System Not Calculating Taxes for Slab-Men.

Hi,
Before Applying the note i created entry for men in T7INT1, although system created a work bench request but the entry for MEN was not reflecting in T7INT1, i am not able to locate it, now the Note is applied & the entries are present.but i want to delete the manually created entry.
SL23 Income tax rates for men 01.04.2011 31.12.9999
I believe system is not able to read the slab properly as there are 2 slabs with same charectristics.i want to delete the manully created entry, where can i locate it as it is not present in T7INT1.

Hi
Please update the SAP HR Patch level instead of changeing manually.
This will reflecting in T7INT1.
Thanks & Regards
Vikram

Similar Messages

System not calculating depreciation for assets

The system is not calculating any depreciation or even showing planned depreciation values under asset explorer.
Problem is in QAS client checked configuration and all settings are fine and in test client all is fine system is calculating depreciation. Please help thank you

Hi, check in AW01N in Posted values tab when last depr was posted and when next planed.
May be acquisition was in the next period from period in which you're trying to post depr. Or may be the case in Period control method, I mean that depr'd be calculated quarterly

BSI not calculating Tax

HI,
When I run payroll, it gives a message
1201
THERE IS NO ACTIVE TAX FORMULA ON FILE TO PROCESS THE CENTRAL BUCKS S D 084 TAX
FOR THIS DATE
Can someone help me with this issue ?
Thanks,
Sesha.
Edited by: Sesha Venkata on Feb 12, 2008 12:48 AM

You wrote:
In T5UTD, I have the following entries for PAAS
PAAS Central Bucks S D 01 Withholding Tax 10/31/1993 12/31/9999
PAAS Central Bucks S D 51 Employee Occupatio 01/02/2001 12/31/9999
PAAS Central Bucks S D 84 Local Services Tax 01/02/2001 12/31/9999
It doesn't let me delimit the entry for tax type 51. If you see in my other message, I mentioned the tables and entries that I updated. I don't understand why it isn't calculating taxes for 84.
Quick question, for my own piece of mind, what TUB level are you on?
I ask because I know through this process of OPT -> LST, that SAP and BSI have released several correction bulletins. To me, the tax type 84 entry with a begin of 01/02/2001 is wrong because the tax is effective 01-Jan-08.
Anyway, don't delimit the entry in T5UTD, delimit the tax model entry on T5UTE.
And another thing that I'm not sure I made clear(er) is that the message 1201 is a warning message. Payroll will still run, if anything, this message just indicates that your tax models need updating.
Regards,
Kevin

BAPI_ACC_DOCUMENT_POST not calculating TAX

Hi,
I am using BAPI_ACC_DOCUMENT_POST for posting the FI document for RC type. I tried posting it normally and it posted correctly. But when i give some ACCOUNT TAX information, it is not calculating.
Here is how I am filling the details.
Header:
BUS_ACT = RFBU.
USERNAME = SY_UNAME.
HEADER_TEXT = TEXT.
COMP_CODE = BUKRS.
DOC_DATE = 12/12/2011
PSTNG_DATE = 12/05/2011.
FIS_PERIOD = 00
REF_DOC_NO = 9700000036.
AC_DOC_NO = 9700000036.
Account GL Table:.
ITEMNO_ACC = 10.
GL_ACCOUNT = 412010.
DOC_TYPE = RC.
COMP_CODE = RECN.
FIS_PERIOD = 00.
PSTNG_DATE = 12/05/2011
TAX_CODE = TN
TAXJURCODE = TN3707600
COST CENTER = 107
Account Receivable:
ITEMNO_ACC = 20.
CUSTOMER = 1126045
COMP_CODE = RECN
BLINE_DATE = 12/12/2011.
PYMT_METH = B
CURRENCY AMOUNT : 2 LINE ITEMS
1ST LINE ITEM
ITEMNO_ACC = 10
CURRENCY = USD
AMT_DOCCUR = 500.00-
DISC_BASE = 500.00-.
2ND LINE ITEM
ITEMNO_ACC = 20
CURRENCY = USD
AMT_DOCCUR = 500.00
AMT_BASE = 500.00.
I did not enter the account tax table as I am not sure how to enter the date. But I know that the tax rate is 9.25% and for 500 the tax would be 42.33. I need to make sure that the BAPI posts the document as it posts from FB01 when we check the check box 'calculate tax'. Right now, with these details it is posting the data but not calculating the tax.
Please help.
Regards
Guru
Edited by: GuruCharan on Dec 15, 2011 6:28 PM

Raymond,
Thanks for the reply. I did read the notes you have suggested. They are quite informative but unfortunately -
Note 367175 is related to the other BAPI`s. My issue is with the BAPI_ACC_DOCUMENT_POST.
Note 487064 is related to the error when the tax amount is greater than the base amount.
Since I am using the Acc document post BAPI, please help me understand how to fill in the data for ACCOUNT TAX table or post the document from the BAPI along with the tax as it does in FB01.
Thanks Again,
Regards,
Guru.

Not calculating tax!

Hi freinds,
Whenever i am trying to give tax code in invoice, it is not calculating the tax and is giving a message "Customization for SWI1 j_1iindcus missing in the table" where SWI1 is my company code. Can anybody tell what the problem is and how to rectify it?
Thanx

Hi,
this amy be the case:- Go to IMG -> Logistics - General->Tax on Goods Movements-> India-> Basic Settings-> Determination of Excise Duty-> Condition-Based Excise Determination-> Assign Tax Code to Company Codes
and check do tax codes been assigned to company codes.
Rgds
S

System not calculating as mentioned in the price differentials multipliers

Dear Folks,
We are using contingent worker functionality in R12.1.3.
1) For example,we have a PO with line type as rated based temporary labour, UOM as "HR" , unit price as 100 and total amount is 100000.
2) Mentioned multipliers in PO for price differentials as Holiday as 2 and Overtime as 1.5.
3) In general working hours in a day is 8 hrs.The calendar defined in the system with Mon-Fri as working days.
4) Timecard entered in OTL with Sunday as '8' hrs, Monday as '10' hrs.
5) Whereas system need to calculate as for Sunday 8hrs=>8*100*2=1600 and for Monday =>10hrs=(8*100)+2*100*1.5=1100 in total need to show as 2700.
6) And those time card details interfaced from OTL to purchasing and it shows as received with an amount of 1800 as received in the PO shipments under more tab.
System does not calculated as per mentioned price differential multipliers.
Am i missing any setup?
Any help will be highly appreciated
Regards,
Sri.

Please someone help...I am stuck on this at some place or the other and now finally at this place when I thought that everything is well:(

Not calculating tax in invoice!

Dear friends,
I have created invoice, but it is not calculating the tax. What could be the possible reason and what could be the solution? What is the tax procedure used in this case?

Hi tasleemarif,
                   first of all check whether you have assigned a tax code to your PO in the invoice tab in item details screen,if it is being already done check whether that tax code has been properly maintained in the FTXP tcode,again check while doing the MIRO proper tax code is selected in the TAX tab.Also dont forget to check the calculate tax check.hope,this will help you out.
                                                                                regards,
                                                                                ASHISH.

Invoice receipt does not include tax for each item in PO history

Hi gurus,
            we received 2 items against a PO
netprice-- tax-----total
item 1--> 9010--
100
item 2-->205--
25
                      total GR amount           :      125
invoice received for $125
but if i see in the PO history the tax for both items is added up and shown for only one item.for 2nd item it shows only netprice,it doesn't show tax .
is it a config setting thats affecting this or any other setting that need to be looked at
The PO history looks like this:
for item 1----
for item 2)    .
GR--100--
25
Inv. Rec.-----105--
20
invoice verification is a new concept to me,I would appreciate any suggestions about the settings tobe looked at for rectifying this?
Thanks,
Chris T

hi Chris T
i think this not a config issue. i think the MM people when they do GR/IR they adding all tax to the net pice .
to solve this we can cancel that GR/IR and post with right net price
thanks,
subbu

Mid year golive, regular schema is not calculating anualgross for 12 month

HI
its mid year golive payroll , we uploaded april- sept old result. then run inlk schema.
after that when i run regular payroll system is not taking previous 6 moth salary for annual gross. semilarly system is not considering last 6 month for exemption also
i have uploded /130 tech wagetype also for old result but still its not working.
its calculating everything from oct - march .
please help

Hello Suprita,
I hope your query is on India payroll, if it is so then kindly raise your query in ERP HCM forum, this forum is specific to Payroll North America.
With Regards,
S.Karthik

System not coming up for PSS in AC 10.0

I started configuring AC 10.0 and added connectors using SPRO but when i go to nwbc to reset my password it is not bringing up any systems list.
Should i be checking something to bring in the list of systems.
Thanks
Uday

Hi Uday & Jagat,
As lmassena correctly mentioned Go to:
SPRO -> Governance, Risk and Compliance -> Access Control -> Maintain Connector Settings
Then scroll right and you will see a check box with label "PSS"
For other configuration details Please check SAP Note 1617371 and 1578837 for the detail Configuring Password Self-Service in GRCAC10 and Password Self-Service Email.
Thanks,
Guru

Loading date Not calculating Properly for Standard Order.

Hi Gurus,
I am facing issues in "OR" order type sales order where Loading date is not getting calculated correctly.
On discussion with the client it was clear that they tried to schedule the Order manually for couple of times.
But as much I believe Loading date should automatically be determined in SAP based on scheduling date.
can any one tell me if there is any OSS note available for this or do we have any alternate solution for this case.
Early reply Appreciated...
Thanks in Advance!!!!!!
Best Regards,

Hi All,
Any one who has faced this type of issue.

AED not calculated properly for imported capital Goods

Dear All,
I am facing one error while capturing Excise Invoice for Imported capital goods .While performing this AED set off reflecting is 100% which is supposed to be 50%.For raw material its calculation is correct .Any solutions.
Thanks.

Hi
check following link
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f?QuickLink=index&overridelayout=true]
Regards
kailas ugale

Purchase Requisition not calculating tax

Hi
I have a problem with the requisitions,when we raise a requisition it is suppose to calculate tax(VAT) but for some requisitions it doen't,
any idea

Hello,
Is it something like, you are getting the error while approving the requisition? If so what is the error?
Whether the e-tax engine has been setup properly in your organization?
Rgds,
Jyoti

Why won't the present system not execute download for sys 7 or 8 help me install it.

it says download new version... either it never downloads or... doesn't execute when it does... have tried numerous times

Have you downloaded Firefox 8.0.1 from http://www.mozilla.org/en-US/firefox/new/?
Did you run the installer? Any errors?
Your userAgent string shows you are running Firefox 5.
Your UserAgent string may just be wrong. Try the following:
Type about:config in the URL bar and hit Enter
If you see the warning, you can confirm that you want to access that page.
Filter = general.useragent.
Right-click the preferences that are bold, one line at a time, and select Reset.
Then restart Firefox

Tax not calculating in PO

HI MM Gurus,
I have maintained the necessary condition type in ZTAXIN (Copy of TAXINN) Procedure for Surcharge which is calculating on VAT 12.5% for Haryana State. System is not calculating for this condition type but system is calculating Taxes for other condition types.
I have checked in FV12 also, records are exists. I have also checked in Tax condition type it is also showing the records for access.
When i am checking analysis for Tax Procedure for Surcharge condition it is showing error as - "Condition record exists (Manually removed)".
Kindly help me to resolve this issue.
Thanks in advance.
Regards,
Neeraj Saini

Hi, Neeraj
The purchase order you are talking of, was it created before this changes were carried out? If so, this changes will not get effected. in this case create a New purchase order.
Even after this if the error exists then check the following:
1. The condition type should be a copy of VAT condition type.
2. The condition type should of category "Tax".
3. Check there is no conflict of condition records, try to maintain condition Record using the same acces as that of VAT.
4. Use the same Tax Code as that of VAT condition type.
Hope this will correct your problem.
Regards

System Not Calculating Taxes for Slab-Men.

Similar Messages

Maybe you are looking for