SYSTEM_NO_TASK_STORAGE DDIC_ACTIVATION upgrade to EHP4 SPS5
Hello,
When want to upgrade our system from SAP ERP 6.0 EHP3 SPS5 ( Windows 32 Bit with RAM 3Gb ) to EHP4 SPS5 with SAINT we encountered the following Error in DDIC Activation phase :
The following details help you to analyze the problem:
- Error in phase: DDIC_ACTIVATION
- Reason for error: TP_STEP_FAILURE
- Return code: 0012
- Error message: OCS Package SAPK-60401INEAAPPL, tp step A, return
code 0012
In ST22 we have the following message :
Runtime Errors SYSTEM_NO_TASK_STORAGE
Date and Time 20.05.2011 19:51:09
Short text
Unable to fulfil request for 3897444 bytes of storage space.
We have adjut the following parameters but we still have the error :
tta/roll_extension = 2000000000
ztta/roll_area = 1000000
ztta/roll_first = 1
em/max_size_MB = 20000
em/initial_size_MB = 2048
abap/heap_area_dia = 2000000000
abap/heap_area_total = 5000000000
abap/heap_area_nondia = 2000000000
We have also applied /3GB in boot.ini for windows (recommendation Note 1275873 - Memory bottleneck during DDIC activation during EHP import ).
Thank you for you help.
The short-dump issue you are experiencing is a well known problem which uses to occur on 32-bit architecture system platforms;
those short-dumps are a clear indication of a 'lack of memory (address space) issue'.
When a program (or a transaction or a job) is running, the work process
follows this memory allocation sequence (valid for Windows platforms):
a) Roll memory up to the quota "ztta/roll_first"
b) Extended memory up to the quota "em/address_space_MB"
c) Roll memory up to the quota "ztta/roll_area"
d) Heap memory up to the quota "abap/heap_area_dia"
Short dumps like these ones arise when additional memory
is required to extend the internal table, but none is available.
Check these points :
- make sure parameters values are set as indicated in Note 88416
read the document "Optimizing the Memory Settings for
SAP Systems on 32-Bit Windows" that you will find at:
http://service.sap.com/~sapidb/011000358700006425762006E
Also,
- Enable the Windows startup option /3GB, as per Note 110172
- Reduce the memory parameters rdisp/ROLL_SHM and rdisp/PG_SHM to
6000 and check that other memory buffers like abap/buffersize have
not been increased from default values.
Note 110172 : Windows: Transactions with large memory requirements
- Niraj
Similar Messages
-
Excel layout changed after EHP5 upgrade from EHP4.
Hi All,
We have just finished the EHP5 upgrade from EHP4 for ECC 6.0 for our production system. BUT we noticed that The standard layout, (also known as Dynamic List Display) has been chagned in EHP5 compare to EHP4.
This is affected us as we have lot of macros enable for the excel files.
Request you all to help. Is there any sapnote, anyway we can resolved this issue.
ThanksHi Markus,
Thanks for reply.
I not sure how i can attached file over here? Is there anyway to attached files in the forum?. I have the before and after image of excel file.
But the position of the data which is downloaed in the excel sheet has been changed after upgrade. For example ,Before upgrade the column named "Description" in the production plan report was in the second column i.e. B where as after upgrade the "Description" column in the production plan report is in the first column i.e. A.
I mean the postion of the data changed in after upgrade. Therefore macro which are enable are not working anymore.
New Format Example
Production plan
Description Material Sales doc.
IRB 2600 M2004 3HAC020536-018 104861
IRB 2600 M2004 3HAC020536-018 2BT0615486
OLD Format
Production plan
Description Material Sales doc.
IRB 2600 M2004 3HAC020536-018 104861
IRB 2600 M2004 3HAC020536-018 2BT0615486
Hope this above will help to make it clear.
After checking this message ... the output example given above seems to be not showing the way i itend to... But in above example in the old format the Description column was at column B instead of column A after upgrade.
Thanks
Edited by: deepak.shinde on Oct 11, 2011 8:34 AM
Edited by: deepak.shinde on Oct 11, 2011 8:36 AM -
Hi
We have just implemented ERP (ECC) EHP4 SPS5 with NW7.01 SP5. Unfortunately (for us) we have found some functionality that is delivered in NW7.01 SP6 . Our next major maintenance period is next year.
I would like to just apply the NW7.01 SP6 without implementing EHP4 SPS6 for ERP.
I understand that this would not be consistent with the SP Stack concept but has anyone done something similar or found a note with more information about the interdependencies of NW7.01 and EHP for ERP?
Thanks in advance.
DougSAP have confirmed that this is OK if all Basis Components SP6 are applied.
-
46C- ECC6 upgrade with EHP4 SAP_BASIS package not found
We are executing an upgrade from 46C to ECC6 SR3 and binding in EHP4.
We have successfully downloaded EHP4 using Solution Manager MOPZ and
provided the generated "XML" file during the PREPARE.
During the phase EHP_INCLUSION, PREPARE is stopping with a message "No
matching SAINT package for 'SAP_BASIS' found".
The KB70102.SAR and KB70103.SAR packages from EHP4 have definitely been unpacked
and are available in /usr/sap/trans/EPS/in and we have prompted PREPARE to search EPS/in but it just returns to the previous error after searching.
It appears from the logs that the upgrade is expecting a "SAINT"
install package for SAP_BASIS and does not consider the KB70102/3
patches as acceptable?
Any clues as to why PREPARE is not accepting the SAP_BASIS packages and looking for a SAINT install?
Below is an excerpt from the EHP_INCLUSION.LOG
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 Looking for SAINT package for 'SAP_BASIS' ...
4 ETQ399 ... Read uploaded packages calling function module:
4 ETQ399 current: name = 'SAP_BASIS', release = '700'
4 ETQ399 patch type = 'U', ncvers-component = 'SAP_BASIS'
4 ETQ399 R3upReadNewPackages:
4 ETQ399 patchType='U', langVect='DEFS'
4 ETQ359 RFC Login to: System="CB1", Nr="00", GwHost="dbusrcb1", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399 ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399 ... No matching package found.
Regards,
Mike TarrOk, I was able to download the K-701DHINSAPBASIS package from Service Marketplace and this resolved the SAP_BASIS problem. Thank you Markus for this solution.
I also downloaded the SAP_ABA, SAP_BW, and the PI_BASIS components and unpacked those as well in /usr/sap/trans/EPS/in. My upgrade is now stuck asking for a SAINT package for SAP_ABA! I'm sure the SAP_ABA install, K-701DHINSAPABA, is unpacked and available in /usr/sap/trans/EPS/in.
The SAP_ABA files are definitely readable and there are entries in table PAT03_SDA for them.
I have a ticket open with SAP support but they have not had a solution yet for the SAP_ABA
Solution Manager failed to identify any of these packages as required in MOPZ.
I'm starting to wonder if anybody has ever done a 4.6C to ECC6 upgrade with EHP4 bound before?
Any ideas on the SAP_ABA would be appreciated. Here's a section of the EHP_INCLUSION.LOG file from PREPARE.
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399 Found: name = 'SAP_BASIS', release = '701', package = 'SAPK-701DHINSAPBASIS'
4 ETQ399 ... Matching package found: 'SAP_BASIS','701','SAPK-701DHINSAPBASIS'
4 ETQ399 (trc) R3upPatchDisassembleQueue: 1 package queue entries
4 ETQ399 (trc) R3upPatchDisassembleQueue: force=NO
4 ETQ399 (trc) R3upPatchDisassembleQueue: 0 packages will be disassembled
4 ETQ399 ... ... INST/UPG SAINT decision ok
4 ETQ399 ... EhP component SAP_ABA, 701
4 ETQ399 Looking for SAINT package for 'SAP_ABA' ...
4 ETQ399 ... Read uploaded packages calling function module:
4 ETQ399 current: name = 'SAP_ABA', release = '700'
4 ETQ399 patch type = 'U', ncvers-component = 'SAP_ABA'
4 ETQ399 R3upReadNewPackages:
4 ETQ399 patchType='U', langVect='DEFS'
4 ETQ359 RFC Login to: System="CB1", Nr="00", GwHost="dbusrcb1", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399 ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399 ... No matching package found.
4 ETQ010 Date & Time: 20090511150018 -
Upgrade to EhP4/NW 7.01 in ECC
We are on ECC 6 and BI 700.The Basis team is planning for an upgrade to EhP4/NW 7.01 in ECC . Does that mean the bi 7 is upgraded with EHP1? Can some one please clear this. What does NW 7.01 in ECC mean?
Thanks,Hi,
ABA Support Package 20 for 7.00
Basis Support Package 20 for 7.00
BW Support Package 22 for 7.00
It appears that the BI system is separate as the component levels here do appear to be
from BI system rather than having ECC components also.
Your SP stack level looks to be SPS20 which is quite old and should be updated before
updating system to EHP1.
Please refer to the following documentation:
1142832 - Installation Enhancement Package 1 for Netweaver 700
1146578 - Central Note: Upgrade to Systems on SAP NetWeaver 7.0 EHP1
1276895 - Add. info. about Upgrading to SAP Solution Manager 7.0 EHP1
1248905 - SP Equivalence for update/upgrade to EHP 1 for SAP NW 7.0
Also you can refer to the Ehancement Package Upgrade Guide at
service.sap.com/instguides
-> Installation & Upgrade Guides
-> SAP NetWeaver
-> SAP NetWeaver 7.0 (2004s)
-> Upgrade
Regards,
Aidan -
ECC/ERP Upgrading to EHP4 - basic steps?
Just installed fresh ERP/ECC 6 from disks labeled EHP4 ready. Needing to upgrade immediately to EHP4. To do this, my understanding is that I need to initiate a maintenance transaction from solution manager to start the process and then proceed (basically following these directions http://sap.wsteinert.com/blog/2009/10/implementing-the-ehp-4-part-2/ ).
Can anyone describe (in detail) the maintenance transaction process and what I have to configure on the solution manager side to get this up & going?
Also, does the EHP4 process require that I download the components? It looks like I already have some media that may have EHP4 components on it. Can I just do a local upgrade using the media?> Can anyone describe (in detail) the maintenance transaction process and what I have to configure on the solution manager side to get this up & going?
You have to Create a maintenance transaction in the SAP Solution Manager and select the
appropriate technical usages in order to calculate the corresponding software
packages.
Refer https://websmp204.sap-ag.de/~sapidb/011000358700000293582009E.PDF
> Also, does the EHP4 process require that I download the components? It looks like I already have some media that may have EHP4 components on it. Can I just do a local upgrade using the media?
refer https://websmp104.sap-ag.de/~sapidb/011000358700000931872009E .
regards,
Nibu Antony -
ECC6.0 - upgrade from EHP4 to EHP6 - cross release transports.
Hi Experts
We are planning to upgrade our system from ECC6.0 -EHP4 to EHP6.
Source - ECC6.0-EHP4
Target - ECC6.0-EHP6(Enhancement pack6)
Current ECC version -
SAP_BASIS 701 0014 SAPKB70114 SAP Basis Component
SAP_APPL 604 0013 SAPKH60413 Logistics and Accounting
We would like to know during the project if we can do a transport
between upgraded development ECC6.0 -EHP6 to non upgrade production ECC6.0-EHP4.
We have data from note 1090842 and 1273566.
But last 10 lines of note 1090842 are contradictory wherein on one side it says you can do transports between Releases 7.0*, 7.3* and 7.4* and
on other it says it can be problem if support pack levels are different on same release.(if problem can happen on same release with different pack
level then there are greater chances of issues between different releases).Note 1273566 is clear and suggest no issues exist yet for
technical and logical transports between suggested version 700/701 to >=702
Also below is the extract from SUM guide - (SUM-1.0-SP07)
RECOMMENDATION
We strongly recommend that you perform transports only between systems of the same release or enhancement package level, and where the same business functions are activated. If you do not follow this recommendation, you do so at your own risk regarding potential problems.
Please suggest if we need to create Dual maintainance parallel landscape during the tenure of project where two development system co-exist.One
with current and one with upgraded version and changes need to be done on both in parallel.Support fixes and LTO’s go from non upgraded dev to non upgraded prod.
ThanksHello
I won't perform cross version transport even if it can be possible.
As of 7.02 cross version transport are prevented by default with option SP_TRANS_SYNC (see here under note).
The best way is, if possible, to have a manual dual maintenance. All corrections created in the Ehp4 dev should be manually recreated in the Ehp6 dev.
What is usually done is to upgrade at first a copy of production for test/discovery purpose, the aim is to identify most of the regressions/evolutions. This will reduce the time you will have to spend in the migrated dev to adjust your system. You then migrate dev and enter in a freeze period where you reduce activity on legacy Ehp4 system to the minimum (bug correction for prod).
One good thing with the manual reprocessing of changes on the Ehp6 system is that this kind of constraint will help consultants to reduce their activity.
Regards
1742547 - Information about component version check in TMS -
CRM 5.0 Compatibility with backend upgraded to EHP4 FOR SAP ERP 6.0 / NW7.0
Hello,
What are the compatibility issues for EHP4 FOR SAP ERP 6.0 Upgrade with CRM 5.0 ? Are there any OSS notes to address upgrade specific issues?
Following are the System Details:
Upgraded EHP4 FOR SAP ERP 6.0 / NW7.01
Component: SAP_APPL
Release: 604
Support Pack: SAPKH60402
Level: 0002
Existing CRM 5.0
Component: BBPCRM
Release: 500
Support Pack: SAPKU50006
Level: 0006
Thanks,
AG
Edited by: Arijeet Ganguly on Sep 15, 2009 11:49 PMHi Amirsd,
You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
It would run in 7 phases including downtime phase.
Let me know if you have any queries. !!!!
Regards,
Shobhit Garg -
MaxDB 7.8 error upgrading from EHP4 to EHP5
I'm upgrading ECC600 from EHP4 to EHP5 (ramp-up release) in a Maxdb 7.8 and Linux Suse 11 environment.
The source release have an 7.01 kernel.
With sapehpi, in the phase PREP_INTEGRATION/TABSPC_PREP, I have an error in GDBSSHD.LOG file:
TPERR- error in dbdd_get_size: 2
TPERR- msg: POS(60) Unknown column name:OWNER
Accordingly with notes 1142632 and 1447663, I installed the new 7.01 kernel (version 117) without changes.
I copied also the new dbsdbslib.so file in the installation directory, but there are no changes.
Any suggestion?
ThanksUnfortunatelly, after the correction, I try to restart the SAPehpi and in the PREP_INTEGRATION/TABSPC_PREP phase I had another similar error; in the TABSPCP.LOG file there are this message:
4EETQ399 Execution of 'tp getdbobjsize' failed, rc=1
In the file TP.ECO the error is:
TRACE-INFO: 1: [dev trc ,00000] Thu Apr 14 09:59:00 2011 1789 0.001789
TRACE-INFO: 2: [dlux.c ,00000] *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/sapdb/DVDEHP5/EHPI/abap/exe/dbsdbslib.so") FAILED
TRACE-INFO: 3: "/sapdb/DVDEHP5/EHPI/abap/exe/dbsdbslib.so: cannot open shared object file: No such file or directory"
TRACE-INFO: 4: 34 0.001823
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0249
tp finished with return code: 249
meaning:
connect failed due to DbSL load lib failure
I try the R3trans -d command but in the trans.log file there is the message:
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/IBS/SYS/exe/run/dbsdbslib.so' ... 118 0.000702
4 ETW000 [dlux.c ,00000] *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/IBS/SYS/exe/run/dbsdbslib.so") FAILED
4 ETW000 "/usr/sap/IBS/SYS/exe/run/dbsdbslib.so: cannot open shared object file: No such file or directory"
4 ETW000 272 0.000974
4 ETW000 [dbcon.c ,00000] *** ERROR => Couldn't load library '/usr/sap/IBS/SYS/exe/run/dbsdbslib.so'
of course the file exists and I copied the same that are in exe and exenew directory.
Any suggestions? -
Upgrade to EHP4: OCS package SAPKE60002 does not match the current software
Hi!
I would like upgrade my SAP ERP 6.0 system to EhP4.
During the phase PRE_EXTENSION/EHP_INCLUSION I get the following error:
ERROR: Unable to generate package queue.
Return Code = 3, Reason = "OCS package SAPKE60002 does not match the current software component vector"
Check log file 'SPDA_EHP_INCLUSION.LOG' for details.
I looked into the defined stack queue by the EHP Installer tool and detected that this SAP HR component should have the version 38. Currenty the SAP HR has the version 01.
Can some one help to solve this problem?
Thank you very much
regards
Jürgenhii
Note 822379 might help you
have a look
Rohit -
Eror upgrading from EHP4 to EHP5 , Database : MAxDB 7.8.0.14
Hello
I have updated Max db from 7.6 to 7.8 recenlty required to Upgrade ECC6.0 EHP5
Current ECC 6.0 EHP4 , NW 7.00 EHP1
Below is the i am getting while upgrading EHP5 through SAPEHpi
TOOLOUT.LOG-->
SAPehpi> Starting subprocess tp.exe with id 5580 at 20110503154658
EXECUTING tp.exe pf=J:\EHP5_INST\EHPI\abap\bin\DEFAULT.TPP getdbinfo WT9
Environment: JAVA_HOME=C:\j2sdk1.4.2_11
Environment: PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_11\bin;E:\usr\sap\WT9\SYS\exe\uc\NTAMD64;E:\sdb\programs\bin;E:\sdb\programs\pgm;E:\usr\sap\WT9\SYS\exe\uc\NTAMD64
Environment: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
Environment: auth_shadow_upgrade=0
Environment: dbms_type=SDB
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
HALT 20110503154658
ERROR: *Cannot determine database version, database type is not defined in profile. [tpconnect.c,1158]*ERROR: EXIT(16) -> process ID is: 3176
Process with ID 3176 terminated with status 204
Please help
Regads
Jain Pankaj> EXECUTING tp.exe pf=J:\EHP5_INST\EHPI\abap\bin\DEFAULT.TPP getdbinfo WT9
> Environment: JAVA_HOME=C:\j2sdk1.4.2_11
You Java version is 32bit and is ancient where you platform seems to be 64bit. I highly suggest using a recent JDK.
> Environment: dbms_type=SDB
I guess this is the problem, dbms_type must be "ADA".
Markus -
ECC 6.0 upgrade to EHP4 via EHPI - Problem
I'm upgrading an ECC 6 system to EHP 4.
In the extraction process I get the a strange error message:
Error: unknown hostname "<hostname>"
The message server of your SAP system is not running,
or the hostnames known by the message server are wrong.
I've checked. The message server is running and the hostname is known in my host file and in the server's hostfile.
Any idea's to what this is causing?Hi,
Please help on this. I am getting the same error.
ERROR: unknown hostname "<hostname>"
The message server of your SAP system is not running,
or the hostnames known by the message server are wrong.
We have HA installation on Solaris.
Regards
Dhiraj -
Upgrade SAP from ECC 6.0 EHP4 to ECC 6.0 EHP7
Dear all,
We are using ECC 6 ERP 4 SP5 with oracle 10.2g and Netweaver 7.0 EHP1.
Other system release
CRM 7.0 SP5 & CRM JAVA Release – NW 701 SP3
BI Release – NW 701 SP5 BI CONT 7.04 & BI JAVA Release – NW 701 SP3
We are planning to upgrade ECC 6 ERP4 SP5 to ERP 6 ERP7 SP1, Could you please suggest for compatibility version for CRM & BI with ECC6 EHP7
And any document for EHP7 up gradation procedure and what is the impact or change made in system after upgrade from EHP4 to EHP7
Regards,
AjayHello
The nightmare is going on... this point has been discussed a year ago (Re: Comapatability between EHP7 and SAP Netweaver BI 7.0 EHP1) and the conclusion was that you only need to upgrade HUB satellite systems... and a BW system is not an HUB.
The only possible issue would be if the java stack of the BW system is used directly by the ECC system.
Did not find any information on the necessity to upgrade the CRM, so I think you should keep it as it is.
This are even getting worst because sometime sap support (OSS) are not able to provide clear answers (Interoperability btw ERP 6.0 EhP7 and SAP NW/BW 7.0)
Best regards
Strategy beyond SAP Business Suite 7 Innovations 2011 - Landscape Governance - SCN Wiki
1388258 - Version Interoperability within the SAP Business Suite
In order to use the new JAVA EE 5 capabilities and benefit from the improvements of SAP NW 7.3 the version interoperability range has been moved upwards for SAP Business Suite core applications with Release to Customer (RTC) from 2013 onwards.
This means that SAP NetWeaver Systems 7.30 or higher are required if SAP Business Suite applications are based on or operating with those central Systems (Enterprise Portal, Business Warehouse, Process Integration).
Customers wishing to utilize SAP Business Suite applications with RTC from 2013 onwards, that require one of these central SAP NetWeaver Systems, will have to upgrade their central NetWeaver Systems to 7.30 or higher before upgrading e.g. to SAP Enhancement Package 7 for SAP ERP 6.0. -
Upgrading R / 3 4.7 system to ECC6.0 with EHP4 along with windows 2008
Hi All,
I am looking for your feedback about the plan for upgrading our Landscape to ECC 6. with EHP4 from R/34.7E.
Current Environment: R/3 4.7X110 with SQL 2000 in 32 bit windows 2003
Planning to upgrade to the level of : ECC6.0 with EHP4 64 bit windows 2008, SQL 2005 Database
Based on the previous experience in upgrade I have planned in the following ways.
Since my basis component is in the level of 63, its possible for me to restore the SQL 2000 database in SQL 2005 (Using System copy tool )
Step 1: Migration of OS / DB using system copy tool (R/3 4.7 with SQL 2005 in 64 bit Windows 2003 ), Then will leave the system for testing for some period and after the confirmation, planned to start the upgrade
Step 2: By meeting all the prerequisites, Planned to upgrade to ECC6.0 with EHP4 on the OS / DB upgraded system.
Step 3: Once the upgrade completed / With the confirmation from the functional and technical consultants, I planned to upgrade the windows 2003 to windows 2008 using system copy tool.
Note: I am not using SQL 2008 - Project decision.
The above mentioned plan is the only way(proper way) for doing such activities or is there any other way to shorten the project.
I should not ask the below question (Even after reading PAM and SAP note 1054740), But kindly regret me for asking this one, out of own curiosity, i am asking the below one.
1. Is there any possible to install SAP R / 3 4.7 in windows 2008 with 2005 (This will help me to shorten the project). I am completely aware that SAP wont support R/3 4.7 with windows 2008, if its not at all possible is there any other work around for me to shorten? Let me know your suggestions and thoughts
Your valuable inputs will help me to proceed further with the plans (I surfed the SDN and read master guides already) . I really want to make sure , the way which i am going is the right one.
Thanks and Regards
Vijay KumarHi Jitendra,
Hope you should check the PAM again , Its supported for sure and also for upgrading to EHP4 - SQL 2005 is the Prerequiste.
Hi Abhi and Others,
Thanks for all your support.
I have successfully completed the project for my landscape and it was a great success too.
As you all said, since I had the hardware availability and time frame as well. Hence, I have tried both the possibilities.
Note :I would prefer and stick with the SAP proposed and supported way and even for my project I have followed the same. So I would recommend to stick with SAP supported one.
But for the own technical interest I have tried the other option as well which is not supported by SAP and also faced some typical issues as well / but solved on my own with some tricks and other activities. So, this option is also possible but highly risked one and of course(more importantly) which is not supported by SAP. So, i would recommend to go with the SAP recommended way.
Thanks for everyone and I am closing the thread
Regards
Vijay -
EHP4 upgrade: Error in Phase ACT_UPG
Hi All,
While upgrading to EHP4 on ECC 6 system, we got error in phase MAIN_SHDRUN/ACT_UPG
Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
Last error code set: Unresolved requests in buffer RH4 Check logfiles 'ACTUPG.ELG' and '/sapdump/SAPehpi/EHPI/abap/log/SAPehpi.ECO'
ACT_UPG log:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DMINISPSCA.RH4
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "12"
Log of SAPA-604DMINISPSCA.RH4
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP101 transport order : "SAPK-604DMINISPSCA"
1 ETP102 system : "RH4"
1 ETP108 tp path : "/sapdump/SAPehpi/EHPI/abap/exe/tp"
1 ETP109 version and release : "372.04.70" "700"
1 ETP198
3 EPU324 See log for request "/sapdump/SAPehpi/EHPI/abap/tmp/SAPAB70015.RH4" (timestamp "01:26:08", system "RH4")
1AETR012XProgram terminated (job: "RDDMASGL", no.: "01260600")
1AEPU320 See job log"RDDMASGL""01260600""RH4"
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP110 end date and time : "20091012033215"
1 ETP111 exit code : "12"
1 ETP111 exit code : "12"
Job RDDMASG log :
Job cancelled with following log
2.10.2009 01:26:07 Job started 00 516 S
2.10.2009 01:26:07 Step 001 started (program RDDMASGL, variant IMPACTMRG, user ID DDIC) 00 550 S
2.10.2009 01:26:08 Start of mass activation 01:26:08 AD 010 S
when tried to log into shadow instance after getting error, it is giving error
RH4: system message
work process restarted; session terminated;
we restarted shadow system. There is no dumps in the shadow system.
Work process getting killed after 7800s
checked in work directory of Shadow system: devdisp log :_*
Mon Oct 12 04:49:46 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1694]
***LOG Q0K=> DpMsAttach, mscon ( HW136799) [dpxxdisp.c 12639]
DpStartStopMsg: send start message (myname is >HW136799_RH4_22 <)
DpStartStopMsg: start msg sent
Warning: Swap space is configured quite small with 20477 MB.
It should be configured with at least 20 GB on 64 bit systems.
See note 153641 for more information.
Warning: tmpfs at /dev/shm is configured quite small with 1972 MB!
Minimum value is 8192 MB.
Recommended size is 75 % of RAM + swap.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Oct 12 04:49:47 2009
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 221
Release check o.K.
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Oct 12 06:57:01 2009
ERROR => DpWPCheck: W8 (pid 9769) died (severity=0, status=7) [dpxxdisp.c 15776]
child (pid=9769) killed with signal 7
Mon Oct 12 06:57:43 2009
ERROR => DpWPCheck: W7 (pid 9768) died (severity=0, status=7) [dpxxdisp.c 15776]
child (pid=9768) killed with signal 7
Please let us know what needs to be cheked for the problem
Thanks,
Ramesh RamagowniHi Markas and All,
Thanks for the information. /dev/shm was 100% full. now, the issue is solved after deleting its contents. and we have finished with EHP4 upgrade.
After upgrade, SAP_AP component still showing as 700
SAP_AP - 700 - 0015 - SAPKNA7015 -SAP Application Platform
Can we delete old tablespace PSAPSR3700, it is showing as 0% used in brspace at present.
Also while trying to move some datafiles using brtools after upgrade we are getting following error,
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.52
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0252E Function fopen() failed for '/oracle/RH4/sapbackup/.user.pas' at location BrToolCall-2
BR0253E errno 13: Permission denied
BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
There is no file in the directory '/oracle/RH4/sapbackup/.user.pas'
Please suggest what needs to be for this issue..Do we need to upgrade BRTOOLS..
Thanks,
Ramesh R
Maybe you are looking for
-
Java 1.4.2 swing (setBounds) performance problem
Hi, We were having performance problems with swing ever since we moved to java 1.4.2 and we finally switched back to 1.4.1. However, we have now traced the problem to JVM and the following simple code demonstrates it. I would like to hear from others
-
Not scaling images in drop zone
Hi, For some reason when I drop an image into a drop zone in iDVD 6, it will not scale the image so a large chunk of the image is cropped off. Since the image I need to use has some text on it, I'm trying t resize it to fit in an external editor, but
-
Import from catalog: what happens to this catalog ?
Hello everyone! I follow Scott Kelbys LR3 book for transferring my work from my studio laptop to my main processing computer in my office using the EXPORT TO CATALOG technique. So then I transfer the folder to where I keep my LR pictures in MY COMPU
-
0X4001100200001012 error with windows recovery disk
For quite some time (over a year), I've been seeing chat about this error when attempting to make recovery disks on Dell machines. Basically, a recovery disk made in windows 7 starts to boot, when tested, but then gets to what looks like the blue bac
-
Dear All, Hw Can I Substitute profit center to business area and business area to profit center at header level for customer as well as vendor. Business area feils is mandatory at header level for both customer and vendor. Only on e business palce &