Sub contract migo for excise item

Hi
I have prepared the following documents
1. Subcontract Purchase order (x is parent item and y is child item)
2. Subcontract challan (for child item y)
In our case supplier added some materials for producing X for that they charged ED
I prepared migo referring Subcontract challan and subsequently I captured Excise internal Number through J1IEX (referring Migo Number & Enter the Invoice Number)
While posting Part 2. System displayed the message Part1 is not updated.
Kindly suggest your valuable feedback.
Note: Otherwise tell the process of how to handle of subcontract item with excise invoice.
Regards
Pons

Hi,
Subcontracting Process
Subcontracting without Payment of Duty
- Creation of Subcontracting PO (ME21N)
- Transfer Posting of Components to Subcontractor (Mvmt Type - 541) (MB1B/ME2O/MIGO)
- Creation of Subcontracting Challan w.r.t. Transfer Posting Doc (J1IF01)
- Goods Receipt w.r.t. Subcontracting PO and Refer Subcontracting Challan at the time of GR (MIGO) {GR with 101 and autoconsumption of components with 543 movement}
- Reconciliation of Subcontracting Challan (J1IFQ)
- Completion of Subcontracting Challan (J1IF13)
- Generation of Annexure IV (J1IFR)
Subcontracting under Full Payment of Duty
- Creation of Subcontracting PO (ME21N)
- Transfer Posting of Components to Subcontractor (MB1B/ME2O/MIGO)
- Creation of Excise Invoice w.r.t. Transfer Posting Document (J1IS)
- Capture Excise Invoice at the time of GR of Finished Goods w.r.t. Subcontracting PO (MIGO)
- Post Excise Invoice (J1IEX)
Master Data
- MM01- Material Masters for Components and FG
- XK01 - Vendor Master (Subcontractor)
- CS01 - BOM for FG
- ME11 - Purchase Inforecord for Subcontracting
Note: - Excise Transactions need to be performed only if it is applicable.
Hi,
Refer link;
[Subcontracting Process w/o Payment of Excise Duty|http://help.sap.com/bestpractices/BBLibrary/Documentation/J85_BPP_V2_EN_IN.doc]
Subcontracting Process
Subcontracting without Payment of Duty
- Creation of Subcontracting PO (ME21N)
- Transfer Posting of Components to Subcontractor (Mvmt Type - 541) (MB1B/ME2O/MIGO)
- Creation of Subcontracting Challan w.r.t. Transfer Posting Doc (J1IF01)
- Goods Receipt w.r.t. Subcontracting PO and Refer Subcontracting Challan at the time of GR (MIGO) {GR with 101 and autoconsumption of components with 543 movement}
- Reconciliation of Subcontracting Challan (J1IFQ)
- Completion of Subcontracting Challan (J1IF13)
- Generation of Annexure IV (J1IFR)
Master Data
- MM01- Material Masters for Components and FG
- XK01 - Vendor Master (Subcontractor)
- CS01 - BOM for FG
- ME11 - Purchase Inforecord for Subcontracting
Configuration: -
- SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Subcontracting Attributes
Here maintain following;
Excise Group         XX
Excise TT            57FC
Subtransaction Type 01
Subtran Type Text   57FC CHALLAN
Subc. Period        180
Rate-subcontracting
Mvt Grp Issues      0001
Mvt Grp Receipt     0002
Filter Non exise
EI Items            10
No. range no.       01
***. Val. /Exc Inv
Subcon Output Type J1IF
- SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups
Here maintain following
MVT. Grp. MvT S
0001      101 O
0001      541 O
0002      542
0002      542 O
0002      543 O
- J1I9 - maintain No range for object "J_1I57FC" for series group

Similar Messages

Sub-contract PO for FERT item

Hi,
We have a finished product (FERT) which is assembled In-house using several items.
The same finished product is also assembled at vendor's place.
At present we are going through service PO (MB21N) since we are not able to make a sub-contract PO for a FERT item. In this scenario how shoud we set the master data (MRP2 Procurement views). Is there any way we can do this?
Please suggest, its urgent.
regards
Shivkumar Kanti.

Hi
In Material Master, MRP View 2....for that FERT Product maintain Special Procurement Key: 30....
so when ever you run MRP.....automatically for that FERT product, Sub contracting PR with Item category " L" will be created....you can Convert this     SC-PR   in to SC-PO with Item category "L"
If you already maintained BOM    for that FERT Product...the components will be automatically exploded in SC-PO, Item Details,Material Data....
These Component you can send it to SC-Vendor useing T.Code: ME2O.....by 541Movent type...
After completion of the Assembling, you can get back the FERT product from SC-Vendor in MIGO, useing 101Movement type....that time the components you have provided to vendors are automatically consumed in   543 O-- movement type....
If there is any over consumption or under consumption of your components at SC-Vendor....SAP Best practice provides you the option of Subsequent Adjustment....
Reward if useful
Regards
S.Baskaran

Stand alone AR/AP credit memo for excisable item

Hello Excise experts
A sales return has to be accounted ,the invoice which was done in previous accounting software.When i tried to do AR credit memo, error showing stand alone AP/AR credit memos cannot be done for excisable items.How can we account sales return , where the corresponding sales was accounted in another(previous) software.?
Regards
Manoj

Hi
for Excisable item Standalone AR Credit Memo Cannot be created.... U have create a full cycle from Sales Order,Delivery,Outgoing Excise Invoice,AR Invoice then oly AR Credit memo can be created,AR credit memo cannot be created with out Base Document for Excisable Item..
Regards
NKS

Sub-contracting purchase for by-products

Hi
I am doing Sub-Contracting PO for By- Products. I have maintianed in BOM , the by-product material code in "-ive" qty.
Consider Material A - Main Product
Material B - By_Product
Material C - Raw Material
When i do GRN, Material A triggers 101 movement Tpe, Material B triggers 545-0 Moveent Type and Material C triggers 543-0 Movement Type.
But When i check the stock of material, Material B is lying as Vendor Stock.
Kindly let me know whether this transaction and movement type updation is correct.
Else let me know the steps.
I need to Receive Material A and Material B in my Stock.
Thanks & Regards
T.Madhesh Kumar

HI
Thanks for u r reply. But i need to receive the material A and material B same time during Goods receipt itself. Is there any possibilities that i can receive both the material in Un-restricted stock during goods receipt.
Thanks & Regards
T.Madhesh Kumar

MIGO for 100 items

Hi Experts,
My system is obstructing to make GRN for large entries(100 items) as When i view accounting entries in MIGO only 999 line items is possible. Can anyone help me out in extending the no of lineitems as i have to now post all my grns into two halves. Or some other means by which i can do migo for 100 items at one go.
Regards,
Ashutosh

SAP's note 117708 provides a modification. I am pasting solution below.
Via the summarization you can post documents with more than 999 items in
FI.
The modification required for this is small, in addition you have to
change 2 tables. The modification is carried out in FI not in invoice
verification.
To activate document summarization in FI proceed as follows:
- The changes are described in Note 36353 and for the
modification in Note 77161. You may also have to apply Note
67640 so that the document summarization affects inventory
management.
An advice for the notes:
36353: Solution point 3: Field name WERKS
77161: Solution point 2: Maintain table TTYPV with Transaction
SE16
- this has the following effects; you can no longer clear the
GR/IR clearing account on purchase order item level (but only
on purchase order level) and you can only display the FI data
summarized (also see Note 36353)

Doing MIGO for subcontract item

Hi Friends,
When I am doing MIGO for Subcontracting items, I can explode the BOM & see the child parts. At that time I can change the qty. & unit of measure for child products. Is it possible to restrict these.
I make BOM for the mail item & made PO accordingly.
Because of this the value of the main item may be valued at higher or lower, which is not correct.
Regards

hi,
the component u r attaching in the SC po, is planned consumption ratio, which is going to be used for conversion of finished goods-child material.
here when u r making the GRN for child material, always there should be flexibility of changing the component conusmption, as there is always differance in planned and actual conumption.
when u r sure that there is a change in conusmption pattern, u need to change the qty of the component while making the GR.
(as per SC challan referance)
if at after all goods receipt is done , and u observe the differance in component consumption, u can always adjust the same by MIGO_GS against PO-GRN.
u cant make the component field in MIGO as blank and which is not advisable tooo.
Edited by: manipal on Jan 8, 2008 6:15 AM

Proforma Invoice for Excisable item.

Hi everyone........
can any one tell me how to created a proforma invoice for excisable items.
Does A/P down payment or A/R Down payment satisfy my requirement?
Regards,
Meghana

Hi,
You can make performa invoice at A/R down payment Request .
Design PLD as per your requirment .
Regards
Deepak Tyagi
Edited by: Deepak Tyagi on Feb 14, 2011 8:42 AM

While doing GRN from Sub contracting materials with excise related

Deear experts,
I have an issue related to subcontracting process.I created sub con p.o for this i am issuing goods using 541 mov type & capturing sub challan .But while making GRN the excise tab is opening here i have to key in challan number .I maintained the challan number in EXCEL Sheet with more numbers ,now i have to copy the challan number in excise tab here i am facing a problem while copying from excel its taking only 11 line items it will not copying from excel all.For this how to make setting kindly explain me or send me the link.At the time of reconcilling using J1IFQ is also the same it copying only 11 line items only .Please revert it back as soon as possible
Thanks In advance
visu

Hi,
Check the following settings
SPRO - Logistics General - Tax on Goods Movements - India - Business Transactions - Sub Contracting - Subcontracting Attributes.
Check the no: of EI items that you have mentioned for your Excise group in the above settings.
Thanks & Regards,

TAXINN - Base Value in Migo for the item is ZERO

Hi,
We are using TAXINN Tax Procedure.
In MIGO Excise Item Tab, Base value is coming zero. Also it is updating in Excise Registers 23A part I & 2.
Can anybody tell me where i am doing a mistake.
Thanks in advance
KK

Hi Bharat,
Thank you very much for your quick response.
It is not intra company STO. This is normal procurement from the outside vendor.
Can you explain me why it is coming Zero
Hope it is clear for you
If you have any query, please do not hesitate to ask me
Thanks in advance
KK

Sub contract process with excise documents

Hi
I have a scenario in my project
MUM1- Mumbai plant
IN01    -Vadodara Plant
Mumbai is used only as a store for raw material (imported/Local)
Process is from Mumbai raw material (child component) is to be shipped to sub con vendor (1000) any where in India Ex -->Banglore
After processing Subcon vendor(1000) will send finish component to IN01 vadodara plant.
How the process will be mapped for Excise documentation.
required is Cenvat credit flow from Mumbai to Vadodara.
Regards
Ajit k

hi
Subcontracting under Full Payment of Duty
u2022     Creation of Subcontracting PO (ME21N)
here give the delivery add of vadodara palnt ,and the vendor of banglore
u2022     Transfer Posting of Components to Subcontractor (MB1B/ME2O/MIGO)
u2022     Creation of Outgoing Excise Invoice w.r.t. Transfer Posting Document (J1IS) - Used to send the components to Subcontractor's. Here 57F4 Challan is not created.
Accounting Entry: -
CENVAT Input BED - Cr
CENVAT Input ECS - Cr
CENVAT Input ECS - Cr
CENVAT Suspense A/c - Dr
u2022     Capture Vendor Excise Invoice at the time of GR of Finished Goods w.r.t. Subcontracting PO (MIGO)
u2022     Post Excise Invoice for FG received from Subcontractor (J1IEX)
Accounting Entry: -
CENVAT Input BED - Dr
CENVAT Input ECS - Dr
CENVAT Input ECS - Dr
CENVAT Clearing A/c - Cr
Master Data
u2022     MM01- Material Masters for Components and FG
u2022     XK01 - Vendor Master (Subcontractor)
u2022     CS01 - BOM for FG
u2022     ME11 - Purchase Inforecord for Subcontracting
regards
kunal
award if helpful

Downpayment for Excisable Items

Hi all,
How to Create Downpayment Invoice for the Excisable Items basing on Purchase order or GRPO? When I tried to do, I am getting Unbalanced Transaction Error. Pls revert me with solution ASAP
Thanks

Hi,
In Purchase A/P --> A/P Down Payment Request or A/P Down Payment Invoice.
In A/P Down Payment Request :
Based on Purchase order or GRPO you will create A/P Down Payment Request. In this document, you will see DPM field. In this field enter the Amount you pay for the supplier. Based on this A/P Down Payment Request you can pay the amount using Banking --> Outgoing Payments and pay the amount.
When you prepare A/P Invoice, You should prepare the invoice for the full amount(ie., without reducing the advance amount). While payment is made thru Outgoing payment it will show the Advance paid thru A/P Down Payment Request and A/P Invoice Amount. Select both the rows and make the payment. Automatically, the downpayment amount will be reduced and balance will be paid to supplier.
In A/P Down Payment Invoice :
Based on Purchase order or GRPO you will be creating the A/P Down Payment Invoice. In this document, you will entering the Advance amount in DPM field. Based on this payment will be made as explained above.
When you prepare the A/P Invoice, you will include the advance amount in the A/P Invoice in DOwn Payment Field. When you include the Down payment in A/P Invoice, the total amount will be reduced from the advance amount and the invoice will be prepared for balance amount.
Note. : In both the Down Payment Request or Invoice you should use "Tax Exempt" as Tax Code. (ie., Tax should be exempted.)
Raja.S

Freight amt to be included in stock for excisable item

Hi Experts,
What settings i have to do for including freight amount in stock for both excisable & Non Excisable Item.

If i will enter freight amount by landed cost, then i have to select an offset account for freight & since the bill for total invoice value goes into vendor account then how i will be able to clear the offset account for landed cost.
eg:
Item cost =100
Excise duty = 10.3 Rs
Freight = 200
that means 310.3 Rs credit on vendor account.

Out put for MIGO for multi items.

Dear All,
i am unable to take print out for Multi items in migo tranction. eventhough spool is not generating. If i select send immdiately option then document is update terminating, Document is not save. if i select 3rd optin " send by "send with application own tranction" then document will be saved and there is no spool as well as print option in Yellow colour.
plz suggest me for multi items printout. And also suggest me for can i maintain in Tr code MN21 for single as well as collective slip print option for single output type.
waiting for reply
regards
Ashok

hi ashok,
what is the output type you have assigned for the printing.
in mn21 you create a output type we03 with tr.event as we and print version as 3(collective slip ) at the time of Migo.
print indicator as 1.
you can also take the print in MB90.IN THIS you give the document no and processing mode as2 for reprinting and then execute.
Regards,
velu

Deleting and Adding components in a Sub contracting PO, for every line item

Hi,
I have requirement where in I need to change the Item category from Blank to 'L' for a given Line item, and for this Line Item I need to go to the Delivery Schedule lines and delete the existing Components and add new components to every Delivery Schedule line. This is going to be a LSMW object with a custom program.
I tried for recording ME22N, but couldn't do this as ME22N is not BDC friendly, and in ME22 the Item category field is Display only. I also tried with Function modules/BAPIs but nothing seems to be working out.
Can anybody help me get a solution to this requirement. Would appreciate a quick response as its a priority requirement for me.
Thanks in Advance,
Saleem.
Ph : +91-9845627631

1. You will definitely create two subcontracting info records for two raw materials say RAW1 and RAW2.
2. There will be two seperate production versions for these two materials.
3. Update respective production versions in respective subcontracting info-records.
4. This will help to upload the alternate BOM even you changed the material from PO
Amol

Capture and post list in MIGO for excise in return delivery

Dear All,
when I am doing return delivery in MIGO by 122 mov type and wants to capture and post the invoice at the same time.
the list apperaing only part 1 enty and no excise duty in selection list.
can anybody reply how to get this option added for capture and post
Regards,
Yashpal

Hi,
If u have done only GR for Both materials then Cancel ur GR and Post it again.
And if you have Done J1iex for first material then Cancel GR first then Cancel Excise Invoice.
Now to cancel Excise Invoice follow the path as
From the SAP Easy Access screen, choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods Movement (MIGO).
In the top line:
Select Cancellation.
Select Material document.
Enter the number of the goods receipt that you want to cancel
Choose .
Flag all of the line items as OK.
Save the reversal document.
Reversing CENVAT Postings
From the SAP Easy Access screen, choose Indirect Taxes ® Procurement ® Excise Invoice ® Incoming Excise Invoices ® Individual Processing ® Change/Display/Post/Cancel.
In the top line:
Select Post CENVAT.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Choose Simulate CENVAT.
A dialog box appears, showing which postings the system will make to reverse the CENVAT.
To close the dialog box, choose .
Choose Post CENVAT.
Canceling Excise Invoices
From the SAP Easy Access screen, choose Indirect Taxes ® Procurement ® Excise Invoice ® Incoming Excise Invoices ® Individual Processing ® Change/Display/Post/Cancel.
In the top line:
Select Cancel.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Save the excise invoice
if Not solved then please specify that is error by system.
Regards,
Pardeep malik

Sub contract migo for excise item

Similar Messages

Maybe you are looking for