Targeting Dynamically Attached MC's (2-3 Levels Deep) From Root????

I am in the process of building an application where all of
the functions will be eventually exported into seperate AS files. I
am having issues with a Sub Navigation that is attached and managed
dynamically.
The Sub Navigation is in an MC which contains a mask (which
has a tween animation to add a fade in effect), and a blank MC
which will contain all of the navigation items.
Upon load of an XML file, the navigation items are extracted
and buttons are created within the blank MC. Each button is
inserted using the blank MC instance name at the next highest
depth.
All of the actions associated with the above need to be
issued from the root timeline but when I call the dynamically
attached clips (full target path) it cannot seem to find the clips.
I have checked the target path numerous times and used a variety of
debugging techniques but no luck.
Has anyone else had issued targeting dynamically attached
MC's that are nested two - three levels deep?
Thank you so much in advance!

Here is what is being returned by the output when the Sub
Navigation is displayed:
Level #0:
Variable _level0.$version = "MAC 8,0,22,0"
Variable _level0.NAV_Active = false
Variable _level0.NAV_ActiveButton = 0
Variable _level0.NAV_MaximumButtons = 7
Variable _level0.NAV_EaseSpeed = 1.5
Variable _level0.Navigation_ActiveButton = 0
Variable _level0.SubNavigation_XML =
"_xml/DestinationDetails.xml"
Variable _level0.SubNavigation_ItemCount = 0
Variable _level0.SubNavigation_ItemsXPositioning = 10
Variable _level0.SubNavigation_ItemsYPositioning = 12
Movie Clip: Target="_level0.instance1"
Movie Clip: Target="_level0.instance2"
Movie Clip: Target="_level0.instance3"
Movie Clip: Target="_level0.instance4"
Movie Clip: Target="_level0.instance5"
Movie Clip: Target="_level0.instance6"
Movie Clip: Target="_level0.NAV_Master"
Movie Clip: Target="_level0.NAV_Master.instance7"
Movie Clip: Target="_level0.NAV_Master.SNAV_Master"
Movie Clip: Target="_level0.NAV_Master.SNAV_Master.instance8"
Movie Clip:
Target="_level0.NAV_Master.SNAV_Master.Button_Container"
Movie Clip: Target="_level0.NAV_Master.SNAV_Master.instance9"
Movie Clip:
Target="_level0.NAV_Master.SNAV_Master.Scroll_Down"
Movie Clip:
Target="_level0.NAV_Master.SNAV_Master.Scroll_Down.States"
Movie Clip:
Target="_level0.NAV_Master.SNAV_Master.Scroll_Down.States.instance10"
Movie Clip:
Target="_level0.NAV_Master.SNAV_Master.Scroll_Down.instance11"
Movie Clip: Target="_level0.NAV_Master.SNAV_Master.Scroll_Up"
Variable _level0.NAV_Master.SNAV_Master.Scroll_Up.onRollOver
= [function 'onRollOver']
Movie Clip:
Target="_level0.NAV_Master.SNAV_Master.Scroll_Up.States"
Movie Clip:
Target="_level0.NAV_Master.SNAV_Master.Scroll_Up.States.instance12"
Movie Clip:
Target="_level0.NAV_Master.SNAV_Master.Scroll_Up.instance13"
Movie Clip: Target="_level0.NAV_Master.PNB_6"
Variable _level0.NAV_Master.PNB_6.onRollOver = [function
'onRollOver']
Variable _level0.NAV_Master.PNB_6.onRollOut = [function
'onRollOut']
Variable _level0.NAV_Master.PNB_6.onRelease = [function
'onRelease']
Movie Clip: Target="_level0.NAV_Master.PNB_6.PNBS_6"
Movie Clip: Target="_level0.NAV_Master.PNB_5"
Variable _level0.NAV_Master.PNB_5.onRollOver = [function
'onRollOver']
Variable _level0.NAV_Master.PNB_5.onRollOut = [function
'onRollOut']
Variable _level0.NAV_Master.PNB_5.onRelease = [function
'onRelease']
Movie Clip: Target="_level0.NAV_Master.PNB_5.PNBS_5"
Movie Clip: Target="_level0.NAV_Master.PNB_4"
Variable _level0.NAV_Master.PNB_4.onRollOver = [function
'onRollOver']
Variable _level0.NAV_Master.PNB_4.onRollOut = [function
'onRollOut']
Variable _level0.NAV_Master.PNB_4.onRelease = [function
'onRelease']
Movie Clip: Target="_level0.NAV_Master.PNB_4.PNBS_4"
Movie Clip: Target="_level0.NAV_Master.PNB_3"
Variable _level0.NAV_Master.PNB_3.onRollOver = [function
'onRollOver']
Variable _level0.NAV_Master.PNB_3.onRollOut = [function
'onRollOut']
Variable _level0.NAV_Master.PNB_3.onRelease = [function
'onRelease']
Movie Clip: Target="_level0.NAV_Master.PNB_3.PNBS_3"
Movie Clip: Target="_level0.NAV_Master.PNB_2"
Variable _level0.NAV_Master.PNB_2.onRollOver = [function
'onRollOver']
Variable _level0.NAV_Master.PNB_2.onRollOut = [function
'onRollOut']
Variable _level0.NAV_Master.PNB_2.onRelease = [function
'onRelease']
Movie Clip: Target="_level0.NAV_Master.PNB_2.PNBS_2"
Movie Clip: Target="_level0.NAV_Master.PNB_1"
Variable _level0.NAV_Master.PNB_1.onRollOver = [function
'onRollOver']
Variable _level0.NAV_Master.PNB_1.onRollOut = [function
'onRollOut']
Variable _level0.NAV_Master.PNB_1.onRelease = [function
'onRelease']
Movie Clip: Target="_level0.NAV_Master.PNB_1.PNBS_1"
Movie Clip: Target="_level0.NAV_Master.PNB_0"
Variable _level0.NAV_Master.PNB_0.onRollOver = [function
'onRollOver']
Variable _level0.NAV_Master.PNB_0.onRollOut = [function
'onRollOut']
Variable _level0.NAV_Master.PNB_0.onRelease = [function
'onRelease']
Movie Clip: Target="_level0.NAV_Master.PNB_0.PNBS_0"

Similar Messages

  • How to display dynamic values in poplist at row level in advanced table

    I want to display dynamic values in poplist at row level based on a row value in advanced table, with lov i can achieve it, is there any way to achieve this in poplist
    Thanks
    Bbau

    Babu,
    You have been long enough in forum and still come out with these one liners. Problem statement is not clear.
    --Shiv                                                                                                                                                                                                                                                               

  • How to Attach Customer at Top Task Level?

    How to Attach Customer at Top Task Level?

    Hi
    If you are on Projects FP-M, you should see the setup.
    Using Forms
    Open the form - Projects, Templates and enter the project number.
    Go to Options > Billing information > Billing setup.
    Look for the left uper section called Revenue and Billing Information.
    First lise is Revenue Accrual Method
    Second line is Invoice Method
    Third line is a check box - Customer at Top Task
    Fourth line is a check box - Invoice Method as Top Task
    If you don't see those fields, you may be not on the right version of the system.
    Dina

  • Forms 6i: Dynamically attach/detach LOV

    Hi,
    Is there a way to dynamically attach or detach an LOV to an item at run-time?
    Thanks.

    Yes. you are right. I thought about set the lov_name to null but
    I only looked the help says
    "LOV_NAME Specify the VARCHAR2 name of an LOV to be associated with the given item. If the LOV name does not exist, you will get an error message. "
    but did not do my own test.
    Hedy

  • Target value in MIC. Error if result deviates from this

    Dear friends,
    I want to give only target value in MIC. When results recording deviates from this value then system should give error in valuation field. Is it possible?
    Regards
    Prashant Atri

    Hi,
    In SPRO >quality management> Basic setting-->Maintain setting at plant level
    Here select your plant click on detail.
    Then in next screen  in result record tab you have option Recording confugaration where ou can select autamatic close so in this case if result deviate then system will show you pop up window with default rejected radio button on but again here you can clicjk accepetd and valuate.
    Or check with other option close,nevigate, save autamatically.
    check and revert back.
    regards
    SANI>L

  • If you create a 3 level deep site heirarchy (with the first two levels based on the document centre template) the sharepoint OOTB breadcrumbs break

    if you create a site collection with document center as the template, then create another document center site (as a subsite) underneath it. Then create a team site (as a subsite) in this document center site. So now you have a 3 level deep site heiarchy
    with 2 levels of doc center followed by a teamsite.
    Note that the breadcrumb (when I say breadcrumb I mean the drop down folder button which shows the heirachy) shown on the teamsite skips the middle level doc center.
    I have replicated this bug in production and in my test server.  Has anyone run into this before?  This must be something peculiar with the Doc Center template.  If I do the same thing but I make the middle level a team site I do NOT have
    this problem
    krd

    Hi,
    Per my test, it seems that if the second level uses a different category template except the Collaboration templates, the site will not show on the breadcrumb.
    No matter if the first level uses any template, when we view the subsite which uses the Collaboration templates, all the subsites which uses a different category template above will not show in the breadcrumb.
    You can create your own breadcrumb using code.
    http://blog.mastykarz.nl/building-breadcrumbs-sharepoint-2010/
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Can I install Aperture on an Iomega hard drive attached to my IMac and use it from there with iPhoto pix on the IMaac

    Can  I install Aperture on an external Ilmega hard drive attached to my IMac and run Aperture from there to use it with photos on my IMac iPhoto library?

    It's usually best to have applications on the boot drive, so I'd turn your idea around: run Aperture from the internal disk and park iPhoto and maybe iTunes libraries on an external - which would free up space on the internal.

  • Dashboards - More than one level deep

    Is there a way to create a Dashboards more than one-level deep. Currently I can put a Dashboard within another Dashboard (Getting the flyout menu when I select the top-level dashboard in the Interface). However, what if I want to go one level deeper? So have Dashboard Header show as the link, a flyout menu with Dashboard 1, then another flyout menu off of Dashboard 1 having the link for Dashboard 2.
    I saw this tag DashboardMaxBeforeMenu but don't know if this resolves the issue above as I tried to implement and still was not able to set up the above scenario.
    Thanks.

    Hi Mike,
    Sorry for the delay. The whole team has been busy with JavaONE for the past week.
    We currently do not support reverse engineering of an operation to a sequence diagram more than one level deep. I opened an enhancement request for you:
    http://www.netbeans.org/issues/show_bug.cgi?id=103780
    The UML pack is now part of NetBeans. Check out these links for the latest info regarding UML:
    http://www.netbeans.org/products/uml/
    http://uml.netbeans.org/
    Thanks,
    George

  • Problem with auto forward in nested groups of 3-levels deep (Struts/UIX)

    Hi all,
    In my time registration applications I use master-detail relations of 3 levels deep: Weeks - Days - Hours.
    For user convenience I forward directly from the Weeks table page to the DaysHours master-detail page, skipping the Weeks detail page.
    Therefore I replaced the forward-on-success-path to the WeeksPage with the WeeksDaysRouter, as if the user selected it manually in the WeeksPage.
    This works well, including getting the propper dataobjects and dataobjectsets of all levels.
    However when I browse to the next Day in the DaysHours master-detail page using the '>'-button, the server responds with the next week in a WeeksPage.
    It seems that the application turns into another state when a user action is simulated in the struts config.
    It is unclear to me how to configure the controller to exactly simulate the user action. Who else is in control here? According to MVC I would not expect controlling behaviour in the UIX views.
    Can somebody help?
    kind regards,
         Martijn

    Martijn,
    In formPage.uit, the template used by your page that includes the brow2sebuttons, you can find the following line:
    <formValue name="targetGroup" data:value="jhsPreviousForward@jheadstart:sessionData"/>
    The problem is that jhsPreviousForward still points to the weeks group. You can do two things to solve this:
    1. put a custom Struts action in between that changes the value of jhsPreviousForward to "DaysHours" (assuming that is the name of your group.
    The code to do this in your Struts action:
    sessionData.setAttribute(JHS_PREVIOUS_FORWARD,"DaysHours",SessionData.SESSION_SCOPE);
    See chapter 2 of the Dev Guide for more info on writing custom Struts actions.
    2. Make a copy of formPage.uit, rename it and change the targetGroup formValue to
    <formValue name="targetGroup" value="DaysHours"/>
    and have your page use your custom template instead of formPage.uit.
    I would favor the first option, you could even make this action generic by passing in the targetGroup name using set-property in the struts-config, rather than hardcoding it in the action.
    Steven Davelaar,
    JHeadstart Team.

  • Reverse engineering sequence diagram with more than one level deep

    Hello,
    When I generate sequence diagram from a method with Java Studio Enterprise 8.1, it only shows the method called directly by this method.
    Can I also show the methods that are called by the other methods that the one I'm generating the diagram from?
    Thanks,
    Mike

    Hi Mike,
    Sorry for the delay. The whole team has been busy with JavaONE for the past week.
    We currently do not support reverse engineering of an operation to a sequence diagram more than one level deep. I opened an enhancement request for you:
    http://www.netbeans.org/issues/show_bug.cgi?id=103780
    The UML pack is now part of NetBeans. Check out these links for the latest info regarding UML:
    http://www.netbeans.org/products/uml/
    http://uml.netbeans.org/
    Thanks,
    George

  • Document level scripting from process workflow

    Hi all,
    is there some way to add a "document level" script from process workflow in Livecycle Workbench?
    That is, I have a script i want to add to a pdf in my process workflow. How can I do that? Is there some service/function/script I can use to do that?
    I'd really appreciate any help.
    Thanks
    Alessio

    Not that I am aware of, could be wrong though

  • Replication of hierarchical levels labels from ECC to SRM

    Hi Gurus!
    I am working on SRM 5.0 in Classic scenario and ECC 6.
    We are trying to replicate data from ECC to SRM in order to retrieve the same organisational structure as the one existing in ECC in SRM.
    We succeed in replicating hierarchical levels from ECC to SRM, indeed we retrieve data of infotype 0001 employee subgroup in table HRP5581-PERSK. But we did not retrieve labels of those subgroups?
    Have we missed to customize a filter in tx BD64 in ECC? Or the problem is just that data replication does not send hierarchical levels labels from ECC to SRM?
    Please help!!
    Thanks a lot.
    Regards,
    Morgane Chevallier

    Hello all!!
    Any idea on the subject??
    Please help!
    Regards,
    morgane

  • Can I restore SAP GUI patch level 5 from Patch level 7

    Hi,
    I updated SAP GUI 710 from patch level 5 to level 7, is it possible to revert this change to patch level 5 again, as our business requirement is only patch level 5.
    How to restore it back?
    Also, what changes made by SAP in patch level 7 from 5, 3 etc?
    Thanks

    Hi Martin
    Thanks for answering my queries.
    Reason for going back to patch 5 is to maintain all client of production system at one level.
    Certainly using higer patch level will also includes all functionalities of lower level.
    But, did someone try to load patch 5 on patch 7, does it work?
    Becoz, I am in production, so not in very good position to take this risk.
    What you ppl say?
    There should be some way to restore your GUI to back date, is it!, like one we do to restore our windows machine.

  • Analyse big data in Excel? Why the dynamic tables doesn't take all the data from the source table.

    Hi,
    I'm doing a internship in a production line.
    My job is to recover production data (input data) and test data (output data) using various types of software (excel, BusinessObject sap, etc).
    To this day, I have recovered hundreds of production data, and have also organized in excel but I need to analyze and plot them.
    I would like to know who can give me an idea of ​​how I could plot as much data and analysis.
    Now i trying to use dynamic charts and plot some data but I did not get acceptable answers.
    How could I compare, analyze and graph for example:
    Five columns of production (input) with five (5) columns tested (data output).
    After graphing.
    Someone can give me a technique to analyze data? ie I compare column by column?
    or some other technique? as a conglomerate could analyze data?
    o give you an idea of ​​the contect, now I perform an internship in a manufacturing turbines.
    My job is to analyze the input data (production) and to estimate the possible behavior of the turbines in the tests.
    As I said, use dynamic tables in excel, but i have not idea why the dynamic tables doesn't  take all the data from the source table.
    I appreciate your advice
    Thanks

    You can declare as PT source whole Columns [$A:$E], without rows number.
    Then You'll have all actually data.
    Oskar Shon, Office System MVP - www.VBATools.pl
    if Helpful; Answer when a problem solved

  • Patch level rise from 7.6.04.10 to 7.6.04 Build 16 with 2 maxdbs in group

    Dear Gentlemans,
    We plan a patch level rise from 7.6.04.10 to 7.6.04 Build 16
    But on host 2 maxdbs running in same group (and 2 saps).
    Do we need to stop both of them during the patch?
    Thanks in advance!
    Tibor Meszaros

    Hi Tibor,
    > We plan a patch level rise from 7.6.04.10 to 7.6.04 Build 16
    > But on host 2 maxdbs running in same group (and 2 saps).
    >
    > Do we need to stop both of them during the patch?
    you need to stop both of them until the independend software is updated.
    After that you may restart the other system.
    Anyhow, you really shouldn't install 7.6.04 patches anymore - if you're not running livecache or OneDB, then always take the current patch. At the moment the current patch is MaxDB 7.6.05 Build 12.
    regards,
    Lars

Maybe you are looking for