Technical setting

Hello Friends
Can you help me for la difference entre
- Display Maintenance Allowed with Restrictions
- Display Maintenance Allowed
- Display Maintenance Not Allowed
Merci .

display maintainence not allowed mean that you cannot maintain the entries in the table manually
display maintainence allowed means that you can maintain the entries in the table manually in SM30 by creating TABLE maintainence generator
Display/maintenance allowed with restrictions means
Usage of standard table maintenance tools is allowed to a limited
extent:
-   Transaction SE16 allows the display function for this Dictionary
    object, but no maintenance.
-   Generation of a maintenance dialog for this Dictionary object is
    possible using transaction SE54.
-   Transaction SM30 does not allow maintenance and display
    functions for this Dictionary object
    Note: The generated dialog can be included in view clusters
    (data maintenance through transaction SM34) or called within a
    program through the function module View_Maintenance_Call.
Edited by: Sravan Kumar on May 7, 2009 12:31 PM

Similar Messages

Regarding Technical Setting of Tables.

Hey Hi Experts,
I have following issues within my implementation project.
1. On the PRD server the data is huge when i see Transaction tables like VEPO or LIPS I see that the size Category specified ( in my case vepo is set for Catagor 4 ie 81,000 to 320,000 records but it far exceeds the limits current is 6 lacks ) in the technical setting is very low as compared to the data size in them ( Will that matter my Reports performance )
2. There is a radio button goup where its set to "NO Buffring allowed " (Caution ..!)
I need you suggession for the following do i need to adjust the technical setting of the tables if my data size is exceding the limit specified record count .
If ineed to set it What type of buffring will i choose.
Plz experts...:)

1) When you activate a table for the first time the system needs to know how much space it needs to reserve for your table. Your definition tells the system the maximum size in bytes for each record. All the system needs to know is how many records (a ball park figure) your table is likely to have. This is what you enter in the size (category). This does not mean that your table cannot exceed that size. When your table is about the exceed the specified size the system needs to allocate more space. How does it know how much space it needs to allocate? Again it looks at this technical setting value. In short the category indicates to the system the amount of disc space to allocate/reallocate your table.
Will this effect your query speed? No.
2) Buffering determines how many records are transferred from the database to the memory. If you use full buffering any query to the table will cause all the records in the table to be transferred into your buffer. This setting is acceptable for smaller tables. You would not want to do this with larger tables because you will not have enough space in the memory to read all the data. The partial buffering transfers all the records that qualify by part of the primary key. For example if you are reading VBAP (Sales Order Line table), if you repair the table to have partial buffering and you read one sales order (VBELN) the system automatically transfers all the data of all the lines (POSNR) of the sales order from the database to the buffer.
Buffering helps improve performance but careful thought needs to be put into this and besides it is not advisable to repair any SAP tables.
The best solution for large tables is archiving. The SAP R/3 system should not be used to view reports on historic data. We have the BW system for that. The BW system is designed to be flexible with data and can quickly give you the historical reports you desire. It is a best practice to archive large tables every 2 years and use the BW system for the historical data analysis.

SPDD - Technical setting issue on BNKA table

Hi All,
We are in the process of 4.7 to ECC 6.0 upgrade.
Please see the SPDD screen shot
http://docs.google.com/Doc?id=dctrtng5_0dqxqcw
In this what can we do with the issue related to BNKA table. It shows it is a warning with Technical setting.
I have verified with source system version of BNKA table technical settings with the upgrade shadow system BNKA table technical settings . I dont find any difference .
Please let me know what can i do .
Regards,
Reddy

Hi ,
Thanks for reply.
Please find the technical settings in my system
Data class APPL0 Master data, transparent tables
Size category 2 Data records expected: 8.000 to 32.000
and buffering not allowed
I checked both systems- sanpit system and the shadow system verified is there any changes in technical settings ... I dont find any changes in this ...
But in the screenshot of SPDD it is showing as warning under without modification adjustments.
If it is a warning can we ignore this and can add this to transport . or what is suggested ..
I dont find any difference in both technical settings ... give me some idea..
Cheers,
Reddy

Download the lock object's technical setting on loack machine

Dear Experts,
I want to download lock object's technical setting on loack machine.when i give on selection screen name of local objects and desire path.it save on given path.
Please give me example for it.
Thanks & regard,
jaten

Also, when reviewing the Plumtree_.NET_Web_Controls_InstallLog.log there were 5 nonfatal erros. These error's were:
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll (The process cannot access the file because it is being used by another process)
When installing the Web Control's do you need to stop any services? I didn't see anything in the install notes about doing this?

Technical setting related Query?

Hi Friends
In MM-Xi-SUS scenario, do we need to define logical systems,RFC destination, backend systems, def Port for all three systems in all three systems. Do we need to loginto their own server and client and perform these settings
Regards
Emil

Hi
Yes you need to perfrom these in ECC and SRM (SUS client) individually
Rgds/ Kiran

SAPRouter set up in Solman 7.1 sr1 release

Dear All,
we completed the installation Of Solman Server 7.1. Now we are in the process of activity "Configuration Of SOlman Server ".
RFC Destination SAP OSS not working. Connection and Authorization test for SAPOSS is failing with "Connection Error "
Connection test of RFC Destination ( SAPOSS) is failing with below error:
Logon Connection Error
Error Details Error when opening an RFC connection (LB: Hostname or service of the message ser
Error Details ERROR: partner '147.204.2.5:sapdp99' not reached
Error Details LOCATION: SAP-Server solmantrg_SMI_01 on host solmantrg (wp 2)
Error Details DETAIL: NiPConnect2: 147.204.2.5:3299
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 27
Error Details ERROR NUMBER: 79
Error Details ERROR TEXT: Connection refused
Error Details MODULE: nixxi.cpp
Error Details LINE: 3286
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 720
Error Details TIME: Fri Apr 25 13:04:19 2014
Error Details VERSION: 40
Authorization Test Of RFC Destination ( SAPOSS) IS FAILING WITH below error
Logon Connection Error
Error Details Error when opening an RFC connection (LB: Hostname or service of the message ser
Error Details ERROR: partner '147.204.2.5:sapdp99' not reached
Error Details LOCATION: SAP-Server solmantrg_SMI_01 on host solmantrg (wp 2)
Error Details DETAIL: NiPConnect2: 147.204.2.5:3299
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 34
Error Details ERROR NUMBER: 79
Error Details ERROR TEXT: Connection refused
Error Details MODULE: nixxi.cpp
Error Details LINE: 3286
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 720
Error Details TIME: Fri Apr 25 13:05:37 2014
Error Details VERSION: 40
In OSS1, parameter of the technical setting is attached. Please check attached screenshot for more details on the error
Please tel how to maintain OSS1 details and help to fix the RFC error of destination SAPOSS
Regards,
Gayathri.K

Gayathri,
Is your SAProuter installed on the same server as Solution Manager, or on another server? Since you said this was all working before when you were using SolMan 4.0, you must have already had a saprouter registered with SAP. Do you still have that SolMan 4.0 system? Or did you wipe it out before doing the fresh install of SolMan 7.1?
The SAProuter will have two IP addresses: an 'external' one that you have registered with SAP, and an 'internal' one that is on your company's private network. That internal IP address needs to be set up in OSS1 technical settings as the address of your "SAProuter at Customer Site". In your screenshot, you had these fields blank, and as Shkelzen pointed out, this isn't going to work until you fill that in:
Regards,
Matt

Set-up clarification worklist fr payment lot

Dear reader
We would like to use a workflow for the clarification worklist for payment lots in an ISU 472 system.
The aim for us is to post clarification items in different inboxes depending on the BP type of the BP.
We already checked the documentation, in customizing, on help.sap.com and on OSS but the still cant make it work.
- We tried to customise IMG<Financial Accounting<Technical setting<Prepare processing for Clarification worklist, but do not know how to because of a lack of documentation. Is there any additional information available?
- we tried to activate BOR in this transaction
- we tried to assign an event (object Type: CFC_OBJAP, Event: CLARIFIED) in this transaction and linked the events to copies of the workflows which are available for this functionality (WS21000077, WS21000078)
-we tried to trace the events when posting a payment lot which creates clarification cases, but didnt find any.
We tried a lot, but none of these has lead to results.
Could anyone provide more information or some tips on how to configure Prepare processing for clarification worklist or on how to activatre the workflows (WS21000077, WS21000078) to help us out?
Thanks
Best regards,
Gerd
SPE(Luminus) - Belgium
PS: we're working on R3 version 47 and ISU version 472

Haven't anybody had similar problem? I have to do it now but there is no info anywhere.
I have to notify the clerk (by SAP Inbox), that there is payment clarification case assigned to him. Workflow template WS21000078 seems to be that what we need. Even in SAP help there are info that it could be used in this purpose. Unfortunately there is no help how to do it.
So far I thought I can create custom copy of business object type CFC_PAYLOT with event CREATE but I donu2019t know when and how I can call this event. I think it should be called when there are new cases added to table DFKKCFZST. Do you think itu2019s possible?
Best regards
Jarek

Technical Systems in Managed System Configuration greyed .

Hi,
I upgraded ST-SER to 701_2010_1 SP0 and in the process of upgrading
this tool I had to also patch other components like ABAP,BASIS etc as
pre-requisites for this.
As this involved all the components to be patched, I
executed the initial,Basic configuration in solman_setup and everything
is fine.
In Initial I executed only the read SLD and skipped the other steps as
the other steps have been already executed after install of solution
manager .
In Basic Configuration I have executed all steps and everything has
executed successfully.
The problem is in Managed system configuration.
I have the Wily Introscope Manager Console showing all the statistics
of Agents and all Agents are attached.
The problem I see is first thing is the technical setting in the
Managed system diagnostics are greyed why is it ?
Second is when I execute the Managed system Diagnostics configuration , the first step Wily host agent fails all other steps are okay.
The error in this step is "No connection to any Wily Enterprise Manager"
Appreciate any advise.
Thanks,
Misba

Hello Diego,
I started getting this error only after I upgraded the tools, even now the Wily is up and running and I can see the dashboard with all the live diagnostics graphs and statistics for ABAP & JAVA. All the steps have executed successfully except this one step. Even trusted RFC's are okay. This was an established system with all configurations.
So I am surprised what I am missing. Can you please explain to me more about how I can see " http://<ip>:<port>/SMD under "managed systems" ->Introscope Agent ".
All Agents are attached and in Agent adminstration I can see all the Agents online.
Thanks,
Misba

SPDD - Technical settings

Hi All,
We are in the process of 4.7 to ECC 6.0 upgrade.
Please see the SPDD screen shot
http://docs.google.com/Doc?id=dctrtng5_0dqxqcw
In this what can we do with the issue related to BNKA table. It shows it is a warning with Technical setting.
I have verified with source system version of BNKA table technical settings with the upgrade shadow system BNKA table technical settings . I dont find any difference .
Please let me know what can i do .
Regards,
Reddy

It seems the changes to technical settings are reverted back but there is an entry in the log which populated this warning message so we went forward with ACT_XXX phase of upgrade.

Persistence Layer Analysis - where to set Maximum Number of tbale entries?

Hi gurus,
I need to increase this value. Can you please let me know where to set it up?
Thank you. Olian

Hi Olian,
Open table SXMSPMAST in se11 and goto technical setting set the value Size Category to 6 or 7 from default value 4 according to ur req.
Thanks!

SM59 Setting?

Dear Experts,
I was trying to download SAP notes thru tcode : SNOTE (Note Assistant) but failed due to the error in remote connection to destination SAPOSS. The error message stated the error when opening an RFC connection, which therefore, I came into this SM59 to do the setting.
I did the connection testing but still failed. I just wonder what is the right setting at the "technical setting" tab.
The current default setting is as follows :-
target system : OSS
msg. server : /H/147.204.2.5/S/sapdp99/H/oss001
group : EWA
Does anyone what went wrong?

There are many ways.
The easiest would be over the useradmin:
http://<your_javaserver>:5xx00/useradmin
Murat

SLD Technical server name

Hi,
I work on CE 7.2 SP03, while configuring SLD in the initial step I entered Object Server Name as "ABC.PQR.XYZ" which is my server name. But when I go and see in the technical setting it shows host name as "ABC" and its not showing full name.
Please suggest.

Hi Patana,
please check this note:
#1172643 -- Error when setting the name of the SLD Object Server
(http://service.sap.com/sap/support/notes/1172643)
...this case, you must also refer to Note 935245. If you do not apply the patch, the valid value range is limited to letters, numbers and "_" (underscore), and the first character must not be a number.
(The note 935245 is under rework right now so you cannot access it, but I believe the above mentioned note answers the question.)
Best Regards,
Ervin

Table without technical settings

Hi everyone,
can anyone tell me how to suppress this message ......Message no. E2173....so i shall activate my table which dont have any technical setting...( i know that we can create the table without technical settings and i want solution)..
Thanks
Edited by: priya patil on Jun 30, 2008 10:13 AM

hi priya,
The technical settings of a table define how the table will be handled when it is created in the database, that is whether the table will be buffered and whether changes to data records of the table will be logged.
The most important parameters are:
Data class: The data class defines the physical area of the database (tablespace) in which the table should be created.
Size category: The size category defines the size of the extents created for the table.
When the table is created in the database, the required information about the memory area to be selected and the extent size is determined from the technical settings.
Buffering permission: The buffering permission defines whether the table may be buffered.
Buffering type: If the table may be buffered, you must define a buffering type (full, single-record, generic). The buffering type defines how many table records are loaded into the buffer when a table entry is accessed.
Logging: This parameter defines whether changes to the table entries should be logged. If logging is switched on, each change to a table record is recorded in a log table.
The Convert to transparent table flag ( transparent flag) is also displayed for pooled tables or for tables which were converted into transparent tables earlier on with this flag.
Now,the point is that table can't be maintained in the database without these above mentioned things.That's why answer to yr question is simple that we can't activate an table without techinacl settings.

BPM Process chain takes long time to process

We have BI7, Netweaver 2004s on Oracle and SUN Solaris
There is a process chain (BPM) which pulls data from the CRM system into BW. The scheduled time to run this chain is 0034 hrs. This chain should ideally complete before / around 0830 Hrs. <b>Now the problem is that every alternate day this chain behaves normally and gets completed well before 0830 hrs but every alternate day this chain fails</b> there are almost 40 chains running daily. Some are event triggered (dependent with each other) or some run in parallel. In this, (BPM) process chain, usually there are 5 requests with 3 Delta and 2 full uploads (Master Data). The delta uploads finishes in 30 minutes without any issues with very few record transfers. The first full upload is from 0034 hrs to approximately 0130 hrs and the 2nd upload is from 0130 hrs to 0230 hrs. Now if the 1st upload gets delayed then the people who are initiating these chains, stop the 2nd full upload and continue it after all the process chains are completed. Now this entire BPM process chain sometimes takes 17 -18 hrs to complete!!!!!
No other loads in CRM or BW when these process chains are running
CRM has background jobs to push IDOCS to BW which run every 2 minutes which runs successfully
Yesterday this chain got completed successfully (well within stipulated time) with over 33,00,000 records transferred but sometimes it has failed to transfer even 12,00,000 records!!
Attaching a zip file, please refer the 21 to 26 Analysis screen shot.doc from the zip file
Within the zip file, attaching Normal timings of daily process chains.xls the name explains it.
Also within the zip file refer BPM Infoprovider and data source screen shot.doc please refer this file as the infopackage (page 2) which was used in the process chain is not displayed later on in page number 6 BUT CHAIN GOT SUCESSFULLY COMPLETED
We have analyzed:--
1)     The PSA data for BPM process chain for past few days
2)     The info providers for BPM process chain for past few days
3)     The ODS entries for BPM process chain for past few days
4)     The point of failure of BPM process chain for past few days
5)     The overall performance of all the process chains for past few days
6)     The number of requests in BW for this process chain
7)     The load on CRM system for past few days when this process chain ran on BW system
As per our analysis, there are couple of things which can be fixed in the BW system:--
1)     The partner agreement (transaction WE20) defined for the partner LS/BP3CLNT475 mentions both message types RSSEND and RSINFO: -- collect IDOCs and pack size = 1 Since the pack size = 1 will generate 1 TRFC call per IDOC, it should be changed to 10 so that less number of TRFCs will be generated thus less overhead for the BW server resulting in the increase in performance
2)     In the definition of destination for the concerned RFC in BW (SM59), the Technical Setting tab says the Load balancing option = No. We are planning to make it Yes
But we believe that though these changes will bring some increase in performance, this is not the root cause of the abnormal behavior of this chain as this chain runs successfully on every alternate day with approximately the same amount of load in it.
I was not able to attach the many screen shots or the info which I had gathered during my analysis. Please advice how do I attach these files
Best Regards,

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

Error While Activating the Table

i have created a table name ZEMPLOY11 in ABAP Dictionary containing fields Client [NUM] Carieer [NUM] Firstname [CHAR] and Surname [CHAR] and save it . when i activated this table it shows and error Mesage "Errors occurred during activation". kindly help me out
i have created few more tables and faceing the same problem
Regards
Ammad

Hi Ammad,
Could you please paste the error what you are getting so that we can help you in a bettre way, I think most probably you haven't assign a key variable while creating the table, so in the screen where you have mentioned the fiels Client NUM Carieer NUM Firstname CHAR and Surname CHAR ,mark client and carrioer as key fields, then try to activate it after setting the technical setting of the table.
Hope now you will able to activate your tables.
Pooja

Technical setting

Similar Messages

Maybe you are looking for