Sub-contracting Quality Rejection issue in QA32.

Dear sir.
when i am returning material to vendor in QA32 , i am getting the bellow error .( it is sub-contracting return process , scrap quantity is also there.).
1 KG Incorrect posting back to vendor, error message:
Goods movement not possible with mvt type 546, M7 96
message number M796.
please help me out in this issue.
regards
JRP

Dear.
You receive error message M7096 "Goods movement not possible with mvmt type 546" right.
You can use Transaction OMJJ to include the table entries. Enter 546 as the movement type and select the 'Allowed transactions' option. Make the additional entries here.
Or,
Insert a new entry in table T158B.
Call Transaction SM31.
Table -> 'T158B' -> select the function 'view maintenance'
Select the function 'New entries'
Movement type (MvT):546, Transaction (Tcode):QA32; ENTER
F3 back; F11 save.
It will work for you.
Regards,
R.Brahmankar

Similar Messages

Sub contract po coproduct issue

Hi All,
In sub contracting process one(raw material) material is supplying to vendor .During single punching the process we are getting 2 products & scrap.For this process we are paying some amount to sub contractor.
While raising the Sub contarctor PO, raised aganist one product .Here iam able to maintain job charges for one product only .But at the same time it should apporinate to coproduct also.
I have maintained a bom for one product (header material) & i maintained second product as coproduct,raw material & scrap .In bom & material master for that material i maintained as coproduct
After maintaing this price is not apporinating to co product.Pls guide me how to solve this issue.
Regards
Vr

close not ansered

Sub-Contract Order Stock Issues

Dear All,
In Sub-Contract Order, i will create an Order for Finished product for X quantity & i maintain BOM(Semi-Finished Components) of Y quantity for the Finished Product. After approving the same the order was send to Sub-Contractor.
And Store In-charge issues these stocks to Vendor by 541 Mov-Typ in MB1B T-code.
In the same ways these Order's are placed to multiple Sub-Contractors.
Then how could i now, these stocks are issued to Vendor against these Sub-Contract Order's by Standard Reports.
Regards
JC

Thanks for your reply.
In MBLB report, i can see the stocks against Vendor Code. But if i place the same Materials for a single Vendor on Multiple Sub-Contract Order's. Then how come i verify the Stock report against Order's.
Regards
JC

Pricing Error in Sub Contracting Material

Dear Experts,
We are executing monthly costing run on plant level. There are some sub contracting materials system issues a message that '' No Price found'' while there is standard price maintained in materials master. what could be possible reason...Please suggest.....
Regards,
waqas

Dear Umar,
Thanks for your support,
I went through this post before posting my question. I know SCN Rules not new to SCN . The solutions suggested in the post are not feasible for my problem. I already tested this. All Master Data exists in my case on CO PP and MM side.
Please suggest the solution if u know!
Thanks...........

Price Difference in Sub contracting

Hi all,
I have a question on price difference on sub-contracting. The issue is, there is a sub contracting PO for Rs.100 for 10 units. GR is done for 100 units. Before the IR is done, there is a change in the PO price to Rs.60. Further of the 10 units which was received, 6 units have been issued out. Now the stock in hand is only 4 units. As there is a price change, the difference in the price to the extent of the stock availability is posted to Stock account (40/10*4 = 16) and the balance of price difference (for non-availability of stock) *shoud be* posted to price difference account.
Wanted to confirm from where is the price difference account is picked up for sub contract? Whether it is the GL account given in PRD or FRL in OBYC settings.
Also please throw light on how to stop the changing the price after GR and before IR.
Thanks in Advance.
Narasimhan.J

Hi Kishore,
Thanks for replying. Yes, we use MAP only.
I created a test scenario and changed the GL accounts at Transaction FRL - External activitiy in OBYC settings and could see that the GL account specified in the FRL is picked up to post the price difference.
To the extent of stock availablility it is posted to the FG account and rest is posted to the GL account specified in Transaction FRL in OBYC setting.
Regards
Narasimhan.J

Sub-Contracting material Issued to Vendor and balance to be Issud

Hi,
Sub-Contracting material Issued to Vendor and balance to be issued against the Sub-contracting Purchase Order.
Please suggest T.Code for the same. (Same Like ME2O, but PO number should be an input parameter)
For example I have Created PO with header Material for 1 quantity which having one child item and qty say 20 numbers, and issued child material to vendor 10 numbers (541) and balance is to be issued to vendor is 10 numbers, now I want a report which gives PO number, Header item with qty, total requirement of qty for the child item with line item number, issued child item with qty and balance to be issued child item with qty.
Thanks
Ramesh.G

Report MB51 is there. Here you have to input your Purchase order number and execute but, it will show only material issued to subcontractor through 541. It will not show the balance quantities.
And there is no such standard report which will show information how much issued to subcontractor and how much is balance based on Purchase order.
You can develop a z report with the help of abaper.

Issues in sub-contracting

in subcontarcting scenario i have one issue
issue 1:
Materials (both excisable and non excisable) are supplied to
subcontracting vendor.
At this time in 57Fc challan only excisable items are maintained.
But in sap while creating the sub contracting challan it is showing all
excisable items and non-excisable items.
But as per client requirement non-excisable items only should be displayed
while creating /reconciling/completing the sub contracting challan.
issue 2:
when semi finished material is returned back to client by sub contractor
some raw material is still with the vendor.
while raising sub contracting order to the vendor against the same
material ,system should pop up how much raw material left with that
subcontracting vendor .
Kindly give me solution for this scenario.

Hello,
All the materials which are declared for excise have to be maintained against the respective chapter ID's. Please refer the settings in excise rate maintenance.i.e j1id.
If only the non excisable items have to be appeared then only maintain the same.
Please check if it helps. As I suppose you will get the help in J1id.
Regarding issue 2:
Is it the scrap that is produced at the the subcontractors level or the main parent raw material which is left??
If scrap is left then that has to be mentioned along with the components provided at the sub contractors level.
If the parent material is left then it has to be checked at the stocks at the subcontractor level and brought back by GR against 101 mvt type.
The BOM has to be defined accordingly. If semi finish of 1 is to be produced by supplying 2 parts of raw material then mentioned only the one which is required. Do not supply additional extra Quantity.
Regards,
Prasanna.

Inter Plant sub-contracting Issue

Dear All,
I have the following scenario to be mapped.
Under one company code i have two plants(Plant 1000 & 1100)
Material 'A' is manufactured at Plant 1000 except one operation.
Material 'A' has 5 operations in the routing. Operation 1 to 3 will be performed in Plant 1000, 4th operation will be performed in Plant 1100 and the last operation will be done in Plant 1000.
In the 4th operation of routing, i have given the Plant as 1100 and the work center available at 1100 so that the capacity requirement will be booked at plant 1100.
My problem is how to track the Material movement from one plant to other plant. The material movements are as follows:
1. Sending the material from plant 1000 to 1100
2. Making sub-contracting challan for excise purpose.
3. Receiving the material at plant 1100
4. Sending back the material from plant 1100 after processing
5. Receiving the material at plant 1000
Please guide me to solve the issue.
Thanks & Regards
Bala

Hi Raj,
Thanks for your quick reply.
I tried the same, but problem is the receiving plant 1100 is not having any entries of Goods receipt and returning the goods to the plant 1000.
What i did was,
1. I created the plant 1100 as a vendor and assinged in the routing operation no. 4 with the control key PP02.
2. System has generated a Pur Req in the operation, then i did the regular External processing.
The problems in the above method are,
1. i am not able book the capacity of the plant 1100 since i am giving the control key PP02, system is not accepting the other plant and its work center in the routing.
2. There is no entry of the goods receipt and goods issue from the plant 1100 to Plant 1000.
Please suggest me a solution.
Thanks & Regards
Bala

Sub contracting Process issue for A/c entry

Hi All,
While doing the GRN for subcontracting process ,cost object error is appearing for stock change SFG account ( BSV).
Business would like to do not assign the Default cost object for change in stock account. Kinldy confirm whether it is possible to determine Internal order number ,whcih same assigned to GRN for stock in change account SFG.
Any alternative method would be apprecaite
Rgds
SumaMani

Thanks to all of us for answers !!
We solved problem as mentioned !
1. Created separate SFG Stock change over subcontracting GL account and assigned same in OBYC - BSV & profit centre wise internal order defaulted in OKB9 settings.Also created sub contracting expenses GL and assigned OKB9 profit centre wise. ( Problem has been solved with separate GL account of stock change over)
It can be possible to solve with using of substituion GGB0 with module pool RGGB0*
Rgds
SumaMani

Issue in Sub Contracting Purchase Requisition Urgent!!!

Hiii All,,
I have maintained a two BOM's for a finished material one for In House production and one for Sub contracting the components for the Two BOM's are different.
i have maintained Two Versions for the finished material also.
when i covnvert a planned Order to an Sub Contracting Purchase Requisition alternate BOM doesnt explode. i have also maintained a production version in the Purchase info record. Still the main BOM explodes.
i have to manually change the planned order and give the other production version ie not the Inhouse BOM.
After creating the PR then again i have to go planned order and change to the normal InHouse BOM.
Please Provide me the solution.
Thanx & Regards,
Kumar Rayudu

Hi Kumar,
BOM explosion occurs during MRP run and when you convert into purchase requisition.
If you are using procurement type "X", then logically system does not know whether you will be producing inhouse or go for external procurement.
You may consider to go for MRP areas or manually re-explode the BOM as you are doing now
Regards,
Jayakandan

Sub-contracting returns to quality

Hai Experts,
I have one scenario..
I have sub-contracting process. In which some time i used get componets return, which i need to take into quarantine location.
present i used to take material by using 542 MOVEMENT TYPE. But it is going to unrestricted area..
Which movement type i have to use for taking stock to quarantine.
waitting for experts suggestions.
suggestions will be rewarded.

Hi,
Use MIGO - Remove from storage (Mvt. Type: 303) and Place in Storage (Mvt. Type: 305)
Regards,
VB

Sub contracting vendor returns

Hi,
We have an issue that,
when we return to vendor a sub contract Finished goods from Quality Inspection
(T code QA32).System will return components(mvmt 544) also along with FG
but my clients want only the FG should be returned to Vendor not components
(becaz it is difficult to track all the components and becaz of excise recon-
cilation issues also)
What will be the solution.
Pl help
Thanks
Prasad

Hi,
We have an issue that,
when we return to vendor a sub contract Finished goods from Quality Inspection
(T code QA32).System will return components(mvmt 544) also along with FG
but my clients want only the FG should be returned to Vendor not components
(becaz it is difficult to track all the components and becaz of excise recon-
cilation issues also)
What will be the solution.
Pl help
Thanks
Prasad

Cancellation of 122 for Sub contracting PO

Dear Sir/mam
Child item send to vendor through 541and when Parent material is received we do migo 101 for Parent Material and stock is posted to quality,if accpeted it is in unrestricted but if rejected we post to return delivery and mvt type 122.Can i cancel the this document can i get some filed of identification that its it sub contracting PO.Problem is we have received the parent but we have send the child so if i had done 122 so child item po is open and i want to send the parent back through 57A4.So please throw some light how to track and resolve .
regards
kunal

dear
Kunal
Lets' Understance the situation.
You have send some material to vendor by 541(Child)
Now when material is returned
Assembly Number-Parent is 101
But all sub-assemblied-child items are with 543 mvt tye.
When you do return delivery to vendor
that is 122 mvt type Parent item has 122 mvt but child items has 544 mvt type(Reversak of 543)
So you can camcel the document MBST or send back material by 122 mvt (pareent +chield-544) by MBRL
In Document geenrated it will show 122 of Parent & 544 of Chield items.
I hope you are clear.
Regards
Sujit

Sub contract in sales

I need sub contract in sales.
Ex:
Customer sent material to plant they need some process in our plant for that I need scenario and configuration.
How we allow customer material into plant?
After finished work how to deliver products to customer and billing also.
Please help me any one

Hi Dharmananda rao
Sub Contracting Cycle :
(1) You have a material that can be procured externally, and you have maintained BOM with components. Any waste generated and received during subcontracting process can be maintained as component with negative quantity.
(2) You create a subcontracting PO (PO with Item Category L). You can also maintain Purchase Info Record for Subcontract category for material and subcontractor.
(3) You make a transfer posting to issue components for SC PO. Material is sent to subcontractor. As material remains under your ownership, system does not make any value entry. But quantity is shown as "Material Provided to Vendor"
(4) You receive finished material against SC-PO. You also specify components consumed in manufacturing of finished goods. Additionally, if you have negative components in BOM, now you'll also receive subcontracting by-products. There are three events, so three accounting entries are generated:
DR FG Stock/ SC By-Product Stock
CR Change in Stock (FG/ SC By-Product )
(for finished goods received)
DR Subcontracting Charges
CR GR/IR Clg
(for moneys payable to Subcontractor)
DR Consumption (Components)
CR Change in Stock (FG/ SC By-Product )
(material provided to Vendor is now charged to expense)
5) You do the IV for SC Invoice, and the process is complete.
Process of Subcontract in MM :
Sub-contract business process:
You want to buy material from the supplier (processed material/ assembled item) , but for some reason (quality of certain item / price ) you will give some component to vendor .
Vendor shall process the item / use the item provided & supply the final item.
SAP process:
1.Create the finished goods material code.
2.Maintain the BOM for the material.
3.Create PO with item category as "L" .
4.Issue material to vendor with movement type 541
5.Receive the material against the PO with movement type 101.
6.MIRO to account for vendor's invoice for the service charge& material used by him.
Can anybody tell me how a process has to be given to subcontracting?
Suppose, I have 3 operations 1)weaving 2)dyeing 3)cutting & packing
if no 2 process (i.e Dyeing) has to be given to subcontracting, what process should i follow ?
The following process to be followed for subcontracting.
1. Item code(material master) to be created at the stage of before dyeing.
2. Item code(material master) to be created after Dyeing as subcontracted item.(F30)
3. Bill of material to becreated for the material(2) calling for material(1)
4. Inforecord and source list to be created for material(2) with the corresponding vendor
5. PO to be released for material (2)
6.Along with PO the material(1) to be issued to vendor
7.On receipt of material when GR is made the stock with vendor will get updated.
How to Create a Subcontract Order?
To create a subcontract order, proceed as follows:
Enter the material you want to order and the item category for subcontracting (L) in the order item.
Press ENTER to display the screen for component processing.
Enter the components that the vendor requires to manufacture the product.
Please note:
You do not need to enter the date required for the components. This date is proposed by the system when you press ENTER.
It is calculated as follows:
Delivery date of the item - Planned delivery time
If you do not want the quantity of the components to be changed if the order quantity of the end product is altered, set the indicator Fixed quantity (column F).
You can determine whether the components are available on the date required by selecting Edit -> Availability check.
If you entered a bill of material as the material in the subcontract order, the components are created automatically.
If you want to determine the components in the bill of material at a later date (for example, if the bill of material is subsequently changed), choose Item -> Component -> New BOM explosion. The existing components are deleted and redetermined in the bill of material.
Save the purchase order.
When you print the purchase order, the components are printed per order item
Subcontracting - Key Points
Special Procurement Process.
Item category: L
Order type: NB
In info record vendor should be maintained as subcontractor.
Vendor (Subcontractor) receives the components used to manufacture a finished product directly from your company or through third party.
Your company should place a purchase order for the finished product. In this manually you can enter the required individual components or it can be determined via the explosion of BOM (if exists).
Stock check at vendor level: ME2O
Company stock check: MMBE
GR for individual components through movement type: 501 or 561 (if with out PO or without reference).
GI to subcontracting vendor: through movement type 541.
GR from sub contracting vendor: through movement type: 101
Movement type 543 is displayed to cancel the material cost account.
If the subcontracting order has to be generated through materials planning,the special procurement key has to be set in MRP 2 screen.
- To create the Subcon Info Record : Tcode ME11 - Info Category - Click Subcontracting
- To create Material BOM : Tcode CS01
- With the Info and Material Setup, you can then create the Purchase Order in Tcode ME21N
Reward if useful to u

Sub Contracting Problem.....

Hi.....
I have a problem in sub-contracting process. If the Row material quality is poor and issued to subcontractor then how I can exchange the issued material from the sub-contractor to row material vendor. please guide me what steps used for that..........
Thanks.

Do you use ME application for which this forum is tailored?

Sub-contracting Quality Rejection issue in QA32.

Similar Messages

Maybe you are looking for