SU Storage Type with Fixed Bin Putaway

Hi,
When I am activating SU for a new Storage type with Putaway strategy F then system gives the error as
" If you have st.pl.str. "Fixed bin", the area check must not be active" Message no. LT071
Does it mean Putaway strategy F is not to be used for SU managed storage Type?
or is there anyway to solve the above error?
Regards,
Vengat

I receive the same error (LT071) if I set T331-PRBER (storage section check active) whilst putaway strategy (T331-STEIN) is "F".
include: L0L12F01
form: T331_CHECK
comment for the error message:
..Strategie F mit Bereichsprüfung ist Blödsinn..
("Stratgey F with storage section check is foolishness")
Are you using T331-PRBER and T331-STEIN paralelly? If yes, why?
If I just activate SUM for a storage type with putaway strategy "F", there's no problem

Similar Messages

Multiple bins in one section in storage type with 'C' open storage strategy

Experts,
I am doing random storage replenishment process for a Low rack location. The replenishment gets triggered from high rack to low rack.
The low rack storage type is defined as next empty bin as putaway strategy and the storage type contains multiple bins in each section.
There is process change and I want to place multiple SUs in one bin , I want to use the putaway strategy as 'C' open storage
and mixed storage allowed with SUT check and SU management active . It is working fine as expected in terms of triggering replenishment
and storing multiple SUs in 1 bin.My concern is that as a rule open storage should contain only one storage bin for section.But in my design , each section contains
multiple storage bins. Does is really hurt in any form? What are consequences? Please suggest.
Thanks in advance

Experts,
I am doing random storage replenishment process for a Low rack location. The replenishment gets triggered from high rack to low rack.
The low rack storage type is defined as next empty bin as putaway strategy and the storage type contains multiple bins in each section.
There is process change and I want to place multiple SUs in one bin , I want to use the putaway strategy as 'C' open storage
and mixed storage allowed with SUT check and SU management active . It is working fine as expected in terms of triggering replenishment
and storing multiple SUs in 1 bin.My concern is that as a rule open storage should contain only one storage bin for section.But in my design , each section contains
multiple storage bins. Does is really hurt in any form? What are consequences? Please suggest.
Thanks in advance
Hello,
You are right. Normally it does not hurt, but what you are doing with the new process change contradicts your original design. Can you explain why you had storage sections in the area in the original design? Did you segregate SKU's by product families/fast movers etc....and now you dont have that requirement anymore or your SKU management has changed?

In WM how to clear partially difference in an open storage type with one mi

Hi
I would like to know how in WM to clear partially differences in an open storage type with one mixed bin not totally counted?
thanks in advance
cadanj

Please do the inventory check for the whole bin.Count the each quant of the material. Difference can be cleared.Use following transactions.
1.LI01N-Create Inventory document.
2.LI11N-Enter inventory count.
3.LI20-Clear WM differences
4.LI21-Clera IM differences.
Let me know if u have any other question.
Regards,
PRashant

How to distribute HU items in to diffrent storage types and diffrent BINS

Hi
I have one handling unit and I have done empty all 4 items in it HU02
As a result one material document created
But How can I distribute all items in to diffrent storage types and diffrent BINS
No TR and Posting change created at material doc
What is the config settings to cretae TR ot Posting change notice and Movement types
Kindly Help

yes LT10

Stock transfer from 998 storage type to Physical bins

Dear Experts,
As part of data conversion,After loading huge stock into SAP 998 st type into INITIAL bin,I want to move the stock into physical bins.I have SU management activated.
1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
4) I want to print the storage units simultaneously during this process. How can I do this?
I really appreciate your help.
Thanks

Answering your questions:
1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
Use this info to load the stock into the correct storage bin
2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
Don't really understand what your doubt is, but if your MM/WM setup is correct, this should go OK
3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
LSMW, with 'Standard batch/Direct Input' Object 0220 and Method 0000 (should be assigned to program RLBEST00).
4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
Based on previous answer, no!
4) I want to print the storage units simultaneously during this process. How can I do this?
Just assign the correct print code to the 561 movement type...but beware for the fact that a lot of labels will be generated at the same time and you can stuck your printer :s

LP24--Replenishment for Storage Types with Random Space Management

Hey Everyone,
I'm new to the SAP Community Network so thanks in advance for all your input. I've seen numerous posts that have improved my understanding of SAP already.
My question is about LP24. I would like to know if there is a configuration that will prevent invalid replenishment requirements from being listed with other materials that require materials staging and conversion to transfer order.
Here is my problem. We have thousands of materials, with valid replenishment indicators set that are either out of stock or all stock is in the forward pick storage type already. However, I am required to click through all of the invalid requirements to assure that I pick up my valid requirements (materials with additional stock in an overstock storage type that can be replenished to a forward pick storage type). Is there any way to filter the invalid requirements out?
Thanks again for all your insight.
Marvin

Im facing similar situation.
Did you got any feedback here in the forum?

Fixed bins to be defined in a storage type

I have multiple materials in a storage type in which some of the bins need to be assigned as fixed bins and some of them not. Is this possible ? I have a requirement to use the fixed bins to be replenished from High rack.If this is not possible then I need to create so many sections to make sure each material need to be putaway in one assigned bin for that material.
Any ideas?

PutAway and Picking Strategies are determined at Storage Type level.
So you can only have one strategy per Storage Type : either FIXED BINS or another strategy.
One Storage type does not have to be BINs next to one another.....
In the same physical space you can have two storage types where some BINs are Fixed Bins in one Storage Type and some BINs are not fixed Bins in the other Storage Type....that is one possibility.
If that is not possible, then I would look at having a PutAway and Picking Strategies that are so restrictive for each material that they have to go to a specific BIN .
Those are only a few ideas, it really depends on what your constraints are, how many materials are concerned, etc....
And finally, there is the user-exit option.....
Edited by: AGagnon on Aug 11, 2010 11:31 PM

WM : Automatic replenishment TO for fixed bin from warious storage types

Hi Gurus,
We have storage type 011 - fixed Bin storage type , 022 - self Storage and 055 - High Rack Storage. Also we have set up for automatic TO creation for fixed bin in fixed bin storage type when stock falls below minimum fixed bin quantity.
My problem is : system only creates TO when there is some stock in 055 - High Rack Storage. If there is no stock in 055 system doesn't create any TO. But there's lots of stock in 011( other than fixed bin) and 022.
we want system to serch for 055/ 022/ 011 sequence. So if there is no stock in 055, it should go for 022 and then 011.
Can anyone advise me on this? I will be really grateful.
Kind Regards
Raja Ram

Hi,
Can you please explain me the steps required to config the picking strategy for fixed bin replenishement?
Thanks & Regards
Raja Ram

WM - Storage Type Replenishment

Hi everyone !
I have a little problem with the storage type replenishement in WM.
I configured two replenishment movements for 2 storage types :
- First one for a storage type that manage the base unit of measure "pieces", and that has a "capacity check" based on material and a putaway strategy "I" (addition to existing stock).
- Second one for a storage type that uses the <u>Storage Unit</u> "Case" and uses a putaway strategy "L".
Then I configured the replenishement as "Transfer Order (random) imm.".
I have correct data in the material master.
The problem is that the system does not create any TO when confirming the TO that pass under the mimum stock.
<u>It has worked once</u> with the first replenishment movement, but configured with the putaway strategy "L", and without the Capacity Check (without any complication).
I think this is a problem during the automatic creation of the TO, maybe due to palletization data proposed during the automatic TO creation...
Does anyone has an idea ?
Thanks
Remi

When ever the stock level in a fixed bin for a particular storage type goes below the min bin qty replenishment is triggred automatically by running RLLNACH1 or manually by LP21 which creates TRs.And TRs are converted to TOs.
In your question you have given the Material, Warehouse
and Storage type only fixed bin is not there.
In the Material Master WM 2 view you need to maintian the fixed bin in storage bin field and the max bin qty and min
bin qty and the replenishment qty in their respective fields.
Configuration:
==========
Spro >> LE >> WM >> Activities >> Transfers >> Define Stock Transfers and Replenishment Control
Click on Maintian WM movement types and check whether replenishment movement type 320 (Std) is maintained.
Double click and maintain a value e.g 1 in the Ref stor type search field
And the same value 1 should be maintianed in the storage type search as below
Spro>> LE >> WM >> Strategies >> Activate Storage type search >> Define Search Sequence
Whse: oper:   Typ In:   stkcat: Splstk: Stoclass:   Wpc
200       A        XXX
Ref sto type   sto loc      1     2     3    4   5    6    7   8 .....
     1                            210
xxx is the type in mentioned in the MMR in WM view 1 in stk removal field.
F3 Back
Click on Define Replenishment Control for Storage Type
whse storage type Mtyp Repl. Replenish
200     210         320             1
Then execute transaction LP21 and enter the parameters like plnt, sloc,whse,sto type, Sto bin (Fixed bin in MMR),Material
Executing will create TR when Stock level is below the min bin qty.
TR can be converted to TO.

Replenishment Order in WM storage type

Hi xpert
I have a scenario like this
Warehouse Number 200
Storage type 210 and storage type 310
Matreial AB100
The requirement is:-------Whenever stock level at storage type 210 falls below a predifined stock level, system should create a order of stock with multiple of 50 pallets.
appreciate your quick effort on this
Regards
DInabandhu

When ever the stock level in a fixed bin for a particular storage type goes below the min bin qty replenishment is triggred automatically by running RLLNACH1 or manually by LP21 which creates TRs.And TRs are converted to TOs.
In your question you have given the Material, Warehouse
and Storage type only fixed bin is not there.
In the Material Master WM 2 view you need to maintian the fixed bin in storage bin field and the max bin qty and min
bin qty and the replenishment qty in their respective fields.
Configuration:
==========
Spro >> LE >> WM >> Activities >> Transfers >> Define Stock Transfers and Replenishment Control
Click on Maintian WM movement types and check whether replenishment movement type 320 (Std) is maintained.
Double click and maintain a value e.g 1 in the Ref stor type search field
And the same value 1 should be maintianed in the storage type search as below
Spro>> LE >> WM >> Strategies >> Activate Storage type search >> Define Search Sequence
Whse: oper:   Typ In:   stkcat: Splstk: Stoclass:   Wpc
200       A        XXX
Ref sto type   sto loc      1     2     3    4   5    6    7   8 .....
     1                            210
xxx is the type in mentioned in the MMR in WM view 1 in stk removal field.
F3 Back
Click on Define Replenishment Control for Storage Type
whse storage type Mtyp Repl. Replenish
200     210         320             1
Then execute transaction LP21 and enter the parameters like plnt, sloc,whse,sto type, Sto bin (Fixed bin in MMR),Material
Executing will create TR when Stock level is below the min bin qty.
TR can be converted to TO.

Wm fixed bin & sales order material differentiation

Hi Friends,
If I have one material which can be used in production & also can be sold to customer.
As I have fixed bin strategy if qty is low for the goods receipted from the vendor then it goes to fixed bin else high rack.
For the purchases for sales order we keep that material in high rack storage.
How can I differentiate so that goods receipt for sale should be moved to High rack storage.

hy,
we have the material that has a fixed bin setted up like this:
eg.
storage type 001 = fixed bin
storage type 002 = reserve (high rack)
so all the material that have a fixed bin, have the set the stock placement value in the material master to 002. Then we have a replenishment job that always refills the stock in the fixed bin location if the stock has reached the minimum bin quantity.
hope that helps.

Client Specific Requirement Fixed bin storage type

Hi There is one requirement if anybody can help,
A company has fixed bin storage for a particular material, But they keep that Material in PC(Pieces) as well as in Boxes( say 1bx= 5pc) But they want to keep the pieces in a one fixed bin (say 1) and the boxes in a another different fixed bin(say 2), though the material is same.
So that when a transfer order is made for material in pieces it automatically refers to bin1 and if it is made for material in boxes it refers to bin 2.
Please any body help me and let me know how can we configure this. If you have any specific files please mail at
[email protected]
Thanks

Hello Harsimram,
Why you can not ask?
When the thing is not logically possible then there is always "Change Management"
Regarding the Requirement, We can not use user-exit with fix bin strategy so that option is also out of scop.
Regards
Arif Mansuri

[WM] Putaway strategy for bulk storage type SU-managed

Hi Gurus,
I need your help
I have a Bulk storage type with SU-managed. I would undestand the real behaviour of putaway strategy B.
1) Case 1: assume that in bulk storage type there are the followed bins (rows):
- in bin XX1 there is material AAA
- Bin XX2 is empty
In this situation if i receive material AAA, putaway strategy B chooses the bin XX1 by background processing - correct!
2) Case 2: assume that in bulk storage type there are the followed bins (rows):
- In Bin XX1 there is material AAA
- in Bin XX2 there is material AAA
- in Bin XX3 there is material AAA
In this situation if i receive material AAA, i don't undestand the behaviour of putaway strategy B. Seems that the system chooses in random way the bin (XX1, XX2 and XX3).
P.S: the storage unit type is one of default - E1.
Can you help me?
Thank very much

You told
Addn to Stock: X
Block upon placement: empty
Then How can you have Case 2?
In Bin XX1 there is material AAA
Next time also stock goes to XX1 only not XX2 unless you overwrite manually.
What does your block strage structure looks like? i'm sorry but i don't undestand your question.
Go to OMM4 "Define-Block struct." and look No. SUs for your St. bin type, SUT & Bulk stor Ind.

Reg Storage location control when pulled materials via fixed bin replenishm

We are Using Storagelocation Control Functionality in WM
We have below Storage locations
RW01 - Raw Material Storing
PD01 - Materials staged for Production Lines
I have setup RW01 as Standard Storage location and PD01 as 'not copied to TR'
When i try to do bin to bin tranfer raw material to production lines From Bin in RW01 to Bin in PD01, TO has RW01 as expected, i Run posting change background job and this functionality is working fine
We would be using Fixed bin replenishment strategy to stage materials for productions from raw materials storage
I run LP21 for PD01, it has created TR but has storage location PD01 instead of RW01.
PD01 shouldnt have copied as i have set 'Not to be copied to TR' for PD01
Fixed bin replenishment doesnt support storage location control? does we need to go for customization ?
Please help

Please help
Bin to Bin is working fine as per storage location control functionality set-up
We have issue with fixed bin replenishment combined with storage location control
Please share your inputs, Thank you
While debugging we relaixed SAP doesnt check storage location control config at all while doing fixed bin replenishment, only custom solution to force system to check storage location control config and assign storage location is TR?
Edited by: Sasi nagireddy on Jul 18, 2011 8:34 AM

WM - Storage type 001 is not suitable as an interim storage area -

Hi,
When i'm doing Migo, the blw error has came, pls advise , how solve it..
seems, some where i made wrong config.. These process i was trying in our ides server..
Storage type 001 is not suitable as an interim storage area
Message no. L9022
Diagnosis
You have attempted to execute a posting to a dynamic coordinate in a storage type for which a putaway strategy is defined. Dynamic coordinates, however, are provided only for storage types without a putaway strategy.

thanks Raman
pls tell me now , where i have to check the config.. and where i may did the mistake.
for ur info, ref to sdn A08- conf guide as per blw , i made the conf..
3.1 Full WM Basic Settings
3.1.1 Defining Control Parameters for Warehouse Number
3.1.2 MM-IM Storage Location <-> Warehouse Number     J01
3.1.3 Defining Storage Type                                              001- high rack system
3.1.4 Defining Storage Section                                            001- Fastmoving
3.1.5 Defining Storage Bin Types                                   P1-BIN HEGIHT 1 MTR
3.1.6 Defining Blocking Reasons                                           1
3.1.7 Defining Storage Bin Structures
3.1.8 Defining Storage Type Indicators                                1
3.1.9 Defining Storage Unit Types                                    E1
3.1.10 Defining Storage Section Indicator                        001- Fastmoving
3.1.11 Defining Bulk Storage Indicator                                      B1
3.2 Strategies
3.2.1 Activating Storage Type Search
3.2.2 Activating Storage Section Search
3.2.3 Activating Storage Bin Type Search
3.2.4 Defining Sort Sequence for Putaways (Cross-line Stock Putaway) Definition of Sort Field in Storage Bin
3.2.5 Defining Strategy for Pallets
3.2.6 Defining Putaway Strategy for Bulk Storage
3.2.7 Defining Strategy for Stringent FIFO
3.2.8 Defining Strategy for Large/Small Quantities Determining Search Sequence
3.3 Activities
3.3.1 Defining Requirement Categories
3.3.2 Defining Shipment Types
3.3.3 Defining Movement Types
3.3.4 Defining Stock Transfer and Replenishment Control Defining Replenishment Control for Storage Type
3.3.5 Setting up 2-Step Picking
3.3.6 Defining Confirmation
3.3.7 Print Control
3.3.8 Defining Default Values
3.3.9 Defining Types for Storage Type
3.3.10 Defining Difference and Document Limit
3.3.11 Clearing Difference (Interface with IM) MM-IM Movement Types for Clearing Inventory
3.3.12 Clearing Difference (Interface with IM)  Do Not Allow Clearing in Storage Types
3.4 Interfaces
3.4.1 Allowed Negative Stocks in Interim Storage Types Allowing Negative Stock for Each Storage Type
3.4.2 Shipping Shipping Control per Warehouse Number
3.4.3 Shipping  Requirement Types of Delivery Documents
3.4.4 2-Step Picking
3.4.5 Creating Automatic Transfer Order
3.5 Manual Activities
3.5.1 Maintaining Number Range and Assignment
3.5.2 Maintaining Number Range for Physical Inventory
3.5.3 Creating Storage Bins
3.5.4 Generating Interim Storage Bin
Edited by: UJ on Mar 4, 2009 7:16 AM

SU Storage Type with Fixed Bin Putaway

Similar Messages

Maybe you are looking for