Strange display issues for previously healthy SWFs

Many months ago I published SWFs via Xcelsius 2008 that were carefully tested and worked well.  This week, it came to my attention that these SWFs are now displaying strangely under a variety of browsers and Flash Player versions (latest version tested was FP 9).
Symptoms of the problem include, as far as I can tell from just looking at the SWF, dynamic visibility not being respected and transparent objects losing their transparency.  Hence, objects that are supposed to be hidden behind other objects, or objects that are not supposed to display, are doing the opposite.
The SWFs worked exactly as designed from last September up until this month, at some point.  Has anyone else noticed anything like this?
I'm still trying to work out how I should go about root-causing this issue.

Hi,
I have this sort of issue not with swf but With XLF  i have lost Complete Data in my XLF .The data tabs that were used to map the components were completly lost.So i always mantain backups at multiple locations which saved Me.
My suggestion would be here is Generate a new swf which was wokrking propelry last time.I think this will be fine..But the Symptons you are talking about it Quite strange and needs to look at it...
Can really understand what would be the reason for this.

Similar Messages

  • SAP XI runtime workbench doesnot display data for previous months

    Hi,
    We are experiencing an issue in our XI system. When we try to extract messages from the Integration engine we recieve data only for two months including the present month and not for previous months.
    Can you pleaes suggest which SAP job or any set parameter is creating such a scenario.
    Thanks in advance and suggestion are welcome.
    Regards,
    Subhram

    You should check the archiving/deletion jobs in the PI Admin Check guide..
    Kind regards,
    Mark

  • How to display Issues for the projects which user can view in the Project Center View

    Hello All,
    In the project center view, at the bottom, we need to add one table, which can show the Issues for the projects that are displayed in the project center view.(Projects visible to the current user).
    Example: A resource 1  can see the Projects Project 1, Project 2,Project 3 in the project center view. So resource 1 should be able to see all the issues that are entered against the Project 1, Project 2, Project 3, irrespective of the issue that has
    been assigned to any resource.
    Please help.

    Hi,
    You could simply edit the page and add the risks and issues webparts. This will display risks and issues assigned to the user.
    Click on edit page, then add webpart. In the Project We App section, pick up the risk webpart and then the issue webpart. Finally drag them to the bottom of the page and close the page.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Strange Color issue for my display (blue - purple tint)

    hi guys,
    I have a white macbook.
    Recently, I realize some color issue on displaying blue.
    check this picture below (I uploaded to my flickr)
    and when it occurs I can only restart my computer, sometimes it changes back to normal...
    or I can just use an external screen to ignore this problem (which I am doing it now)
    anyone have any ideas?

    I fixed it by going back into each diffuse texture and choosing "Edit UV Properties" and hitting OK - this seem to reset and re-render each texture.
    Seems like a bug unless you can't use Image Size on documents that contain 3D layers maybe?

  • Payslip display issue for retro periods of a wage type

    Hi,
    we have an issue with payslip display for the rate field of an wage type.
    we are genaearting the amount of a wage type 2000 using T511K constant. and we have changed the Rate of this constant in the mid of pay period.
    if we have split in WPBP then we are getting payslip display for old and new rate. which is fine.
    however if we don't have WPBP split for retro periods then payslip is clubbing the old and new rates hence the diaplay is wrong.
    ex: wrong dispaly for retro periods (08/2009 one record with RTE as 6 and for 09,2009 another record with RTE as 6)
    wage type          rate             number      amonut
    2000                   12                2                12      (rate should be 6 however it is diaplaying 12 as taking rate of 08 & 09,2009         periods where it is comg as 6+6=12 which is wrong)
    right dispaly should be
    wage type          rate             number      amonut
    2000                    6                   2                12      (rate should be 6, i.e 6*2=12)
    Thanks
    Gayathri

    Hi Gayatri,
    First check the values in payroll log or RT table. If its displaying correctly in RT table and if its problem with Payslip, then ask the abaper to debug the program.
    Also check the WPBP table in RT table, because as you told that if there are any changes in the mid of the month, then the amount may split.
    And if you have written any PCR for this, then check the PCR, whether its overwriting with any values.
    Just check the above points.
    Thanks & Regards
    Bharathi

  • Display issue for xRPM CAPACITY MANAGEMENT  report on EP

    Experts,
    I am using xRPM 4.2 version. My BW is on release 700 with patch level 15 & EP on 7.0
    I am tring to view the various reports uder capacity management on EP.
    These reports are viewable correctly in BIW system but not able to display the same on EP.
    I am new to this and seeking for proper guidance to resolve the issue.
    Thanks,
    xRPM consultant

    Resolved

  • Calendar display issues for "All Day Events" coming from Exchange Server

    My problem is with the display of All Day events. I'm running a 3gs, Outlook 2007 on winxp, connected to a Exchange 2007 server. When an all day event is put in for multiple days the phone calendar displays it as starting at midnight going to midnight, and sometimes wont display the event on the list view on the phone. I can correct the display by editing it on the phone and making it all day there, but then the category I assigned the event in outlook goes away in outlook. All day single day events work just fine. Any suggestions?

    Sort of same issue:
    All day events scheduled from Entourage display incorrectly on iPhone/iPad as non-all-day events (which block out entire day/multiple days)
    All day events scheduled from iPhone/iPad show up correctly in Entourage as all-day events, but incorrectly with an *extra day* added.

  • Strange display issue

    I updated to Leopard 10.5.6 two weeks ago from Tiger 10.4.12. Almost immediately, I started seeing horizontal lines on my screen, especially in Safari. I hoped updating to 10.5.7 would fix this. It doesn't happen nearly as often, but it still happens.
    I also was having the freeze up problem mentioned in another thread. I repaired permissions and haven't had a screen freeze since, but now have a whole new problem. I'm noticing sometimes when I'm watching videos and occasionally even when I'm just scrolling down my browser, for literally a second or less I'll see something that looks like a tear in my screen, like the screen literally developed a rip in it and peeled apart. It's not a continuous or predictable problem, just a nuisance--especially considering none of these things happened when I was running Tiger.
    The graphics engine in this Mac is an ATI Radeon X1600. Are there updated drivers I need to download to stop these things from happening? Or is there something else I'm missing? I've run Disk Utility on my hard drive and it shows no issues.

    Go to the Apple menu, and select About This Mac. Go to More Info. In the right of the view, you should see your serial number. Google "Mac Serial Number Identification" or something along those lines. (You could also try Googling "Mac Serial Number" and then your specific serial number). Check out your system. I recall that there was a batch of Core Duo iMacs with bad displays with about the same hardware as you claim.
    Anyway, here's something to try (you'll have to be really vigilant):
    Taking a screenshot involves pressing the Command-Shift-3 key for full screen, and Command-Shift-4 to select a specific area. The next time you get a tear or lines, (especially the tear), hit the Command-Shift-3 combo immediately. Assuming that you actually hit it and a screenshot was grabbed while the tear was still there, go to your Desktop. The screenshot will be called Picture <some number or other>.png. Look at the image. Do you see the tear? If you see it in the image, it is probably a software error, as the screenshot is capturing the "wrong" image that your graphics card is sending to your display. If you do not see the tear, chances are it is because it is a problem with your display malfunctioning, or the hardware not "knowing" what it is "sending" to your display.
    Actually, there is a chance that the reverse is true, but for the most part (>80%) of the time, the above is true. If someone wishes to correct that, feel free.

  • Display Option For Previous 15" Unibody??

    To start, I am not asking for advice on glossy vs matte. However, I prefer matte and would like to purchase the new 15" unibody MBP. I can decide to wait it out and see if Apple announces a matte option for the 15" MBP within the next few months or bite the bullet and get the glossy display.
    *I could not find this information but did the previous 15" MBP Unibody have an option for matte finish (model previous to the WWDC update)?*
    My thinking is that if there was an option, there is a chance they will introduce a matte option with the new 15" MBP unibody. If they did not have an option, I do not see them introducing a matte finish anytime in the near future.
    Thanks

    The previous unibody 15" MacBook Pro, launched in October 2008, didn't have a matte option. It had a glossy glass screen.
    The new 15" MacBook Pros, launched in June 2009, still don't have a matte screen option.

  • Strange display issue on my Qosmio E15-Av101

    Hello all,
    Strange problem... picked up this E15-AV101, with 1Gb of ram and a 100Gb HDD have wiped it and started fresh with the Qosmio player disc and then the Recovery disc.
    All works fine in windows... but if the system is off and I try to use the qosmio player by pressing the tv button or the button next to it a white screen comes up that disapates to black with green and red lines, but i can hear the dvd playing and the controls operate.
    What would be causing this as all works fine in windows when I start Media Center.
    Running bios ver. 1.60 and all the latest drivers from the site
    I hope someone has some insight into this as I am stumped
    Thanks for all and any help you may offer
    Mark

    Hi there,
    thats not a official support forum like you thought. Its a user-to-user forum where (like I already mentioned) users try to help another users.
    If you want full support then contact a local servicepartner or call the toshiba hotline.
    bye

  • Unit display issue for MDX

    Hi,
    Following is the issue what I face.
    I issue a MDX query against an infocube. There is a calculated measure in the MDX query whose calculation is in the MDX statement itself(e.g. sales value/sales quantity). The result shows the unit of the calculated measure as "EUR KG" rather than "EUR/KG".
    If I issue the MDX query against the query built on the same cube(the calculation of the keyfigure is in the bex query this time and not in the MDX statement) I get the proper unit as EUR/KG.
    Can anybody suggest how the units can properly be displayed when queried directly against the cube?
    Thanks,
    Anurag.

    Resolved

  • Display Issues for Yogapad 13

    Recentluy I upgraded my windows version to 8.1. Mine is Yogapad 13 Inch. From then on all the games that used to work on a full screen before the update are now displayed in a small portion which is the size of 1/4th of the screen size at the center of screen. I tried to install the drivers again but the problem is not yet fixed. I am facing this problem with all most every games like AOE, Counter Strike, NFS Most Wanted etc., I had also tried the game settings also to change screen resolution etc., but none worked. Plz help me how to solve this issue.
    Thanks in advance

    Sort of same issue:
    All day events scheduled from Entourage display incorrectly on iPhone/iPad as non-all-day events (which block out entire day/multiple days)
    All day events scheduled from iPhone/iPad show up correctly in Entourage as all-day events, but incorrectly with an *extra day* added.

  • Mac Pro 2009. Strange Display issue.

    I have a very weird problem. After having problems setting up a dual screen setup between my Dell 2707 monitor and a Mitsubishi HC3800, I got the following setup working: Dell hooked up via MDP output with adapter to DVI and Mitsubishi hooked up via DVI output to HDMI.
    Signal to dell started having problems, screen would go black for a few seconds and come back. Projector worked OK.
    Tried switching Dell to the DVI port and I couldnt make it work(It DID work before I set up the dual screen setup). Tried to go back to MDP port and it wouldnt work either! right now I am using the dell thru the DVI using a DVI to VGA adapter and it works ok(some noise maybe the cable)
    Current situation: Projector works perfectly out of the DVI port. Does NOT work thru the MDP.
    Dell monitor ONLY works out of the DVI port if using VGA adapter and cable. Cannot get a DVI signal to be recognized.
    tested monitor with other computer and recognizes its DVI signal perfectly.
    Switched DVI cables.
    Going crazy trying things out, to no avail
    help!

    Mini DisplayPort is not just a different kind of DVI. It is a completely different protocol. You can ask Mini DisplayPort to assert signals SIMILAR TO Single-Link DVI by using an adapter that asserts a signal back toward the computer Interface requesting "DVI-like" output.
    If it works that way with a modest adapter such as the Apple Single-Link DVI adapter, consider yourself lucky. All Others will need an ACTIVE POWERED adapter.
    If your needs are modest (screen width under 1920 wide) you may be able to get by with a third party ACTIVE single-Link adapter, (current leader is about US$40 on Amazon). Otherwise, the Apple Dual Link adapter (with USB cable to get even more power) or similarly-priced third party adapter may be required.
    In my opinion, the Apple Mini DisplayPort to Single-Link DVI adapter should be withdrawn from the market as inadequate.

  • Qosmio G50-10h - strange display issues

    My Qosmio G50 was running less brightly for a few months, then experienced intermittent fault whereby Qosmio logo would show on the screen, then the windows logo for a split second, then the screen would black-out completely. Restarting or hitting function f5 might resolve the situation. Now the problem has become permanent. I cannot get the screen working other than to show the qosmio logo, then a bit of the windows start up, then black-out.
    I have been through the maintenance manual and options are Inverter? Screen? fluoro? System board? That is the question... Without all the spares, it's difficult to determine what is the cause... I Have an inverter on order but they have sent two wrong parts and when the right one does eventually arrive i am not sure that's going to cure the problems
    Really need to use the computer. Your thoughts and assistance will be greatly appreciated
    Kind regards
    Simon Riley
    (ironysmile)

    Macius, thanks for your thoughts...
    I tried f8 at start (don't know how to do the bios thing)... The f8 resulted in a black screen which I was able to flip into working for a second by pressing fn f5 twice (switch screens and backs again)... This cause a slight fizzing noise from the area of the inverted and then blackout again... Did this a few times as start up took place and then it stopped working and was irretrievably blacked out
    Does this help narrow down the search any further?
    Simon

  • Multi User Calendar Display Issue

    When we moved to GW2012 one of our departments that uses a Multi User calendar (5 users in total) noticed some strange display issues.
    When User1 is looking at her Multi User Calendar, the client is displaying her appointments in User2's column as well. But if you look at User2's Multi User calendar, you don't see any of User1's appointments in User2's column, so it appears to be a display issue with User1. This same issue is happening with one other user.
    All users are on Client 12.0.2, Build 108211 . Interestingly if we look at the calendar on a machine running the GW8 client this display issue does not occur. I have also gone as far as rebuilding the calendar from scratch but this hasn't changed anything.
    Any suggestions?
    Thanks!
    Steve

    Hi
    If you open a Service Request with Novell Technical Services you will receive this Field Test File patch for the GroupWise 2012 Client. It is specifically to fix issues with multi-user calenders. Please let us know if you are in a position to open an SR.
    Many thanks.
    Cheers,

Maybe you are looking for