Subcontract with source location in SNP

Dear APO experts,
finally go this message entered correctly.
can someone shd some light for me on the subcontract process in SNP and the integration to ECC.
Using SCM 7.0 and ECC 6.
Set up the subcontract proces in SNP and all work weel, apart from I cannot find the help to explian

incompolete message, please delete

Similar Messages

Source Location in SNP Heuristics - Planning Run

hi,
I am trying to execute a Planning Run for Manufacturing Location -> Depot model. The scenario is that a depot D1 can be supplied from 2 manufacturing locations ( M1 and M2 ).
Transportation lanes have been maintained as M1 -> D1 and M2 -> D1.
Stocks are available in both M1and M2.
When I take the planning run ( /sapapo/snp01 ), a purchase requistion is being created only from M1 ; M2 is not being considered as a source location.
Can anyone give some inputs on the same.
regards,
Anirudha

Hi! Anirudh,
SNP hueristic run on a standard logic in priority basis.
1) First it looks wheather quota is defined or not. if it finds an inbound quota it will create a purchase req to that location
2) if quota is not defined it looks for lane priorities defined
3) if there no lane priority it looks at per ton means of transport.
Please revert in case of any doubt
Regards
Vaibhav Sareen

Please advise on how I can find a source location using FM in APO-SNP

Hi All,
I'm able to get the list of orders using FM - BAPI_POSRVAPS_GETLIST3 but not able to find the source for the orders extracted using any function modules / BAPIs
Please advise.
Thanks
Venkat

Hi Venkat,
I hope you are getting purchase requisition list in REQUIREMENT parameter table of BAPI. In that you will find ORDID and PEGIN_GUID also which is nothing but the receipt at Source Location,search for this GUID in another parameter table of RECEIPTS, there you in LOCATION field you will see the source location from where that order is getting fulfilled.
Check in PEGGING_OUTPUT_NODES / PEGGING_INPUT_NODES parameter tables also whether source location is there in location field?
If this is not the case then, You are getting list of Purchase Requisition with their GUID/ ORDID.
Pass this ORDIDs to function module, /SAPAPO/OM_ORDER_GET_DATA, here you will get all the information relevant to any order in live-cache. I think first, you have to convert ORDID from CHAR32 to CHAR22 for input to this FM.
I hope now this will help you.
Regards,
Saurabh

Can't deploy web app with resource: New source location

          I can't deploy a web app (.war) if I already have a resource (.rar) deployed, weblogic
          7.0 reports
          weblogic.management.ManagementException: New source location, C:\projects\j2ee\dev\ra\dist\rware.war,
          cannot be deployed to configured application, rware. Application source is at
          C:\projects\j2ee\dev\ra\dist.
               at weblogic.management.deploy.DeployerRuntime.validatePath(DeployerRuntime.java:786)
               at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:319)
               at weblogic.management.deploy.DeployerRuntime.access$0(DeployerRuntime.java:282)
               at weblogic.management.deploy.DeployerRuntime$1.run(DeployerRuntime.java:947)
          The resource works ok, and the web app does not use or reference
          the resource (it's a simple servlet that just displays a message), so why is there
          an interdependence?


          Thanks! We'll follow up on this.
          >
          >I discovered the cause - the .war and .rar both had the same
          >filename root, i.e. myFilename.war and myFilename.rar. I
          >solved the problem by changing the .war to myFilenameWeb.war.
          >
          >And yes, this is with WLS 7.0.
          >
          >"Deb June" <[email protected]> wrote:
          >>
          >>Hi Glen,
          >>
          >>Could you please describe the steps that you took to get this?
          >>
          >>Thanks!
          >>
          >>P.S. For others looking at this - it looks like this is using WLS 7.0.
          >>
          >>>
          >>>I can't deploy a web app (.war) if I already have a resource (.rar)
          >>deployed,
          >>>weblogic
          >>>7.0 reports
          >>>
          >>>weblogic.management.ManagementException: New source location, C:\projects\j2ee\dev\ra\dist\rware.war,
          >>>cannot be deployed to configured application, rware. Application source
          >>>is at
          >>>C:\projects\j2ee\dev\ra\dist.
          >>>     at weblogic.management.deploy.DeployerRuntime.validatePath(DeployerRuntime.java:786)
          >>>     at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:319)
          >>>     at weblogic.management.deploy.DeployerRuntime.access$0(DeployerRuntime.java:282)
          >>>     at weblogic.management.deploy.DeployerRuntime$1.run(DeployerRuntime.java:947)
          >>>
          >>>The resource works ok, and the web app does not use or reference
          >>>the resource (it's a simple servlet that just displays a message),
          >so
          >>>why is there
          >>>an interdependence?
          >>
          >

Installer source location reverts to cd after selecting C drive with browse

When specifying the installer properties on the additional installer page, there is a box on lower right for specifying installer source location. For NI VISA Runtime 3.4.1, the location is set to D:\Vision 8.0.0 Acquistion Software. I use the browse option to set the location to C:\Programfiles ... but it won't save the new location. If I select another installer and then return to Runtime 3.4.1, the location is back to D:\ ... . When I build the installer, I get a popup saying it can't find the installer at D:\ . If I use the browse button to set the location to C:\ ... , the build continues successfully.

This is a known issue. There are many post out there (if you had searched) that will help you through this.
There are two ways to get around this.
Copy the entire contents of the CD to your hard drive and reinstall everything from there.
Have the CD handy and use the CD.
The reason why it does this is because is will always look for the last place it was installed from.
Joe.
"NOTHING IS EVER EASY"

Crystal Report runtime error while changing Data Source Location

Dear All
We are using "Crystal reports for SAP Business one".The Crystal reports version is 12.1.
We built a report in another database with another server.
As we are importing the report in another database of another server,
I am not able to change the Data Source location.
When I am trying to change it,it gives Runtime error and closed automatically.
How can i resolve and change the data source location?

hi kambadasan,
is your CR version the same from which you design the report and to the another server? also did you import your report directly to SBO without changing the data source first? in the case you should update first your Data Source in Crystal Report IDE before importing it to SBO.
regards,
Fidel

Publish a document from Document Workspace back to source location - missing option in SharePoint 2013

We intend to use Document Workspaces for reviewing all our Policies & Procedures.
Once all the changes to the document have been made, I am trying to publish a document from a document workspace back to the source location but the 'Send to: Publish to Source Location' option is missing in SharePoint 2013.
So instead I try to use 'Send to: Other Location' and copy / paste the URL from the original document library but this produces an error.
Has anyone come across this and if yes, know of a workaround?
A prompt response would be much appreciated.
Thanks in advance.

Thank you so much for your prompt feedback and response.
Once I click on the file (from the Document Workspace) and go File | Send to | Other Location and then I paste the URL from the original document library and test it and the link works. It shows me the document library of the original location. When I keep
the filename the same (as I want it to override the original document with the new changes) and then I press OK and then it produces the error? I don't know what I am doing wrong???
When I look at the second hyperlink as below I complete all the steps but after step 5 which settings do I enable in the Content Organizer: Settings & Rules? I doesn't state what I need to configure?
Enable the Content Organizer in the Destination Site
To enable the Content Organizer in the destination site, do the following:
Browse to the site you want files routed to.
Select Settings, Site Settings.
Under the Site Actions Grouping, select Manage Site Features.
Activate the Content Organizer feature.
Click Settings, Site Settings, Site Administration, configure Content Organizer Settings and Rules.
Your prompt assistance would be much appreciated.
Thanks

Broken Topic Links in RH8 with Source Safe

I'm using RH8 with Source Safe for version control. Whenever I open a project and RH retrives the files from Source Safe (on a network drive), I get a ton of boken links.
When I check the project folder on my local drive, all of the files are there, but RH is not reporting them correctly. RH easily fixed the links by selecting > restore. Then I save, then compile and check in all the project files, close the project.
When I re-open the project in a new directory, the same links are broken again.
Why do these links keep failing?

If the path is "c:\file.htm" this is an absolute path and means that the path only works if the source files are located in the same location (i.e in a location where the C: drive can be found. A path of "file.htm" is a relative path and means it is relative to where the source files are. In other words it doesn't matter where the source files are located, the path will work because it is "inside" the source file structure.

Cannot delete transportable module source location

Hi,
we're using OWB 10.2.0.1. Yesterday we created a transportable module for testing purposes and within the wizard a tm-source- and a tm-target-location. After deployment with control center it worked.
Afterwards we tried to delete all these new objects, first unregistering the tm-target-location, then deleting the transportable module and the locations. The problem is that the tm-source-location context menu doesn't show the delete action and therefore it couldn't be deleted.
Seems like the tm-source-location is registered in the control center, but it is not visible there.
I tried it with OMBPlus commands, too. But the answers after connecting to the control center and the design repository are always the same. When trying "OMBUNREGISTER LOCATION 'tm-source-location'" the answer is "Location tm-source-location is not registered.". Using "OMBDROP LOCATION 'tm-source-location'" results in "PUB01010: Object is not deletable.".
Is there a chance to delete the location directly manipulating the owb tables?
Any help would be appreciated! Thx.
omit

After creating the transportable module and its source and target locations I tried to register them in DEFAULT_CONTROL_CENTER, but got an error (I can't remember the issue in detail, but it was anything like a connection problem). So I created a new control center location CONTROL_CENTER1, connected to it, and got the locations registered and deployed the transportable module.
Later I figured out that I don't need the transportable module for our purposes and in first step, as I can remember, I deleted the control center location CONTROL_CENTER1. Next step was deleting the transportable module, unregistering und deleting the tm-target-location and the other steps I described before in earlier posts.
How can I get more information about the registered tm-source-location? To which (not existing) control center it is connected and so on? In RAB I can see and unregister the location, but I don't know for which control center this action takes place.
Thx for your replies.
omit

Chaging source Location in database

Hi All,
I created a couple of mappings in OWB using MV as a source now our client wants to move those MV's to another schema so does changing the MV's schema have any effect on my mappings if so how can i point the MV to right location.
Thanks

Hi,
Yes changing the schema will have impact on the mapping. It will give table or view does not exists error.
Do the following if the source location is registered with the control center.
1)Connect to the control center manager
2)Unregister the location(Right click on the location and select 'UnRegister')
3)Now edit the location and change the Username, p/w and schema fields to reflect the changed schema
4)Finally register the location with the control center.
Regards,
Pnreddy

Subcontracting with slaes order

hi i want to know
how can we do the subcontracting with sales order
i got a process using 311 e movemnt when i search on SDN
plz let me know if this process is correct how can i have subcon challan
Subcontracting scenario(Sale Order wise)
Subcontracting For Sales order.
Subcontract Account assigned PO
how can i create storage loc as vendor
plz help
regards
raj

Hi,
Subcontracting for Project Stock: -
Purpose: - Subcontracting is also possible in conjunction with Project stocks. The subcontracting orders are account-assigned to a Project. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the Project stock the time of the goods receipt. The material manufactured is also posted to the Project stock.
The cost of subcontracting is then debited to the Project.
Since the components are not transferred to the "stock of material provided to vendor", it is recommended that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the Project stocks.
Features: -
Withdrawal from Stock of Mat. Provided for Project: -
For components that are managed in Project stock, you can define whether the components are to be withdrawn directly from each Project or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
You can maintain this indicator in the following places:
In the MRP view of the material master record (MRP 4)
In the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types)
Configuring the explosion types has priority over the configuration in Inventory Management.
If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from Project stock.
Regarding Subcontracting Challan: -
Go to OMJJ, select the field "movement type" and press enter
Enter movement type "311" and double click on "Field selection (Enjoy)" under Dialog Structure on left side.
here "New Entries" and add field "LIFNR" (Vendor)
Now in MIGO, at the time of transfer posting of components using movement type "311 Q", specify the vendor code of the Subcontracting PO (i.e. Subcontractor)
Now create Subcontracting Challan in J1IF01 for material document of 311 Q movement type.
Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0001", Movement Type "311 Q" should be maintained.
Then do GR against PO and refer the Subcontracting Challan here.
And then do reconciliation in J1IFQ for the GR Document against Subcontracting Challan.
Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0002", Movement Type "543 Q" should be maintained.
Follow the below mentioned process;
Process Steps: -
1. OX09 - Create Storage Location as "9999" for Subcontractor Location
2. MB1B - Do Transfer Posting of material from RM Warehouse to this Storage Location via movement type "311 Q" (Instead of doing 541)
3. Now go to J1IF01 - here use material document of movement type "311 Q" and create Subcontracting challan. (If required)
Prerequisite: - In SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > Here for Movement Type Group "0001" (For issues), maintain movement type "311 Q" also along with 541.
Rest all, refer subcontracting challan during GR and then reconciliation and completion, etc... will be same as usual.
Note: - At the time of GR, consume components from storage location "9999" (for 543 movement type)

DP content source location not written to database - Invalid path \\server\share format needed - 80070002

Hi All, i just wanted to ask if anyone else had experienced this issue yet?
We have ~200 Pull DP's and for some time have been having issues with OSD Task Sequences randomly failing with the error 80070002.
More specifically:
Invalid path. \\server\share format needed
Failed to find an available source location
Our Task sequence is configured to access content directly from the DP. We checked the PackageShare$ and validation state and both were fine. Next we inspected WMI (root\sccmdp:SMS_PackagesInContLib) and this was fine as well. Until today,
we had been redistributing the failing package to remediate, but this is very time consuming with some of the large WIMs and Driver Packages, especially over some very slow WAN links.
Today I decided to explore this a little further by examining the Database..This led me to the table ContentDPMap and the two columns in particular 'URL' and 'URLSubPath'.
I noticed that the packages we were having issues with had a URL of the ServerName in UNC format, and a URLSubPath of just '\'. Other packages had a fully qualified UNC path to the package for URL and a full sub path for URLSubPath.
When we queried the DB further, we revealed 1190 packages to be in this state (for packages supposed to be in the share) out of a total of 42,000 records.
The query we used for this was:
select ContentID,ServerName,AccessType,URL,URLSubPath,URLProtocol,vpkg.Name from ContentDPMap as cdpm
join v_Package as vpkg on vpkg.PackageID = cdpm.ContentID
where cdpm.AccessType = 2 --UNCProtocol
and cdpm.URLSubPath not like '%SMS%' --Packages with issues only have a '\'
and vpkg.PkgFlags = (vpkg.PkgFlags | 0x80) --Limit to only show packages with the 'Copy To Package Share' flag set
Also of note, when a package is marked with a State = 2 the values for URL/URLSubPath are NULL. (State =2 is In Progress).
So my question:
Firstly, has anyone else encountered this?
Secondly - how should I fix it - we tested in our DEV and found that updating the entries remediates the issue with Clients not being able to locate content, but realise this is is an unsupported method.
I will also log this on Connect as it appears to me to be a Bug.
Cheers,
David

Our Task sequence is configured to access content directly from the DP. We checked the PackageShare$ and validation state and both were fine. Next we inspected WMI (root\sccmdp:SMS_PackagesInContLib) and this was fine as well. Until today,
we had been redistributing the failing package to remediate, but this is very time consuming with some of the large WIMs and Driver Packages, especially over some very slow WAN links.
Hi,
So redistributing the failed package could resolve this issue?
How about using prestaged content to distribute these large contents?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to pass version number from source location to records center?

When designing our record management approach, one of the requirements from business is to pass the version number from the source location to records center. They need to know which version has been declared as a record for the same document.
Is there a way to implement this (OOB)? Thank you.

Hi,
Based on your description, my understanding is that when you sent a document to records center, you want to pass version number from source location to records center.
When a document is sent to the records Center, we keep its version number as assigned in its original document library as metadata that is submitted along with the document to the Records Center (in the “Properties” sub-folder of the document library in
the Records Center).
Automatically synchronizing that version number directly into the versioning system in the Records Center is something we should probably consider for a future version, but even in the current version we definitely don’t lose that information.
Hope this helps clarify.
Refer to the following article:
http://blogs.msdn.com/b/recman/archive/2006/08/24/715883.aspx
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

HTTP to File with source XML validation

Hey guys
i have a HTTP to File scenario wherein i m getting XML over HTTP from an external system.i need to perform a validation check on this payload and if the check fails then i need to send this payload as a mail attachment to a certain address,if check is successful then i need to post this XML to the File server.
i have done simple scenario without any validation but now i need to upgrade and perform validations,do i need to do that in Message mappin?
some links will be really helpful
thanx
ahmad

Hi,
I hope the following two ways are possible.
1)
Maintain one message as source and two messages as target.One is actual message and second one message structure should containt the structure with error details with source details.
Validate the message in MM with UDF.
If the source is valid then assign the msg to correct target messages.and ResultList.SUPPRESS to suppress the second message
Else then assign the error details with source details to second message.and ResultList.SUPPRESS to suppress the first message
Be sure that the target messages occurrences are 0..unbound or 0..1
then use the IM in interface determination.
and maitain two CCs one for actual receiver, second for MAIL receiver with HTTP attatchment.
2) You can raise an alert from payload. in alert you should maitain the mail, su01 mail id , designated reciept.
See the below links
Alerts with variables from the messages payload (XI) - UPDATED - /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Triggering XI Alerts from a User Defined Function - /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
Regards
Chilla

Subcontract with source location in SNP

Similar Messages

Maybe you are looking for