Summing Track Stack not properly saving as a patch???

Hey Guys,
So...
- I created a Yah-Yah talking bass with the FM setting on the Retro Synth
- used a bitcrusher to create the formant effect by downsampling
- Then I created a new track for a sub bass sound seperate from the Yah-Yah
- I put both the Yah-Yah and the Sub Bass into a Summing Track stack.
- With the Track Stack selected I clicked Save in the Library Named and saved as a Patch, Yah-Yah Bass
Then when I Create a new track and select my Yah-Yah bass Patch from the library The track stack pops up with some random channel strip settings with busses added and I'm confused as ****. I never had any buses on the original track stack to begin with so where'd they come from???

It’s possible some of the open images were not in a folder being managed by Elements (normally a sub-folder of Pictures or My Pictures) and you did not notice that only add to Organizer was checked and version set was grayed out. That’s the reason you had to import them.
If you always open from a sub-folder of the watch folder (normally My Pictures) your edits will get added automatically to a version set.

Similar Messages

Scans from HP C4680 are not properly saved after upgrade to OS X 10.9

After upgrade to OS Mavericks all-in-one HP C4680 does print and scan however scans are not properly saved. Saved file in preview shows grey bands; text is not readable.
Driver update from HP support didn't resolve the issue, nor any workaround suggested in HP community.
Issue is appaerently not unique for C4680 but also other HP equipment.
Has anyone encountered this malfunction? If yes were you able to resolve it and how?

Your screenshots are not appearing for me.
Uninstall PC Tools "iAntiVirus" and "MacKeeper" according to their respective instructions. Confirm their thorough, complete, and permanent eradication from your Mac, and evaluate the results.
Other problems exist, including what appears to be a modified Hosts file. If you know the reason for its modification, proceed on the basis of that knowledge. A remote access tool known as Teamviewer is also installed. If you no longer require it, uninstall it.
Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper. Earlier versions than the one released in 2012 require more extensive work to uninstall all its components.
If you actually used MacKeeper to alter your system, e.g. "remove excess binaries" or such, you will need to reinstall OS X as well as all your additional software. Uninstalling MacKeeper is insufficient to reverse the corruption it is capable of - once again, that is if you used it.
If you merely installed MacKeeper but did not use it to perform any particular action, the following instructions will suffice.
If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
Quit the MacKeeper app if it is running.
Open your Applications folder: Using the Finder's Go menu, select Applications.
Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
You will be asked to authenticate (twice):
You do not need to provide a reason for uninstalling it:
Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.

Restoring a document not properly saved?

I exited Word without apparently properly saving a document. I have a Time Capsule, but the document does not seem to be there either. Any techniques for finding a document recently worked on?

Word actually claims it will "AutoSave". So even if the user has not saved, Open Recent should list the file if it had been worked for longer than the setting in Save options.

Default cell values for column not properly saved in uir file in labwindows 2009 (9.1.0 427)?

I've run into a strange problem with the table control. Basically, even though I set default cell values for a particular column as numeric, when I try to add items to the list it tries to add them as strings, and returns an error message that it is expecting *char instead of int. Furthermore, when I open the uir file that contains the table in question in 2010, it appears as if the default cell values for that column are still set as strings, even though in 2009 when I open the uir file it shows as numbers. I tried converting the uir to C code, and sure enough the C code indicated that the column still is a string type.
I've gone ahead and made a small project to show the issue. If you open this project in labwindows 2009 and click on the table in the table_bug.uir, and edit default cell values for column 1, you will see that the cell settings have type as numeric and data type as int. When you run the project, however, it will fail with an error message saying that it is looking for a *char. When this same project is loaded into labwindows 2010, clicking on the table in table_bug.uir and edit default cell values (column 1) shows the type as string. When I change this to numeric (and change numeric attribute to int), this runs fine in 2010. I tried simply changing the uir in 2010, and then using it in 2009, but 2009 complains that the uir is from a newer version (understandable). If there is any workaround that would let me continue to use 2009 for the time that would be great.
Any help would be greatly appreciated.
thanks,
Alex Corwin
Solved!
Go to Solution.
Attachments:
table_bug.zip ‏324 KB

I opened the UIR in 2009 (but I have 2009 SP1) and it still showed that the default value for the first column was a string. I didn't have any problems changing it to a numeric int, and then building and running the project without error.
Here are a few things you can try:
1) Change the default value to a string. OK out of the dialog, re-enter the dialog, and change it back to Numeric int. Resave and see if the problem has gone away.
2) You said you get a ".UIR is from a newer version" error when opening the 2010 UIR in 2009. Does the UIR still open if you click okay? Often times this will work just fine. Assuming you don't have any problems with this, make a minor change to the UIR in 2009, such as moving the table to the left, and then back to the right and then re-save. See if your program works now.
Kevin B.
National Instruments

Track Stacks won't open correctly

When I save a summing track stack, it saves fine in the library. But when I open it up, it opens up the same channel strips, but not stacked at all! Can someone please tell me how to do this so that it opens up just like it saved?
Thx
Felix

Thanks. That file doesn’t exist, probably because I’ve un-installed and re-installed FCP Suite a couple of times. There must be a corrupted file somewhere that doesn’t un-install but where?
DVD Studio still doesn’t fully open and all of the drop-down menus (File, Edit, etc) including the Apple menu are transparent.

MainStage patches not loading Guitar Rig 4 patches

I'm trying to use Guitar Rig 4 as a channel strip plugin for live EG performance. Unfortunately Mainstage seems unable to properly recall assigned Guitar Rig patches and/or recall screen mapping for those patches. It seems like it only loads the first GR4 patch. If I open up the plugin I see the correct GR4 plugin name but when I double click it seems to then load.
I've mapped screen controls to specific editable functions within Guitar Rig 4's patch. Unfortunately after reboot Mainstage patches do not properly load Guitar Rig patches and screen control mapping breaks.
For instance within a specific Mainstage patch, I have a Guitar Rig 4 patch that has a stereo delay. I screen map to the stereo delay's controllable functions (mix, feedback, etc). I test it out and everything works properly. I save. I restart and then the screen controls lose their mappings.
So what's up? Is it a user error or a limitation between the two softwares?
Andy

Hi again,
OK so to map a MS toggle switch to activate an event in a Plug-in like Guitar Rig 4?
- You have Pedalboard as an insert in the channel strip?
- You have Guitar Rig as an insert in the channel strip?
- if so
- selecect the unassigned button in Manstage edit mode
- MS will open the screen control inspector panel below the edit view of your MS edit window
- In the third tab 'unassined' of the inspector you sohould see columns make sure you're looking at the left most col
- You will find the name of the channel strip (guitar-1) or something like that - select it
- The next col will fill with info on the channel strip including the inserts - select Guitar Rig 4- The next col will fill with all the attributes of the Guitar Rig patch you've selected as an insert
- The list will contain all the controllable attrubutes of the componants that mack up the guitar rig patch.
- Select the WAH/ON/OFF or what have you.
- Now the switch in MS will control the ON/OFF state of the WAH efect in that Guitar Rig patch.
The same process works for rotary knobs so you can have MS contol the ON/OFF function and allow you to adjust say the Gain and Tone of your choosen Guitar Rig effect. Obviously you can use for Amps/effects/Cabs/and even Tapdeck etc.
Once you have a channel strip set up and your happy with the layout of MS you can save the channel strip and use it in Logic and vise versa - so I have started a library when my guitar and bass patches are channel strips.
This is because I mix up componants of the various Plig-ins I have say - Pedelboard => Ampdesigner => Guitar Rig 4 => Amplitube 3 => and Redwirez as a single 'patch'. So playing live I use the appropriate 'patch' strip in MS and when recording the I use same 'patch' strip in Logic.
Have fun!

Audio track edits not saved

I am using Captivate 4. I have a group of files where any edits I make to the audio track are not saved. The audio plays back fine in the audio editor. It just will not save the changes I make to the audio track (cut segments, add silent segments, etc.) I make a change, click OK in the audio editor, close the editor. When I reopen the editor the changes are not saved. I tried uninstalling and reintalling Captivate. I tried saving the file under a different name. Any ideas why this might be happening and if there is any workaround? thanks.

Hi there
You should ensure that Captivate has been updated to the most recent release. The developers released an update after the initial release. Additionally, you may need to follow what is outlined in this blog post. I had to do that on my PC.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Create stream from csv in Stream Explorer: Source has not been saved properly

I'm creating a demo application with Oracle Stream Explorer, but uploading a file does not work the way I expected.
I go through the wizard "Create Stream" and upload a 500kb csv file.In the final step I click Create, and a message pops up:
Source has not been saved properly
Unable to deploy OEP application
In the logs I find the following:
INFO: Unable to check state of application "sx-5-7-eventbuffer": javax.management.RuntimeOperationsException: No deployment named [sx-5-7-eventbuffer]
mrt 15, 2015 10:48:01 AM oracle.wlevs.strex.core.OEPRuntime deploy
INFO: OEPRuntime.deploy: sx-5-7-eventbuffer, size=1732, time=214ms
mrt 15, 2015 10:48:01 AM oracle.wlevs.strex.core.AbstractManager updateOEPApplication
INFO: updateOEPApplication: 226ms
mrt 15, 2015 10:48:01 AM oracle.wlevs.strex.core.SXContext close
INFO: SourceService.createSource - 226ms
mrt 15, 2015 10:48:01 AM oracle.wlevs.strex.service.SourceService createSource
SEVERE: null
oracle.wlevs.strex.model.SXException: Unable to deploy OEP application
at oracle.wlevs.strex.core.OEPRuntime.deploy(OEPRuntime.java:128)
Any ideas on what went wrong here?

Hi Experts,
After i tried a few times, i can successfully start prepare with upgrade asistant monitor - Administrator >> Start Prepare,
Thanks

While Creation Of SaleOrder Char Values are not getting saved.(V C)

Hi SAP gurus,
One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
Awaiting for your valuable reply.
Cheers,
Kumar.S

Kumar ,
If you assign values in classification view or configuration profile they will become default for the product, and it willnot be changed in sales order.
another thing if the item category is incorrect you will not get the configuration pop up at all .
problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
see the result of configuration before saving the sales order , i hoep it will work for you.
I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
Check and revert back.
Regards
Ritesh

Output type not getting saved in the PO

Hello Team
we are facing one issue where output type is not getting saved in the PO.
we give one output type and than save it , after going back to the PO we see that it is not there.and no output issued
the PO is released properly and there is no issue , any idea what could be the reason for it

Hi,
Check in SU3 t.code, did check box selected u201CDelete After Outputu201D in Spool Control segment in Default TAB
Also check Partner Function VN maintained in Default values TAB in NACR--- > EF Application for your output type
Cross check partners {VN, PI, GS) are assigned to your PO output type in Partner Roles per Message Type
Regards,
Biju K

Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
Rosone

It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

XSD OTD compilefailure String literal not properly closed by double-quote

Java CAPS 5.1.3
I have created a XSD to describe a simple XML file. After this I created an OTD from the exported XSD file.
This OTD is being used in a JCD. During the build of the Deployment Profile I get the error: :Compile failed: xsd.XSD_MB235401907.X_all_B: Line 69: String literal is not properly closed by a double-quote
All steps have been preferformed within the same eDesigner and the same repository.
I have verified the XSD file with netbeans and can not see a problem with the file itself.
Any ideas to resolve this compile failure?
The XSD is:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:tns="http://ams1saa011:12000/repository/repository/Recieve/MessageBroker/WISE_WTE/repository1423024:117d46f486a:-8000/XSDDefinition1" targetNamespace="http://ams1saa011:12000/repository/repository/Recieve/MessageBroker/WISE_WTE/repository1423024:117d46f486a:-8000/XSDDefinition1">
    <xsd:element name="MessageBroker">
        <xsd:complexType>
            <xsd:sequence>
                <xsd:element name="IN" maxOccurs="unbounded">
                    <xsd:complexType>
                        <xsd:all>
                            <xsd:element name="MSGFN" type="xsd:string" default="IN"/>
                            <xsd:element name="DIR" type="xsd:string" default="\"/>
                            <xsd:element name="FILEMASK"
                                type="xsd:string" default="*.DAT"/>
                            <xsd:element name="MAPID" type="xsd:string" default="MS000"/>
                            <xsd:element name="RCVPRN" type="xsd:string"/>
                            <xsd:element name="RCVPRT" type="xsd:string"/>
                            <xsd:element name="RCVPFC" type="xsd:string"/>
                            <xsd:element name="SNDPRN" type="xsd:string"/>
                            <xsd:element name="SNDPRT" type="xsd:string"/>
                            <xsd:element name="MESTYP" type="xsd:string"/>
                            <xsd:element name="MESCOD" type="xsd:string"/>
                            <xsd:element name="MESFCT" type="xsd:string"/>
                            <xsd:element name="TEST" type="xsd:boolean" nillable="true"/>
                        </xsd:all>
                    </xsd:complexType>
                </xsd:element>
            </xsd:sequence>
            <xsd:attribute name="dateTime" type="xsd:dateTime"/>
        </xsd:complexType>
    </xsd:element>
</xsd:schema>The complete error stack trace is:
com.stc.codegen.framework.model.CodeGenException: error generating otd for CMap1_jcdMB_Recieve_SAP_Inbound1:Compile failed: xsd.XSD_MB235401907.X_all_B: Line 69: String literal is not properly closed by a double-quote
     at com.stc.codegen.OTDImpl.model.OTDCodeletFactory$OTDCodelet.postFileGeneration(OTDCodeletFactory.java:767)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.processCodelets(CodeGenFrameworkImpl.java:653)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1544)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
     at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
     at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
     at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
     at org.openide.util.Task.run(Task.java:136)
     at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
Caused by: java.lang.RuntimeException: Compile failed: xsd.XSD_MB235401907.X_all_B: Line 69: String literal is not properly closed by a double-quote
     at com.stc.javac.Javac.compile(Javac.java:227)
     at com.stc.otd.codegen.BaseXsdDtdGenerator.compileFromJarfile(BaseXsdDtdGenerator.java:254)
     at com.stc.otd.codegen.BaseXsdDtdGenerator.compile(BaseXsdDtdGenerator.java:52)
     at com.stc.otd.xsd.codegen.XsdParserGenerator.compile(XsdParserGenerator.java:182)
     at com.stc.otd.codegen.BaseXsdDtdGenerator.generate(BaseXsdDtdGenerator.java:166)
     at com.stc.otd.codegen.BaseXsdDtdGenerator.generate(BaseXsdDtdGenerator.java:90)
     at com.stc.codegen.OTDImpl.model.CollabOTDGenerator.generateCollabOTDJavaFiles(CollabOTDGenerator.java:233)
     at com.stc.codegen.OTDImpl.model.OTDCodeletFactory$OTDCodelet.processOTDJars(OTDCodeletFactory.java:861)
     at com.stc.codegen.OTDImpl.model.OTDCodeletFactory$OTDCodelet.postFileGeneration(OTDCodeletFactory.java:666)
     ... 10 more

You may need to escape the default slash "\\".
I'd suggest importing the xsd into the jcaps xml schema editor and verifying that way and then creating the otd by node export.
Regards,
Rupert

Document "could not be saved"

Hi everyone
Frequent frustrating problem: Often get the error message, "The document ** could not be saved". Usually it is a .mov exported out of FCP for Soundtrack.
Can anyone advise me what I am doing wrong?
Very many thanks
Roy

Unfortunately, not too many people seem to use it. It's been a great help here. But it did take some getting used to, that's for sure. But it speeds up mixing and fixing enormously. I actually save days at the end of a major project. It's well worth learning. The main difference is that it's track-based rather than clip based. I put everything that is sound/person/environment related on a single track, or isolated tracks. If I have one speaker/actor in a particular location, they go on their own track. I then apply effects and adjustments to the whole track at once. Keeping elements like that separated means you do large swipes of the project at once, not bit by bit. Then you feed the tracks downstream and combine them for level. And that part is additive. Add in new tracks and the overall level gets louder. That seem obvious, but when you look at the mixer you'll see that the original tracks are fine. It gets louder left to right.
Good luck.

"the document.....could not be saved"

I just started receiving this error message on one song. "the document.....could not be saved"
If I closed down everything and restarted i could then save the project. Now it won't even do that and it has spread to another song/project, with even more messages (Minor Problem in Data, Score Style Fixed, Error-Csong::CreateSeq-Illegal Block Size) the prject then opens up but there are no regions or tracks in the arrange window. These projects are very basic audio files (WAV) and few plug-ins, basic rock and roll songs.
These projects are being run at 96. I never received this info on projects at 44.1 or 48. All of your suggestions would be appreciated. Thanks, jdf

Whenever I had that error message (in Logic 32bit mode) it was a virtual memory issue. I seemed that memory was so tied that moment that it didn't have the necessary bits to perform the save process. When I tried to free up memory by closing all but one window or unload some plugins the save process went through.
Just make sure to write down the plugins that you unloaded so you can reload them when open up the project.
Quick Tip:
Always have the Activity Monitor open and keep an eye on the available memory space. If you do a lot of loading and unloading of sounds, Logic's memory and the available memory on your machine in general gets very fragmented because OSX keeps stuff in RAM just in case (Inactive Memory). Restart the machine once in a while to flush out all those leftovers.

The settings on the tab for "delegate" was not properly stored.

Hello group,
I try to write it in english - but it is a try only *g
Since last week I can´t set or delete any user or groups from the delegate tab.
Only User in the IT OU can set delegates. I´ve compare the users with acldiag and I can´t see any differnce.
I´ve try to move the users to the IT OU but the problem is the same.
New Users have the same problem. I´ve copy a User that can set delegates but the copied user can´t set it.
Die Einstellungen auf der Registerkarte für "Stellvertretungen" wurde nicht
korrekt gespeichert. Liste zum Senden im Auftrag kann/können nicht aktiviert werden.
Sie besitzen nicht die erforderliche Berechtigungen, um diesen Vorgang mit diesem Objekt auszuführen.
I´ve translate the error message with google language tools.
The settings on the tab for "delegate" was not
properly stored. List to send in the order can or can not activated will.
You do not have the required permissions to perform this operation with this object.
Our enviroment is a single W2k3R2 Domain with 2 Ex2k3 and 1 Ex2k7 Server.
Thx for any help!!
Kind Regards
Denis Ecklerhttp://www.ewig-drohendes-versagen.de
ICE 2009 I´ll be there -> http://www.ice-lingen.de/

Hi Denis,
At this time, I suggest you apply following hotfix on a problem Outlook 2007 client to check whether the error still exists:
Error message when you try to add a delegate in Outlook 2007: "The Delegates settings were not saved correctly"
http://support.microsoft.com/default.aspx?scid=kb;EN-US;950794
I would like to explain that the hotfix is included in Office 2007 Service Pack 2. Therefore, you can simple install SP2 on Outlook 2007 and create the registry key indicated in the KB article.
Please understand that before this hotfix was created, the "Send on Behalf" (PublicDelegates) permission was considered a mandatory part of adding a delegate. This hotfix lets you add the delegate without setting the "Send on Behalf" (PublicDelegates) property.
The "Send on Behalf" permission is not needed for meeting-related messages. Therefore, even without the "Send on Behalf" permission, delegates can successfully send meeting requests and responses on behalf of the calendar owner. However, when you use a delegate that does not have the "Send on Behalf" permission to send a non-meeting-related message on behalf of the owner, the operation fails.
After installing the hotfix and apply the registry key change, if the error can be resolved, we can conclude that the issue occurs due to Outlook is not able to update the PublicDelegates attribute successfully due to permission issue. After your previous post, I notice the issue occurs even if you create a new user.
At this time, would you please let me know whether the new user belongs to any group (except domain users)? I also suggest you use DSACLS tool to export the ACLs of the user object to check whether acl may reject the user to update AD attribute.
DSACLS “distinguished name of the user object” >acls.txt
Thanks,
Mike

Summing Track Stack not properly saving as a patch???

Similar Messages

Maybe you are looking for