement is to cancel 131 movement document. Kindly note UD were not given up to this moment.
    5.     Now through MFBF, user did document specific reversal. As a result of which and as per my knowledge 132 movement should happen and 262 should also happen. At the same time inspection lot status should be set to LTCA. But in actual case 132 movement happened and 262 did not. Surprisingly inspection lot did not set to LTCA status. It remained in REL mode only.
    6.     After this document specific reversal, user gave UD to these inspection lots without noticing where the stock was lying.(in unrestricted or in quality inspection). So the lot status set to UD   ICCO SPCO STUP after giving usage decision.
    7.     Now while doing reverse engineering that why 262 movement did not happen, we came to know that no 321 movement happened for the inspection lots which were generated with reference 131 movement document
    8.     Also, qty to be posted it shows ZERO as explained in my earlier post.
    9.     When we display 132 movement document through MIGO, in where tab it shows stock type as Quality inspection. That means stock was lifted from QI for 132 movement.
    In short  it cannot be predicted where the stock was actually posted whether in QI or in unrestricted use. But yes the post to inspection stock tick has been ticked in material master.
    Can you help further in this regard?
    Best Regards
    Anand Rao

  • Movement type 453 (Transfer posting to own stock from returns from customer

    Hi all,
    I have problem in goods movement type 453 (Transfer posting to own stock from returns from customer)
    it picking from from profit center from in material master under  sales:general/plant tab   but we need picking from based on account assignment group  in the material maser sales org.2.
    Other movement types are picking from based on account assignment group only . for that what i can do please help me on this.
    K.Satish

    Hi,
    In Co controlling are the automatic account assignment is only the default and it on the Priority.
    if you think what is picked up from the mm is wrong.
    the best way out will be to go with the substitution  rule.
    based on the movement type use the rule.
    hope this is clear , assign points.
    With regards
    Krishna

  • Return from customer to unrestricted stock

    Dear Expert,
    is there is a way to make the return from the customer from return order to be back to unrestricted stock

    Hi,
    No, you can't make the return from customer to the unrestricted stock directly! At least the returned stock must go to the return stock, this is the standard process. After confirmation with quality departement, you can decide the returned stock goes to unrestricted stock, block stock or srcap directly! That's it!
    Good day
    Tao

  • Inspection lot with Production Order

    Hi friends,
    I am PP consultant and need some help in setting up a scanario of Production order with inspection lot.
    I need to setup a scenario where a inpspection lot is created from production order manually (not at the time of release). The purpose is to post few quantity of production order to scrap storage location. Inspection lot needs to be created only in certain production orders where some of the quantity has to be declared as scrap and that needs to be rejected with usage decision.
    can any one please suggest the overview of such scenario.
    Regards,
    Rohit

    Dear Rohit,
    You want to create a manual inspection lot only for the purpose of Scrapping and also want it to be done with Usage Decision.
    You can not use inspection type 89, as it is not stock relevant (Inspection type for Miscellaneous inspection),
    There is one another solution with inspection type 08( inspection for Material Movement), but it might look Lengthy.
    1. Release a Production order. say 100 qty.
    2. If during process, 10 is scrap, then perform Partial Confirmation of 10 Qty.;  Stock will be in Unrestricted.
    3. Now, through MB1B, transfer 10 qty from Unrestricted to QI.
    4. As you have inspection type 08 active, System will create an Inspection lot for 10 Qty.
    5. You can post this whole 10 qty to Scrap while giving Usage Decision.
    I think, in your process, Scrapping is not done frequently, that is why you do not want inspection lot at every production order.
    in that case this solution may solve your problem.
    regards,
    Amol
    Edited by: Amolbook on Jan 12, 2012 3:13 PM

  • Cancellation of Inspection Lot with Status LOLK

    Lot with Origin 08 has the status "ICCO SPCO BRRQ LOLK". Stock has been scrapped through movement type 713 from the quality inspection area but the lot is still is displaying in QA32.
    When we are trying to remove the status LOLK through QA12 system is not allowing to enter into screen and giving message "This function cannot be carried out."
    How to cancel or remove this lot?

    Hi,
    status LOLK means Lot locked for batch record
    So go to QA32 and select the relevant inspection lot and go to the Usage decision tab.
    Click the menu bar " Usage Decision" and go to
    Functions-block for batch record---deselect
    Then save the lot and come again  to functions--- cancel the lot.
    By doing this you can cancel your lot
    How to cancel or remove this lot?
    Hope your problem will sorted out
    Give a try and confirm
    Regards
    Hari

  • QC upon Return from customer

    Hello everyone,
    I had an issue regarding performing quality check upon returing delivery. Let me explain the situation.
    My sales happen from  Plant 2 (it is not the manufacturing plant or the plant wher QC happens) Manufacturing and QC happens in Plant 1. Upon return from customer, The return material arrives at Plant2. No QC takes place here. The returned material is transported back to Plant 1 where QC takes place and finally UD takes place
    Am finding it hard to map this scenario. Coz, if i have the corresponding inspection type(06:Inspection for returns from customer) in plant 2 then inspection lot is generated in plant2. Whereas no inspection takes place here but in plant1.
    So please suggest a solution to this.
    Any help would be appreciated.
    Sincerely,
    Aji

    Hello There,
    Thank you for your replies but still the issue cant be resolved as such. I cannot have Delivery at Plant1 because actually delivery is happening at plant 2(Distribution Plant) and accordingly return delivery is also occuring here. So this solution is not feasible.
    Sujith I agree, you can create a manual inspection lot upon return. But since QC is not performed where Return delivery is actually taking place, there is no point raising an inspection lot at that plant. Moreover upon return, the quantity goes to "Return" Stock. This has then to be trasferred to the manufacturing plant/QC plant. So what i do is,  to transfer the material to return stock of the QC plant. Here, how can i raise a inspection lot for qty which has been stock transferred ( to "Return stocK") in the QC plant?
    Any suggestion is greatly appreciated.
    Sincerely,
    Aji

  • Creation of Recurring Inspection Lots with Serial numbers

    Hello,
    We have the following scenario at our client :
    <i>MIGO_GR</i> is used to create GR for materials with Serial number requirement. The serial numbers can be generated automatically or manually entered on the screen. At this point of time, the Shelf Life expiry date & Next Inspection date are calculated based upon the Production date. The Batch gets created with Next Inspection date, Inspection Lots are created and the Serial numbers are assigned by the system. The stock moves into QI.
    The stock is moved from Quality restricted to Unrestricted stock via <i>QA11</i>. The serial numbers are handled by the system or can be managed on screen.
    Transaction <i>QA07</i> (Deadline Monitoring of Batches) is used to create Recurring Inspection. QA07 gives error message IO304 that "<b>Only 0 serial numbers entered instead of 1</b>". The problem is that system doesn't pick up the corresponding serial numbers.
    OSS # <u>497845</u> mentions that Transaction QA07 can not handle serial number. The serial numbers are very critical to the business process.
    Has anyone come across this situation before ? Please suggest solution or workaround. I tried using BAdI "<b>INSPECTIONLOT_UPDATE</b>" & was able to create Inspection Lots with serial number assignment, also manipulated Batch to change the Next Inspection date. The problem is Material Movement (322) Document does NOT get created.
    Also tried implementing BAdI as per OSS # <u>608830</u> but doesn't give desired results.
    Any help is greatly appreciated.
    Best Regards,
    Homiar Kalwachwala.

    Hello all,
    Just wanted to bring this on top to be noticed.
    Would appreciate any help, suggestions...
    Regards,
    Homiar.

  • How to create COGSuFF0Cwhen goods was returned from customer

    Hi,
        goods which deliveried from nonvaluated sales order stock was returned from customer and reduce revenue and AR.
    so, we need do following process：
        create returned sales order〉delivery note and goods receipted-〉billing
      the goods can be receipted in sales order stock ,and can be invoiced .
    but how to create COGS  with returened sales order for nonvaluated sales order stock?

    Hi
      T-CODE :MR21 ，It is used to change the standard price ，we are in the environment that make to order with nonvaluated sales order stock ，so donu2019t need do standard coting .
    I konw : With a nonvaluated sales order stock, inventory changes are not reflected in Financial Accounting. The sales order stock is settled to Financial Accounting only after results analysis and settlement of the calculated values (results analysis data) .
      for normal process , if billing was created ,then do results analysis and settlement of the calculated values ,COGS will be post in financial accounting
      for returen prcoess :
      1. created returen sales order and referenced origin billing document.
       2. create delivery note and goods receipted in sales order stock which was deliveried to customer stock
      3. create billing document and revenue posted in financial accounting
       4. do results analysis with returen sales order ,the system show error message:               W     KJ     816     No object was selected
         when used the orign sales order to do results analysis ,but without any change to save !
    how to post COGS in financial accounting ,when goods was return from cusromer in the environment that make to order with nonvaluated sales order stock ?

  • Third party returns from customer to vendor (Urgent)

    Hi,
    We have an urgent requirement regarding an issue with third party returns from customer.
    The scenario required is as follows :
    When the customer returns the goods in Third party proccess the goods should be directly returned to the vendor instead of receiving into our plant .
    How can we map this bussiness proccess?
    Currently the returns are handled as per the standard SAP proccess ie.,
    Customer returns the goods> Return order is created>Return delivery created (PGR)>Credit memo created.
    In this case we are receiving goods into our plant .

    Hi Shrikant
    1. If delivery of goods is the only issue then you can ask customer to make invoice with Invoice to your company address and Delivery address as the vendor address. Practically it is possible.
    2. Then you can make corresponding entries in SAP and regularise it.
    Thnx
    Nilesh

  • Manual inspection lot with out specification

    Hi gurus,
                    can anybody  give me an example for Manual inspection lot with out specification?
    regards,
    sbabu

    Hi,
    Actually it is not useful in manual inspection lot because manual inspection lot used to check your quality of material at  any movement.
    Means for example your raw material is in store department but some time you suspect something about quality & you take decision to check quality of material that time it can be used.  So in this case result record is mandatary,
    Because your intention to create lot to checked material so not use ful without specification .
    Also not any posting happening through  this lot.just to check the material at any instance.
    For any further clarification revert me back.
    Some time client want to create lot but do not want to take results for that just they are interested in giving
    UD & stock posting in that case you can remove tick task list required .This requirement mostly demanded for certain Engg items they do not want go material directly to unrestricted. it will go through UD.
    But manual inspection lot I do not think it much useful.
    Regards
    SANIL

  • Want to do mass processing for inspection lots with status SPRQ

    Hello,
    My company using early lot creation for 04 inspection type. We have thousands of inspection lots with status "UD   ICCO SPRQ PRII PRSI STUP". Now due to SPRQ status, system is not closing process orders associated with thousands of inspection lots.
    Is there any transaction where I can do mass processing of inspection lots to change the status "SPCO" from "SPRQ"?
    Thanks
    Bhavesh

    Dear Bhavesh
    You may have to modify the standard program to do so. Modify this program RQEVAI30.
    This can help you
    Regards
    gajesh

  • Can I know what is the process for us to do Good Return from customer?

    Can I know what is the process for us to do Good Return from customer?

    hi
    this ques need to be posted in sd forum..
    to answer this u can use order type RE to create Return order and then u can do the goods receipt..
    or u can use the process mentioned in first reply.
    regards
    CMM

Maybe you are looking for