Target location

Hi Every One:
i did map bw external as a source n table as a target. when i deploy after location registration. it give this error " Can not Deploy: target location is owned by different run time plat form." Is there any who can help me. Me a student n doing final year project.
i did not make process flow when i deploy. is it necessry there must be a process flow before deploment. but when i did the same thing with flat file it worked perfectly n i did not make process flow.

Hi Every one:
i made a prcess flow and my target schema is owbtrg1 that i created under run time assistant. run time owner is owbuser n its user is owbuser1. which user should i use for its location registration. i register the locations of target useing owbtrg1 and it work perfectly. but i register it through this schema and deploy it but it give the following error. is there some body who can help me?.
"RPE-02053: The Oracle Workflow version cannot be retrieved.
This may have been cause by an incomplete or incorrect installation of Oracle Workflow
or the schema may not contain an Oracle Workflow repository.
Please check the location details, reinstall Oracle Workflow, if necessary and try again.

Similar Messages

Weird CS4 error when saving eps files on a Mac: "...specified files already exist in the target location"

Hi There,
All 3 workstations in our studio are experiencing weird file behavior when re-saving eps files from Illustrator.
Basically Illustrator creates a new file in addition to the original and adds a "-01.eps" onto the file name. If you re-save your original, Illustrator brings up a dialogue box that states:
Some of the specified files already exist in the target location. The files marked below will be replaced:
filename.eps
filename-01.eps
We've been deleting the "-01.eps" files each time but it's becoming tedious. The behaviour occurs when re-saving an eps file to a server or the desktop.
All machines are new Quad-core MacPros running:
- Leopard 10.5.8
- Illustrator CS4 14.0.0
We've checked for Illustrator updates from within Illustrator but we seem to be running the latest version.
Is anyone else experiencing this behavior?
Any help or pointers in the right direction would be much appreciated.
Cheers
Ben

Thanks for the reply.
The error occurs when we save the document but if we choose save as, "Use Artboards" seems to be unchecked so not sure if this issue is related or not. Will re-save the document using save as then see if the issue persists.
Why do we still use eps?
Basically because we've found it to be much more compatible. Our entire logo library is in eps format (18 years worth) partly because it was previously the only format to use and partly because it allows account managers to send logos to clients, printers, TV stations etc and not involve the studio (saving out an eps version).
Although "Create PDF compatible file" is a good idea, we've encountered costly issues with colours and images - especially if the recipient is using old CS software, non-Adobe software or is using some kind of hardware RIP. We now just go with what we know works.
But I do find saving eps versions of everything to be a bit painful. In fact, I've always found Illustrator in general to be a bit painful when compared with Photoshop or AfterEffects. Illustrator seems like it's been developed by a different company some times!
Cheers, and thanks for the help.

ITunes won't open because target location is unknown.

I've downloaded the new version of iTunes and when I try to open it up, it does nothing. I was curious so I looked in the properties and I noticed it has no TARGET LOCATION, hence it's inability to open. Also, where it says TARGET, it only says iTunes. It won't let me edit these in any way, so I'm so confused on what to do.
Has this happened to anyone else?
Thanks.
Windows XP

Megan hello,
welcome to the Apple Discussions open the iTunes folder in your Music folder and select the iTunes 4 Music Library file... type cpmmand - D and this will duplicate the file... put the original file on the desktop and change the name of the duplicate to be the same as one you just moved ... double/click on this file after the name change... if all is okay you can trash the file on the desktop later..
let's know if it all works again Megan .... TP

"Not enough memory in target location" error in de...

When I try to download and "save to device" any files from any website of any size, I am receiving the "Not enough memory in target location" error. It's very frustrating . To reproduce I only need to do a "long tap" on the google image on the default google page and select "save image as" and select any location (eg. documents, root (MyDocs), create new folder) and I get the error. Once the error is displayed, most of the time I can't get rid of it and need to do an "End current task" to close the browser.
I have checked the output of a "df -h" and there is PLENTY of space on all volumes, including rootfs (95.1M Free) and /dev/mmcblk0p1 (25.9G Free!).
I've tried flushing the '/home/user/.mozilla/microb' directory and deleting the '/home/user/.browser' file also.
I can transfer files from my PC connected in Mass Storage mode with no problem, I can also create directories and files from X-Term also with no problem.
The only information I can find on this error is related to rootfs being out of space when trying to install an app or update...but this is not my problem.
I have a feeling it could be a permissions issue, anyone have any suggestions?

Hi cpitchford. I have a similar problem. I can't save a bookmarks in the MicroB explorer. The system says "Not enough memory". I read your post and send you the screenshot for the xterm. Thank you for your time. Let me know if you need more informartion about the issue
Attachments:
screenshot03.png ‏93 KB
screenshot04.png ‏98 KB

Where is the best target location to put configuration files (.csv), report templates (,dotm) and instructions (.pdf) when building a LabVIEW program and installer?

I am unsure of the best location to the above type of support files. I would like the files to be available to all users accounts. If I place them into something like c:\LabVIEW support files this can create an issue if manual changes are made to any of these files by a user without administrative rights. I can also place them into public documents. Any recomendations?
Related. I have added a PDF "help" file to the project. and given a path in the VI properties documentation field. I have then added a custom runtime menu with "Help for This VI". Running the application on my development machine, it works just fine. Making this in an application installed on a test machine, results in the application crashing. The PDF file is in the correct location on the target machine. Any ideas?

It seems you want to put the files where just any user can't get to them to edit them. Unfortunately, if the user account can't get to them, I don't think LV will be able to get to them. I could be wrong. To test this out, use a target location somewhere under your user account folder and then have another user try to run the app. if LV finds them then that gives you more options. If not, then you are going to have to have a common location that users are not likely to go to.
I generally create a dedicated folder structure for LV apps on a target system as shown below. I also make this the My Documents folder so that the LabView Data folder is created under this structure. Yea, it means that users can get to the files but that's where training needs to be executed. If you are in a network environment, you can place the templates, config (ini) files, etc on a network location and users are a bit less likely to inadvertently navigate to them.
I use both for some apps, Local folders for system specific files and Common folders on the network for files that all systems will share.
Not sure if this will address your location issues but thought I would share it nonetheless.
Doug
"My only wish is that I am capable of learning each and every day until my last breath."

How to open the target location in the same window using tomahawk menu

Am using apache tomahawk menu component.
We have a mix of locations that are internal path and also external URL. However, we need to open the location in the same window.
We are using the
<t:jscookMenu layout="hbr" theme="ThemeIE" >
<t:navigationMenuItem id="nmi1" itemLabel="Menu1" action="welcome" />
<t:navigationMenuItem id="nmi1_1" itemLabel="Menu11" action="http://www.google.com/" target="_self" />
</t:jscookMenu>
The component open the external URL in a new window irrespective of the target location. Is there a way to override this behavior.
-Thanks

Check that there isn't a <BASE> element in the HEAD element.

Implementing Dynamic Target Locations

I want to change the Target Location dynamically as it moves through the ETL process.
My Directory structure is
\in - new flat files are pushed into this directory for processing
\staging new flat files are picked and moved to this directory for processing
\staged the processed files are moved to this directory
\error errored files moved to this directory for further investigation
The moment the files are pushed into the \in directory, the ETL/OWF process will be called.
The ETL process will move the files into \staging directory and OWB mappings are called to do the staging process.
Once the staging process is done, the files are moved to \staged directory.
If there are errors in the files
will be moved to /error directory.
Is this possible to accomplish this using OWB/OWF ?
I am using OWB 9.2.0.2.8 and OWF 2.6.1.5.2.
Thanks

Any Help gratly appreciated.. Please throw some light !!
Thanks
Shree

Error RTC-5346 in registering target location in OWB Deployment manager.

Hello!
Dear experts, I've got DB 10GR2 and I downloaded OWB 10.1. I've installed OWB successfully and began to look through the samples. And during my trying to register a target location (when I looked through the sample "Deploying targets") Ive got an error : RTC-5346 :the oracle database location 10.1 is not equal to target version 10.2. As I mentioned before, my DBs version is 10.2 and OWBs version is 10.1. May be it is the matter?
So, what would you suggest me in such a situation? Do I have to fulfill any patches or something like that?
Thanks in advance,
Alexey.

Detlef,
your right. Apparently, the information I got only applied to OWB 10g versions 10.1.0.2.0 and 10.1.0.3.0 which are not certified against an DB 10g R2, because of BUG 4537766...
For 10.1.0.4.0 there is indeed no problem.
Grtz.
Philip.
Message was edited by:
[email protected]
Message was edited by:
[email protected]

RPE-01011 target location incompatible / repository and target are same 11g

I got systematically error RPE-01011 signaling my target location is incompatible. My repository and my target are the same instance and i didn't change anything in the settings. The instance is an 11g database. I don't understand what the problem is. All scripts are execting correctly when i install then manually.

I am having the same problem trying to deploy objects created as per Oracle by Example: Oracle Warehouse Builder 11g. The database version is 11g Release 11.1.0.6.0 and all locations have 11.1 version. This is the second time I am running this tutorial, this time I modified the setup scripts to replace 10.2 by 11.1 but after rerunning all previous tutorials I got the same error.

TS1292 Good morning I received a 25$ itunes card as a gift yesterday, I know it was bought in the target located in 10880 Olson Dr on friday November 30th, but it says that the card has not been activated, currently I dont have the receipt can you please

Good morning I received a 25$ itunes card as a gift yesterday, I know it was bought in the target located in 10880 Olson Dr on friday November 30th, but it says that the card has not been activated, currently I dont have the receipt can you please help me

Normally what you should do is go back the retailer from whom you purchased the card and discuss the problem with them. They should either correctly activate the card or give you a new one. Since you have no receipt, though, it's unlikely that Target will help you, so go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store.
Please note that everyone here is just a felllow user, so you should post no personal information as it will quickly become public.
Regards.

Zipping multple files and sending the Zipped folder to target location using Biztalk

Hi all,
I have requirement like
Seperate Xml files will be coming as incoming message to Biztalk
Biztalk need to send a zipped folder contining all these xml to target location
any link or component i can use to meet this requiremant plese help
regards,
Vineeth

Create or use the publicly available custom component for unzipping the received message and for send use another component to replace all attachments of a multi-part message
(multiple parts to multiple files to zip) for its zipped equivalent. If not multiple message use any zipping API to zip the multiple
files to zip file and send the zipped file in send port.
BizTalk Pipeline Custom Component Message Unzippper
Zip Files in a Custom Pipeline Component
Multi-Part Message Attachments Zipper Pipeline Component
BizTalk Multipart Message Attachments Zipper is a pipeline component
List of custom Pipeline component you can use
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to change the update servers target location?

Hi i just bought a used MacBook from a friend i have been having a problem when trying to use the software update. when i click on software update it says it can not connect to the update server and that i should use network diagnostics. when i click on it it says network seems to be fine but on the left side it shows a red light where server is and says failed i click on run diagnostics and it says "network diagnostics was able to connect to the internet but not to the server "(not showing the server for privacy reasons)" This could be caused by problems with the server, or an internet problem between this computer and the server."
The server name which i did not list was my friends old job server. i just want to know how to change the update servers target location so it will stop trying to connect to his jobs server so it will allow me to update my software from my home wifi thanks

Your friend has configured this computer in some way to prevent a user from accessing Apple's update servers. This was probably done for security purposes. You might check if the firewall has been activated - Open the Security preferences, click on the Firewall tab. If the firewall is turned on, then turn it off. This should fix the problem.
However, if your friend has made other modifications, then you will need to ask him/her what you will need to do to remove them.

Target location vs control center

Hi,
We installed OWB10gR2. In R2 we have control Center Manager to deploy the objects. We can create different control centers in connection explorer. In project explorer configuration we can set which control center is deafult one. Up to that we did. Here my problem is we have one target location. We want to register this target location with different control centers. How it is possible? I mean same location should be available in different schemas. Is it possibles? What is I know is once we register one location with one schema we can't register with another schema right? Or is it possible in R2? Please can you clarify my doubt.
Thanks

Hi,
You question is basically - is it possible to register one single location to more than one control centers ?
I had tried this earlier, but could not succeed as the schema name and password fields are grayed out once the location is registered with a control center.
Best possible way is ( the thing we do ) , create mulitple locations for deploying the same code to multiple locations. Configure the module to the location under the Project Configuration, and thats it.
Regards
-AP

All objects disappear from target location in the Control Center

Hi,
I don't know if this is an OWB bug or if there's some issue with my particular installation, but sometimes when I open Control Center to deploy/run objects they are not there, the particular location (target location in this case) appears empty.
I had seen this a couple of times before but thought that it might be some mistake on my part (selecting the wrong location, db connectivity, etc).
Have you seen this? I'm using OWB 10g Rel 2 with Oracle DB 10g Rel 2.
Regards,
--oswaldo
[osantos]

There is nothing in place. How is turning off location services saving you power? It doesn't use any unless you are using it. However, if you feel strong about it, you can make a suggestion to Apple feedback HERE and click on the appropriate link.

Make MC look at a targeted location

So far from a previous post i created a MC that goes to a targeted location with this AS:
import mx.transitions.Tween;
this.onMouseDown = function() {
    t1 = new Tween(mc, "_x", mx.transitions.easing.None.easeNone,
                   mc._x, this._xmouse, 1, true);
    t2 = new Tween(mc, "_y", mx.transitions.easing.None.easeNone,
                   mc._y, this._ymouse, 1, true);
    t1.onMotionFinished = function() {
        // use mc.swapDepths() is mc is not at a removeable depth
        mc.swapDepths(0);
        _root.mc.gotoAndPlay("destroy");
how to make it also to look at this location, not to stay static?

import mx.transitions.Tween;
this.onMouseDown = function() {
    t1 = new Tween(mc, "_x", mx.transitions.easing.None.easeNone,
                   mc._x, this._xmouse, 1, true);
    t2 = new Tween(mc, "_y", mx.transitions.easing.None.easeNone,
                   mc._y, this._ymouse, 1, true);
// you'll need to define c, a constant, that depends on your ref point
t3 = new Tween(mc, "_rotation", mx.transitions.easing.None.easeNone, mc._rotation,c+180*Math.atan2(mc._y-_ymouse,mc._x-_xmouse)/Math.PI, 1, true);
    t1.onMotionFinished = function() {
        // use mc.swapDepths() is mc is not at a removeable depth
        mc.swapDepths(0);
        _root.mc.gotoAndPlay("destroy");
how to make it also to look at this location, not to stay static?

Target location

Similar Messages

Maybe you are looking for