T43 Need to activate Security Chip after every boot

Hi!
I have a TP T43 - model 2668 K6G. My problem is that I have to activate the Security Chip in the Client Security application (8.20.0023.00). Thus I have to boot and then reboot to get up and running. I use the Password Manager so I need the Security Chip to be activated.
Hope to get help soon :-)
Best regards
/Erik

Security chip is "married" to the board it came with in the first place, and hence not replaceable.
You can safely junk that planar.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

Os 10.6.8 hung up after every boot

Hi
My Imac os 10.6.8 hung up after every boot. It works well in Safe mode but in normal mode it gets hang after 2-3 minutes.
Also the volume keys are not working and it is showing the cross mark and the headphone jack light is ON at the back.
So please let me know the solution.
Saurabh Pancholia
Message was edited by: sp_saurabh2000

Download it is going to some other page
What other page? I just downloaded it, so the link is okay, at least for me.

T61 will not activate Security Chip to run Password Manager

I have a T61 running XP SP3. My PC is just out of warrenty so I can't contact them about support. I recently had a problem with my battery and it basically took down my intire computer and it wouldn't boot. So I have a slightly newer T61 in my office I put my hard drive into it and booted to use until I could get mine back to working. All was well till I switched back to my original PC and it started saying that my Security Chip needed to be activated in order to you the security features on the PC. When I clicked to activated it it said it needed to reboot....so after reboot, it came back up again. I have tried this many many times and can't get it to activate. I have tried making the chip all 3 possible states (Active, Inactive and Disabled) and nothing seems to work. I also tried clearing the chip per some instructions I found on forums. This didn't work. The last thing I tried was to restore to factory install using the Lenovo factory restore. This all went well, but as soon as everything got installed I started getting the Active Security Chip message after boot.
I don't really care about anything the chip does except the Password management feature. I have never used the other features mentoned about locking bios and the harddrive. Today I tried telling the Message to not display the message again. It doesn't come up now when I reboot, but neither does the PW manager. Also I can't get the message or security center to come back up when I launch it from the Lenovo Panel.
I have seen several posts simillar to this, but they all recommended things I have tried, or didn't have responses.
I am game to try almost anything at this point????
Any help at all will be much appreaciated
Thanks in advanced

Hi Ray,
Welcome to the Lenovo forum
I would hazard a guess that Client Security Solution was installed while your security chip was active, and is expecting to use it. And since it appears that your system is having some problem with its security chip, Client Secuity Solution doesn't work right.
Client Security Solution (CSS) does not require the security chip in order to operate. It's been awhile since I used it, but if you start the CSS main interface, I think there is a configuration option to tell it to use the security chip or not. If you can find that configuration option, try telling CSS to NOT use the security chip, and then reboot, press F1, and disable the security chip in BIOS setup.
If the above doesn't fix your problem (or if I'm mis-remembering about being able to change the CSS security chip option after it's installed), you could try removing CSS and then re-installing CSS after you've disabled the security chip in BIOS setup.
There may be a better / easier solution... you might want to wait a bit to see if someone with more CSS experience has better ideas.
Good luck!
-Frank
Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
Did someone help you?
Say thanks! with a kudo.
Even better: Pay it forward, help someone else.

When using rogers.yahoo mail, I need to refresh my screen after every 2-3 actions.

While using Rogers.yahoo mail in FireFox, the screen freezes after every 2-3 actions (read email, delete email, respond to email, move email to folder etc.). I have to refresh the screen and then it goes along for another 2-3 actions and I have to refresh again. Very frustrating. I opened the same email account in Google Chrome and IE and it works fine there. This started happening yesterday.
In perhaps an unrelated thing, I get this error message every day, once, when I start up my PC for the past 2 months:
Microsoft.NET Framework
Unhanded exception has occurred in your application If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately. Unable to load DLL 'hppatusg01.dll': The specified module could not be found (Exception from HRESULT:0x8007007E)

No problem.
If the above does not fix the issue, '''try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Do I need to upload entire site after every change?

Publishing to a folder, then uploading with Fetch. If I make a change in on one page (and my site has 11 pages), do I need to upload the entire site every-time? I make changes and additions all the time.
iWeb 1.1.1.
Sorry if this topic has been discussed before. Thanks, Marcos

Marcos ~ Click below to read an article "Using Fetch with iWeb":
...it says:
"When you re-publish your website after making changes, iWeb re-creates every file, even if you just made one change on one page. As a result, if you are using Fetch's Mirror command to upload your website, every file will appear to be newer than the ones on the server, and all files will be uploaded again. This is a limitation of iWeb, and there is no way to work around it currently."
In September 2007 I asked the guys at Transmit about this and they replied:
"Transmit is in the same boat as Fetch. There is currently no workaround for this, as Transmit 3 was only designed to consider dates when synchronizing, not size. Transmit 4 will be able to compare sizes."
(The current version of Transmit is 3.6.5)
RBrowser has +Folder Syncronization+; click here:
"RBrowser's sync engine will automatically find your changes and publish your new and changed files only to the remote server."
...But perhaps you would have to buy the licensed version to get that feature:
"Absolutely unrestricted operations in all protocols (Local, FTP/SSL/TLS, SFTP-SSH), *including Folder Sync*."
...you could try the free version first and see if it has that feature.
Here's a comprehensive list of Mac file transfer software:
http://www.macorchard.com/filetransfer/
By the way, when publishing to .Mac, only the changed pages are uploaded.

Need To Replace Security Chip

Hi,
I apologize before hand if this falls outside the terms of the forum's TOS.
I recently bought an A31 board on Ebay (fru 93P3553). When the machine booted, I got a pattern of 4 beeps repeated 4 times. I looked up the code and got a missing security chip error.
So I pulled a security chip (p/n 26P8193) from a dead A31p board (fru 26P8430), and the machine came to life. It presented a 0192 error when I pressed F1 to enter the bios, but I was given the option to press F1 again, and I was in the bios. However, I cannot boot to Windows...the machine sits still for a bit, before it presents with 2 beeps.
I looked that scenario up, and based on this thread (http://forum.thinkpads.com/viewtopic.php?t=39204), I believe all I need to do is purchase a security chip actually designed to work with my board. I'm wondering if I can have some help figuring out the fru for the security chip that corresponds to the fru on my board (93P3553). I've looked the board up in the maintence manual, but that particular board fru number isn't listed...
Additionally, my bios version is 1.09 (1NET15WW)
Any help would be greatly appreciated.
- Nycto
Message Edited by Nycto on 07-10-2009 06:00 PM

Security chip is "married" to the board it came with in the first place, and hence not replaceable.
You can safely junk that planar.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Language selection pops up after every boot.

After every reboot, I first get the language selection option. Not a big problem, but I prefer not to have to select the language every time.
Anyone any ideas how to switch this off?
Thxs
Solved!
Go to Solution.

Sometimes the chip itself can differ in size and contact surface.
I remember this from way back, and if changing the SIM won't do the trick I suggest that you try reinstalling the phone software. That should definitely fix this.
http://www.sonymobile.com/gb/tools/update-service/
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Unlocked 'internet & network' configurtaion after every boot ?

Hello,
my "internet & network" configuration is unlocked
ater every boot or reboot. If i lock the configurtation
manually and unlock it again, so i will ask to my password.
But after a boot or reboot, there is no password question to open the configuration, this part is unlocked automatically.
What is happend ? Is my system unsecured ?
Thank you for your help and
best regards
oelauge
iMac (intel) Mac OS X (10.4.6) With all updates

oelauge,
Locking secure system preferences may help
you solve your problem. I did not have a link for
10.4 Help, but the information on the Mac OS X 10.3
Help is identical.
Let us know if that solves your problem.
;~)
Thank you,
the problem is solved with your help.
Best regards
oelauge
iMac Mac OS X (10.4.6)

HT5622 im needing to activate my iphone after a restore, when i try too it says "this apple id cannot activate your iphone" but it is the one i used to set it up in the beginning. HELP!!!

help me

You need the correct Apple ID and password, there's no way around this. Try:
https://appleid.apple.com

MacBook Retina shuts down after a few seconds after every boot

Hi there
My retina macbook keeps shutting down after booting and rebooting by its own a minute later. No error message is displayed or anything like it, it just magically shuts down.
It had been working fine until now but it seems to be going crazy for whatever reason...
When it shuts down by itself, I can't turn it on myself. It does it on its own even if the lid is closed and then shuts down again after about 30 seconds.
This only happens when it's connected to a power source (it doesn't even start when it's not).
I have tried to reset the PRAM without success.
The only time the issue doesn't happen is when I do a Safe Boot.
Can anybody tell me what is up with my Macbook (I really need it for work AND school).
Thanks

Have you done a SMC reset?
http://support.apple.com/en-us/HT201295
Run an Apple Hardware Test:
http://support.apple.com/en-us/HT201257
Download and post an EtreCheck report:
http://www.etresoft.com/etrecheck
Ciao.

Irritating: Recovered Files Folder in Trash after every boot

I have a clean installation of Snow Leopard on my 2009 iMac. The computer came with Leopard. But I gave uncle Steve $30 and got the Snow Leopard disc.
I did a clean installation; did not use any time machine recovery or reuse any old data. Just CLEAN.
Now, after each shut down and restart cycle, the Trash can has crumbled paper. This really bothers me. I thought Macs suppose to work correctly. I did not delete anything and nothing should be in that Trash. If OS deletes something, it should take care of it behind the curtain. I don't want to see trash in the Trash can.
So I opened the Trash and see what's inside it. Every time, it is a folder called Recovered Files, and it has 0 bytes in it.
I have no other software installed on the computer. All latest updates applied as of Mar 27.
Any ideas?

Exact same problem here as Alex and Bishboria.
I'm always cleaning my Trash, whatever I reboot, shutdown or wake-up the computer from sleep mode, the previously empty trash get an empty "Recovered Files" folder...
This happens since Snow Leopard upgrade. Subsequent versions of Snow 10.6.x didn't correct this behavior.
Same wish than Alex: if the system is performing some auto-cleaning at each restart cycle, fine, I'm glad that the system takes care of itself and of my computer. But don't show me this empty folder... Let me handle MY trash! So that I know when I forget to empty it.
It should goes to another post, but this "bug" belongs to the (long?) list of Snow's glitches: longer time to boot, slugishness response from internal harddrive. Should I go back to Leopard which was so responsive? The brand new full-64bits-Kernel isn't it supposed to be faster, stronger, more efficient than the 32bits one?!

Bug: Your last browsing session closed unexpectedly message after every boot

It appears HP Smart Web Printing 4.51 has a bug. After installing it on Vista Ultimate 64-bit Internet Explorer 8 (32-bit version), everytime I shutdown then start up the computer and open up Internet Explorer 8, I get the message: "Your last browsing session closed unexpectedly. Restore your last session or Go to your home page". And this happens after I close down Internet Explorer 8 normally. This never happened before.
I did a test: closed down Internet Explorer 8 normally, uninstalled HP Smart Web Printing 4.51, and rebooted my computer. The "Your last browsing session closed unexpectedly" message did not appear anymore. Definitely a bug.

I'm sure that there can be other causes to this with IE, and if you are not running HP software on your XP then it is not related, however it is the cause for us running smart web printing on our particular machines.
I have four: two deesktops, two laptops, running from XP sp3 to win 7 RTM - all running ie8, all started the same issue after install of SWP latest version, note latest version. and all stop after that process is either prevented from running on startup, or the program is removed. Enough proof for me considering the history of this company's SW packages.
If I dont find another solution I plan on disabling the notification thru a registry edit. It's annoying more than helpful to receive it every single time you open for an initial session, plain and simple, and a result of bad coding.

Tiff file launches right after every boot

Earlier this week I cloned my mac's original 160gb drive to a new 500gb drive and swapped them. Everything is great, except for one thing. When the system boots up, right as the desktop becomes usable, a tiff file, MainVolumeSliderTrackDisabled.tiff opens up in Preview. This file is a part of Movist, but that app wasn't updated anywhere near the time of the drive swap. The Movist forums don't have anything even related to this issue. This happens every time the computer boots up. I have no idea what could be causing this. Any suggestions?
I booted up on the original drive once after the clone and the tiff did not launch on boot. I swapped the drive and the clone popped the file on first boot and all boots since then. I'm really at a loss on this one.

Ok, feeling a bit sheepish at the moment. I can't believe I've never even noticed the Login Items panel before. Pardon me while I go sit in the corner with a dunce cap on for a while. Thanks, R C-R!

Requires immediate Restart after every booting

Hmm....this just started happening this evening. I came home, logged on to my computer and it booted up just fine. Within 30 seconds, the screen went grey and a window appeared that said I must restart my computer.
I restarted it and it did the same thing again. Did it twice more and it told me to restart twice more. Any ideas what is going on? Thanks.

Hi Jeff,
Unfortunately you are suffering Kernel Panics. These can be due to hardware or software issues but cheap RAM, dodgy USB drivers and devices, and corrupt OS are common causes.
I'd advise removing all 3rd Party RAM and all USB devices (except the Mouse and Keyboard) and the have a read of this article (Thanks to Dr Smoke).
Be sure to back-up your data as soon as possible. Later steps involve erasing the hard drive. If you need tips on how to do this let us know.
A systematic approach solves most of these issues so please do let us know how you get on.
Good Luck
mrtotes

Kernel Panic in Lion after every boot up

http://www.mediafire.com/?8r8y6bz0vsy4803
Anybody know what's up with my installation? I just upgraded my 2011 MBP through app store from newest Snow Leopard, everything updated (I think) - to Lion, and I can only boot in safe mode so far...Kernel Panic list in the link above

Start by uninstalling the software responsible for these extensions. Or you can boot into Safe Mode which will disable third-party extensions to see if that stops the panics. Most likely your problem is incompatible software.
com.paceap.kext.pacesupport.snowleopard          5.7.2
net.telestream.driver.TelestreamAudio          1.0.3
com.waves.driver.soundgrid          2.0.0
com.protech.nosleep          1.2
com.m-audio.driver.firewire          1.9
at.obdev.nke.LittleSnitch          2.4.0

T43 Need to activate Security Chip after every boot

Similar Messages

Maybe you are looking for