Strange wandering master level when injecting test tone.

I have just rigged up my macbook with a MOTU 828MKII and a focusrite octopre 8ch MIC amp via ADAT optical.
I can record glitch free per channel and wanted to test stability when recording on all 18 availble channels for 1hr.
So I took a Lindos audio test kit. set it to -10dBu, fed it through a couple of sbs DA's and sent it to every physical input on my setup. I then set each of the mic gains to level out at -10db.
Each channel looks and records fine individually but the 'Main Out 1' gain will creep up to distortion then pull back down again on its own accord. It looks kind of like there is a feedback loop and logic is responding automaticly to prevent it by muting.
Does anybody know if logic does react like this?
I can not see any way that I could be creating a feedback loop here. I have started from a blank project and added the 18 channels myself. there is no complicated bussing. They all lead to Main Out 1. I can see no reason why Main Out 1 should do anything other than stay still.
I also have all inputs and outputs on the MOTU hardware mixer 0'ed so there can be no interference from this.
Anybody encountered anything like this and know how to make it go away? I really need to have a reliable setup for a recording I am doing tomorrow and currently I dont trust it at all!
still, at least it doesn seem to be glitching.
ta,
Rob.

Hi Andrey,
thanks for you reply.
Because this is our productive system I wouldn't like to append 0CALMONTH charateristci to the cube and the aggregation level.
I have SAP_ALL authorization in both (basic BI, and Portal) system, so I don't think this is the problem.
In the query designer there isn't any problem with the master datas of 0FISCPER or 0FISCVARNT charateristics.
I see 'K4' value in 0FISCVARNT, and I see a lot of master data in 0FISCPER.
I think there is a difference between our basic BI system and our Portal system, is it possible?
Best Regards,
Gergely Gombos

Similar Messages

My iPhone 5 stopped ringing. Changing the button on the side doesn't do anything anymore . Also I have no sound on my apps. When I test a ring tone it works, but when I have an incoming call Nothing happens. Can anyone help?

My iPhone 5 stopped ringing. Changing the button on the side doesn't do anything anymore . Also I have no sound on my apps. When I test a ring tone it works, but when I have an incoming call Nothing happens. Can anyone help?

Thx, apple master and stedman but tried all of it and still doesn't ring . I have sound on my videos and YouTube tho. Very strange.

Test AP Tx level when Wlan Surveying

Can ayone confirm what is the industry standard Tx power level for a test AP and when simulating AP for a WLAN survey? I think I read somwhere its 25mW and not 50mW?
Thanks

It depends on the device you will be using on the wlan. If you have wireless IP Phones that requires 25mW, then survey at 25mW. Some IP Phones might allwo you to go to 50mW. For data, you should stick to 50mW but again it depends on what devices you have. So on your autonomous AP:
100mW = 20dBi
50mW = 17dBi
25mW = 14dBi

Error 10452 When i test an Individual Channel in MAX

I am Using an AI-16E-4 DAQ Card and When i test an individual channel (nonreferenced single ended) in MAX, i get error 10452 - Error occurred at AI Control. When I try to test the panels, i get a message that says "The Device is Not responding to the first IRQ level," but MAX still displays data acquired by the DAQ Card. I am using the PCMCIA Card on a PCI to PCMCIA Adapter on my desktop - could that have anything to do with the problem?

Hi,
This knowledgebase may be able to help with this issue:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/14dfb1a1788d1f3286256e4d007ca783?OpenDocument
I hope this helps,
Andrew A
Applications Engineer
National Instruments

Sound has stopped working; failed to play test tone; format not supported by the device (Vista x64 Ultimate)

I can no longer hear any sound from my speakers/headphones. This happened suddenly yesterday without any hardware changes or noticeable software updates.
-- The sound is not muted and the volume is set to full.
-- In the device manager, my SigmaTel HD Audio device has no warnings or errors.
-- I can't find any related messages in the Event Viewer.
-- The primary audio device is selected as the default for playback. The mixer shows my media player as being mixed properly to the device.
-- In the sound control panel, under Playback > Speakers/Headphones > Properties > Advanced:
- I get the error message "failed to play test tone" when I try to Test my Default Format (dvd quality)
- I get the error message "format not supported by the device" when I try to change my Default Format
-- Note that unlike others who have similar problems, I'm not joined to a domain
I've tried
* rebooting
* uninstalling and reinstalling the driver for the sound card
* "disable all enhancements" in the sound control panel
(http://social.msdn.microsoft.com/forums/en-US/windowspro-audiodevelopment/thread/b09e43ba-3ffa-4a45-9593-8eee686f124a/)
* looking in the registry for some registry key (not found)
(http://www.consumingexperience.com/2009/04/failed-to-play-test-tone-no-sound-on.html)
Computer details
Dell XPS M1530
Vista Ultimate x64 SP1 with current updates
SigmaTel driver version 6.10.0.5866
**Update**
I followed the following steps:
    * using regedit, go to HKLM\System\CurrentControlSet\Control\WMI\AutoLogger\Audio and change the “Start” value from 0 to 1.
    * Reboot the machine
    * Try to play an audio file.
    * Post a link to the generated log file which you can find in: %WINDIR%\system32\LogFiles\Audio
but don't know where to post the resulting AudioSrv.Evm.001 file. It's also not human readable and I can't find what utility parses it for reading.
**Another update**
Still can't read the EVM. logparser 2.2 can't parse it.
Found this thread which interested me but isn't applicable to x64 (I think):
http://social.msdn.microsoft.com/Forums/en-US/mediafoundationdevelopment/thread/94cdc662-e974-43de-8feb-6eb156924347
**YAU**
Dell confirms it's an OS issue after troubleshooting with me for a couple of hours (wow)
Is there a way to look at this EVM file _without_ installing the Windows Driver Kit??

Hi,
Thanks for posting in Microsoft TechNet Windows Vista Forum.
Upon your description, I see that you have done a lot of research and tests. Unfortunately, none of these troubleshooting works.
Based on my experience, this issue related to "failed to play test tone" can be related to several reasons. It also includes hardware defect. I am confusing why Dell confirms that the issue is related to Operating System. Could you let me know what operation Dell had troubleshot with you?
Meanwhile, here I just provide more troubleshooting except what you performed. If it doesn't work, I may also need to recommend that you contact Dell for support.
1. Microsoft has released a Hotfix to troubleshoot related to "Failed to play test tone".
http://support.microsoft.com/kb/930883
2. Make sure that these services are started.
Windows Audio
Multimedia Class Scheduler
Remote Procedure Call
Windows Audio Endpoint Builder
3. I noticed that this issue occurred not long ago, I may need to suggest that you perform a System Restore to the previous restore point when the computer without any problem.
System Restore
==============
1)     Please click on Start and choose All Programs, Accessories, System Tools, and then Windows Backup.
2)     Click Restore on the left pane.
3)     Choose Basic Restore.
4)     Follow the wizard and click Next.
5)     If you would like to restore everything in the backup, we can check the box “Restore everything in this backup” on the top of the window.
6)     We can also browse and choose certain files and folders to restore. Then, click Next.
7)     Then choose the folder to save the recovered files and click Next.
8)     When we see a “Restore is complete!” message, click Finish.
Meanwhile, as I know, I'm afraid that there is no other way to look at EVM file except Windows Driver Kit. Maybe there are some third-party software that out of my mind can look at EVM files, you may need to perform more research on Internet.
Hope this helps. Thanks.

Strange problem in report Execution in test system

Hi,
As something strange going on my program in test system.
1) Executing the program in Development system using SE38->program name->F8. the program executes and display selection screen fraction of seconds.
issue:
When i am doing same process in TEST System(using SE38->program name->F8) the execution process is min 1 or 2 min , then i am gettign the Selection screen.
I have checked other programs in TEST System but it doesnu2019t happen to any other programs on TEST system.
Program functionality--
i am using 2 table and MARA and Z table, Using Selection screen i am extracting the data into output screen and excel download
Dispaly
1)if user select the Radio button output to screen in selection screen
Display data into screen using some color formatted
2)if user select the Radio button output to file in selection screen
I am using OLE Automation Controller to get the Output excel download some color formatted data
please let me know how to rsolve this type of isssue in Test system...
plz respond when you find the time.
Regards,
AS
Moderator Message: Urgency downgraded.
Edited by: kishan P on Apr 13, 2011 11:59 AM

Yes ..
INITIALIZATION. Event i have written code like free the objects ans clear Work Area and Refresh the Internal tables
And
*-to highlight the comments on selection-screen
LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'RM1'.
      SCREEN-INTENSIFIED = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Add entries to get the search help values
PERFORM SEARCHELP_REGION.
PERFORM SEARCHELP_COUNTRY.
At selection screen event i am getting the search help for the region and country
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_REGN-LOW.
*Search help for Region
PERFORM SEARCHHELP_REGN_F4.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CTRY-LOW.
*Search help for Country
   PERFORM SEARCHHELP_CTRY_F4.
using FM :*FM for F4 help for returning the value to be displayed
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
Please let me know is it couse problem in TEST System....
so how to resolve the issue...
Regards,
SR

No HDMI Audio, Failed to Play Test Tone, Can't Change Default Playback Device

Hello, I'm experiencing some real trouble with my HP Pavilion dv6-2160us (with the i3-330M, no dedicated graphics) Windows 7-64 bit, SP1 PC, and I would greatly appreciate some assistance.
I've created a new thread because, despite the fact that many other people have experienced a problem similar to this and have posted what worked for them, nothing has worked for me.
The Problem(s):
My main problem is that I cannot get any audio to play from my PC to my HDMI HDTV.
When I plug my HDMI cable into my PC and TV, the TV is recognized in Playback Devices, but nothing can play to it.
When I try to test the TV in playback devices, I get a "Failed to play test tone" error.
Additionally, I'd like to mention some other odd behavior that I think may be a part of the main problem.
In Playback Devices, I cannot change anything. I can't disable or enable a device, I can't set default playback or communication devices, and I can't save changes inside device properties. Every time I try to change something, like the default playback device, nothing happens or the changes are immediately reversed.
The Question:
How can I get audio to play over HDMI on my PC (It's not a problem with the TV, my other HP machines play audio over HDMI to it just fine.)?
What I've Tried:
I have tried:
Changing the default playback devices, which I'm unable to do
Running the Windows 7 Audio Playback troubleshooters from within a clean boot state
Uninstalling and reinstalling the Intel(R) Display Audio driver
Uninstalling and reinstalling the IDT High Definition Audio CODEC
Uninstalling the IDT PC Audio program from Programs and Features
Disabling the IDT High Definition Audio CODEC
Nothing has worked.
The drivers I have are the latest issued by HP
How can I get this working? I would really appreciate some assistance.
I'm at the point where I'm ready to try pretty technically-involved suggestions, so, please feel free to post those.
Your expertise is greatly appreciated.
Thanks.

Hi @dskrobow,
Welcome to the HP Forums!
It is a terrific place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you are connecting a HDTV but you do not have any audio.
Here are two links that may help.
HP Notebook PCs - Using Two or More Video Displays in Windows 7
HP Notebook PCs - Troubleshooting HDMI Display and Sound Issues.
Have you ran the HP Support Assistant ?
Have you ran the Windows troubleshooter?
If you appreciate my responding please click the kudos button below to say thanks.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

LE 8 Master Level Doesn't Work

Hi. Can anyone tell me how to get my master level slider on the Transport Bar to work? Clicking the Dim button works, but moving the slider has no effect on the Master Level channel strip in the mixer and of course doesn't change the audio level. Neither does the right button which is supposed to set the level to 0db.

Now this is new! When I click the Dim button, the Dim icon highlights, the level drops and the slider jumps to about 3/4 of the way to the end of the range of the slider. Then I move the slider and nothing changes aurally or in the Master Output Channel Strip. When I click the Dim button again ( to deselect it), the button un-highlights, the slider jumps back to the same 3/4 spot. Subsequent slider wiggling has no effect. Also, I've noticed that pressing the 0 db switch on the right has no effect on the Master Output switch, or the level of the signal, but it does cause the Master Level slider to move to that 3/4 spot. What's new is that rather than dimming to the level that I've set in Audio Prefs, the signal is apparently dropping by some set amount subtracted from what the Master Output is set at, ie, when MO slider is low, Dim switch drops the signal to an inaudible level, rather than what I've set in Prefs. What's up with that, do you suppose?
Since I wrote the above, I went back and tried a blank template project file, and the slider works more like what you'd expect, except I was expecting the Master Output slider to actually move along with the Master Level slider in the Transport Bar, which it does not. In the blank template project, moving the slider causes a level change, the Dim and 0db switches work OK. So there is apparently something in the project I'm working on causing the disconnect. Any ideas?

Failed to play test tone

When ever I try to play any sound, nothing happens. When I go into the control panel and double click on the “sound” icon, it shows my speakers. And when click on my sound device or speakers, and hit test, the message I get it "failed to play test tone".
Now for some background.
1. I had a different soundcard that was doing the same thing, but I thought maybe it just "went bad", so I bought a new one. I’ve installed it with no problem.
2. Yes, all the drivers are up to date. I've run Windows update numerous times and I've double checked the driver version against the one on the manufactures website - they are the same. Everything is up to date.
3. The device manager can see my speakers/sound card and it says its working.
4. I started out on another forum "Media foundation development - Re:Vista/No Sound/Failed to play test tone" and read the whole thread, did everything it told me to, and I even e-mail Microsoft to get a hotfix. I installed the hotfix, to no avail. Nothing has changed, my sound still does not work.
5. The posters/answers at the above thread said they weren't really audio experts and were directing everyone to this thread.


Please help.
Chris

Goto the following key in registry.
HKEY_LOCAL_MACHINE
à
SOFTWARE à
Microsoft à
Windows à
                                    CurrentVersion
à
MMDevices à
Audio à
Render à
{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} à
FxProperties
In the right hand side of the registry window
change the value
of {1da5d803-d492-4edd-8c23-e0c0ffee7f0e},5
(value type is REG_DWORD) to 1 (one) instead of 0 (zero).
INCASE YOU DON'T FIND THE ABOVE MENTIONED KEY UNDER fxproperties,
PLEASE CREATE IT BY YOURSELF. (COPY & PASTE
{1da5d803-d492-4edd-8c23-e0c0ffee7f0e},5
TYPE
IS REG_DWORD AND PUT VALUE 1
The audio start working at the moment you change the above
value !!! (even before closing the registry editor).
Thanks & regards
Deepak & Kabeer.
Doha-Qatar.
Mob : +974-5838614 & +974-5492246

NO SOUND, FAILED TO PLAY TEST TONE

I have a Compac pressario with windows 7 starter, a week ago an update didn-t allow me to use the virtual keyboard, I run a restore to a previous point and it ended up  with no sound also I UNISTALL - REINSTALL AUDIO DRIVER, EVERY TEST SAYS THERE IS NO ISSUE, HOWEVER WHEN I TEST THE SPEAKERS NOTHING IS HEARD and says fail to play test tone. Please help me. There is no assistance available from HP for this model.

Goto the following key in registry.
HKEY_LOCAL_MACHINE
à
SOFTWARE à
Microsoft à
Windows à
                                    CurrentVersion
à
MMDevices à
Audio à
Render à
{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} à
FxProperties
In the right hand side of the registry window
change the value
of {1da5d803-d492-4edd-8c23-e0c0ffee7f0e},5
(value type is REG_DWORD) to 1 (one) instead of 0 (zero).
INCASE YOU DON'T FIND THE ABOVE MENTIONED KEY UNDER fxproperties,
PLEASE CREATE IT BY YOURSELF. (COPY & PASTE
{1da5d803-d492-4edd-8c23-e0c0ffee7f0e},5
TYPE
IS REG_DWORD AND PUT VALUE 1
The audio start working at the moment you change the above
value !!! (even before closing the registry editor).
Thanks & regards
Deepak & Kabeer.
Doha-Qatar.
Mob : +974-5838614 & +974-5492246

Is it have some User exits for Vendor master trigger when click some field

Dear Experts,
I would like to know Is it have User exit for Vendor master trigger when click some field in Vendor master? not just User exit for Prior Save . Please kindly let me know some solution for this case.
Many thank.

Hi,
check may this bapi will be useful your requirements, BAPI_VENDOR_CREATE
below links may helpful for you:
BADI http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm http://support.sas.com/rnd/papers/sugi30/SAP.ppt http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm http://members.aol.com/_ht_a/skarkada/sap/ http://www.ct-software.com/reportpool_frame.htm http://www.saphelp.com/SAP_Technical.htm http://www.kabai.com/abaps/q.htm http://www.guidancetech.com/people/holland/sap/abap/ http://www.planetsap.com/download_abap_programs.htm http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm USER EXIT http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sapgenie.com/abap/code/abap26.htm http://www.sap-img.com/abap/what-is-user-exits.htm http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction http://www.easymarketplace.de/userexit.php http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sappoint.com/abap/userexit.pdfUser-Exit http://www.sap-img.com/ab038.htm http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sap-img.com/abap/what-is-user-exits.htm http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html Rewards if useful......... Minal
still if you not find any solution go for custom exit, means in standard program only ABAP consultant change the program where you required, it is little risk, you have to do the more testing for this
BR:
Venkat.Gurram

Test tone generator?

Hi,
Im doing some hardware amplifier repair work and I need a signal/function/test tone generator but I cant seem to find a decent working up-to-date one that runs under linux. Ive tried baudline_jack but it just segfaults when I hit record with the tone generator enabled. Ive tried siggen but it looks for /dev/audio or /dev/dsp (which I dont have) and it segfaults. Ive tried all of the arachnoid.com ones and the java script one does work but it is limited for my purposes in that it doesnt generate sweeps. Ive even tried looking for LADSPA and LV2 plugins but I couldnt really find anything. Basically im looking for something as close to this "Test Tone Generator" as possible.
Any Ideas?
Edit:
I can get by with using the arachnoid generators modulator instead of a dedicated sweep but I would still like to find a good replacement. THX
Last edited by assimilat (2013-01-15 20:08:03)

assimilat wrote:Ive tried siggen but it looks for /dev/audio or /dev/dsp (which I dont have) and it segfaults.
You don't have /dev/audio because ALSA's oss emulation modules aren't loaded by default. /dev/audio and /dev/dsp were created when I tried this:
# modprobe snd_pcm_oss
I don't know if this will get siggen working for you, I haven't tried it.
https://bbs.archlinux.org/viewtopic.php … 53#p776253
https://wiki.archlinux.org/index.php/Al … are_loaded
https://wiki.archlinux.org/index.php/Ke … es#Loading

Very strange behaviour master-detail-detail please help

Very strange behaviour master-detail-detail please help
Hello,
I have a parent-child-grandchild report which show's some really strange behaviour.
The data template has 3 queries Q1, Q2 and Q3.
Q2 is bound to Q1 using a bind variable
Q3 is bound to Q2 using another bind variable
For a certain record in Q1 the output should be
2 records in Q2
and 1 record in Q3 for each record in Q2
Q1 record
Q2 record A
Q3 record AA
Q2 record B
Q3 record BC
The results conforms to the expected output.
For another record in Q1 the output should be
2 records in Q2
and 2 records in Q3 for each record in Q2
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record BC
Q3 record BD
In stead of the expected output, the result shows
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record AB
For another record in Q1 the output should be
5 records in Q2
and 2 records in Q3 for each record in Q2
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record BC
Q3 record BD
Q2 record C
Q3 record CE
Q3 record CF
Q2 record D
Q3 record DG
Q3 record DH
Q2 record E
Q3 record EI
Q3 record EJ
In stead of the expected output, the result shows
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record BC
Q3 record BD
Q2 record C
Q3 record CE
Q3 record CF
Q2 record D
Q3 record DG
Q3 record DH
Q2 record E
Q3 record DH
So for the last record of Q2 I don't get the appropriate records from Q3 when there are multiple records to be shown, but only the last record which belongs to the previous Q2
What is going on?
Please help me out...
Kind regards,
Jan-Marcel

Hi Tim,
Thanks for your reply. Below you will find the datatemplate on the scott/tiger schema.
Please help me out.
Kind regards,
Jan-Marcel
<dataTemplate name="scott" description="Template scott" dataSourceRef="otcy001" version="1.1">
<parameters>
    <parameter name="p_deptno" dataType="number"/>
</parameters>
<dataQuery>
    <sqlStatement name="Q1">
      <![CDATA[
        select empno            mgr_empno
             , ename            mgr_name
             , job              mgr_job
             , hiredate         mgr_hiredate
             , sal              mgr_sal
             , comm             mgr_comm
          from emp
         where deptno = nvl(:p_deptno, deptno)
           and mgr is null
      ]]>
    </sqlStatement>
    <sqlStatement name="Q2">
      <![CDATA[
        select empno            mgr2_empno
             , ename            mgr2_name
             , job              mgr2_job
             , hiredate         mgr2_hiredate
             , sal              mgr2_sal
             , comm             mgr2_comm
             , mgr              mgr2_mgr
          from emp
         where mgr = :mgr_empno
      ]]>
    </sqlStatement>
    <sqlStatement name="Q3">
      <![CDATA[
        select empno            emp_no
             , ename            emp_name
             , job              emp_job
             , hiredate         emp_hiredate
             , sal              emp_sal
             , comm             emp_comm
             , mgr              emp_mgr
          from emp
         where mgr = :mgr2_empno
      ]]>
    </sqlStatement>
</dataQuery>
<dataStructure>
    <group name="G_mgr1" source="Q1">
      <element name="q1_mgr_empno"    value="mgr_empno"/>
      <element name="q1_mgr_name"     value="mgr_name"/>
      <element name="q1_mgr_job"      value="mgr_job"/>
      <element name="q1_mgr_hiredate" value="mgr_hiredate"/>
      <element name="q1_mgr_sal"      value="mgr_sal"/>
      <element name="q1_mgr_comm"     value="mgr_comm"/>
      <group name="G_mgr2" source="Q2">
        <element name="q2_mgr_empno"    value="mgr2_empno"/>
        <element name="q2_mgr_name"     value="mgr2_name"/>
        <element name="q2_mgr_job"      value="mgr2_job"/>
        <element name="q2_mgr_hiredate" value="mgr2_hiredate"/>
        <element name="q2_mgr_sal"      value="mgr2_sal"/>
        <element name="q2_mgr_comm"     value="mgr2_comm"/>
        <element name="q2_mgr2_mgr"     value="mgr2_mgr"/>
        <group name="G_emp" source="Q3">
          <element name="q3_emp_empno"    value="emp_empno"/>
          <element name="q3_emp_name"     value="emp_name"/>
          <element name="q3_emp_job"      value="emp_job"/>
          <element name="q3_emp_hiredate" value="emp_hiredate"/>
          <element name="q3_emp_sal"      value="emp_sal"/>
          <element name="q3_emp_comm"     value="emp_comm"/>
          <element name="q3_emp_mgr"      value="emp_mgr"/>
        </group>
      </group>
    </group>
</dataStructure>
</dataTemplate>

Encore CS5.1 Blu-ray Replication Problem - Master Failed BDA Compliance Testing

I've authored a Blu-ray in Encore 5.1
I purchased and used BluStreak Tracer with Export BDCMF
I sent the BDCMF to Cinram for duplication.
From Cinram I received "Master Failed BDA Compliance Testing"
The specific error is:
Verifier: Sony BD-ROM Verifier for FS and AV
Version: Version 2.04 Build 0049
Compliance: ERRORS DETECTED
Errors: 1
Warnings: 0
INPUT INFORMATION:
Source: DISC IMAGE
Type: BD25
Layer 0 Logical Sector count: 9008416
Path: Z:\01 TO_BE_BD_AACS_PROCESSED\SA_BPVZBG1001.1.A\Lovers Exile BDCMF\UD.DAT
ERROR INFORMATION:
   Code: ES1711: Dolby Digital (AC-3) and Dolby Digital Plus audio streams
   Summary: The bsid field is not set to 1000b (8), or 110b (6). (See BD-ROM Part 3-1,
            9.9.4)
How may I fix this problem? How do I get Enocre to set the bsid field to where the specs require it?
Are there any other work arounds to this particular problem as I am in a bit of spot because my client wants to distribute this fine disc we have created and Cinram will not because the Encore authoring does not appear to be conforming to the official specifications? A fair bit of money is on the line.

Finally made it throug to tech support and they created a case number and they will call me when they have a solution. I'm not holding my breath. In the meantime I've got to find a solution.
The audio is encoded in the m2ts file so I’ve got to do the audio and video together. I’m considering re-encoding via Encore but using H264 instead of mpeg but I’m not sure what audio encoding options are available as of yet if I go that route.
I’m first trying to establish the tools (mediainfo run in cli) to be able to evaluate what BSID is spit out.
Another option I’m exploring is to re-render the m2ts files output by Encore (located in the stream dir) in Sony Vegas and see if they conform to BDA spec. I’d then have to replace the files in the Stream dir and wash it through BluStreak tracer but I’m not confident it will compile the CMF properly doing it that way.
A third option is to encode all the video via vegas, replace the footage in encore with the pre-encoded stuff (telling encore not to transcode it). I'm not sure if I can do this in Encore though.
Again, first step is to get the tools to “see” the problem.
Any advice is appreciated!
James

No Master Level slider in Transport Bar?

Hi,
I'm new to Logic, just bought Logic Studio and am now exploring Logic Pro 8, which, at first sight looks really nice (if compared to Pro Tools, which I used before).
Got a small question though.
Although I customized my transport bar to show the "Master Level" meter, it simply doesnt show up. I checked and unchecked the box, but nothing changes in my transport bar (whereas if I check or uncheck other boxes, buttons come and go in my transport bar)
This is, of course, not a big issue, but it seems quiet a handy feature to use and I was just wondering if this could be a bug or am I doing something wrong?
Thx!
Senne

It shows up here... bottom right hand side of the Transport bar.
It's 2 speaker icons, one on the left, one on the right, with a slider inbetween.
You're really not getting that when you select it?
It might be a good idea to trash preferences then...

Strange wandering master level when injecting test tone.

Similar Messages

Maybe you are looking for