Table width are different for IE, than with MZFX & GLE
Hi everyone,
I have three tables and would like them to be the same width (for looks).
I tried the following:
#code_selection {
width:50px;
margin-left:30%;
#wash_type {
width:398px;
margin-left:30%;
#wash_schedule {
width:398px;
margin-left:30%;
In IE, they are not aligned, but in Mozilla & Google they are?
Can someone explain, what's happening?
Thank you.
Sorry Jon,
The wrong/bad alignment:
| Table1 |
| Table2 |
| Table3 |
The right/good alignment:
| Table1 |
| Table2 |
| Table3 |
I don't know how this is going to come out, but it suppose to be aligned perfectly one on top of the other.
Here is the site: http://108.132.14.185:80 <------- look at tab codes
Let me know if this is still unclear? I will try again.
Similar Messages
-
Where to see activities, which are created for the campaign with target group
Hi
I have created a Communication Method in SPRO -> CRM -> Marketing -> Marketing Planning & Campaign Management -> Campaign Executtion - Define Communication Method : Activity has been configured
Activities are not appearing after creation of campaign with target group.
Where to see activities, which are created for the campaign with target group?
Regards
HamidHello,
alternatively to check table CRMD_ORDERADM_H directly you can use the related transactions search for the campaign:
This should bring all activities generated by the campaign. If this is empty first check the job log of the campaign execution job again:
This gives information if any target group members have business transactions created. If the log does not contain the required information you can debug from SM37. The business transactions (activities, leads, sales orders) are generated from function module CRM_MKTTGGRP_PROC_CREATE.
best regards,
Johannes -
Balance Display are different for the same GL account in FS10N & FAGLB03
Hi,
It was noted that the GL account Balance Display are different for the same GL account in FS10N & FAGLB03.
Please advice what would have cause the matter.
Thank you,
Regards,Hi Vani,
Think you are using version 6.0.
I had observed that TCode FAGLB03, displayes balances for particular Ledger (0L) leading by default.
While in FS10N there is no option for selecting ledger.
Try FAGLB03 with all ledgers one by one.
Add the total and then try to matc wiht FS10N.
Assign points of Good.
thanks -
BEx:Hierarchies in DIM and FAC are different for Cost Element
Hi Experts,
Whenever we execute a report we are getting a warning message as "Hierarchies in DIM and FAC are different for Cost Element", but in report level we are not maintaining hierarchy properties for Cost Element.
We have executed Master Data tests in RSRV also and still the problem.
Is any other to do to get rid of this warning message?
Thanks in Advance.
Regards,
RAO.Hi all,
I face the issue like this but with transaction KOAP - Plan settlement
But, the problem is that, I do not active reconciliation ledger, so I do not maintain any thing relate to reconciation ledger or adjustment posting? I can do transaction "actual settlement" without error
So, How this error come to me?
And how I can fix it?
Thanks all! -
I am trying to put music from two different libraries onto my iPod. In the first case, I can, but in the second, the program says it will erase all content and sync only the playlists Ihave checked. What in general is the method for loading an iPod with music from two different libraries?
Yes, if, you manually manage music and videos, iTunes syncs the content immediately. If you deselect “Manually manage music and videos,” the content you added manually is removed from iPod touch the next time iTunes syncs content. To transfer music from multiple computers, your device must be set to "Manually manage music," sometimes referred to as manual mode.
In general, follow these instructions for Using iPad or iPod with multiple computers, http://support.apple.com/kb/HT1202 -
Calendar colours are different in iPhone than what's on my iCal
Why is it that the colours that I assign in iCal on my computer is different than the colours I see for the same events on the Calendar in the iPhone?
Say, for example, I set an event for MISC for a whole day for today, and make it Red in my iCal - when I look at it in my iPhone, it's Orange. When I set it as Green, then it's Blue. When I set it to Black, it's Red. When it's Blue, it's Purple. And so on.
Is there something wrong with my iPhone, or is there a patch?
Thank you"It's not a bug, it's a feature."
You can't easily fix this - only Apple can do so! They've released a kbase article with the explanation excuse that it is normal for the calendar colors not to match.
There is a workaround, although it is something of a pain. The iPhone will apply calendar colors in the following order: red, orange, blue, green, purple. (If you only sync one calendar, it's blue).
Depending on the colors you want, you first need to create 'blank' calendars in iCal to 'use up' unwanted colors. Then, you need to sync the calendars, one at a time, in color order.
Go to the Info tab (in iTunes with the iPhone connected and selected in the devices list). With the Sync iCal calendars box checked, UNcheck all the boxes and sync. Then, check the box for the calendar you want to be red. Then sync (if you look on the iPhone at this point, that calender will be blue, since it's the only one). Then, check the box for the calendar you want to be orange, then sync. Repeat for blue, then green, then purple.
For example, if I want to have two calendars, Home colored blue and Work purple, I would create three new calendars - empty1, empty2, empty3 - then check the boxes in the following order, syncing between each: empty1, empty2, Home, empty3, Work.
You only need to do this once (as long as you don't delete the empty calendars in iCal) - after that, iTunes 'remembers' the colors and maintains them.
Also, you can submit feedback to Apple: http://www.apple.com/feedback/iphone.html. -
Dimension Table contents are different after cube copy - why?
To all,
I'm doing some work on a cube based on some bad dimensioning in it's original design. We're running BI 3.50 - The original cube is INV_C01 - here is the table contents based upon SAP_INFOCUBE_DESIGNS report -
INV_C01 rows: 243,680 density: 0.0 %
INV_C01 /BIC/DINV_C011 rows: 307 ratio: 0 %
INV_C01 /BIC/DINV_C012 rows: 17,617 ratio: 7 %
INV_C01 /BIC/DINV_C013 rows: 10 ratio: 0 %
INV_C01 /BIC/DINV_C014 rows: 9 ratio: 0 %
INV_C01 /BIC/DINV_C015 rows: 95 ratio: 0 %
INV_C01 /BIC/DINV_C016 rows: 40 ratio: 0 %
INV_C01 /BIC/DINV_C017 rows: 2 ratio: 0 %
INV_C01 /BIC/DINV_C018 rows: 1,737 ratio: 1 %
INV_C01 /BIC/DINV_C019 rows: 7,141 ratio: 3 %
INV_C01 /BIC/DINV_C01A rows: 1,737 ratio: 1 %
INV_C01 /BIC/DINV_C01B rows: 1,737 ratio: 1 %
INV_C01 /BIC/DINV_C01P rows: 2 ratio: 0 %
INV_C01 /BIC/DINV_C01T rows: 74 ratio: 0 %
INV_C01 /BIC/DINV_C01U rows: 24 ratio: 0 %
INV_C01 /BIC/EINV_C01 rows: 243,680 ratio: 100 %
INV_C01 /BIC/FINV_C01 rows: 0 ratio: 0 %
The INV_C012 with a 7 % ratio (this is dev, production is much higher) is what I'm working to eliminate - it's too high. I then made a copy of this cube and copied all the data to this copy with no structural changes. I see this now in the copy -
INV_C01_C rows: 194,720 density: 0.0 %
INV_C01_C /BIC/DINV_C01_C1 rows: 118 ratio: 0 %
INV_C01_C /BIC/DINV_C01_C2 rows: 1,755 ratio: 1 %
INV_C01_C /BIC/DINV_C01_C3 rows: 10 ratio: 0 %
INV_C01_C /BIC/DINV_C01_C4 rows: 9 ratio: 0 %
INV_C01_C /BIC/DINV_C01_C5 rows: 95 ratio: 0 %
INV_C01_C /BIC/DINV_C01_C6 rows: 40 ratio: 0 %
INV_C01_C /BIC/DINV_C01_C7 rows: 3 ratio: 0 %
INV_C01_C /BIC/DINV_C01_C8 rows: 1,737 ratio: 1 %
INV_C01_C /BIC/DINV_C01_C9 rows: 1,737 ratio: 1 %
INV_C01_C /BIC/DINV_C01_CA rows: 1,737 ratio: 1 %
INV_C01_C /BIC/DINV_C01_CB rows: 1,737 ratio: 1 %
INV_C01_C /BIC/DINV_C01_CP rows: 2 ratio: 0 %
INV_C01_C /BIC/DINV_C01_CT rows: 73 ratio: 0 %
INV_C01_C /BIC/DINV_C01_CU rows: 13 ratio: 0 %
INV_C01_C /BIC/EINV_C01_C rows: 0 ratio: 0 %
INV_C01_C /BIC/FINV_C01_C rows: 194,720 ratio: 100 %
Note that INV_C01_C2 now only has 1,755 rows, whereas the source cube has 17,617 rows. Why is this? I did a straight copy and the F table has approximately 50k less rows and this table is approx 10 percent of the source.
Any explaination would be appreciated. KenWas data ever deleted from the first cube? Either using selective deletion, or possilbly just the deletion of a Request. Those dim IDs wouldn't be recreated in the cube copy. There is an RSRV test that checks for unused Dim IDs and can delete them if you want.
If you use the option to load packets in parallel, it can lead to multiple Dim IDs being created for the same characteristic combination. There is an RSRV check for duplicate Dim IDs, which can eliminate the duplicate Dim IDs if you tell it to.
One other thin got keep in mind - SAP INFOCUBE_DESIGNS is using data from DB stats to provide the row counts, so if your DB stats for the dim table are not current, you could be seeing row counts that are old. -
Colours are different in PS than everyother program on my computer. How do I fix this?
So I just recently started with PS and this is a big problem since I mainly use it to paint and it would be great to know that what I paint is what actually will become the picture
When I open a BW picture it turns out sepia in PS, and likewise, saving a picture that looks sepia in PS will turn out BW when saved in Jpeg or another format that is viewable in other programs than PS. Basically, all the pictures I've saved have turned out much more blueish than I intended them to be.
How can I fix this? I would be SO happy for help!!
//MikaelaRefer to this as a start:
My colors look different outside Photoshop.
Mylenium -
SWITCHOVER_STATUS value are different for Oracle 11gR1 and 11gR2
Hi All,
I would like to know why is there a difference in the SQL output when run on a 11gR1 and 11gR2 Primary database in a DataGuard configuration.
On a 11gR1 Primary database
Open an SQL Session on the Primary database and run the SQL statement
SQL> select switchover_status from v$database;
To Standby
Now open a second SQL Session
Run the above SQL statement
SQL> select switchover_status from v$database;
Sessions Active
Now, when I do the same on a 11gR2 Primary database here is the result
On a 11gR2 Primary database
Open an SQL Session on the Primary database and run the SQL statement
SQL> select switchover_status from v$database;
To Standby
Now open a second SQL Session
Run the above SQL statement
SQL> select switchover_status from v$database;
To Standby
Is this a bug in 11gR2 ? Is there a patch/fix available ?
Oracle 11gR2 version 11.2.0.1.0
TIA,
SudhirHello Loic,
The result on the Standby Database is "Not Allowed". This is because there is no alternative Standby Available.
I have some scripts which does the switchover based on the Database status. As per Oracle 11gR2 DataGuard Admin docs.
Cut pasted for Oracle DataGuard Admin docs.
Step 1 Verify that the primary database can be switched to the standby role.
SQL> SELECT SWITCHOVER_STATUS FROM V$DATABASE;
SWITCHOVER_STATUS
TO STANDBY
1 row selected
Note: The WITH SESSION SHUTDOWN clause can be omitted from
the switchover statement if the query performed in the previous step
returned a value of TO STANDBY.
When I use SQL statement "ALTER DATABASE COMMIT TO SWITCHOVER TO PHYSICAL STANDBY;" and if there are Active SQL sessions then I get the error
ALTER DATABASE COMMIT TO SWITCHOVER TO PHYSICAL STANDBY *
ORA-01093: ALTER DATABASE CLOSE only permitted with no sessions connected
Thanks,
Sudhir -
How to close open POs which are open for more than two month
I am new to MM please somebody help me with this
Thank youthere is NO STD SAP program which will help u closing the open PO (more than two months)
you need to go each and every PO and mark it as Del completed (item level in deleivery tab)
but this is only stastestical indicator. System wont stop you creating further GR against such PO if any Qty leftout.
for example - PO order 10EA, you recd 8EA and marked the indicator , still you can make the GR for 2EA
there is SPRO setting as well to mark the PO as delivery completed once PO Qty and MIGO QTy is equal or with some variance . but this will work on real time
Another way to set the final invoice indicator in invoice tab
system will allow you to post the further invoices but all be blocked.
somebody need to go and verify the blocked invoices and take necessary action
This is again a manual activity, there is no such STD setting or T code exist
Another way is you can create a program with the help of abaper
built a logic on date / QTy and Amount and update the PO for del complete ( EKPO-ELIKZ) and final inv indicator (EKPO-EREKZ) by using BAPI PO change
hope this will help you -
I have a new computer that we set up with itunes home sharing and I need some assistance. I also have my own apple id and would like to make the new computer the one I use for my music. Should I set up a whole new itunes library/account or still work with the home sharing?
Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
As IO said before:
You can redownload most iTunes pruchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
I do not think it included audio books. -
Hi Experts,
When I check the billing document (Go to>Header>Output) there are 3 output types. After executing VF02, an output type is added (EDI). Why does this particular output type (Z***) not appear in VF03?
- What are the related configurations for this?
- Is this a possible ABAP issue? To my knowledge, custom programs usually do not result to this kind of behavior.
Thanks in advanced,
JackJack Rockefeller wrote:
I'm not a functional consultant but an ABAP consultant.
Ah, OK, that explains it. Jack, I'm sorry but it's not quite feasible to explain the whole output determination configuraton in a discussion post. Here is a wiki page if you have some time for reading. It's not very thorough but you could google for more. But it would be more efficient to just ask an SD consultant.
Also in VF02 look at the Output Determination analysis (it's somewhere in the menu in the Output screen) and see if it makes any sense to you. -
Area Chart for More than 4 Groups
Area chart will allow me to add 11 items under Show Values in Chart Expert, but the colors I select for each keep changing. Also can't get items to display in alphabetical order. Any way to do this? I'm running Version 11.5.10.1263.
hello Royal,
can you post a screen shot of your chart as it is now as well as a mock-up of what you'd like it to look like?
-jamie -
Filters different for mac than windows such as photocopy filter
hi
has anyone experianced differet filters reacting differently when changing from a mac to windows, in particular photocopy filter?
thanks,
HelenIf you really want someone to blame, then the people who own palm should be somewhere in the firing line, as they have halted any further development on the mac platform despite palm OS once being considered the natural companion of the mac. If you notice in the account setup for palm forums there is as yet still not even an option to choose mac osx 10.5 leopard, and the desktop software is written for PPC computers as opposed to intel ones. If you have an intel mac therefore, it will run really quite slowly.
Post relates to: Palm V -
Showing highlight areas in Curves other than with mouse
I want to set the highlight and shadow sliders in Curves but am finding the mouse a pain to use because it is not sensitive enough. When trying to set the shadow slider to just under the darkest region (no clipping), I typically do this:
1. Option-Click the black slider and drag it to the right until the shadow detail appears.
2. Back off until it disappears.
Trying to do that with a mouse is fiddly, not helped by the hysteresis in the system. Say the first shadow detail appears at level 15. When you reverse and go to 14, the shadow detail increases. That is another pain.
Anyway, I'd like a method that uses the arrow keys to show me the shadow and highlight areas.
Am I in luck?If your just using a curves adjustment, not a curves adjustment layer, then
you can check the Show Clipping box, click on either the highlight or shadows
slider, highlight the numbers in the box and use the arrow keys.
With the new style adjustment layer panel, that doesn't seem possible.
What you could do is record an action making a new curves adjustment layer
and make sure the show dialog is on.
This will get you the old style curves adjustment layer dialog which works like the
regular curves dialog as above.
MTSTUNER
Maybe you are looking for
-
Physical Inventory Movement Block not Rest at Storage Location Level
Hi, We are facing a typical problem in our Production System and the issue is as follows: 1. We have created a Physical Inventory Document for a material with Freeze Book Inventory and Posting Block indicators. 2. We completed the count and entered t
-
Changing my gallery address on my Iphone 4
Hi can any one help, I want to change my gallery address, I have a .mac address for my gallery and when I set up my Iphone I put in my mobile me email address, When I try to save to mobile me it does not save to my main gallary address, which isb at
-
I'm creating a GUI application in NetBeans, where I'm using jFileChooser object to select a file when a user clicks a button, the filechooser dialog appears and doesn't respond to the user's action but after closing the file chooser using the close b
-
hello! It is a pity that there is no such option in this forum: http://pleasefixtheiphone.com/ What do you think about this idea?
-
I have purchased and installed acrobat XI pro. When I run it a window pops up saying the the serial number I have provided is valid but a qualifying product cannot be found on the computer