System not calculating depreciation for assets

The system is not calculating any depreciation or even showing planned depreciation values under asset explorer.
Problem is in QAS client checked configuration and all settings are fine and in test client all is fine system is calculating depreciation. Please help thank you

Hi, check in AW01N in Posted values tab when last depr was posted and when next planed.
May be acquisition was in the next period from period in which you're trying to post depr. Or may be the case in Period control method, I mean that depr'd be calculated quarterly

Similar Messages

System Not Calculating Taxes for Slab-Men.

Hi,
Before Applying the note i created entry for men in T7INT1, although system created a work bench request but the entry for MEN was not reflecting in T7INT1, i am not able to locate it, now the Note is applied & the entries are present.but i want to delete the manually created entry.
SL23 Income tax rates for men 01.04.2011 31.12.9999
I believe system is not able to read the slab properly as there are 2 slabs with same charectristics.i want to delete the manully created entry, where can i locate it as it is not present in T7INT1.

Hi
Please update the SAP HR Patch level instead of changeing manually.
This will reflecting in T7INT1.
Thanks & Regards
Vikram

Reverse depreciation for asset wise

Dear SAP gurus,
Is it possiablity to do reverse depreciation for assets wise.Please suggest me.
Thanks in advance,
Sai

Hi,
In standard it is not possible.
You have workaround for this.
1.Change the depreciation key assigned in asset master
2.Copy transaction type 640 and choose debit transaction radio button. Next go to ABAA and give the new transaction type and amount(depreciation amount) to reverse.
You can choose any one option from the above.
Regards,
Sankar

AR29N Depreciation not completely posted for asset

Hi,
I am trying to do an asset revaluation using transaction AR29N
However, the following message appears when the transaction is executed
Diagnosis
Depreciation still has to be posted for asset.....
System Response
The asset cannot be processed
Procedure
Execute a depreciation posting run for the period 001/2011
I have already executed a depreciation run using transaction code AFAB for the period 001/2011. When I go to Asset Explorer AW01N under the posted values tab I am seeing depreciation posted for the period 01 for the year 2011.
Therefore, I do not understand why the system will still issue a message execute a depreciation posting run.
Any assistance will be greatly appreciated.
Regards,
Niketa

Hi Bernhard,
Thanks for replying.
I checked both the SAP notes you recommended and other SAP notes that relate to asset revaluation and still was not able to find any one that matched my problem.
Is there anything else you will be able to suggest ?
Regards,
Niketa

Asset Scrapping - Calculating Depreciation for entire year

Hi guys
We want to scrap an asset without revenue using ABAVN.
Asset Details:
The asset will be completely depreciated by the end of this year (December)
We have smoothing indicator on.
We wish to post the retirement and close out the asset balances in this month itself.
(No depreciation should be pending for the remaining periods of the year)
When we post the retirement transaction in test environment, it still shows the planned depreciation for the entire year.
How do we avoid the planned depreciation posting for future periods ?
Thanks!
Gautam

Perhaps, the following might be a solution that can be implemented safely in a production setup:
Objective: To post retirement related depreciation in a single period without smoothing over the remaining periods.
Solution:
Perform standard depreciation posting run for current period
Turn Smoothing Indicator Off
Write Off Asset
Run Repeat Depreciation Posting Run (select Repeat Posting Run instead of planned and also input the retired asset number)
Turn Smoothing Indicator back on
This should post the complete depreciation in the current period for the retired asset and smooth out the depreciation for all remaining assets

Running depreciation for assets uploaded by ADI

Hi All,
I uploaded some assets into applications using ADI (Application Desktop Integrator). I did not enter any YTD or Accumulated Depreciation values while doing that with the hope that the applications will calculate it when I first run the depreciation for the current open period.
For some of the assets, Date in Service field has a date from 2-3 years ago. Does anybody know if applications calculate depreciation for those old assets when running it for say January 2007 or I have to manually calculate and enter it into the system.
Thanks,

Hi Bernhard
The understanding of getting -1100 as NBV is correct
But when we check the AR001/AR002 as an enhancement spot, our requirement cannot be done
We tried the other option of taking an customer exit during AFAB and tried to append the value of depreciation. At that point we cannot append the current period depreication from postive to negative
From our analysis we found that it may not be the right place, since we have the value of depreciation in postive in AA table (which can be checked in AW01N)
The other option of this is while posting transaction for example F-90, the system will post FI transaction and it will update the AA tables as well
But AA updation happens at backgroud. Do you have any idea or hint which program will update the AA when F-90 is done
If you check the value in AW01N, this will be calculated the planned depreciation movement the F-90 transaction is posted
Thanks
Bala

Freeze the partial depreciation for asset

Dear Expert,
We have special scenario for asset depreciation. In China, the assetu2019s retirement need waiting for government inspection & approval. The requester to do the physical scrap when we got the approval, and then the asset accountant will retire this asset in SAP system.
In the period of waiting of approval, the asset needs to stop the depreciation. We can shutdown or change depky 0000 for depreciation freeze, but these methods will freeze all NBV which mean the entire asset has not depreciation, but we think freeze the partial NBV and the remainder NBV still has depreciation in future.
For example,
Asset A - 01/31/2009 GAV $100 AD $50 NBV $50
This asset needs the partial scrap for $20 on 02/01/2009.
Asset A - 02/01/2009 GAV $100 AD $50 NBV $30 * 20$ will be froze.
Just need to your help, What method can carry out this result in SAP?
Thanks.

Hi,
You can use the cutoff value key and assign it in the depreciation key and in turn assign it in asset master,in your case the cutofff key would be defined as 20%. (if you want you can create a new dep key and assign it to the specific asset)
doing this will make sure that after NBV of the asset is $20, depreciation will not be carried out.
hope this clarifies youe query.
Regards,
J

System not calculating as mentioned in the price differentials multipliers

Dear Folks,
We are using contingent worker functionality in R12.1.3.
1) For example,we have a PO with line type as rated based temporary labour, UOM as "HR" , unit price as 100 and total amount is 100000.
2) Mentioned multipliers in PO for price differentials as Holiday as 2 and Overtime as 1.5.
3) In general working hours in a day is 8 hrs.The calendar defined in the system with Mon-Fri as working days.
4) Timecard entered in OTL with Sunday as '8' hrs, Monday as '10' hrs.
5) Whereas system need to calculate as for Sunday 8hrs=>8*100*2=1600 and for Monday =>10hrs=(8*100)+2*100*1.5=1100 in total need to show as 2700.
6) And those time card details interfaced from OTL to purchasing and it shows as received with an amount of 1800 as received in the PO shipments under more tab.
System does not calculated as per mentioned price differential multipliers.
Am i missing any setup?
Any help will be highly appreciated
Regards,
Sri.

Please someone help...I am stuck on this at some place or the other and now finally at this place when I thought that everything is well:(

How can i calcilate cost depreciation for assets

Hi.
can anybody tell me how can i calculate
cost depreciation for an asset.
i have used one function module DEPR_RECALCULATE.
but it will allow only one date and it will calculate depreciation for total year .
i want to pass the two date .
how can i calculate depreciation between two periods.

Hi,
Check this FM: AM_ASSET_DEPR_CALCULATE
Regards
Kannaiah

Not posted depreciation for an fixed asset

Dear SAP Guru's,
I have the following situation at my company:
I have an asset where the first APC value was posted in year 2000. The useful life for this asset was 3 years.
That means in 2003, the asset was fully depreciated.
The problem is that in 2004 it was made again an APC posting on this asset, but nobody has seen that the useful life still ended. Therefore this amount was never planned for depreciation and as consequence it was never depreciated.
Now the problem is that the financial department wanted to retire this asset but they received the error message that they can not retire the asset because there is still value on the asset.
Which options do I have in this case to be able to plan and post the whole remaining depreciation in this month (31.11.2010) in order to do after wards the retirement?
Thanks,
Best regards,
Melitta

Hi Melitta
1. Do an un-planned dep posting or
2. Better and simpler option would be do ABSO using Transaction type 101... You can enter a P&L account of your choice (Which will be Debited) and asset will be receiving the off set posting
Regards
Ajay M

Shift Depreciation for assets

Hi All
I want to charge depreciation as follows:
Depreciation Rate: 4.75% for 180 days, 7.42% for 90 days and 10.34% for remaining 95days.
I have created 3 different depreciation key for above three rates. But its not working
For this shift factor will be used. Let me know how to do it in SAP.

Hi,
The following steps are needed to maintain multiple shift depreciation:
1.The variable depreciation portion as a percentage rate is to be maintained in the detail screen of the depreciation area. Variable proportion is calculated out of the system as follows:
(Difference between two dep rates as per shift wise X100)/ lower dep rate. eg. (7.42-4.75)*100/4.75 = 56.21
For each shift you can define period intervals.
In time dependent tab, for Single Shift
shift factor - 1
variable portion = 56.21052632
for double shift
shift factor - 2
variable portion - 56.21052632
for thiple shift
shift factor - 3
variable portion - 58.84.
2. The multiple shift factor is to be maintained in the time dependent data in the asset master record. This shift factor is multiplied by the variable portion of ordinary depreciation.
Once you have done the above the SAP system calculates the total depreciation amount as follows:
Depreciation amount = Fixed depreciation + (variable depreciation * shift factor)
Regards
Prachi

Mid year golive, regular schema is not calculating anualgross for 12 month

HI
its mid year golive payroll , we uploaded april- sept old result. then run inlk schema.
after that when i run regular payroll system is not taking previous 6 moth salary for annual gross. semilarly system is not considering last 6 month for exemption also
i have uploded /130 tech wagetype also for old result but still its not working.
its calculating everything from oct - march .
please help

Hello Suprita,
I hope your query is on India payroll, if it is so then kindly raise your query in ERP HCM forum, this forum is specific to Payroll North America.
With Regards,
S.Karthik

System not coming up for PSS in AC 10.0

I started configuring AC 10.0 and added connectors using SPRO but when i go to nwbc to reset my password it is not bringing up any systems list.
Should i be checking something to bring in the list of systems.
Thanks
Uday

Hi Uday & Jagat,
As lmassena correctly mentioned Go to:
SPRO -> Governance, Risk and Compliance -> Access Control -> Maintain Connector Settings
Then scroll right and you will see a check box with label "PSS"
For other configuration details Please check SAP Note 1617371 and 1578837 for the detail Configuring Password Self-Service in GRCAC10 and Password Self-Service Email.
Thanks,
Guru

Loading date Not calculating Properly for Standard Order.

Hi Gurus,
I am facing issues in "OR" order type sales order where Loading date is not getting calculated correctly.
On discussion with the client it was clear that they tried to schedule the Order manually for couple of times.
But as much I believe Loading date should automatically be determined in SAP based on scheduling date.
can any one tell me if there is any OSS note available for this or do we have any alternate solution for this case.
Early reply Appreciated...
Thanks in Advance!!!!!!
Best Regards,

Hi All,
Any one who has faced this type of issue.

AED not calculated properly for imported capital Goods

Dear All,
I am facing one error while capturing Excise Invoice for Imported capital goods .While performing this AED set off reflecting is 100% which is supposed to be 50%.For raw material its calculation is correct .Any solutions.
Thanks.

Hi
check following link
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f?QuickLink=index&overridelayout=true]
Regards
kailas ugale

System not calculating depreciation for assets

Similar Messages

Maybe you are looking for