Strange TREX behavior: Document search only shows 15 results

Hi.
I've one TREX implementation. It's connected to a SAP eLearning repository in a Portal and no matter what search criteria I use, it always returns me a list of 15 found resutls!
It's always the same number, for different searchs, and of course I've checked that there are more than 15 right resutls, so it looks to me like a parameter restriction or something like this, but I still havent found it.
Do any of you know what could be causing this??
Any help would be really really appreciated.
Thanks in advance and regards!!!

Hi Armando,
the reason that the portal shows every time only 15 results can depend on the used KM Layout Set.
Within the KM layout Set which is assigned to the search result iView you can specify the number of rows and whether a page link sould appear or not.
Normally the default Layout Set should work properly.
But you can as well use the search command in the standalone tool TREX-Admin. Here you can see the number of results as well.
Best regards
Frank

Similar Messages

IC Webclient: document search not showing documents for contacts

Hi,
I am working with SAP CRM 4.0, SP7.
I have created an account(a001) with three contacts(c001, c002, c003). I have attached a document(d001) to account a001 and two documents(d002, d003) to contact c001.
Now when I open the IC-Web client UI and go to 'Identify Account' and enter a001 in the Account ID and do a search account, I see three contacts(c001, c002, c003) in the result list of account. When I click in the contact(c001) and go to 'Document Search', it shows only documents attached to a001 and there is no way I can see the documents attached to c001.
Can anyone please let me know, how do I see the documents attached to contact c001 in this case?
Please note that if I enter c001 in the Account ID of 'Identify Account' and then go to 'Document Search', then it shows me the documents d002 and d003. But, I want to see the contacts documents entering from accounts.
Thanks in advance,
Kunal

Hello Hari,
Sorry for the delayed Response, will check this BADI and if it helps then I will update this thread
Thanks
Chandu

The search only shows my library - no store. have version 12.0.1.26

The search only shows my library - no store. have version 12.0.1.26. Once I upgraded the search itunes store disappeared. Any ideas?

What are you viewing when using the search box ? If you are in the store then it should search the store - is that not happening ?

DRQ : Draw Document Wizard only show limited details.

Hi,
I'm not sure is this the correct place to do development request.
I found out that when do Copy from Function (eg. Do Delivery by Via Copy to function), Draw Document Wizard only show limited details. Width , height, length are not shown.
Our customer sells same item (Product Code) with difference size and dimension. It is hard to select the item from the draw document wizard.
Even harder for documents that have a lot document lines with same product code.
Is there any plan for this req in the next upcoming patch?
Please advise.
Andy

Hi Andy
What I understood from your explanation is you have one single item code, but the item has different sizes. So, you are creating multiple lines for same item in base document (sales order/purchase order).
My question is to you, how are you capturing the sizes in the document. Have you created any UDF to capture the sizes.
If your answer is 'Yes', then, you can include those UDFs in Draw Document Wizard -> Select Item to Copy (through Form Settings). Also you can drag & drop those UDFs just beside your Item Code or Description, which will help user to understand the actual size/specification of the Item while drawing the base document into target.
If your answer is 'No', then you can create those required UDFs for Marketing Document -> Rows and store the values in the base document. And while using Draw Document Wizard include those UDFs through Form Settings as explained above.
Thanks & Regards
Anjan Bhowmick

How To Make Search Query Showing the Result As List of Buttons.

Can some one give me an idea how to start to make a Search Query showing the results as list of buttons.. i have already have my buttons with names. i just dont know how to make a search query.
this is my on screen keyboard i made..
im making a system that the result were a list of buttons.. showing like this
This was supposed to be the output of the query that i need to do..
Please help me.. i just need a idea or tips how to make this one.

Here is code I posted recently for another question
Public Class Form1
Const BUTTON_SIZE As Integer = 20
Const SPACE As Integer = 5
Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
Dim buttons As New List(Of List(Of MyRadioButton))
For row = 1 To 6
Dim newRow As New List(Of MyRadioButton)
buttons.Add(newRow)
For col = 1 To 6
Dim button As New MyRadioButton()
button.row = row
button.col = col
button.Height = BUTTON_SIZE
button.Width = BUTTON_SIZE
button.Left = col * (BUTTON_SIZE + SPACE)
button.Top = row * (BUTTON_SIZE + SPACE)
button.Name = String.Format("radGr1{0}_{1}", row.ToString(), col.ToString())
Me.Controls.Add(button)
newRow.Add(button)
AddHandler button.CheckedChanged, AddressOf Radio_Change
Next col
Next row
End Sub
Private Sub Radio_Change(ByVal sender As Object, ByVal e As System.EventArgs)
Dim button As MyRadioButton = CType(sender, MyRadioButton)
Dim row As Integer = button.row
Dim col As Integer = button.col
End Sub
End Class
Public Class MyRadioButton
Inherits RadioButton
Public row As Integer
Public col As Integer
End Class
jdweng

Mailbox auditing log search only shows last 7 days

I have mailbox auditing turned on for a mailbox, and the audit log age limit is set to 90 days. When I run the non admin user access report however it only shows me auditing items for the past 7 days. If i go to powershell, and run search-mailboxauditlog
it shows the same 7 days. Any suggestions?

http://technet.microsoft.com/en-us/library/ff459237(v=exchg.150).aspx
Mailbox audit logs are generated for each mailbox that has mailbox audit logging enabled. Log entries are stored in the Audits subfolder of the audited mailbox Recoverable Items folder. This ensures that all audit logs are available from a single location,
regardless of which client access method was used to access the mailbox or which server or workstation an administrator used to access the mailbox audit log. If you move a mailbox to another Mailbox server, the mailbox audit logs for that mailbox are also
moved because they're located in the mailbox.
By default, mailbox audit log entries are retained in the mailbox for 90 days and then deleted. You can modify this retention period by using the
AuditLogAgeLimit parameter with the
Set-Mailbox cmdlet. If a mailbox is on In-Place Hold or litigation hold, audit log entries are only retained until the audit log retention period for the mailbox is reached. To retain audit log entries longer, you have to increase the retention period by
changing the value for the AuditLogAgeLimit parameter, or export audit log entries before the retention period is reached.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Outlook 2013 Advances search only shows cached emails

Hi all,
We have rolled out Outlook 2013 with cache mode on, we have set caching to only one month of data. We are using Outlook 365 as our exchange server.
Quick search works as it should and shows all the results. However, advanced find only shows results from the cached emails. IE nothing older than a month. I have run a re-index etc but still have had no joy. Is there something I am missing?
Thanks

Just wanted to say hi and check if there is anything that I can do for you on this problem.If
so, please do not hesitate to let me know and I will be happy to help.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Calendar Search only showing last year's entries

Hello,
If I do a search in the calendar, the results are only shown for the past 12 months or so. How can I get the Iphone (3GS) to show all results? I read about an option in the iPhone settings (calendar) but it's not there.
Any suggestion?
Thanks in advance!!

That may be its limitation, as spotlight searches calendar events in a two-year window. It will reveal results from one year in the past and one year in the future. If an event has recurrences that fall in this range, it will find the event that is closest to the current date.

Search is showing no results with HTTPS URL

Hi All,
A power user wanted to have https entry in one of the content sources and asked us to remove the http entry for the web application. After that I have performed the incremental search.
However, the search on the https on the web site started showing NO results. We have configure search settings on the site as follows:
After that search is able to search but it search for other content sources. In the search service application we have several web applications and we want to scope to that specific web application and users should perform search only in that web application
scope. How could I scope search to a specific web application?
Our document library search is also retuning with no results.
Any suggestion to resolve the issue will be greatly appreciated.
Thanks in advance.
Sandy

Hi Sandy,
I think you have to edit the publick urls, and switch the default zone and intranet zone URLs, set the https as default zone public URL, then start a full crawl in a proper time if it impacts the user on production server, you may also test in a test
environment firstly.
Also there is aother article which should help.
http://ragavj.blogspot.in/2014/09/layouts15osssearchresultsaspx-not.html
https://support.microsoft.com/en-us/kb/2000365?wa=wsignin1.0
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

On Google, Ffox 3.6.12 only shows 10 results even when I specify 100; Mac G4 10.4.11; other browsers show 100 no problem.

On my Mac dual 1.25 GHz Power PC G4 with OS X 10.4.11 and Firefox 3.6.12, when I open Google and specify 100 results like this...
http://www.google.com/advanced_search?hl=en&num=100
...it always just shows 10 results. Whereas Opera and Safari (I don't use Internet Extorter) show 100 results no problem using that same URL.
Problem has being occurring at least since Firefox 3.6.9 if I recall correctly. Not sure if it was happening before that.

Google recently made some changes to the Google search site with the addition of Instant search and that made the setting of the number of results in the Google settings to stop working.
If Instant search is enabled on the [http://www.google.com/preferences?hl=en Google Search settings] page (link at the top right) then you only get 10 results. 
You have to disable instant search and reload the result page and then set the number of results to your preferred choice. 
It may not work if you make both changes at the same time.
There is a link directly to the right of the Google search field on the Google results page. 
That is a button with a drop down list: Instant is On/Off. 
There is also a radio check box on the Google Settings page, that has replaced the previously used Suggestions.
* http://www.google.com/preferences?hl=en

Google Advanced Search only displays 10 Results per page in Firefox 3.6.10

In Google Advanced Search, choose any value for Results per page greater than 10 and do a search. When using Firefox 3.6.10, only 10 results are displayed on each page of results. 10 results per page is the Google default, and the Results per page selection apparently has no effect.
This problem also happens in Google Chrome 6.0.472.63.
The Results per page feature of Google Advanced Search is working properly in other browsers, such as Safari 4.1.2 on a PowerPC Mac and IE 7.0.5730.13 and IE 6.0.2900.5512.xpsp3_gdr.100427-1636 on a PC running Windows XP

Google recently made some changes to the Google search site with the addition of Instant search and that made the setting of the number of results in the Google settings to stop working. 
 
If Instant search is enabled on the [http://www.google.com/preferences?hl=en Google Search settings] page (link at the top right) then you only get 10 results. 
You have to disable instant search and reload the result page and then set the number of results to your preferred choice. 
It may not work if you make both changes at the same time. 
 
There is a link directly to the right of the Google search field on the Google results page. 
That is a button with a drop down list: Instant is On/Off.

Apple 2 tv only shows one result for a tv series search

Only one item is listed when I search for tv shows or movies

One episode? One Season? One show?
Sorry, not quite following what you're issue is.
Do you get the same results with a search in iTunes on a PC/Mac?
AC

Strange iMessage Behavior on WIFI only

Hello Everyone.
So I have noticed this issue for a while and I can't seem to resolve it. I'll start off with a few things.
I have restored the phone completely
Signed out of iMessage and back in
Reset my Network Settings
Nothing seems to resolve the issue. My issue seems to occur ONLY on wifi. My phone will be locked and I'll get an iMessage. It'll show up on my iPad but not on my iPhone. Without opening it on the iPad, I'll unlock my iPhone. As soon as I unlock, the red badge on the Messages App will show the number of messages I have. I will then open the Messages App on my phone and none of the new messages will appear. The only way to make them appear is to close messages, double click the home button and then close out the Messages App and open it back up to see the message. This also happens on my iPad occasionally.
I NEVER have this issue when I'm not connected to wifi. I can't tell if its because of my home network but I'm using a Time Capsule with WPA2 as my security settings.
Anyone have this issue or know how to resolve?

Hello there, Andres_F.
The following Knowledge Base article is great for troubleshooting the issue you're describing:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If the first steps dont help you get taken care of, the section that follows under "If you still can't send or receive iMessages":
If you still can't send or receive iMessages
Ensure that iMessage is turned on in Settings > Messages.
To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
iPhone: Troubleshooting Cellular data
iOS: Troubleshooting Wi-Fi networks and connections
iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
Note: To receive iMessages sent to your phone number on your iPad, iPod touch, or Mac, you must meet the following requirements:
iPad or iPod touch using iOS 6 or a Mac using OS X 10.8.2.
Verify that you are signed in to your Apple ID account on Settings > Messages > Send & Receive.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

How can i get a refined internet search, only show words that are used in search request

Can i get a refined search. For example, show only the words that have been entered in the searchbar

Hi,
You can try putting the word or phrase inside double quotes (" "). I think this would work in most search engines.
[https://support.google.com/websearch/bin/answer.py?hl=en&answer=134479&topic=1221265&ctx=topic Google Search help]
[http://help.yahoo.com/kb/index?locale=en_US&page=content&y=PROD_SRCH&id=SLN2242 Yahoo Search help]
[https://duckduckgo.com/params.html DuckDuckGo help]

Documents search only available for administrator

hello>
I have searched this on SDN but with no avail. I created file system repository, index, and itis working ok.
Administrator users can search on the documents. However, when a no administrator user searches, no matches are found. I assume this is an issue of permissions somewhere, but I cant find where.
I need to understand permissions since afterwards some of the searching will be done in anonymous mode.
Any ideas_
Thanks!
Alejandro

I finally solved this issue, the user mapping for normal users has to include the full DOMAIN/user windows name, and the windows password.
Portal administrators dont need this because the ACL for w2k lists are not checked.
I hope this will help someone with similar issues
Greetings!
Alejandro

Strange TREX behavior: Document search only shows 15 results

Similar Messages

Maybe you are looking for