Success messages won't appear

Hi,
None of my messages appear. I've made sure that show Success
message checkbox is checked. Any ideas?

Nowhere near enough information, " kimmarieforbes".
Are you working with click-boxes? Buttons? Text-entry boxes?
What is the "action" for a success? How much time is set for the
slide? How much time for the click-box itself? Or is it a button?
If so, how much time is it set to be "active"? Inactive? Or maybe
it's a text-entry box. If so, what is the keyboard shortcut, if
any, and how long is the text-entry box set to appear . . . what
other objects are on the slide (in addition to the interactive
object you are referring to here) and what are their times and
other pertinent properties?
<rant>
These forums are known to be among the best support forums in
the world and we're proud of that - but c'mon - we are NOT in the
room looking over your shoulder - remember? We are waaaaay out here
in another part of the world without a clue abgout your issues
except for what you give us. The only "picture" we have of your
problem is the one you paint with words, so - if you really need
help - do a little background work and at least fill us in a bit.
<end rant>
.

Similar Messages

When I respond to email the original message won't appear. Why is this?

When I respond to email the original message won't appear. Why is this?

Check Mail/Preferences/Composing/Responding to make sure the box is checked for Quote the text of the original message.

Messages Won't Appear on Device if Outlook Desktop Is Open

If my Outlook is running on my desktop, new emails won't appear on my handheld. How do I get my messages to appear on my device when Outlook is running?
Once my Outlook receives emails that my handheld received earlier, the messages seem to disappear off the handheld device.
Message Edited by aratzky on 11-25-2008 01:59 PM

it depends on how is your Outlook configured to fetch the emails. Do you leave them on the email server ? If not, then once Outlook has swallowed them, the Blackberry device can't see them on the server.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Inbox messages won't appear on Mail

My ymail account won't sync to my Mail. I'm on OS X. I'm not too sure what happened. All my other accounts like hotmail and another yahoo mail are synced and I can access my messages. I tried deleting the account but it's still the same.

it depends on how is your Outlook configured to fetch the emails. Do you leave them on the email server ? If not, then once Outlook has swallowed them, the Blackberry device can't see them on the server.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Custom Group Message Won't Appear

I go to "Details" in the group message and pull down on the screen and nothing appears. Where is the custom group message field? Am I missing something?

Hello there, rygar.maximus.
The following Knowledge Base article offers up some great clarification in regards to the features of group messages and iMessages:
Send a group message with your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5760
Name a group message
You can name group iMessage threads. While viewing a conversation, tap Details, in the upper right. Then drag down and enter the name in the Group Name field.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

http://support.apple.com/kb/TS3281

External USB hard drive won't reformat, won't appear in Finder, error: Unable to write to the last block of the device message

So I just got a new MacBook Air and since I had an external USB hard drive (TOSHIBA MQ01ABD100 1TB) lying around, I decided to use it for back-up. Since I only have just the one hard drive, I decided to partition it into two - one for Time Machine backups, and one for general files (formatted FAT so I could use it with Windows). However, the partitioning failed and I ended up with a partition named disk1s2. Plus, it won't appear on Finder anymore, but it appears in Disk Utility.
I have tried to reformat it, but I always get the message "Unable to write to the last block of the device".
Here's the info about my drive:
Name: TOSHIBA MQ01ABD100 Media
Type: Disk
Partition Map Scheme: GUID Partition Table
Disk Identifier: disk1
Media Name: TOSHIBA MQ01ABD100 Media
Media Type: Generic
Connection Bus: USB
USB Serial Number: 1220069C
Device Tree: IODeviceTree:/PCI0@0/XHC@14
Writable: Yes
Ejectable: Yes
Location: External
Total Capacity: 1 TB
Disk Number: 1
Partition Number: 0
S.M.A.R.T. Status: Not Supported
And here's for disk1s2:
Name: disk1s2
Type: Partition
Disk Identifier: disk1s2
Mount Point: Not mounted
File System: Mac OS Extended
Connection Bus: USB
Device Tree: IODeviceTree:/PCI0@0/XHC@14
Writable: Yes
Capacity: 999.86 GB
Owners Enabled: No
Can Turn Owners Off: Yes
Can Be Formatted: Yes
Bootable: Yes
Supports Journaling: Yes
Journaled: No
Disk Number: 1
Partition Number: 2
Here's what it says when I run diskutil in Terminal:
Device Identifier:        disk1
Device Node:              /dev/disk1
Part of Whole:            disk1
Device / Media Name:      TOSHIBA MQ01ABD100 Media
Volume Name:              Not applicable (no file system)
Mounted:                  Not applicable (no file system)
File System:              None
Content (IOContent):      GUID_partition_scheme
OS Can Be Installed:      No
Media Type:               Generic
Protocol:                 USB
SMART Status:             Not Supported
Total Size:               1.0 TB (1000204884480 Bytes) (exactly 1953525165 512-Byte-Units)
Volume Free Space:        Not applicable (no file system)
Device Block Size:        512 Bytes
Read-Only Media:          No
Read-Only Volume:         Not applicable (no file system)
Ejectable:                Yes
Whole:                    Yes
Internal:                 No
OS 9 Drivers:             No
Low Level Format:         Not supported
I didn't have any data in it prior to the failed partitioning attempt, so there aren't any worries of data recovery. But I'd really like to be able to use this drive again, and save some money (external hard drives are expensive where I live). Anyone with any ideas?

I'd also like to add that repairing the disk using Disk Utility does nothing but tell me to reformat the drive. So I'm stuck in a loop here.

My device won't appear on desktop of DataViz'z Documents to Go. Help?

Anyone out there solved the "Device won't appear on 'Documents to Go' desktop" I've tried several times and DataViz Support basically sent me their trouble shooting document which I had already gone through and tried but no luck. They have wiped their hands of the issue and said Good luck.
The problem is that I can't synch Documents to Go (ver. 1.1) on my iPod Touch (1st gen) with OS3.0 with the DTG desktop. My device won't appear on the desktop. I my desktop is a MacBook Pro 17" with latest OSX 5.7
- I don't get any specific error messages; the device just doesn't show up in the DTG desktop window
- my internet connection is fine and both apps are on the same WiFi network
- my Firewall settings are set to "Allow all incoming connections"
- also tried setting Firewall set to allowing just DTG
- I successfully installed and ran the iPhone/iTouch app "Remote" (it shows up in iTunes
This is weird. I've had pretty good luck syncing any and all iPod Touch apps with the Desktop, but not being able to do this one pretty much renders Documents to Go useless.
Any suggestions?
Thanks
Jim

I solved my own problem. The device was there all along. However on my iPod Touch I noticed I have no user name - - it is just a blank. So it appears in DTG desktop as a blank line which looks invisible to me, i.e. no device. But if I click on the blank line, there it is: a successful link and My DocsToGo.
I discovered all this by syncing my wife's iPhone, which does have a visible name.
Now I just have to figure out why my iPod Touch has no user name.
Thanks
Jim

None of the buttons work and screen won't come on? Won't appear in iTunes either

The iphone was dropped and the back glass smashed, and the back plate was taken off so battery visable, camera is detached from phone. It won't turn on now not even when put on charge, from the back you can see the back light of the screen but nothing is actually displayed on the screen.
Won't appear in the iTunes window and a error message comes up something like Eox000085?
Is it fixable or totally screwed?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When I plug my ipod touch into the computer it just charges and won't appear on itunes!

when I plug my ipod touch into the computer it just charges and won't appear on itunes!

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Service Desk message does not appear in DSWP

Hi,
I'm currently configuring Service Desk in SolMan 4.0. I noticed that the service desk messages are created successfully from the satellite systems as they generate a message number that appears in CRM_DNO_MONITOR of the Solution Manager system. However, when I check in tcode DSWP --> Operations --> Service Desk, no message appears in the list. I have only used SLFN message type but nothing appears even if I filter the seach for it.
Can anyone help me solve this?
Thanks,
Regina

Hi,
I have seen them now in SAP_SLFN_STAND. It has been working after all.
Thanks anyway!

Process Success Message not displaying properly

Hello.
I know there are many threads about this problem. But i can't get it right.
I have custom MRU process like:
DECLARE
p_updcount NUMBER := 0;
BEGIN
FOR i IN 1 .. apex_application.g_f08.COUNT
LOOP
    IF apex_application.g_f08 (i) IS NOT NULL
      AND substr(APEX_APPLICATION.g_f20 (i),40) !=
      wwv_flow_item.md5 (apex_application.g_f07 (i),
                apex_application.g_f08 (i),
                      apex_application.g_f09 (i),
                         apex_application.g_f10 (i),
                         apex_application.g_f11 (i),
                         apex_application.g_f12 (i),
                         apex_application.g_f13 (i),
                         apex_application.g_f14 (i),
                         apex_application.g_f15 (i),
                         apex_application.g_f16 (i),
                         apex_application.g_f17 (i),
                         apex_application.g_f18 (i),
                         apex_application.g_f19 (i)
                         )||'" />' THEN
     UPDATE table
          SET ...
       WHERE id = ...;
      p_updcount := p_updcount + 1;
    END IF;
END LOOP;
:P232_UPDATE_NUMBER := p_updcount;
END;
{code}
In the same process, success message looks like:
Number of updated records: &P232_UPDATE_NUMBER. .
Item :P232_UPDATE_NUMBER is text item.
Even if i set default value in item, it doesn't work. Value is shown in item, but not in message.
Message looks like: Number of updated records: .
Items "Source used" is set to Only when...
If i set it to Always, ..., value doesn't appear in item.
Any idea?
Thanks.
Regards,
Dejan

Hi,
If i write code to check for updates after header, it is not necesary true that the user already updated some columns?Or am i wrong?>
The Custom MRU has to be OnSubmit. I was talking about initialization of the Page Item
To set the value of the item in Session State set the value using Before or After Header Computation or Process.E.g. write After Header Computation for P232_UPDATE_NUMBER > Static Assignment > 0
. I am not referring to Custom MRU.As I said earlier, if your CustomMRU process runs you should see a number >= 0 in the message. You will need to initialize only, to say 0, only for situations when the Custom MRU does not run (condition evals to false).
Cheers,

Mail account doesn't work properly, deleted messages keep re-appearing, others seem to disappear and reappear at random.

deleted messages keep re-appearing, others seem to disappear and reappear at random

I have the same problem. Thankfully one which was missing came back. I printed it out and made a PDF of it since it was an important one I'd been looking for.
I have three icloud email accounts which folders for each one. Now they mostly come up in my inbox instead of the correct folder and they won't move to the correct one.
Come on Apple, fix this.

ADF 11g:Success message on fire fox Staus bar

Hi all,
Im working on ADF 11g - Jdeveloper 11.1.1.2.
The page contains a ADF table with Create, Edit and delete operations. The success messages of these operations have to be displayed on the staus bar of the Fire fox browser.
Ex: "Record Successfully created" whenever there is a successful insertion of a record in the ADF table.
How to display the user generated message on the staus bar of Fire fox? Please help....
Thanks,
Manasa.

I'll bite. Presumably you're trying to mimic the same functionality from Forms. Firstly I'll flag that you need to convince users that browsers aren't Forms, and they do things in their own ways. A typical browser user doesn't look to the status bar for messages from an application, the status bar is reserved for browser raised messages.
Yet I also understand it's hard to bend such requirements, so in addressing that requirement specifically, my understanding is the ADF framework doesn't provide this functionality out of the box. You will need to build your own. As a start independent of ADF there appears the ability in Javascript to write to the browser status bar through a function called statsword: http://www.htmlite.com/JS017.php
At this stage I've no inspiration on how to build this in to an ADF solution (it's far too early in the morning), maybe another reader can help, but I suspect a solution might use the ADF af:serverListener and af:clientListener tags.
CM.

Images won't appear in local preview

Hi. I have a page I laid out in dreamweaver. It looks good.
When I try to add new images, I can see them in the layout,
but they do not appear when I do an F12 preview.
My old images that do appear are in the same folder as the
new ones I'm trying to add that won't appear.
I tried to copy an existing image that appears and pasting it
--they both appear in the layout, but an F12 preview only shows the
old one even though it is the same image.
I even tried to open a dreamweaver tutorial, insert and image
and preview it, and it didn't work.
Can anyone help me please.
Thank you,
Melissa

This usually means that you are linking with root relative
links. Enable
Preview using Temp files in your Preferences, and then you
will see them.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"actrihop" <[email protected]> wrote in
message
news:f0irm3$hli$[email protected]..
>
> Hi. I have a page I laid out in dreamweaver. It looks
good.
> When I try to add new images, I can see them in the
layout, but they do
> not
> appear when I do an F12 preview.
> My old images that do appear are in the same folder as
the new ones I'm
> trying
> to add that won't appear.
> I tried to copy an existing image that appears and
pasting it --they both
> appear in the layout, but an F12 preview only shows the
old one even
> though it
> is the same image.
> I even tried to open a dreamweaver tutorial, insert and
image and preview
> it,
> and it didn't work.
> Can anyone help me please.
> Thank you,
> Melissa
> --
>
>

Success messages won't appear

Similar Messages

Maybe you are looking for