Text Field Label?
I have created a form with expandable fields. I have a couple fields that I want to have text label in but I want the label to disappear when the user types in the field. Is this possible? I found where I can add a label of sorts but it needs to be manually deleted when the user enters text.
Refer to this old thread in which Niall and Bruce had provided some nice samples for a similar question..
http://forums.adobe.com/message/2516823#2516823
Thanks
Srini
Similar Messages
-
Can't hide text field label..only text field
I'm trying to display text field boxes on a form to fill out when a box is checked. I'm able to do this for the actual text field, but can't figure out how to hide then show the associated text field label. Can you tell me what I'm doing wrong?
Thanks!
var nHide =
event.target.isBoxChecked (0) ? display.visible:display,hidden;
this.getField ("Name").display = nHide; this.getFieldFirst of all, you're using Acrobat JavaScript in an XFA form, which doesn't work.
LiveCycle Designer has its own interpretation of JavaScript, which is different to Acrobat.
There is also a second scripting language called FormCalc available.
Its syntax is much easier to learn and is matches perfectly to manipulate XFA forms.
Check the help (F1 button) in Designer to get the Designers scripting guide. -
PCUI - CRM - Text (Field Label) Replacement
Hi Friends,
I want to change the Field Label displayed on the PCUI.
In PCUI the field label displayed, is the value taken from the Medium Text of that field's respective Data Element in DDIC. Please correct me if I am wrong.
Now for example - I want to replace 'Sold-To Party' field label as 'Buyer Site', how can I achieve this without modifying the data element's medium text ?.
I tried using Text Replacement Tool (trans CRMST62), but it reads values from Header, Short text, but not from the medium text. And also it is time consuming as it runs several background job process.
Does PCUI Applications stores field labels in any table ? Or is there any config available by which we can insert field labels in the PCUI Application.
Thanks
HarshHi everybody,
with a little modifcation it works fine.
See below, how I have implemented it.
Cheers,
Marc
<b>Note:</b>
Necessary modification is supposed to causing no problems during upgrade.
<b>Realization:</b>
- Customizing table controls text labels in user interface of CRM application
- Maintenance via customizing view
1. Create customizing table 'ZMAL_DDIC_C'
MANDT type MANDT
TABNAME type TABNAME
FIELDNAME type FIELDNAME
2. Create text table for language dependent text 'ZMAL_DDIC_CT'
MANDT type MANDT
TABNAME type TABNAME
FIELDNAME type FIELDNAME
LANGU type SPRAS
SCR_TEXT_S type SCRTEXT_S
SCR_TEXT_M type SCRTEXT_M
SCR_TEXT_L type SCRTEXT_L
3. Create method 'get_fieldtext()'
Porperties: static and public
Parameters: I_FIELD_LIST importing type DDFIELDS
R_FIELD_LIST returning type DDFIELDS
method get_fieldtext.
DATA: field_itab type ddfields,
ddic_ct_struc type zmal_ddic_ct,
ddic_ct_itab like table of ddic_ct_struc.
FIELD-SYMBOLS: <field_struc> type dfies.
field_itab[] = i_field_list[].
loop at field_itab assigning <field_struc>.
at first entry we look for new lables in our
customizing table
if sy-tabix = 1.
select * from zmal_ddic_ct
into table ddic_ct_itab
where tabname = <field_struc>-tabname
and langu = <field_struc>-langu.
endif.
check if an individual lable exists
read table ddic_ct_itab
into ddic_ct_struc
with key fieldname = <field_struc>-fieldname.
only when text in customizing table is not empty ,
replace standard text
if sy-subrc = 0.
if not ddic_ct_struc-scrtext_s is initial.
<field_struc>-scrtext_s = ddic_ct_struc-scrtext_s.
endif.
if not ddic_ct_struc-scrtext_m is initial.
<field_struc>-scrtext_m = ddic_ct_struc-scrtext_m.
endif.
if not ddic_ct_struc-scrtext_l is initial.
<field_struc>-scrtext_l = ddic_ct_struc-scrtext_l.
endif.
endif.
endloop.
return edited field list
r_field_list[] = field_itab[].
endmethod.
3. Mofification
Class: CL_ABAP_STRUCTDESCR
Method: GET_DDIC_FIELD_LIST()
if sy-subrc <> 0.
fill cache with negative result
cache_wa-langu = p_langu.
cache_wa-not_founf = abap_true.
insert cache_wa into table me->ddfields_cache.
raise not_found.
endif.
START INSERT
p_field_list = <own_class>=>get_field_text( i_field_list = p_field_list).
END INSERT
fill cache
cache_wa-langu = p_langu.
create data cache_wa-value.
cache_wa-value->* = p_field_list.
insert cache_wa into table me->ddfields_cache. -
How to define the same font size,color for a text field label
hi all,
In my project i need to define the same font size & color for all the text field lables in the application.how do we can achieve this?
Thanks & regards,...or you could use declarative components....
Not sure if skinning would prevent developers from overriding a look and feel??? hmmm not sure..
Grant -
How to change the text of label dynamically
Hi all,
I have done a dynpro program.It requires to implement the dynamically display the label text, for example: there is a label, sometimes, we want to display "Purchase Order" and sometimes we want to display "Sales Order". Can anyone tell me how to change the text of label according to my requirements? thanks in advance!Hi Wei,
AS of now you will not be able to change the Text Field ( Label ) dynamically or at runtime. This is a limitation.Refer to this link:
http://help.sap.com/saphelp_nw04/helpdata/en/e4/2adbef449911d1949c0000e8353423/frameset.htm
But, there is a way around.
You can make a text field Visible / Invisible based on your program logic. So, based on what you want, you can process a module which will take care of that.
Have a look at these DEMO Code. You can have a good idea to implement the logic.
DEMO_DYNPRO_MODIFY_SCREEN - Demonstration of Dynamic Screen Modifications
Thanks,
Samantak. -
Check box or radio button to control image opacity and text field. javascript
This is a little over head and skill set so I am reaching out to you fine people.
I am using Adobe acrobat pro x
I have radio buttons now but I can switch to check box if needed.
What I need the Java script to do is...
If Yes is checked then a text field labeled comments appears and an image labeled box changes the opacity to 100%.
If No is checked then it does the opposite. Text field disappears and image goes to 0% opacity.This is the Adobe Reader forum. You are more likely to receive a helpful answer if you ask in the appropriate Acrobat forum (e.g. Acrobat SDK).
-
Standard field label change and drop down
Hello,
I need to change a text field label and create a drop down for a input down field. The problem is that they are standard fields in sap. I am not sure if by code i can do this change. Because I tried doing the change through cmod to change the field text and append for the drop down in the domain, but for some reason it did not work. Any help would greatly appreciated.>
David Rivera wrote:
> Hello,
>
> I need to change a text field label and create a drop down for a input down field. The problem is that they are standard fields in sap. I am not sure if by code i can do this change. Because I tried doing the change through cmod to change the field text and append for the drop down in the domain, but for some reason it did not work. Any help would greatly appreciated.
What is the program?
You can change the field text in CMOD but you cannot do a dropdown in CMOD.
Dropdown is for the screen element and you need to change the screen for this and need to populate the field. Find if there is any user exit for your requirement. -
Is there any reason why only text field labels carry the required "*" asterisk field (and incidentally, the "!" exclamation error on the field", when set to required?
I cannot get my checkboxes and radiobuttons to do it.
I dropped a checkbox, set a label on the checkbox, and set it to required. No asterisk by the label. Also, when no value is given when running the app, the cool "!" exclamation beside the label is not there.
Only on text boxes does this work. Bug?I believe we have a bug filed for this, but it is scheduled to be fixed for a future release. I'll post back shortly once I find the reported CR.
sqad
- Creator Team -
How to pass the text from a table to the field label on the selection scre
hi guru's
i have requirement were in i have to pass the text from a table as field label for
a input field on the selection screen.
EX: selection screen
(xxxxxxx ) __________
field label
please help
regards,
varahi all,
can you please check the code, and suggest am i doing wrong any were.
types: xtab(200).
data : ttab type table of xtab,
w_so type xtab.
data: routine(32) value 'TEMP_ROUTINE',
program(8),
message(128),
line type i.
AT SELECTION-SCREEN OUTPUT.
select field text DATA_ELEMENT from zauthgrptxt into table t_fieldlabel where STARALLOWED EQ c_asteriks.
DESCRIBE TABLE t_fieldlabel LINES N.
w_so = 'REPORT ZTEMP_PROGRAM.'.
append w_so to ttab.
w_so = 'FORM TEMP_ROUTINE.'.
append w_so to ttab.
loop at t_fieldlabel.
w_field = t_fieldlabel-field.
CONCATENATE 'SELECT-OPTIONS: ' ' P_' w_field zspace ' FOR ' ' T_FIELDLABEL-' w_field ' NO INTERVALS NO-EXTENTION.' INTO w_so.
append w_so to ttab.
endloop.
w_so = 'ENDFORM.'.
append w_so to ttab.
generate subroutine pool ttab name program
message message
line line.
if sy-subrc = 0.
perform (routine) in program (program).
else.
write:/ Message.
endif.
The sy-subrc = 4. nothing is coming into 'program' at generate subroutine pool
very urgent requirement please help
thanks,
vara -
Hello everyone. I was wondering if there was a way to make a label viewable in normal mode for a PDF text field form. I am making my PDF a form with a fillable text box in it. Well, I'd like the box name to show up when someone opens the PDF, not just if they only go into the edit form view. I hope I'm making sense. So far, the only thing I can think of is making a Button with the label above the fillable text box or make the text box a combo box. However, with a combo box, I can't edit how the text will look when it's typed in. Right now, though, when a person opens the PDF normally, the highlighted fillable text boxes show up but not the labels with them even though I have names entered in on Name and Tooltip.
Any suggestions?Oh my gosh... I feel like such a dork!! I took a fresh look at it this morning, and the ONLY mistake I had was that I put the ending quotations in the wrong spot! I forgot to include (Optional) inside the quotations for the label!
I had this: if (!event.value) event.value = "Company Information" (Optional);
Instead of this: if (!event.value) event.value = "Company Information (Optional)";
Oi!! That was it! lol! I'm sorry about that. And yes, without those quotations, my text form fields don't work. I hadn't seen your message before (until now) asking for me to clarify that. I'm sorry! That's the only spot I needed quotations. If I don't have them, Adobe tells me that I'm missing characters.
THANK YOU SO MUCH!!! I wish there was a way to give brownie points or something on here either than "Right Answer". You have helped me so much and deserve a lot of brownie points! Thank you!!
If Adobe is reading this, please give George Johnson a reward or something, please! He was very helpful and patient with me. -
How to remove labels from text fields?
Hey Everyone!
I am having troubles with forms in Dreamweaver CC.
I insert a text field in a form but the text field automatically comes with a label.
How do i stop this?And I get that!
But say I insert a text field.
It is preceded by a label saying "Text Field 1:"
But I already have written what the text field is supposed to do!
And when I go in front of the label and press backspace, it doesn't wanna get deleted; not until I have to select the text and delete it!
So you see a large part of my time is getting wasted in formatting the page and i can't give my full attention to the php code I want to write as I get frustrated because of this!
So if you could help me get rid of the labels for good ; it'll be amazing!
Thanks
Regards
Anuj -
Hi There
I am struggling a little with putting a label into three text fields of a form - please see the site at http://www.justadwater.co.uk/Firstlook/index.html I can get it to appear when you click on the text box but it needs to be there from the start and then gone when you click on the box.
Hope someone can help.
Thanks
GHi,
I believe this code should work.
<form action="sendmailnews.php" method="post">
<input name="First Name" id="Firstname" type="text" value="First Name"/>
<input name="Last Name" id="Lastname" type="text" value="Last Name"/>
<input name="Email" id="Email" type="text" value="Email"/>
<input name="" type="image" id="button" src="images/button.gif"/></form>
qazsd -
WDA - customer text in field label in Layout
Hi,
I need to display the customer text in field label in Layout. Currently field label text is coming from OTR.
OTR PAOC_RCF_UI_SELF_SERVICES/MIDDLE_NAME has text Second Name. My customer wants to display Middle Name instead of Second Name.
How can I fulfill my customer requirement without modyfying WD Component?
Regards,
...Naddy
Edited by: Naddy on Apr 4, 2008 2:46 PMHi Naddy,
U can achieve it by enhancing the component , write a post exit for the wdmodifyview
in that .. for first_time get the UI element and set the text as u want.......
Regards
Yash -
Changing Field Labels texts: What happens after Upgrade?
Hi All,
my client would like to change some field label text of domains.
The question I have is, what will happen after change of release? Will the texts be overwritten? And all have to be maintained again?
Will I know which ones have been overwritten (SPAU)?
Any comment, suggestion, experience?
Thanks in advance!
thomasHello,
Guess your question refers to field label texts of datatyps - because domains have only the technical data definition. Anyway - all modifications of Data Dictionary elements ( domains, datatyps, tables) are handled by transaction SPDD during upgrades. The difference to transaction SPAU is, that transaction SPDD is used during the upgrade - after the 'Test'-phase and before the 'Import'-phase.
Have a look on the documentation of SPDD- it's quite good.
Regards Wolfgang -
Text Field avoid tab into label
Is there a way to avoid tabbing into a label.
I have several Text Fields with as "Required with Help" and the user would like to tab thru the Text field without having to tab out of the label.
Is that possible.
Using Apex 3.2.
ThanksThis can be controlled using the HTML <tt>tabindex</tt> attribute. See +{thread:id=1246565}+ for a previous discussion on this.
Basically, <tt>tabindex</tt> should NOT be applied to <tt>label</tt> elements. However in labels of type "Required with help", the help links should be accessible via tab presses on the keyboard. In this case, I'd say the user is wrong and it makes sense for the help link to receive focus before the text item, so that the help relating to the item can be accessed before entering a value. If they can't be convinced of this, then set <tt>tabindex</tt> values for the text items and label help links sequenced so that the items are accessed before the help links.
Maybe you are looking for
-
Linking to a 'living' document in RH 8
Hi All, I posted last week regarding how to link to a living document which is currently sat on a shared drive and accessed by a number of users who update the document regularly. I have tried to link to the document's URL as opposed to the document
-
Stub(Proxy) generation for external Web Service in SAP NW WebAS 6.40
Hi, Can anyone tell me what tool is used to generate the proxy files for accessing any external web services in SAP NetWeaver WebAS 6.40 for JAVA (SAP DevStudio 2.0.5). Do i have to install any components or configuration for using external web servi
-
Global Employment - employee selection in ESS
Hi, We are implementing global employment for ESS. So far everything is working fine, but I have one question. Their is message popup if an employee has multiple employee numbers. The popup comes up correctly but their is a strange message "message.M
-
Is It Possible To Enlarge Thumbnail Display Size Without Enlarging Text On Firefox Window?
Would Like To Enlarge Default Display Size Of Thumbnails, Without Enlarging Text Display. View Menu Allows Screen Component Enlargement But Text Size Becomes Prohibitive.
-
Is there a functional advantage in downloading Lightroom from the Mac app store vs from elsewhere?